| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2013 | |
| * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc | |
| */ | |
| #include <i2c.h> | |
| #include <dm.h> | |
| #include <regmap.h> | |
| #include <log.h> | |
| #include <asm/global_data.h> | |
| #include <asm/unaligned.h> | |
| #include <linux/bitops.h> | |
| #include <linux/delay.h> | |
| struct ihs_i2c_priv { | |
| uint speed; | |
| struct regmap *map; | |
| }; | |
| struct ihs_i2c_regs { | |
| u16 interrupt_status; | |
| u16 interrupt_enable_control; | |
| u16 write_mailbox_ext; | |
| u16 write_mailbox; | |
| u16 read_mailbox_ext; | |
| u16 read_mailbox; | |
| }; | |
| #define ihs_i2c_set(map, member, val) \ | |
| regmap_set(map, struct ihs_i2c_regs, member, val) | |
| #define ihs_i2c_get(map, member, valp) \ | |
| regmap_get(map, struct ihs_i2c_regs, member, valp) | |
| enum { | |
| I2CINT_ERROR_EV = BIT(13), | |
| I2CINT_TRANSMIT_EV = BIT(14), | |
| I2CINT_RECEIVE_EV = BIT(15), | |
| }; | |
| enum { | |
| I2CMB_READ = 0 << 10, | |
| I2CMB_WRITE = 1 << 10, | |
| I2CMB_1BYTE = 0 << 11, | |
| I2CMB_2BYTE = 1 << 11, | |
| I2CMB_DONT_HOLD_BUS = 0 << 13, | |
| I2CMB_HOLD_BUS = 1 << 13, | |
| I2CMB_NATIVE = 2 << 14, | |
| }; | |
| enum { | |
| I2COP_WRITE = 0, | |
| I2COP_READ = 1, | |
| }; | |
| static int wait_for_int(struct udevice *dev, int read) | |
| { | |
| u16 val; | |
| uint ctr = 0; | |
| struct ihs_i2c_priv *priv = dev_get_priv(dev); | |
| ihs_i2c_get(priv->map, interrupt_status, &val); | |
| /* Wait until error or receive/transmit interrupt was raised */ | |
| while (!(val & (I2CINT_ERROR_EV | |
| | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { | |
| udelay(10); | |
| if (ctr++ > 5000) { | |
| debug("%s: timed out\n", __func__); | |
| return -ETIMEDOUT; | |
| } | |
| ihs_i2c_get(priv->map, interrupt_status, &val); | |
| } | |
| return (val & I2CINT_ERROR_EV) ? -EIO : 0; | |
| } | |
| static int ihs_i2c_transfer(struct udevice *dev, uchar chip, | |
| uchar *buffer, int len, int read, bool is_last) | |
| { | |
| u16 val; | |
| u16 data; | |
| int res; | |
| struct ihs_i2c_priv *priv = dev_get_priv(dev); | |
| /* Clear interrupt status */ | |
| data = I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV; | |
| ihs_i2c_set(priv->map, interrupt_status, data); | |
| ihs_i2c_get(priv->map, interrupt_status, &val); | |
| /* If we want to write and have data, write the bytes to the mailbox */ | |
| if (!read && len) { | |
| val = buffer[0]; | |
| if (len > 1) | |
| val |= buffer[1] << 8; | |
| ihs_i2c_set(priv->map, write_mailbox_ext, val); | |
| } | |
| data = I2CMB_NATIVE | |
| | (read ? 0 : I2CMB_WRITE) | |
| | (chip << 1) | |
| | ((len > 1) ? I2CMB_2BYTE : 0) | |
| | (is_last ? 0 : I2CMB_HOLD_BUS); | |
| ihs_i2c_set(priv->map, write_mailbox, data); | |
| res = wait_for_int(dev, read); | |
| if (res) { | |
| if (res == -ETIMEDOUT) | |
| debug("%s: time out while waiting for event\n", __func__); | |
| return res; | |
| } | |
| /* If we want to read, get the bytes from the mailbox */ | |
| if (read) { | |
| ihs_i2c_get(priv->map, read_mailbox_ext, &val); | |
| buffer[0] = val & 0xff; | |
| if (len > 1) | |
| buffer[1] = val >> 8; | |
