| # SPDX-License-Identifier: GPL-2.0+ | |
| obj-$(CONFIG_$(SPL_TPL_)BIOSEMU) += bios_emulator/ | |
| obj-$(CONFIG_$(SPL_TPL_)BLK) += block/ | |
| obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/ | |
| obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/ | |
| obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/ | |
| obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ | |
| obj-$(CONFIG_$(SPL_TPL_)DM) += core/ | |
| obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/ | |
| obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/ | |
| obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/ | |
| obj-$(CONFIG_$(SPL_TPL_)EXTCON) += extcon/ | |
| obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/ | |
| obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/ | |
| obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/ | |
| obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/ | |
| obj-$(CONFIG_$(SPL_TPL_)I2C) += i2c/ | |
| obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ | |
| obj-$(CONFIG_$(SPL_TPL_)LED) += led/ | |
| obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/ | |
| obj-y += mtd/ | |
| obj-$(CONFIG_$(SPL_TPL_)ETH) += net/ | |
| obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/ | |
| obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/ | |
| obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ | |
| obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ | |
| obj-$(CONFIG_$(SPL_TPL_)POWER) += power/ | |
| obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ | |
| obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/ | |
| obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/ | |
| obj-$(CONFIG_$(SPL_TPL_)SPI) += spi/ | |
| obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ | |
| obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/ | |
| obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ | |
| obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ | |
| obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/ | |
| obj-$(CONFIG_$(SPL_TPL_)SM) += sm/ | |
| obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ | |
| obj-$(CONFIG_$(SPL_)NVME) += nvme/ | |
| obj-$(CONFIG_XEN) += xen/ | |
| obj-$(CONFIG_$(SPL_)FPGA) += fpga/ | |
| obj-$(CONFIG_$(SPL_)VIDEO) += video/ | |
| obj-y += bus/ | |
| ifndef CONFIG_TPL_BUILD | |
| ifndef CONFIG_VPL_BUILD | |
| ifdef CONFIG_SPL_BUILD | |
| obj-$(CONFIG_SPL_CPU) += cpu/ | |
| obj-$(CONFIG_SPL_CRYPTO) += crypto/ | |
| obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR) += ddr/fsl/ | |
| obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ | |
| obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ | |
| obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/ | |
| obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/ | |
| obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/ | |
| obj-$(CONFIG_ARCH_IMX9) += ddr/imx/imx9/ | |
| obj-$(CONFIG_DRAM_SUN20I_D1) += ram/ | |
| obj-$(CONFIG_SPL_DM_RESET) += reset/ | |
| obj-$(CONFIG_SPL_MUSB_NEW) += usb/musb-new/ | |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/ | |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/common/ | |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/ | |
| obj-$(CONFIG_SPL_WATCHDOG) += watchdog/ | |
| obj-$(CONFIG_SPL_USB_HOST) += usb/host/ | |
| obj-$(CONFIG_SPL_SATA) += ata/ scsi/ | |
| obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/ | |
| obj-$(CONFIG_SPL_THERMAL) += thermal/ | |
| endif | |
| endif | |
| endif | |
| ifdef CONFIG_TPL_BUILD | |
| obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/ | |
| endif | |
| ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) | |
| obj-y += adc/ | |
| obj-y += ata/ | |
| obj-$(CONFIG_DM_DEMO) += demo/ | |
| obj-y += block/ | |
| obj-y += cache/ | |
| obj-$(CONFIG_CPU) += cpu/ | |
| obj-y += crypto/ | |
| obj-$(CONFIG_FASTBOOT) += fastboot/ | |
| obj-$(CONFIG_FWU_MDATA) += fwu-mdata/ | |
| obj-y += misc/ | |
| obj-$(CONFIG_MMC) += mmc/ | |
| obj-$(CONFIG_MULTIPLEXER) += mux/ | |
| obj-$(CONFIG_NVME) += nvme/ | |
| obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ | |
| obj-y += dfu/ | |
| obj-$(CONFIG_PCH) += pch/ | |
| obj-$(CONFIG_DM_REBOOT_MODE) += reboot-mode/ | |
| obj-y += rtc/ | |
| obj-y += scsi/ | |
| obj-y += sound/ | |
| obj-y += spmi/ | |
| obj-y += watchdog/ | |
| obj-$(CONFIG_QE) += qe/ | |
| obj-$(CONFIG_U_QE) += qe/ | |
| obj-y += mailbox/ | |
| obj-y += memory/ | |
| obj-y += mfd/ | |
| obj-y += mtd/ | |
| obj-y += pwm/ | |
| obj-y += reset/ | |
| obj-y += input/ | |
| obj-y += iommu/ | |
| # SOC specific infrastructure drivers. | |
| obj-y += smem/ | |
| obj-y += thermal/ | |
| obj-$(CONFIG_TEE) += tee/ | |
| obj-$(CONFIG_ARM_FFA_TRANSPORT) += firmware/arm-ffa/ | |
| obj-y += axi/ | |
| obj-y += ufs/ | |
| obj-$(CONFIG_W1) += w1/ | |
| obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ | |
| obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ | |
| obj-$(CONFIG_FUZZ) += fuzz/ | |
| obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/ | |
| obj-$(CONFIG_$(SPL_TPL_)DM_RNG) += rng/ | |
| endif | |
| obj-y += soc/ |