| source "drivers/net/phy/Kconfig" | |
| source "drivers/net/pfe_eth/Kconfig" | |
| source "drivers/net/fsl-mc/Kconfig" | |
| config ETH | |
| def_bool y | |
| config DM_ETH | |
| bool | |
| depends on DM | |
| help | |
| Enable driver model for Ethernet. | |
| The eth_*() interface will be implemented by the UCLASS_ETH class | |
| This is currently implemented in net/eth-uclass.c | |
| Look in include/net.h for details. | |
| config SPL_DM_ETH | |
| depends on SPL_NET | |
| def_bool y | |
| config DM_MDIO | |
| bool "Enable Driver Model for MDIO devices" | |
| depends on PHYLIB | |
| help | |
| Enable driver model for MDIO devices | |
| Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as | |
| stand-alone devices. Useful in particular for systems that support | |
| DM_ETH and have a stand-alone MDIO hardware block shared by multiple | |
| Ethernet interfaces. | |
| This is currently implemented in net/mdio-uclass.c | |
| Look in include/miiphy.h for details. | |
| config DM_MDIO_MUX | |
| bool "Enable Driver Model for MDIO MUX devices" | |
| depends on DM_MDIO | |
| help | |
| Enable driver model for MDIO MUX devices | |
| Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for | |
| systems that support DM_MDIO and integrate one or multiple muxes on | |
| the MDIO bus. | |
| This is currently implemented in net/mdio-mux-uclass.c | |
| Look in include/miiphy.h for details. | |
| config DM_DSA | |
| bool "Enable Driver Model for DSA switches" | |
| depends on DM_MDIO | |
| depends on PHY_FIXED | |
| help | |
| Enable driver model for DSA switches | |
| Adds UCLASS_DSA class supporting switches that follow the Distributed | |
| Switch Architecture (DSA). These switches rely on the presence of a | |
| management switch port connected to an Ethernet controller capable of | |
| receiving frames from the switch. This host Ethernet controller is | |
| called the "master" Ethernet interface in DSA terminology. | |
| This is currently implemented in net/dsa-uclass.c, refer to | |
| include/net/dsa.h for API details. | |
| config MDIO_SANDBOX | |
| depends on DM_MDIO && SANDBOX | |
| default y | |
| bool "Sandbox: Mocked MDIO driver" | |
| help | |
| This driver implements dummy read/write/reset MDIO functions mimicking | |
| a bus with a single PHY. | |
| This driver is used in for testing in test/dm/mdio.c | |
| config MDIO_MUX_SANDBOX | |
| depends on DM_MDIO_MUX && MDIO_SANDBOX | |
| default y | |
| bool "Sandbox: Mocked MDIO-MUX driver" | |
| help | |
| This driver implements dummy select/deselect ops mimicking a MUX on | |
| the MDIO bux. It uses mdio_sandbox driver as parent MDIO. | |
| This driver is used for testing in test/dm/mdio.c | |
| config DM_ETH_PHY | |
| bool "Enable Driver Model for Ethernet Generic PHY drivers" | |
| depends on DM | |
| help | |
| Enable driver model for Ethernet Generic PHY . | |
| config DSA_SANDBOX | |
| depends on DM_DSA && SANDBOX | |
| default y | |
| bool "Sandbox: Mocked DSA driver" | |
| help | |
| This driver implements a dummy DSA switch connected to a dummy sandbox | |
| Ethernet device used as DSA master, to test DSA class code, including | |
| exported DSA API and datapath processing of Ethernet traffic. | |
| menuconfig NETDEVICES | |
| bool "Network device support" | |
| depends on NET | |
| select DM_ETH | |
| help | |
| You must select Y to enable any network device support | |
| Generally if you have any networking support this is a given | |
