| /* SPDX-License-Identifier: MIT | |
| * | |
| * xen.h | |
| * | |
| * Guest OS interface to Xen. | |
| * | |
| * Copyright (c) 2004, K A Fraser | |
| */ | |
| #ifndef __XEN_PUBLIC_XEN_H__ | |
| #define __XEN_PUBLIC_XEN_H__ | |
| #include <xen/arm/interface.h> | |
| /* | |
| * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS). | |
| */ | |
| /* | |
| * x86_32: EAX = vector; EBX, ECX, EDX, ESI, EDI = args 1, 2, 3, 4, 5. | |
| * EAX = return value | |
| * (argument registers may be clobbered on return) | |
| * x86_64: RAX = vector; RDI, RSI, RDX, R10, R8, R9 = args 1, 2, 3, 4, 5, 6. | |
| * RAX = return value | |
| * (argument registers not clobbered on return; RCX, R11 are) | |
| */ | |
| #define __HYPERVISOR_set_trap_table 0 | |
| #define __HYPERVISOR_mmu_update 1 | |
| #define __HYPERVISOR_set_gdt 2 | |
| #define __HYPERVISOR_stack_switch 3 | |
| #define __HYPERVISOR_set_callbacks 4 | |
| #define __HYPERVISOR_fpu_taskswitch 5 | |
| #define __HYPERVISOR_sched_op_compat 6 | |
| #define __HYPERVISOR_platform_op 7 | |
| #define __HYPERVISOR_set_debugreg 8 | |
| #define __HYPERVISOR_get_debugreg 9 | |
| #define __HYPERVISOR_update_descriptor 10 | |
| #define __HYPERVISOR_memory_op 12 | |
| #define __HYPERVISOR_multicall 13 | |
| #define __HYPERVISOR_update_va_mapping 14 | |
| #define __HYPERVISOR_set_timer_op 15 | |
| #define __HYPERVISOR_event_channel_op_compat 16 | |
| #define __HYPERVISOR_xen_version 17 | |
| #define __HYPERVISOR_console_io 18 | |
| #define __HYPERVISOR_physdev_op_compat 19 | |
| #define __HYPERVISOR_grant_table_op 20 | |
| #define __HYPERVISOR_vm_assist 21 | |
| #define __HYPERVISOR_update_va_mapping_otherdomain 22 | |
| #define __HYPERVISOR_iret 23 /* x86 only */ | |
| #define __HYPERVISOR_vcpu_op 24 | |
| #define __HYPERVISOR_set_segment_base 25 /* x86/64 only */ | |
| #define __HYPERVISOR_mmuext_op 26 | |
| #define __HYPERVISOR_xsm_op 27 | |
| #define __HYPERVISOR_nmi_op 28 | |
| #define __HYPERVISOR_sched_op 29 | |
| #define __HYPERVISOR_callback_op 30 | |
| #define __HYPERVISOR_xenoprof_op 31 | |
| #define __HYPERVISOR_event_channel_op 32 | |
| #define __HYPERVISOR_physdev_op 33 | |
| #define __HYPERVISOR_hvm_op 34 | |
| #define __HYPERVISOR_sysctl 35 | |
| #define __HYPERVISOR_domctl 36 | |
| #define __HYPERVISOR_kexec_op 37 | |
| #define __HYPERVISOR_tmem_op 38 | |
| #define __HYPERVISOR_xc_reserved_op 39 /* reserved for XenClient */ | |
| #define __HYPERVISOR_xenpmu_op 40 | |
| #define __HYPERVISOR_dm_op 41 | |
| /* Architecture-specific hypercall definitions. */ | |
| #define __HYPERVISOR_arch_0 48 | |
| #define __HYPERVISOR_arch_1 49 | |
| #define __HYPERVISOR_arch_2 50 | |
| #define __HYPERVISOR_arch_3 51 | |
| #define __HYPERVISOR_arch_4 52 | |
| #define __HYPERVISOR_arch_5 53 | |
| #define __HYPERVISOR_arch_6 54 | |
| #define __HYPERVISOR_arch_7 55 | |
| #ifndef __ASSEMBLY__ | |
| typedef u16 domid_t; | |
| /* Domain ids >= DOMID_FIRST_RESERVED cannot be used for ordinary domains. */ | |
| #define DOMID_FIRST_RESERVED (0x7FF0U) | |
| /* DOMID_SELF is used in certain contexts to refer to oneself. */ | |
| #define DOMID_SELF (0x7FF0U) | |
| /* | |
| * DOMID_IO is used to restrict page-table updates to mapping I/O memory. | |
| * Although no Foreign Domain need be specified to map I/O pages, DOMID_IO | |
| * is useful to ensure that no mappings to the OS's own heap are accidentally | |
| * installed. (e.g., in Linux this could cause havoc as reference counts | |
| * aren't adjusted on the I/O-mapping code path). | |
| * This only makes sense in MMUEXT_SET_FOREIGNDOM, but in that context can | |
| * be specified by any calling domain. | |
| */ | |
| #define DOMID_IO (0x7FF1U) | |
| /* | |
| * DOMID_XEN is used to allow privileged domains to map restricted parts of | |
| * Xen's heap space (e.g., the machine_to_phys table). | |
| * This only makes sense in MMUEXT_SET_FOREIGNDOM, and is only permitted if | |
| * the caller is privileged. | |
| */ | |
| #define DOMID_XEN (0x7FF2U) | |
| /* DOMID_COW is used as the owner of sharable pages */ | |
| #define DOMID_COW (0x7FF3U) | |
| /* DOMID_INVALID is used to identify pages with unknown owner. */ | |
| #define DOMID_INVALID (0x7FF4U) | |
| /* Idle domain. */ | |
| #define DOMID_IDLE (0x7FFFU) | |
| struct vcpu_info { | |
| /* | |
