| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2015 - 2016 Xilinx, Inc. | |
| * Michal Simek <michal.simek@amd.com> | |
| */ | |
| #include <dm.h> | |
| #include <ahci.h> | |
| #include <generic-phy.h> | |
| #include <log.h> | |
| #include <reset.h> | |
| #include <scsi.h> | |
| #include <asm/io.h> | |
| #include <dm/device_compat.h> | |
| #include <linux/ioport.h> | |
| /* Vendor Specific Register Offsets */ | |
| #define AHCI_VEND_PCFG 0xA4 | |
| #define AHCI_VEND_PPCFG 0xA8 | |
| #define AHCI_VEND_PP2C 0xAC | |
| #define AHCI_VEND_PP3C 0xB0 | |
| #define AHCI_VEND_PP4C 0xB4 | |
| #define AHCI_VEND_PP5C 0xB8 | |
| #define AHCI_VEND_AXICC 0xBc | |
| #define AHCI_VEND_PAXIC 0xC0 | |
| #define AHCI_VEND_PTC 0xC8 | |
| /* Vendor Specific Register bit definitions */ | |
| #define PAXIC_ADBW_BW64 0x1 | |
| #define PAXIC_MAWIDD (1 << 8) | |
| #define PAXIC_MARIDD (1 << 16) | |
| #define PAXIC_OTL (0x4 << 20) | |
| #define PCFG_TPSS_VAL (0x32 << 16) | |
| #define PCFG_TPRS_VAL (0x2 << 12) | |
| #define PCFG_PAD_VAL 0x2 | |
| #define PPCFG_TTA 0x1FFFE | |
| #define PPCFG_PSSO_EN (1 << 28) | |
| #define PPCFG_PSS_EN (1 << 29) | |
| #define PPCFG_ESDF_EN (1 << 31) | |
| #define PP2C_CIBGMN 0x0F | |
| #define PP2C_CIBGMX (0x25 << 8) | |
| #define PP2C_CIBGN (0x18 << 16) | |
| #define PP2C_CINMP (0x29 << 24) | |
| #define PP3C_CWBGMN 0x04 | |
| #define PP3C_CWBGMX (0x0B << 8) | |
| #define PP3C_CWBGN (0x08 << 16) | |
| #define PP3C_CWNMP (0x0F << 24) | |
| #define PP4C_BMX 0x0a | |
| #define PP4C_BNM (0x08 << 8) | |
| #define PP4C_SFD (0x4a << 16) | |
| #define PP4C_PTST (0x06 << 24) | |
| #define PP5C_RIT 0x60216 | |
| #define PP5C_RCT (0x7f0 << 20) | |
| #define PTC_RX_WM_VAL 0x40 | |
| #define PTC_RSVD (1 << 27) | |
| #define PORT0_BASE 0x100 | |
| #define PORT1_BASE 0x180 | |
| /* Port Control Register Bit Definitions */ | |
| #define PORT_SCTL_SPD_GEN3 (0x3 << 4) | |
| #define PORT_SCTL_SPD_GEN2 (0x2 << 4) | |
| #define PORT_SCTL_SPD_GEN1 (0x1 << 4) | |
| #define PORT_SCTL_IPM (0x3 << 8) | |
| #define PORT_BASE 0x100 | |
| #define PORT_OFFSET 0x80 | |
| #define NR_PORTS 2 | |
| #define DRV_NAME "ahci-ceva" | |
| #define CEVA_FLAG_BROKEN_GEN2 1 | |
| /* flag bit definition */ | |
| #define FLAG_COHERENT 1 | |
| /* register config value */ | |
| #define CEVA_PHY1_CFG 0xa003fffe | |
| #define CEVA_PHY2_CFG 0x28184d1f | |
| #define CEVA_PHY3_CFG 0x0e081509 | |
| #define CEVA_TRANS_CFG 0x08000029 | |
| #define CEVA_AXICC_CFG 0x3fffffff | |
| /* for ls1021a */ | |
| #define LS1021_AHCI_VEND_AXICC 0xC0 | |
| #define LS1021_CEVA_PHY2_CFG 0x28183414 | |
| #define LS1021_CEVA_PHY3_CFG 0x0e080e06 | |
| #define LS1021_CEVA_PHY4_CFG 0x064a080b | |
| #define LS1021_CEVA_PHY5_CFG 0x2aa86470 | |
| /* ecc val pair */ | |
| #define ECC_DIS_VAL_CH1 0x00020000 | |
| #define ECC_DIS_VAL_CH2 0x80000000 | |
| #define ECC_DIS_VAL_CH3 0x40000000 | |
| enum ceva_soc { | |
| CEVA_1V84, | |
| CEVA_LS1012A, | |
| CEVA_LS1021A, | |
| CEVA_LS1028A, | |
| CEVA_LS1043A, | |
| CEVA_LS1046A, | |
| CEVA_LS1088A, | |
| CEVA_LS2080A, | |
| }; | |
| struct ceva_sata_priv { | |
| ulong base; | |
| ulong ecc_base; | |
| enum ceva_soc soc; | |
| ulong flag; | |
| }; | |
| static int ceva_init_sata(struct ceva_sata_priv *priv) | |
| { | |
| ulong ecc_addr = priv->ecc_base; | |
| ulong base = priv->base; | |
| ulong tmp; | |
| switch (priv->soc) { | |
| case CEVA_1V84: | |
| tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL; | |
| writel(tmp, base + AHCI_VEND_PAXIC); | |
| tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | PCFG_PAD_VAL; | |
| writel(tmp, base + AHCI_VEND_PCFG); | |
| tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN; | |
| writel(tmp, base + AHCI_VEND_PPCFG); | |
| tmp = PTC_RX_WM_VAL | PTC_RSVD; | |
| writel(tmp, base + AHCI_VEND_PTC); | |
| break; | |
| case CEVA_LS1021A: | |
| if (!ecc_addr) | |
| return -EINVAL; | |
| writel(ECC_DIS_VAL_CH1, ecc_addr); | |
| writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG); | |
| writel(LS1021_CEVA_PHY2_CFG, base + AHCI_VEND_PP2C); | |
