| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved | |
| */ | |
| #include <command.h> | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <dm/pinctrl.h> | |
| #include <dm/uclass-internal.h> | |
| #define LIMIT_DEVNAME 30 | |
| static struct udevice *currdev; | |
| static int do_dev(struct cmd_tbl *cmdtp, int flag, int argc, | |
| char *const argv[]) | |
| { | |
| const char *name; | |
| int ret; | |
| switch (argc) { | |
| case 2: | |
| name = argv[1]; | |
| ret = uclass_get_device_by_name(UCLASS_PINCTRL, name, &currdev); | |
| if (ret) { | |
| printf("Can't get the pin-controller: %s!\n", name); | |
| return CMD_RET_FAILURE; | |
| } | |
| /* fall through */ | |
| case 1: | |
| if (!currdev) { | |
| printf("Pin-controller device is not set!\n"); | |
| return CMD_RET_USAGE; | |
| } | |
| printf("dev: %s\n", currdev->name); | |
| } | |
| return CMD_RET_SUCCESS; | |
| } | |
| /** | |
| * Print the muxing information for one or all pins of one pinctrl device | |
| * | |
| * @param dev pinctrl device | |
| * @param name NULL to display all the pins | |
| * or name of the pin to display | |
| * Return: 0 on success, non-0 on error | |
| */ | |
| static int show_pinmux(struct udevice *dev, char *name) | |
| { | |
| char pin_name[PINNAME_SIZE]; | |
| char pin_mux[PINMUX_SIZE]; | |
| int pins_count; | |
| int i; | |
| int ret; | |
| bool found = false; | |
| pins_count = pinctrl_get_pins_count(dev); | |
| if (pins_count == -ENOSYS) { | |
| printf("Ops get_pins_count not supported by %s\n", dev->name); | |
| return pins_count; | |
| } | |
| for (i = 0; i < pins_count; i++) { | |
| ret = pinctrl_get_pin_name(dev, i, pin_name, PINNAME_SIZE); | |
| if (ret) { | |
| printf("Ops get_pin_name error (%d) by %s\n", ret, dev->name); | |
| return ret; | |
| } | |
| if (name && strcmp(name, pin_name)) | |
| continue; | |
| found = true; | |
| ret = pinctrl_get_pin_muxing(dev, i, pin_mux, PINMUX_SIZE); | |
| if (ret) { | |
| printf("Ops get_pin_muxing error (%d) by %s in %s\n", | |
| ret, pin_name, dev->name); | |
| return ret; | |
| } | |
| printf("%-*s: %-*s\n", PINNAME_SIZE, pin_name, | |
| PINMUX_SIZE, pin_mux); | |
| } | |
| if (!found) | |
| return -ENOENT; | |
| return 0; | |
| } | |
| static int do_status(struct cmd_tbl *cmdtp, int flag, int argc, | |
| char *const argv[]) | |
| { | |
| struct udevice *dev; | |
| char *name; | |
| int ret; | |
| if (argc < 2) { | |
| if (!currdev) { | |
| printf("pin-controller device not selected\n"); | |
| return CMD_RET_FAILURE; | |
| } | |
| show_pinmux(currdev, NULL); | |
| return CMD_RET_SUCCESS; | |
| } | |
| if (strcmp(argv[1], "-a")) | |
| name = argv[1]; | |
| else | |
| name = NULL; | |
| uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { | |
| if (!name) { | |
| /* insert a separator between each pin-controller display */ | |
| printf("--------------------------\n"); | |
| printf("%s:\n", dev->name); | |
| } | |
| ret = show_pinmux(dev, name); | |
| /* stop when the status of requested pin is displayed */ | |
| if (name && !ret) | |
| return CMD_RET_SUCCESS; | |
| } | |
| if (name) { | |
| printf("%s not found\n", name); | |
| return CMD_RET_FAILURE; | |
| } | |
| return CMD_RET_SUCCESS; | |
| } | |
| static int do_list(struct cmd_tbl *cmdtp, int flag, int argc, | |
| char *const argv[]) | |
| { | |
| struct udevice *dev; | |
| printf("| %-*.*s| %-*.*s| %s\n", | |
| LIMIT_DEVNAME, LIMIT_DEVNAME, "Device", | |
| LIMIT_DEVNAME, LIMIT_DEVNAME, "Driver", | |
| "Parent"); | |
| uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { | |
| printf("| %-*.*s| %-*.*s| %s\n", | |
| LIMIT_DEVNAME, LIMIT_DEVNAME, dev->name, | |
| LIMIT_DEVNAME, LIMIT_DEVNAME, dev->driver->name, | |
| dev->parent->name); | |
| } | |
| return CMD_RET_SUCCESS; | |
| } | |
| static struct cmd_tbl pinmux_subcmd[] = { | |
| U_BOOT_CMD_MKENT(dev, 2, 1, do_dev, "", ""), | |
| U_BOOT_CMD_MKENT(list, 1, 1, do_list, "", ""), | |
| U_BOOT_CMD_MKENT(status, 2, 1, do_status, "", ""), | |
| }; | |
| static int do_pinmux(struct cmd_tbl *cmdtp, int flag, int argc, | |
| char *const argv[]) | |
| { | |
| struct cmd_tbl *cmd; | |
| argc--; | |
| argv++; | |
| cmd = find_cmd_tbl(argv[0], pinmux_subcmd, ARRAY_SIZE(pinmux_subcmd)); | |
| if (!cmd || argc > cmd->maxargs) | |
| return CMD_RET_USAGE; | |
| return cmd->cmd(cmdtp, flag, argc, argv); | |
| } | |
| U_BOOT_CMD(pinmux, CONFIG_SYS_MAXARGS, 1, do_pinmux, | |
| "show pin-controller muxing", | |
| "list - list UCLASS_PINCTRL devices\n" | |
| "pinmux dev [pincontroller-name] - select pin-controller device\n" | |
| "pinmux status [-a | pin-name] - print pin-controller muxing [for all | for pin-name]\n" | |
| ); |