| If unsure, say Y | |
| if NETDEVICES | |
| config PHY_GIGE | |
| bool "Enable GbE PHY status parsing and configuration" | |
| help | |
| Enables support for parsing the status output and for | |
| configuring GbE PHYs (affects the inner workings of some | |
| commands and miiphyutil.c). | |
| config AG7XXX | |
| bool "Atheros AG7xxx Ethernet MAC support" | |
| depends on ARCH_ATH79 | |
| select PHYLIB | |
| help | |
| This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is | |
| present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. | |
| config ALTERA_TSE | |
| bool "Altera Triple-Speed Ethernet MAC support" | |
| select PHYLIB | |
| help | |
| This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. | |
| Please find details on the "Triple-Speed Ethernet MegaCore Function | |
| Resource Center" of Altera. | |
| config BCM_SF2_ETH | |
| bool "Broadcom SF2 (Starfighter2) Ethernet support" | |
| select PHYLIB | |
| help | |
| This is an abstract framework which provides a generic interface | |
| to MAC and DMA management for multiple Broadcom SoCs such as | |
| Cygnus, NSP and bcm28155_ap platforms. | |
| config BCM_SF2_ETH_DEFAULT_PORT | |
| int "Broadcom SF2 (Starfighter2) Ethernet default port number" | |
| depends on BCM_SF2_ETH | |
| default 0 | |
| help | |
| Default port number for the Starfighter2 ethernet driver. | |
| config BCM_SF2_ETH_GMAC | |
| bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support" | |
| depends on BCM_SF2_ETH | |
| help | |
| This flag enables the ethernet support for Broadcom platforms with | |
| GMAC such as Cygnus. This driver is based on the framework provided | |
| by the BCM_SF2_ETH driver. | |
| Say Y to any bcmcygnus based platforms. | |
| config BCM6348_ETH | |
| bool "BCM6348 EMAC support" | |
| depends on ARCH_BMIPS | |
| select DMA | |
| select DMA_CHANNELS | |
| select MII | |
| select PHYLIB | |
| help | |
| This driver supports the BCM6348 Ethernet MAC. | |
| config BCM6368_ETH | |
| bool "BCM6368 EMAC support" | |
| depends on ARCH_BMIPS | |
| select DMA | |
| select MII | |
| help | |
| This driver supports the BCM6368 Ethernet MAC. | |
| config BCMGENET | |
| bool "BCMGENET V5 support" | |
| select PHYLIB | |
| help | |
| This driver supports the BCMGENET Ethernet MAC. | |
| source "drivers/net/bnxt/Kconfig" | |
| config CORTINA_NI_ENET | |
| bool "Cortina-Access Ethernet driver" | |
| depends on CORTINA_PLATFORM | |
| help | |
| This driver supports the Cortina-Access Ethernet MAC for | |
| all supported CAxxxx SoCs. | |
| config CALXEDA_XGMAC | |
| bool "Calxeda XGMAC support" | |
| help | |
| This driver supports the XGMAC in Calxeda Highbank and Midway | |
| machines. | |
| config DWC_ETH_XGMAC | |
| bool "Synopsys DWC Ethernet XGMAC device support" | |
| select PHYLIB | |
| help | |
| This driver supports the Synopsys Designware Ethernet XGMAC (10G | |
| Ethernet MAC) IP block. The IP supports many options for bus type, | |
| clocking/reset structure, and feature list. | |
| config DWC_ETH_XGMAC_SOCFPGA | |
| bool "Synopsys DWC Ethernet XGMAC device support for SOCFPGA" | |
| select REGMAP | |
| select SYSCON | |
| depends on DWC_ETH_XGMAC | |
| default y if TARGET_SOCFPGA_AGILEX5 | |
| help | |
| The Synopsys Designware Ethernet XGMAC IP block with specific | |
| configuration used in Intel SoC FPGA chip. | |
| config DRIVER_DM9000 | |
| bool "Davicom DM9000 controller driver" | |