| * 'evtchn_upcall_pending' is written non-zero by Xen to indicate | |
| * a pending notification for a particular VCPU. It is then cleared | |
| * by the guest OS /before/ checking for pending work, thus avoiding | |
| * a set-and-check race. Note that the mask is only accessed by Xen | |
| * on the CPU that is currently hosting the VCPU. This means that the | |
| * pending and mask flags can be updated by the guest without special | |
| * synchronisation (i.e., no need for the x86 LOCK prefix). | |
| * This may seem suboptimal because if the pending flag is set by | |
| * a different CPU then an IPI may be scheduled even when the mask | |
| * is set. However, note: | |
| * 1. The task of 'interrupt holdoff' is covered by the per-event- | |
| * channel mask bits. A 'noisy' event that is continually being | |
| * triggered can be masked at source at this very precise | |
| * granularity. | |
| * 2. The main purpose of the per-VCPU mask is therefore to restrict | |
| * reentrant execution: whether for concurrency control, or to | |
| * prevent unbounded stack usage. Whatever the purpose, we expect | |
| * that the mask will be asserted only for short periods at a time, | |
| * and so the likelihood of a 'spurious' IPI is suitably small. | |
| * The mask is read before making an event upcall to the guest: a | |
| * non-zero mask therefore guarantees that the VCPU will not receive | |
| * an upcall activation. The mask is cleared when the VCPU requests | |
| * to block: this avoids wakeup-waiting races. | |
| */ | |
| u8 evtchn_upcall_pending; | |
| u8 evtchn_upcall_mask; | |
| xen_ulong_t evtchn_pending_sel; | |
| struct arch_vcpu_info arch; | |
| struct pvclock_vcpu_time_info time; | |
| }; /* 64 bytes (x86) */ | |
| /* | |
| * Xen/kernel shared data -- pointer provided in start_info. | |
| * NB. We expect that this struct is smaller than a page. | |
| */ | |
| struct shared_info { | |
| struct vcpu_info vcpu_info[MAX_VIRT_CPUS]; | |
| /* | |
| * A domain can create "event channels" on which it can send and receive | |
| * asynchronous event notifications. There are three classes of event that | |
| * are delivered by this mechanism: | |
| * 1. Bi-directional inter- and intra-domain connections. Domains must | |
| * arrange out-of-band to set up a connection (usually by allocating | |
| * an unbound 'listener' port and avertising that via a storage service | |
| * such as xenstore). | |
| * 2. Physical interrupts. A domain with suitable hardware-access | |
| * privileges can bind an event-channel port to a physical interrupt | |
| * source. | |
| * 3. Virtual interrupts ('events'). A domain can bind an event-channel | |
| * port to a virtual interrupt source, such as the virtual-timer | |
| * device or the emergency console. | |
| * | |
| * Event channels are addressed by a "port index". Each channel is | |
| * associated with two bits of information: | |
| * 1. PENDING -- notifies the domain that there is a pending notification | |
| * to be processed. This bit is cleared by the guest. | |
| * 2. MASK -- if this bit is clear then a 0->1 transition of PENDING | |
| * will cause an asynchronous upcall to be scheduled. This bit is only | |
| * updated by the guest. It is read-only within Xen. If a channel | |
| * becomes pending while the channel is masked then the 'edge' is lost | |
| * (i.e., when the channel is unmasked, the guest must manually handle | |
| * pending notifications as no upcall will be scheduled by Xen). | |
| * | |
| * To expedite scanning of pending notifications, any 0->1 pending | |
| * transition on an unmasked channel causes a corresponding bit in a | |
| * per-vcpu selector word to be set. Each bit in the selector covers a | |
| * 'C long' in the PENDING bitfield array. | |
| */ | |
| xen_ulong_t evtchn_pending[sizeof(xen_ulong_t) * 8]; | |
| xen_ulong_t evtchn_mask[sizeof(xen_ulong_t) * 8]; | |
| /* | |
| * Wallclock time: updated only by control software. Guests should base | |
| * their gettimeofday() syscall on this wallclock-base value. | |
| */ | |
| struct pvclock_wall_clock wc; | |
| struct arch_shared_info arch; | |
| }; | |
| #else /* __ASSEMBLY__ */ | |
| /* In assembly code we cannot use C numeric constant suffixes. */ | |
| #define mk_unsigned_long(x) x | |
| #endif /* !__ASSEMBLY__ */ | |
| #endif /* __XEN_PUBLIC_XEN_H__ */ |