| .. SPDX-License-Identifier: CC-BY-SA-2.0-UK |
| |
| .. |yocto-codename| replace:: whinlatter |
| .. |yocto-ver| replace:: 5.3 |
| .. Note: anchors id below cannot contain substitutions so replace them with the |
| value of |yocto-ver| above. |
| |
| Release notes for |yocto-ver| (|yocto-codename|) |
| ------------------------------------------------ |
| |
| This release does have significant changes which people need to be aware of. See |
| :doc:`the migration guide </migration-guides/migration-5.3>` for more information. |
| |
| New Features / Enhancements in |yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| - Linux kernel 6.16, gcc 15, glibc 2.42, LLVM 21.1.1, and over 300 other |
| recipe upgrades. |
| |
| - Minimum Python version required on the host: 3.9. |
| |
| - Host requirements changes: |
| |
| - The minimum disk space requirement is now 140Gbytes (previously 90Gbytes). |
| |
| - The minimum RAM requirement is now 32Gbytes (previously 8Gbytes). |
| |
| - These changes are mainly due to recent additions of the LLVM and other |
| resource heavy recipes. For guidance on how to limit the resources used by |
| the :term:`OpenEmbedded Build System`, see the |
| :doc:`/dev-manual/limiting-resources` guide. |
| |
| - BitBake changes: |
| |
| - A new ``bitbake-setup`` tool can be used to clone the initial layers and |
| setup the environment. See the :doc:`/brief-yoctoprojectqs/index` section |
| for instructions on how to build an image that uses the :term:`Poky` |
| distribution with this new tool. |
| |
| See the reference documentation of ``bitbake-setup`` at |
| :doc:`bitbake:bitbake-user-manual/bitbake-user-manual-environment-setup`. |
| |
| - ``codeparser``: Add function decorators for ``vardeps`` |
| |
| Adds ``bb.parse.vardeps`` and ``bb.parse.excludevardeps`` function |
| decorators that can be used to explicitly add or exclude variables from a |
| Python function parsed by :term:`BitBake`. |
| |
| Move ``vardepexclude`` flag entries alongside functions for |
| maintainability. |
| |
| - Fetcher: |
| |
| - Check for ``git-lfs`` existence before using it. |
| |
| - Add support for ``.debs`` files containing uncompressed data tarballs. |
| |
| - ``az``: Add sanity check to check that :term:`AZ_SAS` starts with ``?`` |
| to mark the start of the query parameters. |
| |
| - ``git``: |
| |
| - Add the tag to shallow clone tarball name. |
| - Verify if local clones contains a tag, when the ``tag=`` parameter |
| is used in :term:`SRC_URI`. |
| |
| - ``knotty``: |
| |
| - Pass failed task logs through the log infrastructure (use |
| ``bb.plain()`` instead of ``print()``). |
| |
| - Improve refresh rate of the footer progress bar. |
| |
| - Add support for automatically promoting class inherits to deferred |
| inherits by listing them in the :term:`BB_DEFER_BBCLASSES` variable. |
| |
| - "Built-in" fragments support is now added to the :ref:`addfragments |
| <bitbake-user-manual/bitbake-user-manual-metadata:\`\`addfragments\`\` |
| directive>` directive. This is the fourth parameter to this directive, and |
| should be the name of the variable that contains definitions of built-in |
| fragments. Refer to the documentation of :ref:`addfragments |
| <bitbake-user-manual/bitbake-user-manual-metadata:\`\`addfragments\`\` |
| directive>` to learn how to define new built-in fragments. |
| |
| Listing these built-in fragments can be done with |
| :oe_git:`bitbake-config-build |
| list-fragments</bitbake/tree/bin/bitbake-config-build>`, which could |
| list:: |
| |
| Available built-in fragments: |
| machine/... Sets MACHINE = ... |
| distro/... Sets DISTRO = ... |
| |
| In the above example, this means that the :term:`MACHINE` of |
| :term:`DISTRO` can be overridden with:: |
| |
| OE_FRAGMENTS += "machine/qemuarm64 distro/poky-bleeding" |
| |
| This would set :term:`MACHINE` to ``qemuarm64`` and the :term:`DISTRO` to |
| ``poky-bleeding``. |
| |
| - The ``tag-`` parameter in URLs can now be specified alongside the ``rev=`` |
| parameter and :term:`SRCREV` variable, and will ensure that the |
| specified tag matches the specified revision. |
| |
| It is **strongly encouraged** to include the ``tag=`` parameter to the |
| :term:`SRC_URI` definition when possible. |
| |
| - ``tinfoil``: add a ``wait_for`` decorator to wrap a function that makes an |
| asynchronous tinfoil call wait for event to say that the call has been |
| successful, or an error has occurred. |
| |
| - New ``bb.utils.to_filemode()`` helper function which is a helper to take a |
| variable's content containing a filemode and convert it to the proper |
| Python representation of the number. |
| |
| - ``cooker``: Use a shared counter for processing parser jobs. This allows |
| the parser processes to run independently of needing to be feed by the |
| parent process, and load balances them much better. |
| |
| - ``cooker/process/utils``: Add a ``-P`` (``--profile``) option to |
| :term:`BitBake` to specify what to profile. Can be "main", "idle" or |
| "parsing". Split the reports in separate files. |
| |
| - A "filtering" functionality was added and allows modifying the value of a |
| variable before its value is returned by :term:`BitBake`. The |
| ``setVarFilter`` API can be used for applying the filters, but it is |
| **not** recommended for general use. It was added for internal use in |
| the :term:`OpenEmbedded Build System` in the :ref:`ref-classes-native` |
| class. The list of filters that are allowed are derived from a select |
| list of functions that must be added using a ``filter_proc`` decorator. |
| |
| - ``tests/parse``: Add tests for ``include``, ``require`` and |
| ``include_all``. |
| |
| - Toolchain changes: |
| |
| - The Clang/LLVM toolchain can now be used as part of the build. |
| |
| The :term:`PREFERRED_TOOLCHAIN_TARGET`, :term:`PREFERRED_TOOLCHAIN_NATIVE` |
| and :term:`PREFERRED_TOOLCHAIN_SDK` variables can be used to customize the |
| selected toolchain globally. |
| |
| There are two supported toolchains: "gcc" and "clang". See the |
| documentation of :term:`PREFERRED_TOOLCHAIN_TARGET` for more details. |
| |
| The toolchain is also customizable on a per-recipe basis, using the |
| :term:`TOOLCHAIN` and :term:`TOOLCHAIN_NATIVE` variables. |
| |
| .. warning:: |
| |
| The :term:`TOOLCHAIN` should **not** be set globally. For overriding |
| the toolchain globally, use :term:`PREFERRED_TOOLCHAIN_TARGET`, |
| :term:`PREFERRED_TOOLCHAIN_NATIVE` and :term:`PREFERRED_TOOLCHAIN_SDK`. |
| |
| - Multiple recipes were pinned to use the GCC/Binutils toolchain as they do |
| not support being built with Clang/LLVM yet. In these recipes the |
| :term:`TOOLCHAIN` variable is set to "gcc". |
| |
| - Global configuration changes: |
| |
| - ``bitbake.conf/pseudo``: Switch from exclusion list to inclusion list by |
| swapping :term:`PSEUDO_IGNORE_PATHS` for :term:`PSEUDO_INCLUDE_PATHS` |
| which should be easier and more explicit to maintain. |
| |
| - ``bitbake.conf``: Drop ``lz4`` from :term:`HOSTTOOLS`, as it is not |
| required anymore, and the ``lz4-native`` package is used instead. |
| |
| - :term:`Configuration Fragments <Configuration Fragment>`: |
| |
| - Add a fragment for the `CDN` :ref:`sstate-cache |
| <overview-manual/concepts:shared state cache>` mirror. |
| |
| - Add a ``show-fragments`` sub-command to the |
| :oe_git:`bitbake-config-build </bitbake/tree/bin/bitbake-config-build>` |
| utility, to show the content of fragments from command-line. |
| |
| - ``default-distrovars``: set an empty default for :term:`LICENSE_PATH`. |
| |
| - The default definition of :term:`UNPACKDIR` is no longer |
| ``sources-unpack`` but ``sources``. |
| |
| - The default value for :term:`IMAGE_FSTYPES` (defined in |
| :oe_git:`bitbake.conf </openembedded-core/tree/meta/conf/bitbake.conf>`) |
| is now ``tar.zst`` (previously ``tar.gz``). |
| |
| - Remove the ``meta/conf/distro/include/distro_alias.inc`` include file, |
| which associated a recipe name to one or more Distribution package name. |
| This file is not used and maintained anymore. |
| |
| - A new configuration file :ref:`structure-build-conf-toolcfg.conf` is now |
| used by :oe_git:`bitbake-config-build </bitbake/tree/bin/bitbake-config-build>` |
| to manage :term:`Configuration Fragments <Configuration Fragment>`. |
| |
| - ``bitbake.conf``: add :term:`TMPDIR` to the ``GIT_CEILING_DIRECTORIES`` |
| Git variable. This avoids Git trying to find a repository higher than |
| :term:`TMPDIR` in recipes that use the :ref:`structure-build-work-shared` |
| directory for storing their sources. This fixes reproducibility issues. |
| |
| - Changes to the ``genericarm64`` machine configuration: |
| |
| - Increase the :term:`Initramfs` maximum size. |
| - Install extra Linux firmware packages to fix Linux kernel warnings. |
| |
| - New variables: |
| |
| - The ``VIRTUAL-RUNTIME_dbus`` variable, to allow changing the runtime |
| implementation of D-Bus. See :term:`VIRTUAL-RUNTIME`. |
| |
| - The ``VIRTUAL-RUNTIME_libsdl2`` variable, to allow changing the runtime |
| implementation of `libsdl2 <https://www.libsdl.org/>`__. See |