| help | |
| The Davicom DM9000 parallel bus external ethernet interface chip. | |
| config DM9000_BYTE_SWAPPED | |
| bool "Byte swapped access for DM9000" | |
| depends on DRIVER_DM9000 | |
| config DM9000_NO_SROM | |
| bool "No SROM on DM9000" | |
| depends on DRIVER_DM9000 | |
| config DM9000_USE_16BIT | |
| bool "Use 16bit access in DM9000" | |
| depends on DRIVER_DM9000 | |
| config DWC_ETH_QOS | |
| bool "Synopsys DWC Ethernet QOS device support" | |
| select PHYLIB | |
| help | |
| This driver supports the Synopsys Designware Ethernet QOS (Quality | |
| Of Service) IP block. The IP supports many options for bus type, | |
| clocking/reset structure, and feature list. | |
| config DWC_ETH_QOS_IMX | |
| bool "Synopsys DWC Ethernet QOS device support for IMX" | |
| depends on DWC_ETH_QOS | |
| help | |
| The Synopsys Designware Ethernet QOS IP block with the specific | |
| configuration used in IMX soc. | |
| config DWC_ETH_QOS_ROCKCHIP | |
| bool "Synopsys DWC Ethernet QOS device support for Rockchip SoCs" | |
| depends on DWC_ETH_QOS | |
| select DM_ETH_PHY | |
| help | |
| The Synopsys Designware Ethernet QOS IP block with specific | |
| configuration used in Rockchip SoCs. | |
| config DWC_ETH_QOS_STM32 | |
| bool "Synopsys DWC Ethernet QOS device support for STM32" | |
| depends on DWC_ETH_QOS | |
| select DM_ETH_PHY | |
| default y if ARCH_STM32MP | |
| help | |
| The Synopsys Designware Ethernet QOS IP block with the specific | |
| configuration used in STM32MP soc. | |
| config DWC_ETH_QOS_TEGRA186 | |
| bool "Synopsys DWC Ethernet QOS device support for TEGRA186" | |
| depends on DWC_ETH_QOS | |
| default y if TEGRA186 | |
| help | |
| The Synopsys Designware Ethernet QOS IP block with specific | |
| configuration used in NVIDIA's Tegra186 chip. | |
| config DWC_ETH_QOS_QCOM | |
| bool "Synopsys DWC Ethernet QOS device support for Qcom SoCs" | |
| depends on DWC_ETH_QOS | |
| help | |
| The Synopsys Designware Ethernet QOS IP block with specific | |
| configuration used in Qcom QCS404 SoC. | |
| config DWC_ETH_QOS_STARFIVE | |
| bool "Synopsys DWC Ethernet QOS device support for STARFIVE" | |
| depends on DWC_ETH_QOS | |
| help | |
| The Synopsys Designware Ethernet QOS IP block with specific | |
| configuration used in STARFIVE JH7110 soc. | |
| config E1000 | |
| bool "Intel PRO/1000 Gigabit Ethernet support" | |
| depends on PCI | |
| help | |
| This driver supports Intel(R) PRO/1000 gigabit ethernet family of | |
| adapters. For more information on how to identify your adapter, go | |
| to the Adapter & Driver ID Guide at: | |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> | |
| config E1000_NO_NVM | |
| bool "Intel PRO/1000 has no NVMEM / EEPROM" | |
| depends on E1000 | |
| config E1000_SPI_GENERIC | |
| bool "Allow access to the Intel 8257x SPI bus" | |
| depends on E1000 | |
| help | |
| Allow generic access to the SPI bus on the Intel 8257x, for | |
| example with the "sspi" command. | |
| config E1000_SPI | |
| bool "Enable SPI bus utility code" | |
| depends on E1000 | |
| help | |
| Utility code for direct access to the SPI bus on Intel 8257x. | |
| This does not do anything useful unless you set at least one | |
| of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. | |
| config CMD_E1000 | |
| bool "Enable the e1000 command" | |
| depends on E1000 | |
| help | |
| This enables the 'e1000' management command for E1000 devices. When | |
