include/configs/ae350.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2017 Andes Technology Corporation
 * Rick Chen, Andes Technology Corporation <rick@andestech.com>
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define RISCV_MMODE_TIMERBASE           0xe6000000
#define RISCV_MMODE_TIMER_FREQ          60000000

#define RISCV_SMODE_TIMER_FREQ          60000000

/*
 * CPU and Board Configuration Options
 */

/*
 * Miscellaneous configurable options
 */

/*
 * Physical Memory Map
 */
#define PHYS_SDRAM_0	0x00000000		/* SDRAM Bank #1 */
#define PHYS_SDRAM_1	\
	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
#define PHYS_SDRAM_0_SIZE	0x20000000	/* 512 MB */
#define PHYS_SDRAM_1_SIZE	0x20000000	/* 512 MB */
#define CFG_SYS_SDRAM_BASE	PHYS_SDRAM_0

/*
 * Serial console configuration
 */
#define CFG_SYS_NS16550_CLK		19660800

/* Init Stack Pointer */

/* support JEDEC */
#define PHYS_FLASH_1			0x88000000	/* BANK 0 */
#define CFG_SYS_FLASH_BASE		PHYS_FLASH_1
#define CFG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }

/* max number of memory banks */
/*
 * There are 4 banks supported for this Controller,
 * but we have only 1 bank connected to flash on board
*/
#define CFG_SYS_FLASH_BANKS_SIZES {0x4000000}

/* environments */

/* SPI FLASH */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */

/* Initial Memory map for Linux*/
#define CFG_SYS_BOOTMAPSZ	(64 << 20)
/* Increase max gunzip size */

/* Support autoboot from RAM (kernel image is loaded via debug port) */
#define KERNEL_IMAGE_ADDR	"0x2000000 "
#define BOOTENV_DEV_NAME_RAM(devtypeu, devtypel, instance) \
	"ram "
#define BOOTENV_DEV_RAM(devtypeu, devtypel, instance) \
	"bootcmd_ram=" \
	"booti " \
	KERNEL_IMAGE_ADDR \
	"- $fdtcontroladdr\0"

/* When we use RAM as ENV */

/* Enable distro boot */
#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(DHCP, dhcp, na) \
	func(RAM, ram, na)
#include <config_distro_bootcmd.h>

#define CFG_EXTRA_ENV_SETTINGS	\
				"initrd_high=0xffffffffffffffff\0" \
				"kernel_addr_r=0x00600000\0" \
				"kernel_comp_addr_r=0x04600000\0" \
				"kernel_comp_size=0x04000000\0" \
				"pxefile_addr_r=0x08600000\0" \
				"scriptaddr=0x08700000\0" \
				"fdt_addr_r=0x08800000\0" \
				"ramdisk_addr_r=0x08900000\0" \
				BOOTENV

#endif /* __CONFIG_H */