| :term:`VIRTUAL-RUNTIME`. |
| |
| - The :term:`SPDX_PACKAGE_URL` variable can be used in recipes to set the |
| output ``software_packageUrl`` field in their associated SPDX 3.0 output |
| (default value: empty string). |
| |
| - The :term:`KMETA_CONFIG_FEATURES` variable can be used to control |
| :ref:`ref-classes-kernel-yocto` configuration features. For now only |
| ``prefer-modules`` is supported for this variable. |
| |
| - The :term:`TESTSDK_SUITES` variable can be used to control the list of |
| tests run for the :ref:`ref-classes-testsdk` class. |
| |
| - The :term:`UBOOT_FIT_CONF_FIRMWARE` can be used to specify a ``firmware`` |
| entry in the configuration node of a FIT image. |
| |
| - The :term:`SPDX_INCLUDE_COMPILED_SOURCES` option allows the same as |
| :term:`SPDX_INCLUDE_SOURCES` but including only the sources used to |
| compile the host tools and the target packages. |
| |
| - The :term:`UBOOT_VERSION` variable holds the package version |
| (:term:`PV`) and revision (:term:`PR`) which are part of the installed and |
| deployed filenames. Users can now override :term:`UBOOT_VERSION` to |
| changes the output filenames. |
| |
| - The :term:`UBOOT_MAKE_OPTS` variable specifies extra options passed to |
| ``make`` when building U-boot. Extra options can also be passed as the |
| fourth argument of the :term:`UBOOT_CONFIG` variable. See the |
| documentation of :ref:`ref-classes-uboot-config` class for more details. |
| |
| - The :term:`WESTON_USER` and :term:`WESTON_USER_HOME` variables can be |
| used to define the username and home directory for the `Weston` user. |
| |
| - New core tasks: |
| |
| - The :ref:`ref-tasks-list_image_features` can be used to list the available |
| :term:`IMAGE_FEATURES` for an image recipe. |
| |
| - Kernel-related changes: |
| |
| - Support for the 6.17 kernel exists but 6.16 is the default selected one in |
| the :term:`Poky` distro. |
| |
| - ``linux/generate-cve-exclusions``: use data from CVEProject instead of |
| the archived https://linuxkernelcves.com. |
| |
| - ``kernel-yocto``: allow annotated options to be modified. For example if |
| the following kernel configuration is set:: |
| |
| CONFIG_INET_TUNNEL=y # OVERRIDE:$MODULE_OR_Y |
| |
| And if the :term:`KMETA_CONFIG_FEATURES` variable contains |
| ``prefer-modules``, ``CONFIG_INET_TUNNEL`` will be set to ``m`` instead of |
| ``y``. |
| |
| - ``kernel-devsrc``: Replace the extra ``System.map`` file with symbolic |
| link. |
| |
| - ``kernel-module-split``: Allow for external configuration files being |
| assigned to the correct kernel module package. |
| |
| - When built for the RISC-V architecture, ensure that the minimum required |
| features set by :term:`TUNE_FEATURES` are set using the |
| :ref:`ref-classes-features_check` class. |
| |
| - ``linux-yocto``: when built for RISC-V, enable features in |
| :term:`KERNEL_FEATURES` based on features listed in :term:`TUNE_FEATURES`. |
| |
| - ``perf``: Enable ``coresight`` if enabled in :term:`MACHINE_FEATURES`. |
| |
| - New core recipes: |
| |
| - ``python3-pdm``, ``python3-pdm-backend`` and ``python3-pdm-build-locked``, |
| which are dependencies of ``python3-webcolors``. ``python3-pdm`` itself |
| depends on ``python3-pdm-build-locked`` |
| |
| - ``bindgen-cli``: a tool to generate Rust bindings. |
| |
| - ``python3-colorama``: Cross-platform colored terminal text, needed by |
| ``pytest`` as a dependency. |
| |
| - ``libglvnd``: imported from :oe_git:`meta-oe |
| </meta-openembedded/tree/meta-oe>` which provides a vendor neutral |
| approach to handling OpenGL / OpenGL ES / EGL / GLX libraries. |
| |
| - ``python3-sphinx-argparse``: A sphinx extension that automatically |
| documents ``argparse`` commands and options. It is part of |
| ``buildtools-docs-tarball`` for later use in the Yocto Project |
| documentation. |
| |
| - ``python3-sphinx-copybutton``: A sphinx extension that adds a copy button |
| to code blocks in Sphinx. It is part of ``buildtools-docs-tarball`` for later |
| use in the Yocto Project documentation. |
| |
| - ``python3-coherent-licensed``: License management tooling for `Coherent |
| System` and skeleton projects. It became a new dependency of |
| ``python3-zipp``. |
| |
| - ``gn``: a commonly used build tool to generate `ninja |
| <https://ninja-build.org/>`__ files. |
| |
| - LLVM/Clang related recipes: |
| |
| - ``clang``: LLVM based C/C++ compiler. |
| |
| - ``compiler-rt``: LLVM based C/C++ compiler Runtime. |
| |
| - ``libclc``: Implementation of the library requirements of the OpenCL C |
| programming language. |
| |
| - ``libcxx``: new implementation of the C++ standard library, targeting |
| C++11 and above |
| |
| - ``llvm-tblgen-native``: LLVM TableGen binaries for the build host, |
| often used to build LLVM projects. |
| |
| - ``lld``: the LLVM Linker. |
| |
| - ``lldb``: LLDB debugger for LLVM projects. |
| |
| - ``llvm-project-source``: canonical git mirror of the LLVM subversion |
| repository. |
| |
| - ``llvm``: The LLVM Compiler Infrastructure. |
| |
| - ``openmp``: LLVM OpenMP compiler Runtime. |
| |
| - ``kernel-signing-keys-native``: this recipe is used in the |
| :ref:`ref-classes-kernel-fit-image` class to generate a pair of RSA |
| public/private key. It replaces the ``do_generate_rsa_keys`` of the |
| :ref:`ref-classes-kernel-fit-image` class. |
| |
| - New :term:`DISTRO_FEATURES`: |
| |
| - ``glvnd``, which enables OpenGL Vendor Neutral Dispatch Library |
| support when using recipes such as ``mesa``. |
| |
| - ``opencl``: support for the :wikipedia:`OpenCL (Open Computing Language) |
| <OpenCL>` framework. |
| |
| - New core classes: |
| |
| - The new :ref:`ref-classes-kernel-fit-image` class replaces the previous |
| ``kernel-fitimage`` class. It has been rewritten and improved to fix |
| :yocto_bugs:`bug 12912</show_bug.cgi?id=12912>`. See the :ref:`Removed |
| Classes <migration-guides/migration-5.3:Removed Classes>` section of the |
| Migration notes for |yocto-ver| (|yocto-codename|) for more details on how |
| to switch to this new class. |
| |
| - The new :ref:`ref-classes-go-mod-update-modules` class can be used to |
| maintain Go recipes that use a ``BPN-go-mods.inc`` and |
| ``BPN-licenses.inc`` and update these files automatically. |
| |
| - The new :ref:`ref-classes-python_pdm` class supports building Python |
| recipes with the `PDM <https://pdm-project.org/>`__ package and dependency |
| manager. |
| |
| - Architecture-specific changes: |
| |
| - Rework the RISC-V :term:`TUNE_FEATURES` to make them based of the RISC-V |
| ISA (Instruction Set Architecture) implementation. |
| |
| This implements the following base ISAs: |
| |
| - ``rv32i``, ``rv64i`` |
| - ``rv32e``, ``rv64i`` |
| |
| The following ABIs: |
| |
| - ``ilp32``, ``ilp32e``, ``ilp32f``, ``ilp32d`` |
| - ``lp64``, ``lp64e``, ``lp64f``, ``lp64d`` |
| |
| The following ISA extension are also implemented: |
| |
| - M: Integer Multiplication and Division Extension |
| - A: Atomic Memory Extension |
| - F: Single-Precision Floating-Point Extension |
| - D: Double-Precision Floating-Point Extension |
| - C: Compressed Extension |
| - B: Bit Manipulation Extension (implies Zba, Zbb, Zbs) |
| - V: Vector Operations Extension |
| - Zicsr: Control and Status Register Access Extension |
| - Zifencei: Instruction-Fetch Fence Extension |
| - Zba: Address bit manipulation extension |
| - Zbb: Basic bit manipulation extension |
| - Zbc: Carry-less multiplication extension |
| - Zbs: Single-bit manipulation extension |
| - Zicbom: Cache-block management extension |
| |
| The existing processors tunes are preserved: |
| |
| - ``riscv64`` (``rv64gc``) |
| - ``riscv32`` (``rv32gc``) |
| - ``riscv64nf`` (``rv64imac_zicsr_zifencei``) |
| - ``riscv32nf`` (``rv32imac_zicsr_zifencei``) |
| - ``riscv64nc`` (``rv64imafd_zicsr_zifencei``) |
| |
| See :oe_git:`meta/conf/machine/include/riscv/README |
| </openembedded-core/tree/meta/conf/machine/include/riscv/README>` for more |
| information. |
| |
| - Add support for new Arm64 instruction sets, which are represented as files |
| to be included in :term:`MACHINE` configuration in :term:`OpenEmbedded-Core |
| (OE-Core)`. The new configuration files are: |
| |
| - :oe_git:`conf/machine/include/arm/arch-armv8-7a.inc </openembedded-core/tree/meta/conf/machine/include/arm/arch-armv8-7a.inc>` |
| - :oe_git:`conf/machine/include/arm/arch-armv8-8a.inc </openembedded-core/tree/meta/conf/machine/include/arm/arch-armv8-8a.inc>` |
| - :oe_git:`conf/machine/include/arm/arch-armv9-1a.inc </openembedded-core/tree/meta/conf/machine/include/arm/arch-armv9-1a.inc>` |
| - :oe_git:`conf/machine/include/arm/arch-armv9-2a.inc </openembedded-core/tree/meta/conf/machine/include/arm/arch-armv9-2a.inc>` |
| - :oe_git:`conf/machine/include/arm/arch-armv9-3a.inc </openembedded-core/tree/meta/conf/machine/include/arm/arch-armv9-3a.inc>` |
| |
| - ``arch-mips.inc``: Use ``-EB``/``-EL`` for denoting Endianness. |
| |
| - Enable ``riscv32`` as supported arch for ``musl`` systems. |
| |
| - Powerpc: Use ``-maltivec`` in compiler flags if ``altivec`` is in |