| used on devices with SPI support you can reprogram the EEPROM from | |
| U-Boot. | |
| config EEPRO100 | |
| bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support" | |
| help | |
| This driver supports Intel(R) PRO/100 82557/82559/82559ER fast | |
| ethernet family of adapters. | |
| config ESSEDMA | |
| bool "Qualcomm ESS Edma support" | |
| depends on DM_ETH && ARCH_IPQ40XX | |
| select PHYLIB | |
| help | |
| This driver supports ethernet DMA adapter found in | |
| Qualcomm IPQ40xx series SoC-s. | |
| config ETH_SANDBOX | |
| depends on SANDBOX | |
| default y | |
| bool "Sandbox: Mocked Ethernet driver" | |
| help | |
| This driver simply responds with fake ARP replies and ping | |
| replies that are used to verify network stack functionality | |
| This driver is particularly useful in the test/dm/eth.c tests | |
| config ETH_SANDBOX_RAW | |
| depends on SANDBOX | |
| default y | |
| bool "Sandbox: Bridge to Linux Raw Sockets" | |
| help | |
| This driver is a bridge from the bottom of the network stack | |
| in U-Boot to the RAW AF_PACKET API in Linux. This allows real | |
| network traffic to be tested from within sandbox. See | |
| doc/arch/index.rst for more details. | |
| config ETH_DESIGNWARE | |
| bool "Synopsys Designware Ethernet MAC" | |
| select PHYLIB | |
| imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA | |
| help | |
| This MAC is present in SoCs from various vendors. It supports | |
| 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to | |
| provide the PHY (physical media interface). | |
| config ETH_DESIGNWARE_MESON8B | |
| bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC" | |
| select ETH_DESIGNWARE | |
| help | |
| This provides glue layer to use Synopsys Designware Ethernet MAC | |
| present on the Amlogic Meson8b, GX, AXG & G12A SoCs. | |
| config ETH_DESIGNWARE_SOCFPGA | |
| select REGMAP | |
| select SYSCON | |
| select DW_ALTDESCRIPTOR | |
| bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC" | |
| depends on ETH_DESIGNWARE | |
| help | |
| The Altera SoCFPGA requires additional configuration of the | |
| Altera system manager to correctly interface with the PHY. | |
| This code handles those SoC specifics. | |
| config ETH_DESIGNWARE_S700 | |
| bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC" | |
| depends on ETH_DESIGNWARE | |
| help | |
| This provides glue layer to use Synopsys Designware Ethernet MAC | |
| present on Actions S700 SoC. | |
| config DW_ALTDESCRIPTOR | |
| bool "Designware Ethernet MAC uses alternate (enhanced) descriptors" | |
| depends on ETH_DESIGNWARE | |
| config ETHOC | |
| bool "OpenCores 10/100 Mbps Ethernet MAC" | |
| help | |
| This MAC is present in OpenRISC and Xtensa XTFPGA boards. | |
| config FEC_MXC_SHARE_MDIO | |
| bool "Share the MDIO bus for FEC controller" | |
| depends on FEC_MXC | |
| config FEC_MXC_MDIO_BASE | |
| hex "MDIO base address for the FEC controller" | |
| depends on FEC_MXC_SHARE_MDIO | |
| help | |
| This specifies the MDIO registers base address. It is used when | |
| two FEC controllers share MDIO bus. | |
| config FEC_MXC | |
| bool "FEC Ethernet controller" | |
| depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX93 || VF610 | |
| help | |
| This driver supports the 10/100 Fast Ethernet controller for | |
| NXP i.MX processors. | |
| config FMAN_ENET | |
| bool "Freescale FMan ethernet support" | |
| depends on ARM || PPC | |
