| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * (C) Copyright 2010, 2011 | |
| * NVIDIA Corporation <www.nvidia.com> | |
| */ | |
| #ifndef _WARM_BOOT_H_ | |
| #define _WARM_BOOT_H_ | |
| #define STRAP_OPT_A_RAM_CODE_SHIFT 4 | |
| #define STRAP_OPT_A_RAM_CODE_MASK (0xf << STRAP_OPT_A_RAM_CODE_SHIFT) | |
| /* Defines the supported operating modes */ | |
| enum fuse_operating_mode { | |
| MODE_PRODUCTION = 3, | |
| MODE_UNDEFINED, | |
| }; | |
| /* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */ | |
| enum { | |
| HASH_LENGTH = 4 | |
| }; | |
| /* Defines the storage for a hash value (128 bits) */ | |
| struct hash { | |
| u32 hash[HASH_LENGTH]; | |
| }; | |
| /* | |
| * Defines the code header information for the boot rom. | |
| * | |
| * The code immediately follows the code header. | |
| * | |
| * Note that the code header needs to be 16 bytes aligned to preserve | |
| * the alignment of relevant data for hash and decryption computations without | |
| * requiring extra copies to temporary memory areas. | |
| */ | |
| struct wb_header { | |
| u32 length_insecure; /* length of the code header */ | |
| u32 reserved[3]; | |
| struct hash hash; /* hash of header+code, starts next field*/ | |
| struct hash random_aes_block; /* a data block to aid security. */ | |
| u32 length_secure; /* length of the code header */ | |
| u32 destination; /* destination address to put the wb code */ | |
| u32 entry_point; /* execution address of the wb code */ | |
| u32 code_length; /* length of the code */ | |
| }; | |
| /* | |
| * The warm boot code needs direct access to these registers since it runs in | |
| * SRAM and cannot call other U-Boot code. | |
| */ | |
| union osc_ctrl_reg { | |
| struct { | |
| u32 xoe:1; | |
| u32 xobp:1; | |
| u32 reserved0:2; | |
| u32 xofs:6; | |
| u32 reserved1:2; | |
| u32 xods:5; | |
| u32 reserved2:3; | |
| u32 oscfi_spare:8; | |
| u32 pll_ref_div:2; | |
| u32 osc_freq:2; | |
| }; | |
| u32 word; | |
| }; | |
| union pllx_base_reg { | |
| struct { | |
| u32 divm:5; | |
| u32 reserved0:3; | |
| u32 divn:10; | |
| u32 reserved1:2; | |
| u32 divp:3; | |
| u32 reserved2:4; | |
| u32 lock:1; | |
| u32 reserved3:1; | |
| u32 ref_dis:1; | |
| u32 enable:1; | |
| u32 bypass:1; | |
| }; | |
| u32 word; | |
| }; | |
| union pllx_misc_reg { | |
| struct { | |
| u32 vcocon:4; | |
| u32 lfcon:4; | |
| u32 cpcon:4; | |
| u32 lock_sel:6; | |
| u32 reserved0:1; | |
| u32 lock_enable:1; | |
| u32 reserved1:1; | |
| u32 dccon:1; | |
| u32 pts:2; | |
| u32 reserved2:6; | |
| u32 out1_div_byp:1; | |
| u32 out1_inv_clk:1; | |
| }; | |
| u32 word; | |
| }; | |
| /* | |
| * TODO: This register is not documented in the TRM yet. We could move this | |
| * into the EMC and give it a proper interface, but not while it is | |
| * undocumented. | |
| */ | |
| union scratch3_reg { | |
| struct { | |
| u32 pllx_base_divm:5; | |
| u32 pllx_base_divn:10; | |
| u32 pllx_base_divp:3; | |
| u32 pllx_misc_lfcon:4; | |
| u32 pllx_misc_cpcon:4; | |
| }; | |
| u32 word; | |
| }; | |
| /** | |
| * Save warmboot memory settings for a later resume | |
| * | |
| * Return: 0 if ok, -1 on error | |
| */ | |
| int warmboot_save_sdram_params(void); | |
| int warmboot_prepare_code(u32 seg_address, u32 seg_length); | |
| int sign_data_block(u8 *source, u32 length, u8 *signature); | |
| void wb_start(void); /* Start of WB assembly code */ | |
| void wb_end(void); /* End of WB assembly code */ | |
| #endif |