| writel(LS1021_CEVA_PHY3_CFG, base + AHCI_VEND_PP3C); | |
| writel(LS1021_CEVA_PHY4_CFG, base + AHCI_VEND_PP4C); | |
| writel(LS1021_CEVA_PHY5_CFG, base + AHCI_VEND_PP5C); | |
| writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC); | |
| break; | |
| case CEVA_LS1012A: | |
| case CEVA_LS1043A: | |
| case CEVA_LS1046A: | |
| if (!ecc_addr) | |
| return -EINVAL; | |
| writel(ECC_DIS_VAL_CH2, ecc_addr); | |
| /* fallthrough */ | |
| case CEVA_LS2080A: | |
| writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG); | |
| writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC); | |
| break; | |
| case CEVA_LS1028A: | |
| case CEVA_LS1088A: | |
| if (!ecc_addr) | |
| return -EINVAL; | |
| writel(ECC_DIS_VAL_CH3, ecc_addr); | |
| writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG); | |
| writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC); | |
| break; | |
| } | |
| if (priv->flag & FLAG_COHERENT) | |
| writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC); | |
| return 0; | |
| } | |
| static int sata_ceva_bind(struct udevice *dev) | |
| { | |
| struct udevice *scsi_dev; | |
| return ahci_bind_scsi(dev, &scsi_dev); | |
| } | |
| static int sata_ceva_probe(struct udevice *dev) | |
| { | |
| struct ceva_sata_priv *priv = dev_get_priv(dev); | |
| struct phy phy; | |
| int ret; | |
| struct reset_ctl_bulk resets; | |
| ret = generic_phy_get_by_index(dev, 0, &phy); | |
| if (!ret) { | |
| dev_dbg(dev, "Perform PHY initialization\n"); | |
| ret = generic_phy_init(&phy); | |
| if (ret) | |
| return ret; | |
| } else if (ret != -ENOENT) { | |
| dev_dbg(dev, "could not get phy (err %d)\n", ret); | |
| return ret; | |
| } | |
| /* reset is optional */ | |
| ret = reset_get_bulk(dev, &resets); | |
| if (ret && ret != -ENOTSUPP && ret != -ENOENT) { | |
| dev_dbg(dev, "Getting reset fails (err %d)\n", ret); | |
| return ret; | |
| } | |
| /* Just trigger reset when reset is specified */ | |
| if (!ret) { | |
| dev_dbg(dev, "Perform IP reset\n"); | |
| ret = reset_deassert_bulk(&resets); | |
| if (ret) { | |
| dev_dbg(dev, "Reset fails (err %d)\n", ret); | |
| reset_release_bulk(&resets); | |
| return ret; | |
| } | |
| } | |
| if (generic_phy_valid(&phy)) { | |
| dev_dbg(dev, "Perform PHY power on\n"); | |
| ret = generic_phy_power_on(&phy); | |
| if (ret) { | |
| dev_dbg(dev, "PHY power on failed (err %d)\n", ret); | |
| return ret; | |
| } | |
| } | |
| ceva_init_sata(priv); | |
| return ahci_probe_scsi(dev, priv->base); | |
| } | |
| static const struct udevice_id sata_ceva_ids[] = { | |
| { .compatible = "ceva,ahci-1v84", .data = CEVA_1V84 }, | |
| { .compatible = "fsl,ls1012a-ahci", .data = CEVA_LS1012A }, | |
| { .compatible = "fsl,ls1021a-ahci", .data = CEVA_LS1021A }, | |
| { .compatible = "fsl,ls1028a-ahci", .data = CEVA_LS1028A }, | |
| { .compatible = "fsl,ls1043a-ahci", .data = CEVA_LS1043A }, | |
| { .compatible = "fsl,ls1046a-ahci", .data = CEVA_LS1046A }, | |
| { .compatible = "fsl,ls1088a-ahci", .data = CEVA_LS1088A }, | |
| { .compatible = "fsl,ls2080a-ahci", .data = CEVA_LS2080A }, | |
| { } | |
| }; | |
| static int sata_ceva_of_to_plat(struct udevice *dev) | |
| { | |
| struct ceva_sata_priv *priv = dev_get_priv(dev); | |
| struct resource res_regs; | |
| int ret; | |
| if (dev_read_bool(dev, "dma-coherent")) | |
| priv->flag |= FLAG_COHERENT; | |
| priv->base = dev_read_addr(dev); | |
| if (priv->base == FDT_ADDR_T_NONE) | |
| return -EINVAL; | |
| ret = dev_read_resource_byname(dev, "sata-ecc", &res_regs); | |
| if (ret) | |
| priv->ecc_base = 0; | |
| else | |
| priv->ecc_base = res_regs.start; | |
| priv->soc = dev_get_driver_data(dev); | |
| debug("ccsr-sata-base %lx\t ecc-base %lx\n", | |
| priv->base, | |
| priv->ecc_base); | |
| return 0; | |
| } | |
| U_BOOT_DRIVER(ceva_host_blk) = { | |
| .name = "ceva_sata", | |
| .id = UCLASS_AHCI, | |
| .of_match = sata_ceva_ids, | |
| .bind = sata_ceva_bind, | |
| .ops = &scsi_ops, | |
| .priv_auto = sizeof(struct ceva_sata_priv), | |
| .probe = sata_ceva_probe, | |
| .of_to_plat = sata_ceva_of_to_plat, | |
| }; |