| select SYS_FMAN_V3 if ARCH_B4420 || ARCH_B4860 || ARCH_LS1043A || \ | |
| ARCH_LS1046A || ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || \ | |
| ARCH_T2080 || ARCH_T4240 | |
| select FSL_FM_10GEC_REGULAR_NOTATION if ARCH_T1024 | |
| help | |
| This driver support the Freescale FMan Ethernet controller | |
| config SYS_FMAN_FW_ADDR | |
| hex "FMAN Firmware Address" | |
| depends on FMAN_ENET | |
| default 0x0 | |
| config SYS_QE_FMAN_FW_LENGTH | |
| hex "FMAN QE Firmware length" | |
| depends on FMAN_ENET || QE || U_QE | |
| default 0x10000 | |
| config SYS_FMAN_V3 | |
| bool | |
| select FSL_MEMAC | |
| help | |
| SoC has FMan v3 with mEMAC | |
| config FSL_FM_10GEC_REGULAR_NOTATION | |
| bool | |
| help | |
| On SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and | |
| MAC as below: | |
| 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 | |
| While on SoCs T1024, etc, the notation between 10GEC and MAC as below: | |
| 10GEC1->MAC1, 10GEC2->MAC2 | |
| so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the | |
| new SoCs on which 10GEC enumeration is consistent with MAC | |
| enumeration. | |
| config FTMAC100 | |
| bool "Ftmac100 Ethernet Support" | |
| select MII | |
| help | |
| This MAC is present in Andestech SoCs. | |
| config FTGMAC100 | |
| bool "Ftgmac100 Ethernet Support" | |
| select PHYLIB | |
| help | |
| This driver supports the Faraday's FTGMAC100 Gigabit SoC | |
| Ethernet controller that can be found on Aspeed SoCs (which | |
| include NCSI). | |
| It is fully compliant with IEEE 802.3 specification for | |
| 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000 | |
| Mbps Ethernet and includes Reduced Media Independent | |
| Interface (RMII) and Reduced Gigabit Media Independent | |
| Interface (RGMII) interfaces. It adopts an AHB bus interface | |
| and integrates a link list DMA engine with direct M-Bus | |
| accesses for transmitting and receiving packets. It has | |
| independent TX/RX fifos, supports half and full duplex (1000 | |
| Mbps mode only supports full duplex), flow control for full | |
| duplex and backpressure for half duplex. | |
| The FTGMAC100 also implements IP, TCP, UDP checksum offloads | |
| and supports IEEE 802.1Q VLAN tag insertion and removal. It | |
| offers high-priority transmit queue for QoS and CoS | |
| applications. | |
| config SYS_DISCOVER_PHY | |
| bool | |
| config MCFFEC | |
| bool "ColdFire Ethernet Support" | |
| select PHYLIB | |
| select SYS_DISCOVER_PHY | |
| help | |
| This driver supports the network interface units in the | |
| ColdFire family. | |
| config SYS_UNIFY_CACHE | |
| depends on MCFFEC | |
| bool "Invalidate icache during ethernet operations" | |
| config KS8851_MLL | |
| bool "Microchip KS8851-MLL controller driver" | |
| help | |
| The Microchip KS8851 parallel bus external ethernet interface chip. | |
| config KSZ9477 | |
| bool "Microchip KSZ9477 I2C controller driver" | |
| depends on DM_DSA && DM_I2C | |
| help | |
| This driver implements a DSA switch driver for the KSZ9477 family | |
| of GbE switches using the I2C interface. | |
| config LITEETH | |
| bool "LiteX LiteEth Ethernet MAC" | |
| help | |
| Driver for the LiteEth Ethernet MAC from LiteX. | |
| config MV88E6XXX | |
| bool "Marvell MV88E6xxx Ethernet switch DSA driver" | |
| depends on DM_DSA && DM_MDIO | |
| help | |
| This driver implements a DSA switch driver for the MV88E6xxx family | |
