| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright 2014 Freescale Semiconductor, Inc. | |
| */ | |
| #include <config.h> | |
| #include <linux/libfdt.h> | |
| #include <fdt_support.h> | |
| #if CONFIG_SYS_FSL_SEC_COMPAT == 2 || CONFIG_SYS_FSL_SEC_COMPAT >= 4 | |
| #include <fsl_sec.h> | |
| #endif | |
| /* | |
| * update crypto node properties to a specified revision of the SEC | |
| * called with sec_rev == 0 if not on an E processor | |
| */ | |
| #if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ | |
| void fdt_fixup_crypto_node(void *blob, int sec_rev) | |
| { | |
| static const struct sec_rev_prop { | |
| u32 sec_rev; | |
| u32 num_channels; | |
| u32 channel_fifo_len; | |
| u32 exec_units_mask; | |
| u32 descriptor_types_mask; | |
| } sec_rev_prop_list[] = { | |
| { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ | |
| { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ | |
| { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ | |
| { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ | |
| { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ | |
| { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ | |
| { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ | |
| }; | |
| static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * | |
| sizeof("fsl,secX.Y")]; | |
| int crypto_node, sec_idx, err; | |
| char *p; | |
| u32 val; | |
| /* locate crypto node based on lowest common compatible */ | |
| crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); | |
| if (crypto_node == -FDT_ERR_NOTFOUND) | |
| return; | |
| /* delete it if not on an E-processor */ | |
| if (crypto_node > 0 && !sec_rev) { | |
| fdt_del_node(blob, crypto_node); | |
| return; | |
| } | |
| /* else we got called for possible uprev */ | |
| for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) | |
| if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) | |
| break; | |
| if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { | |
| puts("warning: unknown SEC revision number\n"); | |
| return; | |
| } | |
| err = fdt_setprop_u32(blob, crypto_node, "fsl,num-channels", | |
| sec_rev_prop_list[sec_idx].num_channels); | |
| if (err < 0) | |
| printf("WARNING: could not set crypto property: %s\n", | |
| fdt_strerror(err)); | |
| err = fdt_setprop_u32(blob, crypto_node, "fsl,descriptor-types-mask", | |
| sec_rev_prop_list[sec_idx].descriptor_types_mask); | |
| if (err < 0) | |
| printf("WARNING: could not set crypto property: %s\n", | |
| fdt_strerror(err)); | |
| err = fdt_setprop_u32(blob, crypto_node, "fsl,exec-units-mask", | |
| sec_rev_prop_list[sec_idx].exec_units_mask); | |
| if (err < 0) | |
| printf("WARNING: could not set crypto property: %s\n", | |
| fdt_strerror(err)); | |
| err = fdt_setprop_u32(blob, crypto_node, "fsl,channel-fifo-len", | |
| sec_rev_prop_list[sec_idx].channel_fifo_len); | |
| if (err < 0) | |
| printf("WARNING: could not set crypto property: %s\n", | |
| fdt_strerror(err)); | |
| val = 0; | |
| while (sec_idx >= 0) { | |
| p = compat_strlist + val; | |
| val += sprintf(p, "fsl,sec%d.%d", | |
| (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, | |
| sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; | |
| sec_idx--; | |
| } | |
| err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, | |
| val); | |
| if (err < 0) | |
| printf("WARNING: could not set crypto property: %s\n", | |
| fdt_strerror(err)); | |
| } | |
| #elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ | |
| /** | |
| * caam_get_era() - fetch the CAAM's era | |
| * | |
| * The SEC module povides an "Era" which can be used to differentiate | |
| * between different revisions. | |
| * | |
| * Return: era of the SEC. | |
| */ | |
| u8 caam_get_era(void) | |
| { | |
| static const struct { | |
| u16 ip_id; | |
| u8 maj_rev; | |
| u8 era; | |
| } caam_eras[] = { | |
| {0x0A10, 1, 1}, | |
| {0x0A10, 2, 2}, | |
| {0x0A12, 1, 3}, | |
| {0x0A14, 1, 3}, | |
| {0x0A14, 2, 4}, | |
| {0x0A16, 1, 4}, | |
| {0x0A10, 3, 4}, | |
| {0x0A11, 1, 4}, | |
| {0x0A18, 1, 4}, | |
| {0x0A11, 2, 5}, | |
| {0x0A12, 2, 5}, | |
| {0x0A13, 1, 5}, | |
| {0x0A1C, 1, 5} | |
| }; | |
| ccsr_sec_t __iomem *sec = (void __iomem *)CFG_SYS_FSL_SEC_ADDR; | |
| u32 secvid_ms = sec_in32(&sec->secvid_ms); | |
| u32 ccbvid = sec_in32(&sec->ccbvid); | |
| u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >> | |
| SEC_SECVID_MS_IPID_SHIFT; | |
| u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >> | |
| SEC_SECVID_MS_MAJ_REV_SHIFT; | |
| u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT; | |
| int i; | |
| if (era) /* This is '0' prior to CAAM ERA-6 */ | |
| return era; | |
| for (i = 0; i < ARRAY_SIZE(caam_eras); i++) | |
| if (caam_eras[i].ip_id == ip_id && | |
| caam_eras[i].maj_rev == maj_rev) | |
| return caam_eras[i].era; | |
| return 0; | |
| } | |
| static void fdt_fixup_crypto_era(void *blob, u32 era) | |
| { | |
| int err; | |
| int crypto_node; | |
| crypto_node = fdt_path_offset(blob, "crypto"); | |
| if (crypto_node < 0) { | |
| printf("WARNING: Missing crypto node\n"); | |
| return; | |
| } | |
| err = fdt_setprop_u32(blob, crypto_node, "fsl,sec-era", era); | |
| if (err < 0) { | |
| printf("ERROR: could not set fsl,sec-era property: %s\n", | |
| fdt_strerror(err)); | |
| } | |
| } | |
| void fdt_fixup_crypto_node(void *blob, int sec_rev) | |
| { | |
| u8 era; | |
| if (!sec_rev) { | |
| fdt_del_node_and_alias(blob, "crypto"); | |
| return; | |
| } | |
| /* Add SEC ERA information in compatible */ | |
| era = caam_get_era(); | |
| if (era) { | |
| fdt_fixup_crypto_era(blob, era); | |
| } else { | |
| printf("WARNING: Unable to get ERA for CAAM rev: %d\n", | |
| sec_rev); | |
| } | |
| } | |
| #endif |