| :term:`TUNE_FEATURES`. |
| |
| - ``arm``: add a ``nocrypto`` feature to :term:`TUNE_FEATURES` to complement |
| the ``crypto`` feature to explicitly disable cryptographic extensions via |
| `GCC` flags. |
| |
| This lead to the creation of two new tunes: |
| |
| - ``tune-cortexa72-nocrypto`` |
| - ``tune-cortexa53-nocrypto`` |
| |
| - QEMU / ``runqemu`` changes: |
| |
| - Refactor :ref:`ref-classes-qemu` functions into library functions (in |
| :oe_git:`lib/oe/qemu.py </openembedded-core/tree/meta/lib/oe/qemu.py>`). |
| |
| - The ``qemux86-64`` :term:`MACHINE` now defaults to the ``x86-64-v3`` |
| micro-architecture level. |
| |
| The previous default was Core 2 era processors. This change means that the |
| toolchain is configured to build for that level, and QEMU is configured to |
| emulate it. |
| |
| The v3 level adds support for AVX/AVX2/BMI/BMI2/F16C and other newer |
| instructions which are seeing increasing usage in modern software and add |
| performance benefits. Please see :wikipedia:`X86-64 Microarchitecture |
| levels <X86-64#Microarchitecture_levels>` for definition of the levels and |
| lists of Intel/AMD CPUs where support for the instructions was first |
| added. |
| |
| Note that if QEMU system emulation is used on an x86 build machine with |
| :wikipedia:`KVM <Kernel-based_Virtual_Machine>` enabled, then the build |
| machine's CPU must also be recent enough to support these instructions |
| natively. |
| |
| - ``runqemu``: |
| |
| - The script can now run compressed images with snapshot mode. For |
| example, with :term:`IMAGE_FSTYPES` containing ``ext4.zst``, you can run:: |
| |
| runqemu snapshot ext4.zst <image-recipe> |
| |
| - Add support for the ``erofs`` filesystem. |
| |
| - The :term:`BitBake` environment is now a requirement, and the script |
| cannot run without a successful call to ``bitbake -e``. |
| |
| The script will also raise an error with the ``bitbake`` command is not |
| found. |
| |
| - Documentation changes: |
| |
| - Add documentation on :term:`Configuration Fragments <Configuration |
| Fragment>`: |
| |
| - :doc:`/ref-manual/fragments` |
| - :doc:`/dev-manual/creating-fragments` |
| |
| - Part of :term:`BitBake` internals are now documented at |
| :yocto_docs:`/bitbake/bitbake-user-manual/bitbake-user-manual-library-functions.html`. |
| |
| - A new :doc:`/dev-manual/limiting-resources` guide was created to help |
| users limit the resources used by the :term:`OpenEmbedded Build System`. |
| |
| - A new :doc:`/dev-manual/hashequivserver` guide was created to help users |
| setting up a :ref:`overview-manual/concepts:Hash Equivalence` server. |
| |
| - The QA checks defined in the :term:`OpenEmbedded Build System` were |
| gathered in :doc:`/ref-manual/qa-checks`. |
| |
| - A new :doc:`/dev-manual/poky-manual-setup` document was added to instruct |
| how to setup the :term:`Poky` reference distribution manually, after the |
| :ref:`master branch of the Poky repository has stopped being updated |
| <migration-guides/migration-5.3:The Poky repository master branch is no |
| longer updated>`. |
| |
| - Core library changes: |
| |
| - Add :oe_git:`license_finder.py </openembedded-core/tree/meta/lib/oe/license_finder.py>`, |
| which was extracted from ``recipetool`` to be shared for multiple users. |
| Improve its functionalities. |
| |
| - Go changes: |
| |
| - :ref:`ref-classes-go-mod-update-modules`: Update license finding to use |
| the new ``find_licenses_up`` library function. |
| |
| - Rust changes: |
| |
| - The rust-llvm recipe has been removed, and the rust recipe now uses the |
| same llvm recipe as clang. |
| |
| - Add the ``has-thread-local`` option to the |
| :ref:`ref-classes-rust-target-config` class. |
| |
| - Wic Image Creator changes: |
| |
| - After a Python upgrade, WIC plugins containing dashes (``-``) for their |
| filenames are **no longer supported**. One must convert the dashed to |
| underscores (``_``) and update users of the plugins accordingly. |
| |
| See the :ref:`migration-guides/migration-5.3:Wic plugins containing dashes |
| should be renamed` section of the Yocto Project 5.3 Migration Guide for |
| more information. |
| |
| - ``wic``: do not ignore :term:`IMAGE_ROOTFS_SIZE` if the Rootfs is |
| modified. |
| |
| - Several improvements in WIC selftests. |
| |
| - ``bootimg_efi.py``: fail build if no binaries are installed. |
| |
| - Add new options to the ``wic`` ``ls``, ``cp``, ``rm``, and ``write`` |
| commands: |
| |
| - ``--image-name``: name of the image to use the artifacts from. |
| - ``--vars``: directory with ``<image>.env`` files that store |
| :term:`BitBake` variables. This directory is usually found in |
| :term:`STAGING_DIR`. |
| |
| - Add the Wic-specific option ``--extra-partition-space`` to add extra empty |
| space after the space filled by the filesystem in the partition. |
| |
| - The Wic-specific option ``--extra-space`` has a new alias |
| ``--extra-filesystem-space``. |
| |
| - ``bootimg_pcbios``: move Syslinux install into separate functions, to make |
| it easier to add new bootloaders. |
| |
| The Grub bootloader can now be installed with this Wic plugin. |
| |
| - Add the Wic plugin ``extra_partition`` to install files from the |
| :term:`DEPLOY_DIR_IMAGE` directory into an extra non-rootfs partition. See the |
| :term:`IMAGE_EXTRA_PARTITION_FILES` variable for more information. |
| |
| - The ``--diskid`` option was added to allow passing a :wikipedia:`MS-DOS |
| <MS-DOS>` or :wikipedia:`GPT <GUID_Partition_Table>`-formatted |
| disk IDs for a partition (for example: ``deadbeef-cafe-babe-f00d-cec2ea4eface``). |
| |
| - SDK-related changes: |
| |
| - Include additional information about Meson setting in the SDK environment |
| setup script (host system, CPU family, etc.). |
| |
| - Add Go to :term:`SDK_TOOLCHAIN_LANGS`, except for the following |
| architecture on which this is not supported: |
| |
| - RISC-V 32 bits (``rv32``) |
| - PowerPC |
| |
| - Image-based SDKs can now include `Zsh` completions by adding the |
| ``zsh-completion-pkgs`` feature to the :term:`IMAGE_FEATURES` variable in |
| the image recipe. |
| |
| - The SDK build is now part of the :ref:`ref-classes-buildhistory` |
| difference analysis (``buildhistory-diff`` command). |
| |
| - Testing-related changes: |
| |
| - ``bitbake/tests/fetch``: Add tests for ``gitsm`` with git-lfs. |
| |
| - ``bitbake/lib/bb/tests/fetch``: add a test case to ensure Git shallow |
| fetch works for tag containing slashes. |
| |
| - :ref:`ref-classes-testexport`: capture all tests and data from all layers |
| (instead of the :term:`OpenEmbedded-Core (OE-Core)` layer only). |
| |
| - OEQA: |
| |
| - SDK: |
| |
| - Add a test to sanity check that the generated SDK manifest was |
| parsed correctly and isn't empty. |
| |
| - Add a test to verify the manifests are generated correctly. |
| |
| - Add helpers to check for and install packages. |
| |
| - Add check that meson has detected the target correctly. |
| |
| - Simplify test specification and discovery: |
| |
| - Introduce the ``TESTSDK_CASE_DIRS`` variable to specify test |
| directory types, replacing the need to modify the ``default_cases`` |
| class member. |
| |
| - Discover tests from configured layers using a common discovery |
| pattern (``<LAYER_DIR>/lib/oeqa/<dirname>/cases``) where |
| ``<dirname>`` is specified in ``TESTSDK_CASE_DIRS``. |
| |
| - The "buildtools" directories were renamed to follow the common |
| discovery pattern (``<LAYER_DIR>/lib/oeqa/<dirname>/cases``) for |
| consistency across all SDK configurations. |
| |
| - ``selftest/reproducible``: Limit memory used by ``diffoscope`` to avoid |
| triggering OOM kills. |
| |
| - Add tests for the :ref:`ref-classes-devicetree` class. |
| |
| - Tests for the :ref:`ref-classes-kernel-fit-image` class have been |
| reworked and improved. |
| |
| - ``data.py``: add ``skipIfNotBuildArch`` decorator, to skip tests if |
| :term:`BUILD_ARCH` is not in present in the specified tuple. |
| |
| - ``selftest``: add new test for toolchain switching. |
| |
| - ``utils/command``: add a fast-path ``get_bb_var()`` that uses |
| ``bitbake-getvar`` instead of ``bitbake -e`` when there is not |
| ``postconfig`` argument passed. |
| |
| - ``core/case``: add file exists assertion test case. |
| |
| - ``context.py``: use :term:`TEST_SUITES` if set. |
| |
| - ``runqemu``: add new test for booting compressed images. |
| |
| - General improvements of the parallelization of tests, namely fixing |
| some tests that could spawn an unlimited number of threads leading to |
| OOM kills. |
| |
| - A new SDK test is now running for Go after ``go`` was added to |
| :term:`SDK_TOOLCHAIN_LANGS`. |
| |
| - Commands sent over SSH (using the ``OESSHTarget`` class) will now error |
| when an SSH failure occurs. It is possible to ignore these errors by |
| passing ``ignore_ssh_fails`` when executing a command. |
| |
| - Utility script changes: |
| |
| - ``sstate-cache-management``: add a ``--dry-run`` argument |
| |
| - ``yocto-check-layer``: |
| |
| - Expect success for ``test_patches_upstream_status``. This means that |