| of Ethernet switches using the MDIO interface | |
| config MVGBE | |
| bool "Marvell Orion5x/Kirkwood network interface support" | |
| depends on ARCH_KIRKWOOD || ARCH_ORION5X | |
| select PHYLIB | |
| help | |
| This driver supports the network interface units in the | |
| Marvell Orion5x and Kirkwood SoCs | |
| config MVNETA | |
| bool "Marvell Armada XP/385/3700 network interface support" | |
| depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5 | |
| select PHYLIB | |
| select DM_MDIO | |
| help | |
| This driver supports the network interface units in the | |
| Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs | |
| config MVPP2 | |
| bool "Marvell Armada 375/7K/8K network interface support" | |
| depends on ARMADA_375 || ARMADA_8K | |
| select PHYLIB | |
| select MVMDIO | |
| select DM_MDIO | |
| help | |
| This driver supports the network interface units in the | |
| Marvell ARMADA 375, 7K and 8K SoCs. | |
| config MACB | |
| bool "Cadence MACB/GEM Ethernet Interface" | |
| select PHYLIB | |
| help | |
| The Cadence MACB ethernet interface is found on many Atmel | |
| AT91 and SAMA5 parts. This driver also supports the Cadence | |
| GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. | |
| Say Y to include support for the MACB/GEM chip. | |
| config MACB_ZYNQ | |
| bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq" | |
| depends on MACB | |
| help | |
| The Cadence MACB ethernet interface was used on Zynq platform. | |
| Say Y to enable support for the MACB/GEM in Zynq chip. | |
| config MT7620_ETH | |
| bool "MediaTek MT7620 Ethernet Interface" | |
| depends on SOC_MT7620 | |
| select PHYLIB | |
| select DM_RESET | |
| select DM_GPIO | |
| select CLK | |
| help | |
| The MediaTek MT7620 ethernet interface is used on MT7620 based | |
| boards. It has a built-in switch with two configurable ports which | |
| can connect to external PHY/MACs. | |
| config MT7628_ETH | |
| bool "MediaTek MT7628 Ethernet Interface" | |
| depends on SOC_MT7628 | |
| select PHYLIB | |
| help | |
| The MediaTek MT7628 ethernet interface is used on MT7628 and | |
| MT7688 based boards. | |
| config NET_NPCM750 | |
| bool "Nuvoton NPCM750 Ethernet MAC" | |
| help | |
| support NPCM750 EMAC | |
| config NET_OCTEON | |
| bool "MIPS Octeon ethernet support" | |
| depends on ARCH_OCTEON | |
| help | |
| You must select Y to enable network device support for | |
| MIPS Octeon SoCs. If unsure, say n | |
| config NET_OCTEONTX | |
| bool "OcteonTX Ethernet support" | |
| depends on ARCH_OCTEONTX | |
| depends on PCI_SRIOV | |
| help | |
| You must select Y to enable network device support for | |
| OcteonTX SoCs. If unsure, say n | |
| config NET_OCTEONTX2 | |
| bool "OcteonTX2 Ethernet support" | |
| depends on ARCH_OCTEONTX2 | |
| select OCTEONTX2_CGX_INTF | |
| help | |
| You must select Y to enable network device support for | |
| OcteonTX2 SoCs. If unsure, say n | |
| config OCTEONTX_SMI | |
| bool "OcteonTX SMI Device support" | |
| depends on ARCH_OCTEONTX || ARCH_OCTEONTX2 | |
| help | |
| You must select Y to enable SMI controller support for | |
| OcteonTX or OcteonTX2 SoCs. If unsure, say n | |
| config OCTEONTX2_CGX_INTF | |
| bool "OcteonTX2 CGX ATF interface support" | |
| depends on ARCH_OCTEONTX2 | |
| default y if ARCH_OCTEONTX2 | |
| help | |
| You must select Y to enable CGX ATF interface support for | |
| OcteonTX2 SoCs. If unsure, say n | |
| config PCH_GBE | |
