| require linux-gbmc.inc |
| |
| KERNEL_VERSION_SANITY_SKIP = "1" |
| LINUX_MAJOR = "6.6" |
| LINUX_VERSION = "${LINUX_MAJOR}.93" |
| PV = "aspeedg7-${LINUX_VERSION}" |
| LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" |
| |
| SRC_URI:prepend = "git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git;protocol=https;branch=linux-${LINUX_MAJOR}.y" |
| SRCREV = "ea583fe68de4fcceaf7131ad55866eafb195c8f2" |
| |
| SRC_URI:append = " \ |
| file://0001-jffs2-add-RENAME_EXCHANGE-support.patch \ |
| file://0001-mux-Make-it-possible-to-select-MULTIPLEXER-if-EXPERT.patch \ |
| file://0001-hwmon-Add-driver-for-MPS-MPQ8785-Synchronous-Step-Do.patch \ |
| file://0001-hwmon-pmbus-Add-ltc4286-driver.patch \ |
| file://0001-hwmon-max34451-Workaround-for-lost-page.patch \ |
| file://0001-PRODKERNEL-platforms-i2c-I2C-over-USB-driver.patch \ |
| file://0001-platforms-i2c-i2c-usb-update-a-few-nits.patch \ |
| " |
| |
| SRC_URI:append:aspeed-g7 = " \ |
| file://aspeed-g7-gbmc.cfg \ |
| " |
| |
| # TODO(b/386134258): ask Aspeed to upstream below |
| # All these dirvers are porting from SDK v09.07 kernel |
| # https://github.com/AspeedTech-BMC/linux/commits/aspeed-master-v6.6/ |
| # SHA: e6cd1b0ff7798c191ddfddeec0b600374a5d2ed9 |
| SRC_URI:append:aspeed-g7 = " \ |
| file://0001-Add-arch-files-for-ast2700.patch \ |
| file://0002-Add-dt-bindings-head-file-for-ast2700.patch \ |
| file://0003-Add-reset-controller-driver-for-ast2700.patch \ |
| file://0004-Add-irqchip-driver-for-ast2700.patch \ |
| file://0005-Add-pinctrl-driver-for-ast2700.patch \ |
| file://0006-Add-clk-driver-for-ast2700.patch \ |
| file://0007-Add-uart-vuart-udma-drvier-for-ast2700.patch \ |
| file://0008-Add-SPI-driver-for-ast2700.patch \ |
| file://0009-Add-watchdog-driver-for-ast2700.patch \ |
| file://0010-Add-net-ftgmac-driver-for-ast2700.patch \ |
| file://0011-Add-gpio-sgpio-driver-for-ast2700.patch \ |
| file://0012-Add-i2c-driver-for-ast2700.patch \ |
| file://0013-Add-emmc-driver-for-ast2700.patch \ |
| file://0014-Add-jtag-driver-for-ast2700.patch \ |
| file://0015-Add-ADC-driver-for-ast2700.patch \ |
| file://0016-Add-RTC-driver-for-ast2700.patch \ |
| file://0017-Add-i3c-driver-for-ast2700.patch \ |
| file://0018-Add-SOC-drivers-for-ast2700.patch \ |
| file://0019-Add-RNG-driver-for-ast2700.patch \ |
| file://0020-Add-crypto-driver-for-ast2700.patch \ |
| file://0021-Add-USB-uhci-ehci-driver-for-ast2700.patch \ |
| file://0022-Add-USB-Virtual-Hub-Controller-driver-for-ast2700.patch \ |
| file://0023-Add-PCIe-RC-driver-for-ast2700.patch \ |
| file://0024-Add-SGMII-and-USB3-phy-driver-for-ast2700.patch \ |
| file://0025-bus-Add-Aspeed-LTPI-bus-controller-driver.patch \ |
| file://0026-Add-LTPI-GPIO-driver-for-ast2700.patch \ |
| file://0027-Add-DRAM-EDAC-driver-for-ast2700.patch \ |
| file://0028-mctp-i3c-MCTP-I3C-driver.patch \ |
| file://0029-soc-aspeed-ast2700-epsi-Fix-eDAF-memory-mapping-in-H.patch \ |
| file://0030-Add-PWM-Rate-of-Change-configuration.patch \ |
| " |
| |
| SRC_URI:append:aspeed-g7 = " \ |
| file://0002-dt-bindings-i3c-hub-Document-I3C-Hub-bindings.patch \ |
| file://0003-i3c-i3c-hub-Add-I3C-Hub-driver.patch \ |
| file://0004-i3c-i3c-hub-Finish-all-work-before-adding-i2c-adapte.patch \ |
| file://0005-i3c-i3c-hub-Wait-rx-done-instead-of-tx-done.patch \ |
| file://0006-i3c-hub-Fix-compilation-error.patch \ |
| file://0009-mipi-i3c-hci-disable-DMA-experimental.patch \ |
| file://0010-Fix-the-i3c-hub-node-mismatch-issue.patch \ |
| file://0011-Prevent-processing-stale-DMA-data-on-spurious-interr.patch \ |
| file://i3c-hub.cfg \ |
| " |
| |
| # Server3.0 ast2750 customized patches |
| SRC_URI:append:aspeed-g7 = " \ |
| file://0027-Add-setting-SGPIO-default-value.patch \ |
| file://0030-data-transfer-to-reserved-memory-for-edaf.patch \ |
| file://0031-8250_aspeed-add-vuart-timeout-width-control-setting.patch \ |
| " |
| |
| KCONFIG_MODE="--allnoconfig" |
| # TODO(b/373416015) Remove this to enable CONFIGCHECK |
| GBMC_CONFIGCHECK = "0" |