| patch files *must* include an ``Upstream-Status`` to pass with this |
| script. |
| |
| - Show the :term:`DISTRO` used when running the script. |
| |
| - :ref:`ref-classes-yocto-check-layer` class: |
| |
| - Refactor to be extended easily. |
| |
| - Add a ``check_network_flag`` test that checks that no tasks other |
| than :ref:`ref-tasks-fetch` can access the network. |
| |
| - ``send-error-report``: |
| |
| - Respect URL scheme in server name if it exists. |
| |
| - Drop ``--no-ssl`` as the server URL specifies it with ``http://`` or |
| ``https://``. |
| |
| - ``buildstats.py``: |
| |
| - Extend disk stats support for NVMe and flexible token count. |
| |
| - Add tracking of network I/O per interface. |
| |
| - ``buildstats-diff``: find last two Buildstats files if none are specified. |
| |
| - ``pybootchartgui``: |
| |
| - visualize ``/proc/net/dev`` network stats in graphs. |
| |
| - account for network statistics when calculating extents. |
| |
| - Packaging changes: |
| |
| - Export ``debugsources`` in :term:`PKGDESTWORK` as JSON. The source |
| information used during packaging can be use from other tasks to have more |
| detailed information on the files used during the compilation and improve |
| SPDX accuracy. |
| |
| - When using the ``ipk`` and ``rpm`` package managers, give out more possible |
| reasons about unmatched packages. |
| |
| For example:: |
| |
| E: Package 'catch2' has no installation candidate |
| catch2 is a recipe. Its generated packages are: ['catch2-src', 'catch2-dbg', 'catch2-staticdev', 'catch2-dev', 'catch2-doc'] |
| Either specify a generated package or set ALLOW_EMPTY:${PN} = "1" in catch2 recipe |
| |
| - ``package.py``: replace all files unconditionally when copying debug |
| sources (passing ``-u`` to the ``cpio`` command in |
| ``copydebugsources()``). This improves reproducibility. |
| |
| - LLVM related changes: |
| |
| - Like ``gcc-source``, the LLVM project sources are part of ``work-shared`` |
| under :term:`TMPDIR`. The project codebase is large and sharing it offers |
| performance improvements. |
| |
| - SPDX-related changes: |
| |
| - ``spdx30``: Provide ``software_packageUrl`` field |
| |
| - ``spdx30_tasks``: Change recipe license to "declared" (instead of |
| "concluded") |
| |
| - ``create-spdx-2.2``: support to override the version of a package in SPDX |
| 2 through :term:`SPDX_PACKAGE_VERSION`. |
| |
| - ``devtool`` and ``recipetool`` changes: |
| |
| - Use ``lib/oe/license_finder`` to extract the license from source code. |
| |
| - Calculate source paths relative to :term:`UNPACKDIR`. |
| |
| - Allow ``recipe create`` handlers to specify bitbake tasks to run. |
| |
| - ``create_go``: Use :ref:`ref-classes-go-mod` class instead of |
| :ref:`ref-classes-go-vendor`. |
| |
| - Go recipes are now generated with help of the new |
| :ref:`ref-classes-go-mod-update-modules` class. |
| |
| - Add a new :oe_git:`improve_kernel_cve_report.py |
| </openembedded-core/tree/meta/scripts/contrib/improve_kernel_cve_report.py>` |
| script in ``scripts/contrib`` for post-processing of kernel CVE data. |
| |
| - Handle workspaces for multiconfig. |
| |
| - Fix upgrade for recipes with Git submodules. |
| |
| - Patchtest-related changes: |
| |
| - Multiple improvements to the tool's :oe_git:`README |
| </openembedded-core/tree/scripts/patchtest.README>`. |
| |
| - Don't match :term:`BitBake` Python expansions as GitHub usernames |
| (``${@...}`` syntax). |
| |
| - Security changes: |
| |
| - ``openssl``: add FIPS support. This can be enabled through the ``fips`` |
| :term:`PACKAGECONFIG`. |
| |
| - The default :term:`Poky` template configuration |
| (:yocto_git:`local.conf.sample </meta-yocto/commit/meta-poky/conf/templates/default/local.conf.sample?id=b3b659263566c4d2f2813190e72d93f8598a4c47>`) |
| does not define the ``allow-empty-password``, ``empty-root-password``, and |
| ``allow-root-login`` in :term:`EXTRA_IMAGE_FEATURES` anymore. |
| |
| - :term:`Toaster` changes: |
| |
| - Adapt it for :doc:`bitbake-setup |
| <bitbake:bitbake-user-manual/bitbake-user-manual-environment-setup>`. |
| |
| - Remove hard dependency on the :term:`Poky` repository, as its :ref:`master |
| branch is no longer updated <migration-guides/migration-5.3:The Poky |
| repository master branch is no longer updated>`. |
| |
| - ``cve-check`` class changes: |
| |
| - ``cve-update-db-native``: FKIE: use Secondary metric if there is no |
| Primary metric. |
| |
| - New :term:`PACKAGECONFIG` options for individual recipes: |
| |
| - ``ppp``: ``l2tp``, ``pptp`` |
| - ``dropbear``: ``x11`` (renamed from ``enable-x11-forwarding``) |
| - ``gdb``: ``source-highlight`` |
| - ``gstreamer1.0-plugins-bad``: ``analytics`` |
| - ``mtd-utils``: ``ubihealthd-service`` |
| - ``openssl``: ``fips`` |
| - ``qemu``: ``sdl-image``, ``pixman`` |
| - ``wget``: ``pcre2`` |
| - ``mesa``: ``asahi``, ``amd``, ``svga``, ``teflon``, ``nouveau``, |
| ``xmlconfig`` |
| - ``dbus``: ``traditional-activation``, ``message-bus`` |
| - ``cmake``: ``debugger`` |
| - ``libcxx``: ``unwind-cross`` |
| - ``tiff``: ``lerc`` |
| - ``freetype``: ``brotli`` |
| - ``gawk``: ``pma-if-64bit`` |
| - ``x264``: ``ffmpeg``, ``opencl`` |
| |
| - Systemd related changes: |
| |
| - Enable getty generator by default by adding ``serial-getty-generator`` to |
| :term:`PACKAGECONFIG`. |
| |
| - Now uses the :term:`USE_NLS` variable to enable or disable building |
| translations. |
| |
| - Fix deduplicated templates and instance lines in preset files when listing |
| both template and instances in :term:`SYSTEMD_SERVICE`. |
| |
| - Stop enabling non-standard MAC policy when using the 'pni-names' feature |
| (part of :term:`DISTRO_FEATURES`). Instead, follow what is provided by |
| upstream systemd. |
| |
| - Install ``systemd-sysv-install`` when using the |
| ``systemd-systemctl-native`` recipe. |
| |
| - :ref:`ref-classes-sanity` class changes: |
| |
| - :ref:`ref-classes-insane`: Move test for invalid :term:`PACKAGECONFIG` to |
| :ref:`ref-tasks-recipe-qa`. |
| |
| - Add ``unimplemented-ptest`` detection for cargo-based tests, allowing to |
| detect when a cargo package has available tests that could be enable with |
| :doc:`Ptest </test-manual/ptest>`. |
| |
| - Add a test for recipe naming/class mismatches. |
| |
| - Add a sanity test for "bad" gcc installs on Ubuntu 24.04. The host should |
| install ``libstdc++-14-dev`` instead of ``libgcc-14-dev`` to avoid build |
| issues when building :ref:`ref-classes-native` with Clang. |
| |
| - Drop the ``var-undefined`` QA check as it was not relevant for the |
| variables it was checking, as those are mandatory by default. |
| |
| - U-boot related changes: |
| |
| - :ref:`ref-classes-uboot-sign`: Add support for setting firmware property |
| in FIT configuration with :term:`UBOOT_FIT_CONF_FIRMWARE`. |
| |
| - :ref:`ref-classes-uboot-sign`: Add support for signing U-Boot FIT image |
| without an SPL. The :term:`SPL_DTB_BINARY` variable can be set to an empty |
| string to indicate that no SPL is present. |
| |
| - When built for the RISC-V architecture, read the :term:`TUNE_FEATURES` |
| variable to automatically set U-boot configuration options (for example |
| ``CONFIG_RISCV_ISA_F``). |
| |
| - Improve the way build directories are split when having multiple |
| configurations listed in :term:`UBOOT_CONFIG`. This fixes an issue where |
| two or more of these configurations were using the same directory for |
| building (because these were using the same defconfig file). |
| |
| - Miscellaneous changes: |
| |
| - ``dropbear``: The ``dropbearkey.service`` can now take extra arguments for |
| key generation, through ``/etc/default/dropbear``. |
| |
| - ``initscripts``: add ``log_success_msg``/``log_failure_msg``/``log_warning_msg`` |
| functions for logging in initscripts. |
| |
| - ``connman``: |
| |
| - Mark ``iptables`` and ``nftables`` feature of :term:`PACKAGECONFIG` |
| mutually incompatible. |
| |
| - Set ``dns-backend`` automatically to ``systemd-resolved`` |
| when ``systemd-resolved`` is part of :term:`DISTRO_FEATURES`. |
| |
| - ``uninative``: show errors if installing fails. |
| |
| - ``meson``: Allow user to override setup command options by exporting |
| ``MESON_SETUP_OPTS`` in a recipe. |
| |
| - :ref:`ref-classes-cmake`: Enhance to emit a native toolchain CMake file. |
| This is part of improvements allowing to use ``clang`` in an SDK. |
| |
| - Fix the runtime version of several recipes (they now return the effective |
| version instead of a default string like "Unknown"). |
| |
| - :ref:`ref-classes-module`: add ``KBUILD_EXTRA_SYMBOLS`` to the install |
| command. |
| |
| - ``rpm-sequoia``: add :doc:`Ptest </test-manual/ptest>` support. |
| |
| - ``libunwind``: disable installation of tests directory with |
| ``--disable-tests``, which can be installed with the ``libunwind-ptest`` |
| package instead. |
| |
| - ``boost``: add ``process`` library to the list of built libraries. |
| |
| - ``base-files``: add ``nsswitch-resolved.conf``, only installed if |
| ``systemd`` and ``systemd-resolved`` is part of :term:`DISTRO_FEATURES`. |