| bool "Intel Platform Controller Hub EG20T GMAC driver" | |
| select PHYLIB | |
| help | |
| This MAC is present in Intel Platform Controller Hub EG20T. It | |
| supports 10/100/1000 Mbps operation. | |
| config RGMII | |
| bool "Enable RGMII" | |
| help | |
| Enable the support of the Reduced Gigabit Media-Independent | |
| Interface (RGMII). | |
| config MII | |
| bool "Enable MII" | |
| help | |
| Enable support of the Media-Independent Interface (MII) | |
| config RMII | |
| bool "Enable RMII" | |
| help | |
| Enable support of the Reduced Media-Independent Interface (MII) | |
| config PCNET | |
| bool "AMD PCnet series Ethernet controller driver" | |
| help | |
| This driver supports AMD PCnet series fast ethernet family of | |
| PCI chipsets/adapters. | |
| source "drivers/net/qe/Kconfig" | |
| config RTL8139 | |
| bool "Realtek 8139 series Ethernet controller driver" | |
| help | |
| This driver supports Realtek 8139 series fast ethernet family of | |
| PCI chipsets/adapters. | |
| config RTL8169 | |
| bool "Realtek 8169 series Ethernet controller driver" | |
| depends on PCI | |
| help | |
| This driver supports Realtek 8169 series gigabit ethernet family of | |
| PCI/PCIe chipsets/adapters. | |
| config SJA1105 | |
| bool "NXP SJA1105 Ethernet switch family driver" | |
| depends on DM_DSA && DM_SPI | |
| select BITREVERSE | |
| help | |
| This is the driver for the NXP SJA1105 automotive Ethernet switch | |
| family. These are 5-port devices and are managed over an SPI | |
| interface. Probing is handled based on OF bindings. The driver | |
| supports the following revisions: | |
| - SJA1105E (Gen. 1, No TT-Ethernet) | |
| - SJA1105T (Gen. 1, TT-Ethernet) | |
| - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet) | |
| - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) | |
| - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) | |
| - SJA1105S (Gen. 2, SGMII, TT-Ethernet) | |
| config SMC911X | |
| bool "SMSC LAN911x and LAN921x controller driver" | |
| config SMC911X_32_BIT | |
| bool "Enable SMC911X 32-bit interface" | |
| depends on SMC911X | |
| help | |
| Define this if data bus is 32 bits. If your processor use a | |
| narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit | |
| words, leave this to "n". | |
| config SUN7I_GMAC | |
| bool "Enable Allwinner GMAC Ethernet support" | |
| help | |
| Enable the support for Sun7i GMAC Ethernet controller | |
| config SUN7I_GMAC_FORCE_TXERR | |
| bool "Force PA17 as gmac function" | |
| depends on SUN7I_GMAC | |
| help | |
| Some ethernet phys needs TXERR control. Since the GMAC | |
| doesn't have such signal, setting PA17 as GMAC function | |
| makes the pin output low, which enables data transmission. | |
| config SUN4I_EMAC | |
| bool "Allwinner Sun4i Ethernet MAC support" | |
| select PHYLIB | |
| help | |
| This driver supports the Allwinner based SUN4I Ethernet MAC. | |
| config SUN8I_EMAC | |
| bool "Allwinner Sun8i Ethernet MAC support" | |
| select PHYLIB | |
| select PHY_GIGE | |
| help | |
| This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. | |
| It can be found in H3/A64/A83T based SoCs and compatible with both | |
| External and Internal PHYs. | |
| config SH_ETHER | |
| bool "Renesas SH Ethernet MAC" | |
| select PHYLIB | |
| select PHY_ETHERNET_ID | |
| help | |
| This driver supports the Ethernet for Renesas SH and ARM SoCs. | |
| source "drivers/net/ti/Kconfig" | |