| } | |
| return 0; | |
| } | |
| static int ihs_i2c_send_buffer(struct udevice *dev, uchar chip, u8 *data, int len, bool hold_bus, int read) | |
| { | |
| int res; | |
| while (len) { | |
| int transfer = min(len, 2); | |
| bool is_last = len <= transfer; | |
| res = ihs_i2c_transfer(dev, chip, data, transfer, read, | |
| hold_bus ? false : is_last); | |
| if (res) | |
| return res; | |
| data += transfer; | |
| len -= transfer; | |
| } | |
| return 0; | |
| } | |
| static int ihs_i2c_address(struct udevice *dev, uchar chip, u8 *addr, int alen, | |
| bool hold_bus) | |
| { | |
| return ihs_i2c_send_buffer(dev, chip, addr, alen, hold_bus, I2COP_WRITE); | |
| } | |
| static int ihs_i2c_access(struct udevice *dev, uchar chip, u8 *addr, | |
| int alen, uchar *buffer, int len, int read) | |
| { | |
| int res; | |
| /* Don't hold the bus if length of data to send/receive is zero */ | |
| if (len <= 0) | |
| return -EINVAL; | |
| res = ihs_i2c_address(dev, chip, addr, alen, len); | |
| if (res) | |
| return res; | |
| return ihs_i2c_send_buffer(dev, chip, buffer, len, false, read); | |
| } | |
| int ihs_i2c_probe(struct udevice *bus) | |
| { | |
| struct ihs_i2c_priv *priv = dev_get_priv(bus); | |
| regmap_init_mem(dev_ofnode(bus), &priv->map); | |
| return 0; | |
| } | |
| static int ihs_i2c_set_bus_speed(struct udevice *bus, uint speed) | |
| { | |
| struct ihs_i2c_priv *priv = dev_get_priv(bus); | |
| if (speed != priv->speed && priv->speed != 0) | |
| return -EINVAL; | |
| priv->speed = speed; | |
| return 0; | |
| } | |
| static int ihs_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) | |
| { | |
| struct i2c_msg *dmsg, *omsg, dummy; | |
| memset(&dummy, 0, sizeof(struct i2c_msg)); | |
| /* We expect either two messages (one with an offset and one with the | |
| * actual data) or one message (just data) | |
| */ | |
| if (nmsgs > 2 || nmsgs == 0) { | |
| debug("%s: Only one or two messages are supported\n", __func__); | |
| return -ENOTSUPP; | |
| } | |
| omsg = nmsgs == 1 ? &dummy : msg; | |
| dmsg = nmsgs == 1 ? msg : msg + 1; | |
| if (dmsg->flags & I2C_M_RD) | |
| return ihs_i2c_access(bus, dmsg->addr, omsg->buf, | |
| omsg->len, dmsg->buf, dmsg->len, | |
| I2COP_READ); | |
| else | |
| return ihs_i2c_access(bus, dmsg->addr, omsg->buf, | |
| omsg->len, dmsg->buf, dmsg->len, | |
| I2COP_WRITE); | |
| } | |
| static int ihs_i2c_probe_chip(struct udevice *bus, u32 chip_addr, | |
| u32 chip_flags) | |
| { | |
| uchar buffer[2]; | |
| int res; | |
| res = ihs_i2c_transfer(bus, chip_addr, buffer, 0, I2COP_READ, true); | |
| if (res) | |
| return res; | |
| return 0; | |
| } | |
| static const struct dm_i2c_ops ihs_i2c_ops = { | |
| .xfer = ihs_i2c_xfer, | |
| .probe_chip = ihs_i2c_probe_chip, | |
| .set_bus_speed = ihs_i2c_set_bus_speed, | |
| }; | |
| static const struct udevice_id ihs_i2c_ids[] = { | |
| { .compatible = "gdsys,ihs_i2cmaster", }, | |
| { /* sentinel */ } | |
| }; | |
| U_BOOT_DRIVER(i2c_ihs) = { | |
| .name = "i2c_ihs", | |
| .id = UCLASS_I2C, | |
| .of_match = ihs_i2c_ids, | |
| .probe = ihs_i2c_probe, | |
| .priv_auto = sizeof(struct ihs_i2c_priv), | |
| .ops = &ihs_i2c_ops, | |
| }; |