| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * This is the interface to the sandbox GPIO driver for test code which | |
| * wants to change the GPIO values reported to U-Boot. | |
| * | |
| * Copyright (c) 2011 The Chromium OS Authors. | |
| */ | |
| #ifndef __ASM_SANDBOX_GPIO_H | |
| #define __ASM_SANDBOX_GPIO_H | |
| /* | |
| * We use the generic interface, and add a back-channel. | |
| * | |
| * The back-channel functions are declared in this file. They should not be used | |
| * except in test code. | |
| * | |
| * Test code can, for example, call sandbox_gpio_set_value() to set the value of | |
| * a simulated GPIO. From then on, normal code in U-Boot will see this new | |
| * value when it calls gpio_get_value(). | |
| * | |
| * NOTE: DO NOT use the functions in this file except in test code! | |
| */ | |
| #include <asm-generic/gpio.h> | |
| /* Our own private GPIO flags, which musn't conflict with GPIOD_... */ | |
| #define GPIOD_EXT_HIGH BIT(31) /* external source is high (else low) */ | |
| #define GPIOD_EXT_DRIVEN BIT(30) /* external source is driven */ | |
| #define GPIOD_EXT_PULL_UP BIT(29) /* GPIO has external pull-up */ | |
| #define GPIOD_EXT_PULL_DOWN BIT(28) /* GPIO has external pull-down */ | |
| #define GPIOD_EXT_PULL (BIT(28) | BIT(29)) | |
| #define GPIOD_SANDBOX_MASK GENMASK(31, 28) | |
| /** | |
| * Return the simulated value of a GPIO (used only in sandbox test code) | |
| * | |
| * @param dev device to use | |
| * @param offset GPIO offset within bank | |
| * Return: -1 on error, 0 if GPIO is low, >0 if high | |
| */ | |
| int sandbox_gpio_get_value(struct udevice *dev, unsigned int offset); | |
| /** | |
| * Set the simulated value of a GPIO (used only in sandbox test code) | |
| * | |
| * @param dev device to use | |
| * @param offset GPIO offset within bank | |
| * @param value value to set (0 for low, non-zero for high) | |
| * Return: -1 on error, 0 if ok | |
| */ | |
| int sandbox_gpio_set_value(struct udevice *dev, unsigned int offset, int value); | |
| /** | |
| * Return the simulated direction of a GPIO (used only in sandbox test code) | |
| * | |
| * @param dev device to use | |
| * @param offset GPIO offset within bank | |
| * Return: -1 on error, 0 if GPIO is input, >0 if output | |
| */ | |
| int sandbox_gpio_get_direction(struct udevice *dev, unsigned int offset); | |
| /** | |
| * Set the simulated direction of a GPIO (used only in sandbox test code) | |
| * | |
| * @param dev device to use | |
| * @param offset GPIO offset within bank | |
| * @param output 0 to set as input, 1 to set as output | |
| * Return: -1 on error, 0 if ok | |
| */ | |
| int sandbox_gpio_set_direction(struct udevice *dev, unsigned int offset, | |
| int output); | |
| /** | |
| * Return the simulated flags of a GPIO (used only in sandbox test code) | |
| * | |
| * @param dev device to use | |
| * @param offset GPIO offset within bank | |
| * Return: dir_flags: bitfield accesses by GPIOD_ defines | |
| */ | |
| ulong sandbox_gpio_get_flags(struct udevice *dev, unsigned int offset); | |
| /** | |
| * Set the simulated flags of a GPIO (used only in sandbox test code) | |
| * | |
| * @param dev device to use | |
| * @param offset GPIO offset within bank | |
| * @param flags bitfield accesses by GPIOD_ defines | |
| * Return: -1 on error, 0 if ok | |
| */ | |
| int sandbox_gpio_set_flags(struct udevice *dev, unsigned int offset, | |
| ulong flags); | |
| #endif |