| |
| - ``nfs-utils``: don't use signals to shut down the NFS server in the |
| associated initscript, instead use ``rpc.nfsd 0``. |
| |
| - ``readline``: enable HOME, END, INSERT, and DELETE key bindings in |
| ``inputrc``. |
| |
| - Switch to a new :ref:`sstate-cache <overview-manual/concepts:shared state |
| cache>` CDN (http://sstate.yoctoproject.org). |
| |
| - :ref:`ref-classes-sstate`: Apply a proper :manpage:`umask` when fetching |
| from :term:`SSTATE_MIRRORS`. |
| |
| - ``kernel-devsrc``: make package version consistent with kernel source (by |
| inheriting :ref:`ref-classes-kernelsrc`). |
| |
| - :ref:`ref-classes-externalsrc`: Always ask Git for location of ``.git`` |
| directory (may be different from the default ``${S}/.git``). |
| |
| - :ref:`ref-classes-features_check`: Add support for :term:`REQUIRED_TUNE_FEATURES`. |
| |
| - ``openssh``: limit read access to ``sshd_config`` file (set its filemode |
| to ``0600``). |
| |
| - ``barebox-tools`` now installs the ``rk-usb-loader`` utility. |
| |
| - The :ref:`ref-classes-setuptools3_legacy` class now supports the |
| :ref:`qa-check-pep517-backend` QA check. |
| |
| - The :ref:`ref-classes-ccache` class now supports using `Ccache` for native |
| recipes when the local build configuration contains:: |
| |
| ASSUME_PROVIDED += "ccache-native" |
| HOSTTOOLS += "ccache" |
| |
| - :ref:`ref-classes-python_pep517`: use ``pyproject-build`` instead of |
| calling the module with ``nativepython3``. |
| |
| - ``dbus-glib``: include the binding tools separately into the |
| ``${PN}-tools`` package. |
| |
| - ``dbus``: use the :ref:`ref-classes-systemd` class to handle the unit |
| files of D-Bus. |
| |
| - ``dpkg``: add :ref:`ptest <test-manual/ptest:testing packages with ptest>` |
| support. |
| |
| - ``shared-mime-info``: Now uses the :term:`USE_NLS` variable to enable |
| building translations. |
| |
| - ``p11-kit``: Now uses the :term:`USE_NLS` variable to enable building |
| translations. |
| |
| - ``babeltrace2``: Enable Python plugins |
| |
| - ``initramfs-framework``: mount a temporary filesystem on ``/run`` and move |
| it to the root filesystem directory before calling ``switch_root``. |
| |
| - ``python3``: Pass ``PLATFORM_TRIPLET`` explicitly when cross compiling to |
| make the build deterministic instead of letting Python detect the platform |
| triplet (``${HOST_ARCH}-${HOST_OS}``). |
| |
| - ``pulseaudio``: Add the ``audio`` group explicitly if |
| ``pulseaudio-server`` is used. |
| |
| - ``oe/license_finder``: Add ``find_licenses_up`` function to find licenses |
| upwards until reaching a predefined top directory (as an argument). |
| |
| - ``mesa``: |
| |
| - Build Mesa's Asahi tools when ``asahi`` is part of the recipe's |
| :term:`PACKAGECONFIG` variable. |
| |
| - The ``mesa`` recipe now declares two new :term:`PROVIDES` for Vulkan |
| and OpenCL ICD. These virtual provider are respectively named |
| ``virtual-opencl-icd`` and ``virtual-vulkan-icd``. |
| |
| - ``mesa-demos``: split info tools to a separate package ``mesa-demos-info``. |
| |
| - ``vte``: skip :ref:`ref-classes-gobject-introspection` with Clang on Arm, |
| as it caused build failures. |
| |
| - ``shadow``: Increase the maximum group name length from 24 to 32 (default |
| value provided by upstream recipe, was previously hardcoded to 24). |
| |
| - ``udev-extraconf``: Speed up the ``mount.sh`` script by passing the block |
| device of interest to ``blkid`` when getting partition label names. |
| |
| - ``piglit``: enable OpenCL support if ``opencl`` is part of the |
| :term:`DISTRO` features. |
| |
| Known Issues in |yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| N/A |
| |
| Recipe License changes in |yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| .. |
| Going through commits on OE-Core filtered by License-Update: |
| git log -U0 --patch --grep "License-Update:" yocto-5.2..origin/master |
| |
| The following changes have been made to the :term:`LICENSE` values set by recipes: |
| |
| .. list-table:: |
| :widths: 20 40 40 |
| :header-rows: 1 |
| |
| * - Recipe |
| - Previous value |
| - New value |
| * - ``flac`` |
| - ``GFDL-1.2 & GPL-2.0-or-later & LGPL-2.1-or-later & BSD-3-Clause`` |
| - ``GFDL-1.3 & GPL-2.0-or-later & LGPL-2.1-or-later & BSD-3-Clause`` |
| * - ``rust`` |
| - ``(MIT | Apache-2.0) & Unicode-TOU`` |
| - ``(MIT | Apache-2.0) & Unicode-3.0`` |
| * - ``vulkan-validation-layers`` |
| - ``Apache-2.0 & MIT`` |
| - ``Apache-2.0 & MIT & BSL-1.0`` |
| * - ``util-linux`` |
| - ``GPL-1.0-or-later & GPL-2.0-only & GPL-2.0-or-later & LGPL-2.1-or-later & BSD-2-Clause & B SD-3-Clause & BSD-4-Clause-UC & MIT`` |
| - ``GPL-1.0-or-later & GPL-2.0-only & GPL-2.0-or-later & LGPL-2.1-or-later & BSD-2-Clause & B SD-3-Clause & BSD-4-Clause-UC & MIT & EUPL-1.2`` |
| * - ``python3-docutils`` |
| - ``CC0-1.0 & ZPL-2.1 & BSD-2-Clause & GPL-3.0-only`` |
| - ``CC0-1.0 & BSD-2-Clause & GPL-3.0-only`` |
| * - ``tiff`` |
| - ``libtiff`` |
| - ``libtiff & BSD-4.3TAHOE`` |
| * - ``gawk`` |
| - ``GPL-3.0-only`` |
| - ``GPL-3.0-or-later & AGPL-3.0-or-later`` |
| * - ``go-helloworld`` |
| - ``MIT`` |
| - ``BSD-3-Clause`` |
| |
| Security Fixes in |yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| .. |
| Generated with documentation/tools/gen-cve-release-notes |
| |
| The following CVEs have been fixed: |
| |
| .. list-table:: |
| :widths: 30 70 |
| :header-rows: 1 |
| |
| * - Recipe |
| - CVE IDs |
| * - ``busybox`` |
| - :cve_nist:`2025-46394` |
| * - ``ghostscript`` |
| - :cve_nist:`2025-59798`, :cve_nist:`2025-59799`, :cve_nist:`2025-59800` |
| * - ``libmicrohttpd`` |
| - :cve_nist:`2025-59777`, :cve_nist:`2025-62689` |
| * - ``libpng`` |
| - :cve_nist:`2025-64505`, :cve_nist:`2025-64506`, :cve_nist:`2025-64720`, :cve_nist:`2025-65018` |
| * - ``libsndfile1`` |
| - :cve_nist:`2024-50613`, :cve_nist:`2025-52194` |
| * - ``linux-yocto`` |
| - :cve_nist:`2019-14899`, :cve_nist:`2021-3714`, :cve_nist:`2021-3864`, :cve_nist:`2022-0400`, :cve_nist:`2022-1247`, :cve_nist:`2022-4543`, :cve_nist:`2022-38096`, :cve_nist:`2023-3397`, :cve_nist:`2023-3640`, :cve_nist:`2023-4010`, :cve_nist:`2023-6238`, :cve_nist:`2023-6240`, :cve_nist:`2023-6535`, :cve_nist:`2023-39176`, :cve_nist:`2023-39179`, :cve_nist:`2023-39180`, :cve_nist:`2024-52560`, :cve_nist:`2024-57995`, :cve_nist:`2024-58015`, :cve_nist:`2024-58074`, :cve_nist:`2024-58093`, :cve_nist:`2024-58094`, :cve_nist:`2024-58095`, :cve_nist:`2024-58096`, :cve_nist:`2024-58097`, :cve_nist:`2025-4598`, :cve_nist:`2025-21709`, :cve_nist:`2025-21751`, :cve_nist:`2025-21752`, :cve_nist:`2025-21807`, :cve_nist:`2025-21833`, :cve_nist:`2025-21949`, :cve_nist:`2025-22104`, :cve_nist:`2025-22105`, :cve_nist:`2025-22106`, :cve_nist:`2025-22107`, :cve_nist:`2025-22108`, :cve_nist:`2025-22109`, :cve_nist:`2025-22111`, :cve_nist:`2025-22116`, :cve_nist:`2025-22117`, :cve_nist:`2025-22121`, :cve_nist:`2025-22127`, :cve_nist:`2025-23129`, :cve_nist:`2025-23130`, :cve_nist:`2025-23131`, :cve_nist:`2025-23132`, :cve_nist:`2025-23135`, :cve_nist:`2025-37743`, :cve_nist:`2025-37746`, :cve_nist:`2025-37803`, :cve_nist:`2025-37860`, :cve_nist:`2025-37880`, :cve_nist:`2025-37906`, :cve_nist:`2025-38029`, :cve_nist:`2025-38036`, :cve_nist:`2025-38041`, :cve_nist:`2025-38042`, :cve_nist:`2025-38064`, :cve_nist:`2025-38105`, :cve_nist:`2025-38132`, :cve_nist:`2025-38137`, :cve_nist:`2025-38140`, :cve_nist:`2025-38187`, :cve_nist:`2025-38199`, :cve_nist:`2025-38205`, :cve_nist:`2025-38207`, :cve_nist:`2025-38234`, :cve_nist:`2025-38248`, :cve_nist:`2025-38261`, :cve_nist:`2025-38284`, :cve_nist:`2025-38311`, :cve_nist:`2025-38359`, :cve_nist:`2025-38426`, :cve_nist:`2025-38584`, :cve_nist:`2025-38591`, :cve_nist:`2025-38597`, :cve_nist:`2025-38605`, :cve_nist:`2025-38621`, :cve_nist:`2025-38627`, :cve_nist:`2025-38636`, :cve_nist:`2025-38656`, :cve_nist:`2025-38678`, :cve_nist:`2025-39677`, :cve_nist:`2025-39678`, :cve_nist:`2025-39745`, :cve_nist:`2025-39762`, :cve_nist:`2025-39764`, :cve_nist:`2025-39789`, :cve_nist:`2025-40325` |
| * - ``qemu`` |
| - :cve_nist:`2024-6519`, :cve_nist:`2024-8354` |
| * - ``webkitgtk`` |
| - :cve_nist:`2025-43342`, :cve_nist:`2025-43343` |
| |
| Recipe Upgrades in |yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| .. |
| Generated with https://layers.openembedded.org/layerindex/branch_comparison |
| With "rST" output selected |
| |
| The following recipes have been upgraded: |
| |
| .. list-table:: |
| :widths: 20 40 40 |
| :header-rows: 1 |
| |
| * - Recipe |
| - Previous version(s) |
| - New version(s) |
| * - ``acpica`` |
| - 20240827 |
| - 20250807 |
| * - ``alsa-lib`` |
| - 1.2.13 |
| - 1.2.14 |
| * - ``alsa-tools`` |
| - 1.2.11 |
| - 1.2.14 |
| * - ``alsa-ucm-conf`` |
| - 1.2.13 |
| - 1.2.14 |
| * - ``alsa-utils`` |
| - 1.2.13 |
| - 1.2.14 |
| * - ``appstream`` |
| - 1.0.4 |
| - 1.0.6 |
| * - ``apr`` |
| - 1.7.5 |
| - 1.7.6 |
| * - ``apt`` |
| - 2.6.1 |
| - 3.0.3 |
| * - ``at-spi2-core`` |
| - 2.56.0 |
| - 2.56.4 |
| * - ``autoconf`` |
| - 2.72e |
| - 2.72 |
| * - ``automake`` |
| - 1.17 |
| - 1.18.1 |
| * - ``babeltrace2`` |
| - 2.1.0 |
