| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2003 | |
| * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de | |
| * | |
| * (C) Copyright 2002 | |
| * Rich Ireland, Enterasys Networks, rireland@enterasys.com. | |
| */ | |
| #define LOG_CATEGORY UCLASS_FPGA | |
| /* | |
| * Altera FPGA support | |
| */ | |
| #include <errno.h> | |
| #include <ACEX1K.h> | |
| #include <log.h> | |
| #include <stratixII.h> | |
| static const struct altera_fpga { | |
| enum altera_family family; | |
| const char *name; | |
| int (*load)(Altera_desc *, const void *, size_t); | |
| int (*dump)(Altera_desc *, const void *, size_t); | |
| int (*info)(Altera_desc *); | |
| } altera_fpga[] = { | |
| #if defined(CONFIG_FPGA_ACEX1K) | |
| { Altera_ACEX1K, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info }, | |
| { Altera_CYC2, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info }, | |
| #elif defined(CONFIG_FPGA_CYCLON2) | |
| { Altera_ACEX1K, "CycloneII", CYC2_load, CYC2_dump, CYC2_info }, | |
| { Altera_CYC2, "CycloneII", CYC2_load, CYC2_dump, CYC2_info }, | |
| #endif | |
| #if defined(CONFIG_FPGA_STRATIX_II) | |
| { Altera_StratixII, "StratixII", StratixII_load, | |
| StratixII_dump, StratixII_info }, | |
| #endif | |
| #if defined(CONFIG_FPGA_STRATIX_V) | |
| { Altera_StratixV, "StratixV", stratixv_load, NULL, NULL }, | |
| #endif | |
| #if defined(CONFIG_FPGA_SOCFPGA) | |
| { Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL }, | |
| #endif | |
| #if defined(CONFIG_FPGA_INTEL_SDM_MAILBOX) | |
| { Intel_FPGA_SDM_Mailbox, "Intel SDM Mailbox", intel_sdm_mb_load, NULL, | |
| NULL }, | |
| #endif | |
| }; | |
| static int altera_validate(Altera_desc *desc, const char *fn) | |
| { | |
| if (!desc) { | |
| printf("%s: NULL descriptor!\n", fn); | |
| return -EINVAL; | |
| } | |
| if ((desc->family < min_altera_type) || | |
| (desc->family > max_altera_type)) { | |
| printf("%s: Invalid family type, %d\n", fn, desc->family); | |
| return -EINVAL; | |
| } | |
| if ((desc->iface < min_altera_iface_type) || | |
| (desc->iface > max_altera_iface_type)) { | |
| printf("%s: Invalid Interface type, %d\n", fn, desc->iface); | |
| return -EINVAL; | |
| } | |
| if (!desc->size) { | |
| printf("%s: NULL part size\n", fn); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static const struct altera_fpga * | |
| altera_desc_to_fpga(Altera_desc *desc, const char *fn) | |
| { | |
| int i; | |
| if (altera_validate(desc, fn)) { | |
| printf("%s: Invalid device descriptor\n", fn); | |
| return NULL; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(altera_fpga); i++) { | |
| if (desc->family == altera_fpga[i].family) | |
| break; | |
| } | |
| if (i == ARRAY_SIZE(altera_fpga)) { | |
| printf("%s: Unsupported family type, %d\n", fn, desc->family); | |
| return NULL; | |
| } | |
| return &altera_fpga[i]; | |
| } | |
| int altera_load(Altera_desc *desc, const void *buf, size_t bsize) | |
| { | |
| const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__); | |
| if (!fpga) | |
| return FPGA_FAIL; | |
| log_debug("Launching the %s Loader...\n", fpga->name); | |
| if (fpga->load) | |
| return fpga->load(desc, buf, bsize); | |
| return 0; | |
| } | |
| int altera_dump(Altera_desc *desc, const void *buf, size_t bsize) | |
| { | |
| const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__); | |
| if (!fpga) | |
| return FPGA_FAIL; | |
| log_debug("Launching the %s Reader...\n", fpga->name); | |
| if (fpga->dump) | |
| return fpga->dump(desc, buf, bsize); | |
| return 0; | |
| } | |
| int altera_info(Altera_desc *desc) | |
| { | |
| const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__); | |
| if (!fpga) | |
| return FPGA_FAIL; | |
| printf("Family: \t%s\n", fpga->name); | |
| printf("Interface type:\t"); | |
| switch (desc->iface) { | |
| case passive_serial: | |
| printf("Passive Serial (PS)\n"); | |
| break; | |
| case passive_parallel_synchronous: | |
| printf("Passive Parallel Synchronous (PPS)\n"); | |
| break; | |
| case passive_parallel_asynchronous: | |
| printf("Passive Parallel Asynchronous (PPA)\n"); | |
| break; | |
| case passive_serial_asynchronous: | |
| printf("Passive Serial Asynchronous (PSA)\n"); | |
| break; | |
| case altera_jtag_mode: /* Not used */ | |
| printf("JTAG Mode\n"); | |
| break; | |
| case fast_passive_parallel: | |
| printf("Fast Passive Parallel (FPP)\n"); | |
| break; | |
| case fast_passive_parallel_security: | |
| printf("Fast Passive Parallel with Security (FPPS)\n"); | |
| break; | |
| case secure_device_manager_mailbox: | |
| puts("Secure Device Manager (SDM) Mailbox\n"); | |
| break; | |
| /* Add new interface types here */ | |
| default: | |
| printf("Unsupported interface type, %d\n", desc->iface); | |
| } | |
| printf("Device Size: \t%zd bytes\n" | |
| "Cookie: \t0x%x (%d)\n", | |
| desc->size, desc->cookie, desc->cookie); | |
| if (desc->iface_fns) { | |
| printf("Device Function Table @ 0x%p\n", desc->iface_fns); | |
| if (fpga->info) | |
| fpga->info(desc); | |
| } else { | |
| printf("No Device Function Table.\n"); | |
| } | |
| return FPGA_SUCCESS; | |
| } |