| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * (C) Copyright 2012 | |
| * Linaro | |
| * Linus Walleij <linus.walleij@linaro.org> | |
| * Common ARM Integrator configuration settings | |
| */ | |
| #define CFG_SYS_TIMERBASE 0x13000100 /* Timer1 */ | |
| /* | |
| * The ARM boot monitor initializes the board. | |
| * However, the default U-Boot code also performs the initialization. | |
| * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT | |
| * - see documentation supplied with board for details of how to choose the | |
| * image to run at reset/power up | |
| * e.g. whether the ARM Boot Monitor runs before U-Boot | |
| */ | |
| /* | |
| * The ARM boot monitor does not relocate U-Boot. | |
| * However, the default U-Boot code performs the relocation check, | |
| * and may relocate the code if the memory map is changed. | |
| * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT | |
| */ | |
| /* #define SKIP_CONFIG_RELOCATE_UBOOT */ | |
| /* | |
| * Physical Memory Map | |
| */ | |
| #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ | |
| #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ | |
| #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 | |
| /* | |
| * FLASH and environment organization | |
| * Top varies according to amount fitted | |
| * Reserve top 4 blocks of flash | |
| * - ARM Boot Monitor | |
| * - Unused | |
| * - SIB block | |
| * - U-Boot environment | |
| */ | |
| #define CFG_SYS_FLASH_BASE 0x24000000 | |
| /* Timeout values in ticks */ |