| - 2.1.2 |
| * - ``barebox`` |
| - 2025.02.0 |
| - 2025.11.0 |
| * - ``barebox-tools`` |
| - 2025.02.0 |
| - 2025.11.0 |
| * - ``base-passwd`` |
| - 3.6.6 |
| - 3.6.7 |
| * - ``bash`` |
| - 5.2.37 |
| - 5.3 |
| * - ``bc`` |
| - 1.08.1 |
| - 1.08.2 |
| * - ``bind`` |
| - 9.20.11 |
| - 9.20.15 |
| * - ``binutils`` |
| - 2.44 |
| - 2.45 |
| * - ``binutils-cross`` |
| - 2.44 |
| - 2.45 |
| * - ``binutils-cross-canadian`` |
| - 2.44 |
| - 2.45 |
| * - ``binutils-crosssdk`` |
| - 2.44 |
| - 2.45 |
| * - ``binutils-testsuite`` |
| - 2.44 |
| - 2.45 |
| * - ``blktrace`` |
| - 1.3.0+git |
| - 1.3.0 |
| * - ``bluez5`` |
| - 5.79 |
| - 5.85 |
| * - ``bmaptool`` |
| - 3.8.0+git |
| - 3.9.0+git |
| * - ``boost`` |
| - 1.87.0 |
| - 1.89.0 |
| * - ``boost-build-native`` |
| - 1.87.0 |
| - 1.89.0 |
| * - ``btrfs-tools`` |
| - 6.13 |
| - 6.17 |
| * - ``build-appliance-image`` |
| - 15.0.0 (316baad50b45…) |
| - 15.0.0 |
| * - ``ca-certificates`` |
| - 20241223 |
| - 20250419 |
| * - ``cargo`` |
| - 1.84.1 |
| - 1.90.0 |
| * - ``cargo-c`` |
| - 0.10.5+cargo-0.83.0 |
| - 0.10.16+cargo-0.91.0 |
| * - ``ccache`` |
| - 4.11 |
| - 4.12.1 |
| * - ``cmake`` |
| - 3.31.6 |
| - 4.2.0 |
| * - ``cmake-native`` |
| - 3.31.6 |
| - 4.2.0 |
| * - ``connman`` |
| - 1.43 |
| - 1.45 |
| * - ``coreutils`` |
| - 9.6 |
| - 9.7 |
| * - ``createrepo-c`` |
| - 1.2.0 |
| - 1.2.1 |
| * - ``cross-localedef-native`` |
| - 2.41+git |
| - 2.42+git |
| * - ``cups`` |
| - 2.4.11 |
| - 2.4.14 |
| * - ``curl`` |
| - 8.12.1 |
| - 8.17.0 |
| * - ``debianutils`` |
| - 5.21 |
| - 5.23.2 |
| * - ``debugedit`` |
| - 5.1 |
| - 5.2 |
| * - ``dhcpcd`` |
| - 10.2.2 |
| - 10.2.4 |
| * - ``diffoscope`` |
| - 289 |
| - 306 |
| * - ``diffstat`` |
| - 1.67 |
| - 1.68 |
| * - ``diffutils`` |
| - 3.11 |
| - 3.12 |
| * - ``dnf`` |
| - 4.22.0 |
| - 4.24.0 |
| * - ``dos2unix`` |
| - 7.5.2 |
| - 7.5.3 |
| * - ``dpkg`` |
| - 1.22.11 |
| - 1.22.21 |
| * - ``dropbear`` |
| - 2024.86 |
| - 2025.88 |
| * - ``e2fsprogs`` |
| - 1.47.1 |
| - 1.47.3 |
| * - ``ed`` |
| - 1.21 |
| - 1.22.2 |
| * - ``elfutils`` |
| - 0.192 |
| - 0.194 |
| * - ``ell`` |
| - 0.74 |
| - 0.80 |
| * - ``enchant2`` |
| - 2.8.2 |
| - 2.8.12 |
| * - ``epiphany`` |
| - 48.3 |
| - 48.5 |
| * - ``erofs-utils`` |
| - 1.8.5 |
| - 1.8.10 |
| * - ``ethtool`` |
| - 6.11 |
| - 6.15 |
| * - ``expat`` |
| - 2.7.2 |
| - 2.7.3 |
| * - ``fastfloat`` |
| - 8.0.2 |
| - 8.1.0 |
| * - ``ffmpeg`` |
| - 7.1.2 |
| - 8.0 |
| * - ``flac`` |
| - 1.4.3 |
| - 1.5.0 |
| * - ``fmt`` |
| - 11.1.4 |
| - 12.1.0 |
| * - ``fontconfig`` |
| - 2.15.0 |
| - 2.17.1 |
| * - ``gawk`` |
| - 5.3.1 |
| - 5.3.2 |
| * - ``gcc`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcc-cross`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcc-cross-canadian`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcc-crosssdk`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcc-runtime`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcc-sanitizers`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcc-source`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``gcr`` |
| - 4.3.1 |
| - 4.4.0.1 |
| * - ``gdb`` |
| - 16.2 |
| - 16.3 |
| * - ``gdb-cross`` |
| - 16.2 |
| - 16.3 |
| * - ``gdb-cross-canadian`` |
| - 16.2 |
| - 16.3 |
| * - ``gdbm`` |
| - 1.24 |
| - 1.26 |
| * - ``gettext`` |
| - 0.23.1 |
| - 0.26 |
| * - ``gettext-minimal-native`` |
| - 0.23.1 |
| - 0.26 |
| * - ``ghostscript`` |
| - 10.05.1 |
| - 10.06.0 |
| * - ``gi-docgen`` |
| - 2025.3 |
| - 2025.5 |
| * - ``git`` |
| - 2.49.1 |
| - 2.51.2 |
| * - ``glib-2.0`` |
| - 2.84.4 |
| - 2.86.1 |
| * - ``glib-2.0-initial`` |
| - 2.84.4 |
| - 2.86.1 |
| * - ``glib-networking`` |
| - 2.80.0 |
| - 2.80.1 |
| * - ``glibc`` |
| - 2.41+git |
| - 2.42+git |
| * - ``glibc-locale`` |
| - 2.41+git |
| - 2.42+git |
| * - ``glibc-mtrace`` |
| - 2.41+git |
| - 2.42+git |
| * - ``glibc-scripts`` |
| - 2.41+git |
| - 2.42+git |
| * - ``glibc-testsuite`` |
| - 2.41+git |
| - 2.42+git |
| * - ``glslang`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``gnu-config`` |
| - 20240823+git |
| - 20250709+git |
| * - ``gnu-efi`` |
| - 4.0.0 |
| - 4.0.2 |
| * - ``gnupg`` |
| - 2.5.5 |
| - 2.5.11 |
| * - ``go`` |
| - 1.24.6 |
| - 1.25.4 |
| * - ``go-binary-native`` |
| - 1.24.6 |
| - 1.25.4 |
| * - ``go-cross-canadian`` |
| - 1.24.6 |
| - 1.25.4 |
| * - ``go-cross-core2-32`` |
| - 1.24.6 |
| - 1.25.4 |
| * - ``go-crosssdk`` |
| - 1.24.6 |
| - 1.25.4 |
| * - ``go-helloworld`` |
| - 0.1 (d7b0ac127859…) |
| - 0.1 (8b405629c4a5…) |
| * - ``go-runtime`` |
| - 1.24.6 |
| - 1.25.4 |
| * - ``gperf`` |
| - 3.1 |
| - 3.3 |
| * - ``gpgme`` |
| - 1.24.2 |
| - 2.0.1 |
| * - ``grep`` |
| - 3.11 |
| - 3.12 |
| * - ``gsettings-desktop-schemas`` |
| - 48.0 |
| - 49.1 |
| * - ``gst-devtools`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gst-examples`` |
| - 1.18.6 |
| - 1.26.7 |
| * - ``gstreamer1.0`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-libav`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-plugins-bad`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-plugins-base`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-plugins-good`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-plugins-ugly`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-python`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-rtsp-server`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gstreamer1.0-vaapi`` |
| - 1.24.13 |
| - 1.26.7 |
| * - ``gtk+3`` |
| - 3.24.43 |
| - 3.24.51 |
| * - ``gtk4`` |
| - 4.18.1 |
| - 4.18.6 |
| * - ``gzip`` |
| - 1.13 |
| - 1.14 |
| * - ``harfbuzz`` |
| - 10.4.0 |
| - 11.5.1 |
| * - ``hwdata`` |
| - 0.393 |
| - 0.399 |
| * - ``hwlatdetect`` |
| - 2.8 |
| - 2.9 |
| * - ``icu`` |
| - 76-1 |
| - 77-1 |
| * - ``igt-gpu-tools`` |
| - 1.30 |
| - 2.1 |
| * - ``init-system-helpers`` |
| - 1.68 |
| - 1.69 |
| * - ``iproute2`` |
| - 6.13.0 |
| - 6.17.0 |
| * - ``iputils`` |
| - 20240905 |
| - 20250605 |
| * - ``iso-codes`` |
| - 4.17.0 |
| - 4.18.0 |
| * - ``iw`` |
| - 6.9 |
| - 6.17 |
| * - ``json-glib`` |
| - 1.10.6 |
| - 1.10.8 |
| * - ``kbd`` |
| - 2.7.1 |
| - 2.8.0 |
| * - ``kea`` |
| - 2.6.3 |
| - 3.0.1 |
| * - ``kern-tools-native`` |
| - 0.3+git (c8c1f17867d0…) |
| - 0.3+git (f589e1df2325…) |
| * - ``kexec-tools`` |
| - 2.0.30 |
| - 2.0.31 |
| * - ``kmod`` |
| - 34.1 |
| - 34.2 |
| * - ``kmscube`` |
| - 0.0.1+git (311eaaaa473d…) |
| - 0.0.1+git (f60e50e887d3…) |
| * - ``less`` |
| - 668 |
| - 685 |
| * - ``libadwaita`` |
| - 1.7.0 |
| - 1.7.6 |
| * - ``libarchive`` |
| - 3.7.9 |
| - 3.8.3 |
| * - ``libatomic-ops`` |
| - 7.8.2 |
| - 7.8.4 |
| * - ``libc-test`` |
| - 0+git (18e28496adee…) |
| - 0+git (f2bac7711bec…) |
| * - ``libcap`` |
| - 2.75 |
| - 2.77 |
| * - ``libcgroup`` |
| - 3.1.0 |
| - 3.2.0 |
| * - ``libcomps`` |
| - 0.1.21 |
| - 0.1.23 |
| * - ``libdnf`` |
| - 0.73.4 |
| - 0.75.0 |
| * - ``libdrm`` |
| - 2.4.124 |
| - 2.4.128 |
| * - ``libedit`` |
| - 20250104-3.1 |
| - 20251016-3.1 |
| * - ``libevdev`` |
| - 1.13.3 |
| - 1.13.5 |
| * - ``libffi`` |
| - 3.4.7 |
| - 3.5.2 |
| * - ``libgcc`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``libgcc-initial`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``libgcrypt`` |
| - 1.11.0 |
| - 1.11.2 |
| * - ``libgfortran`` |
| - 14.3.0 |
| - 15.2.0 |
| * - ``libgit2`` |
| - 1.9.0 |
| - 1.9.1 |
| * - ``libgloss`` |
| - 4.4.0+git |
| - 4.5.0+git |
| * - ``libgpg-error`` |
| - 1.51 |
| - 1.56 |
| * - ``libinput`` |
| - 1.27.1 |
| - 1.29.1 |
| * - ``libjitterentropy`` |
| - 3.6.2 |
| - 3.6.3 |
| * - ``libjpeg-turbo`` |
| - 3.0.1 |
| - 3.1.2 |
| * - ``libmicrohttpd`` |
| - 1.0.1 |
| - 1.0.2 |
| * - ``libmodulemd`` |
| - 2.15.0 |
| - 2.15.2 |
| * - ``libnotify`` |
| - 0.8.4 |
| - 0.8.6 |
| * - ``libnss-nis`` |
| - 3.2 |
| - 3.4 |
| * - ``libogg`` |
| - 1.3.5 |
| - 1.3.6 |
| * - ``libpng`` |
| - 1.6.47 |
| - 1.6.50 |
| * - ``libproxy`` |
| - 0.5.9 |
| - 0.5.10 |
| * - ``librepo`` |
| - 1.19.0 |
| - 1.20.0 |
| * - ``librsvg`` |
| - 2.59.2 |
| - 2.61.0 |
| * - ``libsdl2`` |
| - 2.32.2 |
| - 2.32.10 |
| * - ``libsecret`` |
| - 0.21.6 |
| - 0.21.7 |
| * - ``libslirp`` |
| - 4.9.0 |
| - 4.9.1 |
| * - ``libsolv`` |
| - 0.7.31 |
| - 0.7.35 |
| * - ``libstd-rs`` |
| - 1.84.1 |
| - 1.90.0 |
| * - ``libtheora`` |
| - 1.1.1 |
| - 1.2.0 |
| * - ``libucontext`` |
| - 1.2 |
| - 1.3.2 |
| * - ``libunistring`` |
| - 1.3 |
| - 1.4.1 |
| * - ``libunwind`` |
| - 1.6.2 |
| - 1.8.3 |
| * - ``liburcu`` |
| - 0.15.1 |
| - 0.15.3 |
| * - ``libusb1`` |
| - 1.0.27 |
| - 1.0.29 |
| * - ``libuv`` |
| - 1.50.0 |
| - 1.51.0 |
| * - ``libwebp`` |
| - 1.5.0 |
| - 1.6.0 |
| * - ``libwpe`` |
| - 1.16.2 |
| - 1.16.3 |
| * - ``libxfixes`` |
| - 6.0.1 |
| - 6.0.2 |
| * - ``libxft`` |
| - 2.3.8 |
| - 2.3.9 |
| * - ``libxkbcommon`` |
| - 1.8.1 |
| - 1.11.0 |
| * - ``libxml2`` |
| - 2.13.8 |
| - 2.14.6 |
| * - ``libxmlb`` |
| - 0.3.22 |
| - 0.3.23 |
| * - ``libxres`` |
| - 1.2.2 |
| - 1.2.3 |
| * - ``libxscrnsaver`` |
| - 1.2.4 |
| - 1.2.5 |
| * - ``lighttpd`` |
| - 1.4.77 |
| - 1.4.81 |
| * - ``linux-firmware`` |
| - 20250311 |
| - 20251111 |
| * - ``linux-libc-headers`` |
| - 6.12 |
| - 6.17 |
| * - ``linux-yocto`` |
| - 6.12.47+git |
| - 6.12.55+git, 6.16.11+git, 6.17.6+git |
| * - ``linux-yocto-dev`` |
| - 6.14+git |
| - 6.18+git |
| * - ``linux-yocto-rt`` |
| - 6.12.47+git |
| - 6.12.55+git, 6.16.11+git, 6.17.6+git |
| * - ``linux-yocto-tiny`` |
| - 6.12.47+git |
| - 6.12.55+git, 6.16.11+git, 6.17.6+git |
| * - ``llvm`` |
| - 20.1.0 |
| - 21.1.6 |
| * - ``lsof`` |
| - 4.99.4 |
| - 4.99.5 |
| * - ``ltp`` |
| - 20250130 |
| - 20250930 |
| * - ``lttng-modules`` |
| - 2.13.17 |
| - 2.14.3 |
| * - ``lttng-tools`` |
| - 2.13.14 |
| - 2.14.0 |
| * - ``lttng-ust`` |
| - 2.13.8 |
| - 2.14.0 |
| * - ``lua`` |
| - 5.4.7 |
| - 5.4.8 |
| * - ``m4`` |
| - 1.4.19 |
| - 1.4.20 |
| * - ``m4-native`` |
| - 1.4.19 |
| - 1.4.20 |
| * - ``man-db`` |
| - 2.13.0 |
| - 2.13.1 |
| * - ``man-pages`` |
| - 6.13 |
| - 6.15 |
| * - ``mdadm`` |
| - 4.3 |
| - 4.4 |
| * - ``mesa`` |
| - 24.0.7 |
| - 25.2.5 |
| * - ``mesa-gl`` |
| - 24.0.7 |
| - 25.2.5 |
| * - ``meson`` |
| - 1.7.0 |
| - 1.9.1 |
| * - ``mmc-utils`` |
| - 0.1+git |
| - 1.0 |
| * - ``mobile-broadband-provider-info`` |
| - 20240407 |
| - 20250613 |
| * - ``mpfr`` |
| - 4.2.1 |
| - 4.2.2 |
| * - ``mpg123`` |
| - 1.32.10 |
| - 1.33.2 |
| * - ``msmtp`` |
| - 1.8.28 |
| - 1.8.31 |
| * - ``musl`` |
| - 1.2.5+git (c47ad25ea3b4…) |
| - 1.2.5+git (0ccaf0572e9c…) |
| * - ``nettle`` |
| - 3.10.1 |
| - 3.10.2 |
| * - ``newlib`` |
| - 4.4.0+git |
| - 4.5.0+git |
| * - ``nfs-utils`` |
| - 2.8.2 |
| - 2.8.4 |
| * - ``nghttp2`` |
| - 1.65.0 |
| - 1.68.0 |
| * - ``ninja`` |
| - 1.12.1 |
| - 1.13.1 |
| * - ``ofono`` |
| - 2.15 |
| - 2.18 |
| * - ``opensbi`` |
| - 1.6 |
| - 1.7 |
| * - ``openssh`` |
| - 9.9p2 |
| - 10.2p1 |
| * - ``openssl`` |
| - 3.4.2 |
| - 3.5.4 |
| * - ``opkg`` |
| - 0.7.0 |
| - 0.9.0 |
| * - ``ovmf`` |
| - edk2-stable202411 |
| - edk2-stable202508 |
| * - ``pango`` |
| - 1.56.2 |
| - 1.57.0 |
| * - ``patch`` |
| - 2.7.6 |
| - 2.8 |
| * - ``patchelf`` |
| - 0.18.0 |
| - 0.18.0+git |
| * - ``pciutils`` |
| - 3.13.0 |
| - 3.14.0 |
| * - ``piglit`` |
| - 1.0+gitr (fc8179d31904…) |
| - 1.0+gitr (a0a27e528f64…) |
| * - ``pinentry`` |
| - 1.3.1 |
| - 1.3.2 |
| * - ``pixman`` |
| - 0.44.2 |
| - 0.46.4 |
| * - ``pkgconf`` |
| - 2.4.3 |
| - 2.5.1 |
| * - ``pseudo`` |
| - 1.9.0+git |
| - 1.9.2+git |
| * - ``psplash`` |
| - 0.1+git (1f64c654129f…) |
| - 0.1+git (53ae74a36bf1…) |
| * - ``puzzles`` |
| - 0.0+git (7da464122232…) |
| - 0.0+git (a7c7826bce5c…) |
| * - ``python3`` |
| - 3.13.4 |
| - 3.13.9 |
| * - ``python3-beartype`` |
| - 0.20.0 |
| - 0.21.0 |
| * - ``python3-booleanpy`` |
| - 4.0 |
| - 5.0 |
| * - ``python3-build`` |
| - 1.2.2 |
| - 1.3.0 |
| * - ``python3-calver`` |
| - 2022.6.26 |
| - 2025.04.17 |
| * - ``python3-certifi`` |
| - 2025.1.31 |
| - 2025.8.3 |
| * - ``python3-click`` |
| - 8.1.8 |
| - 8.2.2 |
| * - ``python3-cryptography`` |
| - 44.0.2 |
| - 45.0.7 |
| * - ``python3-cryptography-vectors`` |
| - 44.0.2 |
| - 45.0.7 |
| * - ``python3-cython`` |
| - 3.0.12 |
| - 3.1.3 |
| * - ``python3-dbusmock`` |
| - 0.33.0 |
| - 0.37.0 |
| * - ``python3-docutils`` |
| - 0.21.2 |
| - 0.22 |
| * - ``python3-dtschema`` |
| - 2025.2 |
| - 2025.8 |
| * - ``python3-flit-core`` |
| - 3.11.0 |
| - 3.12.0 |
| * - ``python3-hatch-fancy-pypi-readme`` |
| - 24.1.0 |
| - 25.1.0 |
| * - ``python3-hatch-vcs`` |
| - 0.4.0 |
| - 0.5.0 |
| * - ``python3-hypothesis`` |
| - 6.129.2 |
| - 6.142.2 |
| * - ``python3-idna`` |
| - 3.10 |
| - 3.11 |
| * - ``python3-iniconfig`` |
| - 2.0.0 |
| - 2.1.0 |
| * - ``python3-jsonschema`` |
| - 4.23.0 |
| - 4.25.1 |
| * - ``python3-jsonschema-specifications`` |
| - 2024.10.1 |
| - 2025.9.1 |
| * - ``python3-license-expression`` |
| - 30.4.1 |
| - 30.4.4 |
| * - ``python3-lxml`` |
| - 5.3.1 |
| - 6.0.2 |
| * - ``python3-mako`` |
| - 1.3.9 |
| - 1.3.10 |
| * - ``python3-markdown`` |
| - 3.7 |
| - 3.9 |
| * - ``python3-maturin`` |
| - 1.8.3 |
| - 1.9.4 |
| * - ``python3-meson-python`` |
| - 0.17.1 |
| - 0.18.0 |
| * - ``python3-numpy`` |
| - 2.2.3 |
| - 2.3.4 |
| * - ``python3-packaging`` |
| - 24.2 |
| - 25.0 |
| * - ``python3-pbr`` |
| - 6.1.0 |
| - 7.0.1 |
| * - ``python3-pip`` |
| - 25.0.1 |
| - 25.2 |
| * - ``python3-pluggy`` |
| - 1.5.0 |
| - 1.6.0 |
| * - ``python3-poetry-core`` |
| - 2.1.1 |
| - 2.1.3 |
| * - ``python3-pycairo`` |
| - 1.27.0 |
| - 1.28.0 |
| * - ``python3-pycryptodome`` |
| - 3.22.0 |
| - 3.23.0 |
| * - ``python3-pycryptodomex`` |
| - 3.22.0 |
| - 3.23.0 |
| * - ``python3-pygments`` |
| - 2.19.1 |
| - 2.19.2 |
| * - ``python3-pygobject`` |
| - 3.52.2 |
| - 3.54.5 |
| * - ``python3-pyopenssl`` |
| - 25.0.0 |
| - 25.1.0 |
| * - ``python3-pyparsing`` |
| - 3.2.1 |
| - 3.2.4 |
| * - ``python3-pytest`` |
| - 8.3.5 |
| - 8.4.2 |
| * - ``python3-pytest-subtests`` |
| - 0.14.1 |
| - 0.14.2 |
| * - ``python3-pytz`` |
| - 2025.1 |
| - 2025.2 |
| * - ``python3-rdflib`` |
| - 7.1.3 |
| - 7.1.4 |
| * - ``python3-referencing`` |
| - 0.36.2 |
| - 0.37.0 |
| * - ``python3-requests`` |
| - 2.32.4 |
| - 2.32.5 |
| * - ``python3-rpds-py`` |
| - 0.22.3 |
| - 0.27.1 |
| * - ``python3-ruamel-yaml`` |
| - 0.18.10 |
| - 0.18.15 |
| * - ``python3-scons`` |
| - 4.9.0 |
| - 4.9.1 |
| * - ``python3-setuptools`` |
| - 76.0.0 |
| - 80.9.0 |
| * - ``python3-setuptools-rust`` |
| - 1.11.0 |
| - 1.12.0 |
| * - ``python3-setuptools-scm`` |
| - 8.2.0 |
| - 8.3.1 |
| * - ``python3-smartypants`` |
| - 2.0.0 |
| - 2.0.2 |
| * - ``python3-snowballstemmer`` |
| - 2.2.0 |
| - 3.0.1 |
| * - ``python3-trove-classifiers`` |
| - 2025.3.13.13 |
| - 2025.9.11.17 |
| * - ``python3-typing-extensions`` |
| - 4.12.2 |
| - 4.15.0 |
| * - ``python3-unittest-automake-output`` |
| - 0.2 |
| - 0.3 |
| * - ``python3-uritools`` |
| - 4.0.3 |
| - 5.0.0 |
| * - ``python3-urllib3`` |
| - 2.3.0 |
| - 2.5.0 |
| * - ``python3-webcolors`` |
| - 24.8.0 |
| - 24.11.1 |
| * - ``python3-wheel`` |
| - 0.45.1 |
| - 0.46.1 |
| * - ``python3-xmltodict`` |
| - 0.14.2 |
| - 0.15.1 |
| * - ``python3-yamllint`` |
| - 1.36.0 |
| - 1.37.1 |
| * - ``python3-zipp`` |
| - 3.21.0 |
| - 3.23.0 |
| * - ``qemu`` |
| - 9.2.0 |
| - 10.0.6 |
| * - ``qemu-native`` |
| - 9.2.0 |
| - 10.0.6 |
| * - ``qemu-system-native`` |
| - 9.2.0 |
| - 10.0.6 |
| * - ``quilt`` |
| - 0.68 |
| - 0.69 |
| * - ``quilt-native`` |
| - 0.68 |
| - 0.69 |
| * - ``quota`` |
| - 4.09 |
| - 4.10 |
| * - ``re2c`` |
| - 4.1 |
| - 4.3 |
| * - ``readline`` |
| - 8.2.13 |
| - 8.3 |
| * - ``repo`` |
| - 2.52 |
| - 2.58 |
| * - ``resolvconf`` |
| - 1.92 |
| - 1.94 |
| * - ``rpcbind`` |
| - 1.2.7 |
| - 1.2.8 |
| * - ``rpm`` |
| - 4.20.0 |
| - 4.20.1 |
| * - ``rpm-sequoia`` |
| - 1.7.0 |
| - 1.9.0 |
| * - ``rpm-sequoia-crypto-policy`` |
| - git (032b418a6db8…) |
| - git (ae1df75b1155…) |
| * - ``rt-tests`` |
| - 2.8 |
| - 2.9 |
| * - ``ruby`` |
| - 3.4.4 |
| - 3.4.5 |
| * - ``rust`` |
| - 1.84.1 |
| - 1.90.0 |
| * - ``rust-cross-canadian`` |
| - 1.84.1 |
| - 1.90.0 |
| * - ``sbc`` |
| - 2.0 |
| - 2.1 |
| * - ``scdoc`` |
| - 1.11.3 |
| - 1.11.4 |
| * - ``screen`` |
| - 5.0.0 |
| - 5.0.1 |
| * - ``shaderc`` |
| - 2024.3 |
| - 2025.3 |
| * - ``shadow`` |
| - 4.17.3 |
| - 4.18.0 |
| * - ``spirv-headers`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``spirv-tools`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``squashfs-tools`` |
| - 4.6.1 |
| - 4.7.4 |
| * - ``strace`` |
| - 6.12 |
| - 6.17 |
| * - ``stress-ng`` |
| - 0.18.11 |
| - 0.19.04 |
| * - ``sudo`` |
| - 1.9.17p1 |
| - 1.9.17p2 |
| * - ``swig`` |
| - 4.3.0 |
| - 4.3.1 |
| * - ``sysklogd`` |
| - 2.7.1 |
| - 2.7.2 |
| * - ``sysstat`` |
| - 12.7.7 |
| - 12.7.8 |
| * - ``systemd`` |
| - 257.6 |
| - 257.8 |
| * - ``systemd-boot`` |
| - 257.6 |
| - 257.8 |
| * - ``systemd-boot-native`` |
| - 257.6 |
| - 257.8 |
| * - ``systemd-systemctl-native`` |
| - 257.6 |
| - 257.8 |
| * - ``systemtap`` |
| - 5.2 |
| - 5.3 |
| * - ``systemtap-native`` |
| - 5.2 |
| - 5.3 |
| * - ``taglib`` |
| - 2.0.2 |
| - 2.1.1 |
| * - ``tcf-agent`` |
| - 1.8.0+git |
| - 1.9.0 |
| * - ``tcl`` |
| - 9.0.1 |
| - 9.0.2 |
| * - ``tcl8`` |
| - 8.6.16 |
| - 8.6.17 |
| * - ``tiff`` |
| - 4.7.0 |
| - 4.7.1 |
| * - ``ttyrun`` |
| - 2.37.0 |
| - 2.38.0 |
| * - ``u-boot`` |
| - 2025.01 |
| - 2025.10 |
| * - ``u-boot-tools`` |
| - 2025.01 |
| - 2025.10 |
| * - ``unfs3`` |
| - 0.10.0 |
| - 0.11.0 |
| * - ``usbutils`` |
| - 018 |
| - 019 |
| * - ``util-linux`` |
| - 2.40.4 |
| - 2.41.1 |
| * - ``util-linux-libuuid`` |
| - 2.40.4 |
| - 2.41.1 |
| * - ``valgrind`` |
| - 3.24.0 |
| - 3.25.1 |
| * - ``vim`` |
| - 9.1.1652 |
| - 9.1.1683 |
| * - ``vim-tiny`` |
| - 9.1.1652 |
| - 9.1.1683 |
| * - ``virglrenderer`` |
| - 1.1.0 |
| - 1.1.1 |
| * - ``vte`` |
| - 0.78.2 |
| - 0.82.1 |
| * - ``vulkan-headers`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``vulkan-loader`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``vulkan-samples`` |
| - git (8547ce1022a1…) |
| - git (d27205d14d01…) |
| * - ``vulkan-tools`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``vulkan-utility-libraries`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``vulkan-validation-layers`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``vulkan-volk`` |
| - 1.4.309.0 |
| - 1.4.328.1 |
| * - ``wayland`` |
| - 1.23.1 |
| - 1.24.0 |
| * - ``wayland-protocols`` |
| - 1.41 |
| - 1.45 |
| * - ``webkitgtk`` |
| - 2.48.2 |
| - 2.50.0 |
| * - ``weston`` |
| - 14.0.1 |
| - 14.0.2 |
| * - ``which`` |
| - 2.21 |
| - 2.23 |
| * - ``wireless-regdb`` |
| - 2025.02.20 |
| - 2025.10.07 |
| * - ``xdpyinfo`` |
| - 1.3.4 |
| - 1.4.0 |
| * - ``xinput-calibrator`` |
| - 0.7.5+git |
| - 0.8.0 |
| * - ``xkeyboard-config`` |
| - 2.44 |
| - 2.45 |
| * - ``xwayland`` |
| - 24.1.6 |
| - 24.1.8 |
| * - ``xz`` |
| - 5.6.4 |
| - 5.8.1 |
| |
| Contributors to |yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| .. |
| List obtained with the following shell snippet: |
| |
| authors="" |
| for repo in openembedded-core yocto-docs bitbake meta-yocto; do |
| authors="${authors}\n$(git --no-pager -C $repo log --format="- %an" yocto-5.2..origin/master)" |
| done |
| echo $authors | sort | uniq |
| |
| Email addresses removed. |
| |
| Thanks to the following people who contributed to this release: |
| |
| - Adam Blank |
| - Adam Nilsson |
| - Adrian Freihofer |
| - Ahmad Fatoum |
| - Alejandro Hernandez Samaniego |
| - Aleksandar Nikolic |
| - Alexander Kanavin |
| - Alex Kiernan |
| - Alon Bar-Lev |
| - Alper Ak |
| - Andreas Stergiopoulos |
| - Andrej Valek |
| - Anibal Limon |
| - Ankur Tyagi |
| - Anna-Lena Marx |
| - Antonin Godard |
| - Anuj Mittal |
| - Archana Polampalli |
| - Barne Carstensen |
| - Benjamin Missey |
| - Benjamin Szőke |
| - Bo Sun |
| - Bruce Ashfield |
| - Carlos Sánchez de La Lama |
| - Changqing Li |
| - Chen Qi |
| - Chris Laplante |
| - Christian Lindeberg |
| - Christos Gavros |
| - Daisuke Yamane |
| - Daniel McGregor |
| - Daniel Turull |
| - Daniel Wagenknecht |
| - Dan McGregor |
| - Dario Binacchi |
| - David Reyna |
| - Deepak Rathore |
| - Deepesh Varatharajan |
| - denisova-ok |
| - Denys Dmytriyenko |
| - Diego de los Santos |
| - Diego Sueiro |
| - Divya Chellam |
| - Dixit Parmar |
| - Dmitry Baryshkov |
| - Enrico Jörns |
| - Enrico Scholz |
| - Erick Shepherd |
| - Erik Lindsten |
| - Etienne Cordonnier |
| - Fabio Estevam |
| - Falk Bauer |
| - Gregor Herburger |
| - Guðni Már Gilbert |
| - Gyorgy Sarvari |
| - Haixiao Yan |
| - Harish Sadineni |
| - Hiago De Franco |
| - hongxu |
| - Hongxu Jia |
| - Ines KCHELFI |
| - Isaac True |
| - Jaeyoon Jung |
| - Jamin Lin |
| - Jan Vermaete |
| - Jason M. Bills |
| - Jason Schonberg |
| - Jayasurya Maganuru |
| - Jeroen Hofstee |
| - Jiaying Song |
| - Jimmy Ho |
| - Jinfeng Wang |
| - João Henrique Ferreira de Freitas |
| - Joao Marcos Costa |
| - João Marcos Costa |
| - Johannes Schneider |
| - Jonathan Schnitzler |
| - Jon Mason |
| - Jörg Sommer |
| - Jose Quaresma |
| - Joshua Watt |
| - J. S. |
| - Julian Haller |
| - Kai Kang |
| - Kavinaya S |
| - Keerthivasan Raghavan |
| - Khang D Nguyen |
| - Khem Raj |
| - Koch, Stefan |
| - Koen Kooi |
| - Kyungjik Min |
| - Lamine REHAHLIA |
| - Lee Chee Yang |
| - leimaohui |
| - Lei Maohui |
| - Leon Anavi |
| - Leonard Anderweit |
| - Libo Chen |
| - Liu Yiding |
| - Li Wang |
| - Louis Rannou |
| - Luca Fancellu |
| - Madhu Marri |
| - Manuel Leonhardt |
| - Marco Cavallini |
| - Mark Asselstine |
| - Mark Hatle |
| - Markus Kurz |
| - Markus Volk |
| - Martin Jansa |
| - Martin Siegumfeldt |
| - Mathieu Dubois-Briand |
| - Michael Halstead |
| - Michael Jeanson |
| - Michael Opdenacker |
| - Michael Tretter |
| - Michal Sieron |
| - Mike Crowe |
| - Mike Looijmans |
| - Mikko Rapeli |
| - Ming Liu |
| - Mingli Yu |
| - Moritz Haase |
| - NeilBrown |
| - Nguyen Dat Tho |
| - Nikhil R |
| - Niko Mauno |
| - Ola x Nilsson |
| - Olga Denisova |
| - Osama Abdelkader |
| - Osose Itua |
| - Ovidiu Panait |
| - Patrick Vogelaar |
| - Patrick Williams |
| - Patryk Seregiet |
| - Paul Barker |
| - Paul Gortmaker |
| - Pedro Ferreira |
| - Per x Johansson |
| - Peter Kjellerstedt |
| - Peter Marko |
| - Peter Tatrai |
| - Petr Vorel |
| - Philip Lorenz |
| - Philippe-Alexandre Mathieu |
| - Pierre-Loup GOSSE |
| - Poonam Jadhav |
| - Praveen Kumar |
| - Priyal Doshi |
| - Quentin Schulz |
| - rajmohan r |
| - Randolph Sapp |
| - Randy MacLeod |
| - Raphael Schlarb |
| - Rasmus Villemoes |
| - Ricardo Salveti |
| - Ricardo Simoes |
| - Richard Grünert |
| - Richard Purdie |
| - Robbin Van Damme |
| - Robert P. J. Day |
| - Robert Tiemann |
| - Robert Yang |
| - Rogerio Guerra Borin |
| - Ross Burton |
| - Ryan Eatmon |
| - Samuli Piippo |
| - Sandeep Gundlupet Raju |
| - Saravanan |
| - Siddharth Doshi |
| - Simone Weiß |
| - Soumya Sambu |
| - Stefan Eichenberger |
| - Stefan Koch |
| - Steffen Greber |
| - Steve Sakoman |
| - Talel BELHAJ SALEM |
| - Thomas Perrot |
| - Thune Tran |
| - Tim Orling |
| - Tobias Pistora |
| - Tom Hochstein |
| - Trevor Gamblin |
| - Trevor Woerner |
| - Tudor Ambarus |
| - Uwe Kleine-König |
| - Veeresh Kadasani |
| - Victor Kamensky |
| - Vijay Anusuri |
| - Vincent Davis Jr |
| - Vishwas Udupa |
| - Vivek Puar |
| - Vyacheslav Yurkov |
| - Walter Werner SCHNEIDER |
| - Wang Mingyu |
| - Weisser, Pascal.ext |
| - Yannic Moog |
| - Yash Shinde |
| - Yi Zhao |
| - Yoann Congal |
| - Yogesh Tyagi |
| - Yogita Urade |
| - Zhang Peng |
| - Zoltan Boszormenyi |
| - Zoltán Böszörményi |
| |
| Repositories / Downloads for Yocto-|yocto-ver| |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| yocto-docs |
| |
| - Repository Location: :yocto_git:`/yocto-docs` |
| - Branch: :yocto_git:`whinlatter </yocto-docs/log/?h=whinlatter>` |
| - Tag: :yocto_git:`yocto-5.3 </yocto-docs/log/?h=yocto-5.3>` |
| - Git Revision: :yocto_git:`79cd33b06e87c04e4f873a5afd9d53714bc5047f </yocto-docs/commit/?id=79cd33b06e87c04e4f873a5afd9d53714bc5047f>` |
| - Release Artefact: yocto-docs-79cd33b06e87c04e4f873a5afd9d53714bc5047f |
| - sha: f2a353847243370d6924ea83542b055ee8098c51d4875b6a9b2cee79b98c0f29 |
| - Download Locations: |
| |
| https://downloads.yoctoproject.org/releases/yocto/yocto-5.3/yocto-docs-79cd33b06e87c04e4f873a5afd9d53714bc5047f.tar.bz2 |
| |
| https://mirrors.kernel.org/yocto/yocto/yocto-5.3/yocto-docs-79cd33b06e87c04e4f873a5afd9d53714bc5047f.tar.bz2 |
| |
| openembedded-core |
| |
| - Repository Location: :oe_git:`/openembedded-core` |
| - Branch: :oe_git:`whinlatter </openembedded-core/log/?h=whinlatter>` |
| - Tag: :oe_git:`yocto-5.3 </openembedded-core/log/?h=yocto-5.3>` |
| - Git Revision: :oe_git:`8519978592483bb096ed5192fff7af6c887b799e </openembedded-core/commit/?id=8519978592483bb096ed5192fff7af6c887b799e>` |
| - Release Artefact: oecore-8519978592483bb096ed5192fff7af6c887b799e |
| - sha: 3b23d8a56a2f6e3872ec01272a76e3551ac1eab001f81c9abc680ce415aa888d |
| - Download Locations: |
| |
| https://downloads.yoctoproject.org/releases/yocto/yocto-5.3/oecore-8519978592483bb096ed5192fff7af6c887b799e.tar.bz2 |
| |
| https://mirrors.kernel.org/yocto/yocto/yocto-5.3/oecore-8519978592483bb096ed5192fff7af6c887b799e.tar.bz2 |
| |
| meta-yocto |
| |
| - Repository Location: :yocto_git:`/meta-yocto` |
| - Branch: :yocto_git:`whinlatter </meta-yocto/log/?h=whinlatter>` |
| - Tag: :yocto_git:`yocto-5.3 </meta-yocto/log/?h=yocto-5.3>` |
| - Git Revision: :yocto_git:`d02d3faaf4d6075ea03e9eb47654ec7639f929a0 </meta-yocto/commit/?id=d02d3faaf4d6075ea03e9eb47654ec7639f929a0>` |
| - Release Artefact: meta-yocto-d02d3faaf4d6075ea03e9eb47654ec7639f929a0 |
| - sha: e2a69bf93466cd010fd14e4f1b2bb5f45da165b00eb1fbf7987541d7a9378d47 |
| - Download Locations: |
| |
| https://downloads.yoctoproject.org/releases/yocto/yocto-5.3/meta-yocto-d02d3faaf4d6075ea03e9eb47654ec7639f929a0.tar.bz2 |
| |
| https://mirrors.kernel.org/yocto/yocto/yocto-5.3/meta-yocto-d02d3faaf4d6075ea03e9eb47654ec7639f929a0.tar.bz2 |
| |
| meta-mingw |
| |
| - Repository Location: :yocto_git:`/meta-mingw` |
| - Branch: :yocto_git:`whinlatter </meta-mingw/log/?h=whinlatter>` |
| - Tag: :yocto_git:`yocto-5.3 </meta-mingw/log/?h=yocto-5.3>` |
| - Git Revision: :yocto_git:` </meta-mingw/commit/?id=00323de97e397d4f6734ef2191806616989f5e10>` |
| - Release Artefact: meta-mingw-00323de97e397d4f6734ef2191806616989f5e10 |
| - sha: c9a70539b12c0642596fde6a2766d4a6a8fec8b2a366453fb6473363127a1c77 |
| - Download Locations: |
| |
| https://downloads.yoctoproject.org/releases/yocto/yocto-5.3/meta-mingw-00323de97e397d4f6734ef2191806616989f5e10.tar.bz2 |
| |
| https://mirrors.kernel.org/yocto/yocto/yocto-5.3/meta-mingw-00323de97e397d4f6734ef2191806616989f5e10.tar.bz2 |
| |
| bitbake |
| |
| - Repository Location: :oe_git:`/bitbake` |
| - Branch: :oe_git:`2.16 </bitbake/log/?h=2.16>` |
| - Tag: :oe_git:`yocto-5.3 </bitbake/log/?h=yocto-5.3>` |
| - Git Revision: :oe_git:`720df1a53452983c1c832f624490e255cf389204 </bitbake/commit/?id=720df1a53452983c1c832f624490e255cf389204>` |
| - Release Artefact: bitbake-720df1a53452983c1c832f624490e255cf389204 |
| - sha: 08a5d8914b59e904a805fbf0e76058dfeddd49f4a022298a3c1485b98233db24 |
| - Download Locations: |
| |
| https://downloads.yoctoproject.org/releases/yocto/yocto-5.3/bitbake-720df1a53452983c1c832f624490e255cf389204.tar.bz2 |
| |
| https://mirrors.kernel.org/yocto/yocto/yocto-5.3/bitbake-720df1a53452983c1c832f624490e255cf389204.tar.bz2 |
| |
| |