| config TULIP | |
| bool "DEC Tulip DC2114x Ethernet support" | |
| help | |
| This driver supports DEC DC2114x Fast ethernet chips. | |
| config XILINX_AXIEMAC | |
| select PHYLIB | |
| select MII | |
| bool "Xilinx AXI Ethernet" | |
| help | |
| This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. | |
| config XILINX_AXIMRMAC | |
| depends on ARCH_VERSAL | |
| bool "Xilinx AXI MRMAC" | |
| help | |
| MRMAC is a high performance, low latency, adaptable Ethernet | |
| integrated hard IP. This can be configured up to four ports with MAC | |
| rates from 10GE to 100GE. This could be present in some of the Xilinx | |
| Versal designs. | |
| config VSC7385_ENET | |
| bool "Vitesse 7385 Switch Firmware Upload driver" | |
| config XILINX_EMACLITE | |
| select PHYLIB | |
| select MII | |
| bool "Xilinx Ethernetlite" | |
| help | |
| This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. | |
| config ZYNQ_GEM | |
| select PHYLIB | |
| bool "Xilinx Ethernet GEM" | |
| help | |
| This MAC is present in Xilinx Zynq and ZynqMP SoCs. | |
| config PIC32_ETH | |
| bool "Microchip PIC32 Ethernet Support" | |
| depends on MACH_PIC32 | |
| select PHYLIB | |
| help | |
| This driver implements 10/100 Mbps Ethernet and MAC layer for | |
| Microchip PIC32 microcontrollers. | |
| config GMAC_ROCKCHIP | |
| bool "Rockchip Synopsys Designware Ethernet MAC" | |
| depends on ETH_DESIGNWARE | |
| help | |
| This driver provides Rockchip SoCs network support based on the | |
| Synopsys Designware driver. | |
| config RENESAS_ETHER_SWITCH | |
| bool "Renesas Ethernet Switch support" | |
| depends on DM_ETH && R8A779F0 | |
| select PHYLIB | |
| help | |
| This driver implements support for the Renesas Ethernet Switch | |
| which is available on R-Car S4 SoC (r8a779f0). | |
| config RENESAS_RAVB | |
| bool "Renesas Ethernet AVB MAC" | |
| depends on RCAR_64 | |
| select PHYLIB | |
| select PHY_ETHERNET_ID | |
| help | |
| This driver implements support for the Ethernet AVB block in | |
| Renesas M3 and H3 SoCs. | |
| config MPC8XX_FEC | |
| bool "Fast Ethernet Controller on MPC8XX" | |
| depends on MPC8xx | |
| select MII | |
| select SYS_DISCOVER_PHY | |
| help | |
| This driver implements support for the Fast Ethernet Controller | |
| on MPC8XX | |
| config SNI_AVE | |
| bool "Socionext AVE Ethernet support" | |
| depends on ARCH_UNIPHIER | |
| select PHYLIB | |
| select SYSCON | |
| select REGMAP | |
| help | |
| This driver implements support for the Socionext AVE Ethernet | |
| controller, as found on the Socionext UniPhier family. | |
| config SNI_NETSEC | |
| bool "Socionext NETSEC Ethernet support" | |
| depends on SYNQUACER_SPI | |
| select PHYLIB | |
| help | |
| This driver implements support for the Socionext SynQuacer NETSEC | |
| ethernet controller, as found on the Socionext SynQuacer family. | |
| source "drivers/net/mscc_eswitch/Kconfig" | |
| config ETHER_ON_FEC1 | |
| bool "FEC1" | |
| depends on MPC8XX_FEC | |
| default y | |
| config FEC1_PHY | |
| int "FEC1 PHY" | |
| depends on ETHER_ON_FEC1 | |
| default -1 | |
| help | |
| Define to the hardcoded PHY address which corresponds | |
| to the given FEC; i. e. | |
| #define CONFIG_FEC1_PHY 4 | |
| means that the PHY with address 4 is connected to FEC1 | |
| When set to -1, means to probe for first available. | |
| config PHY_NORXERR | |
| bool "PHY_NORXERR" | |
| depends on ETHER_ON_FEC1 | |
| help | |
| The PHY does not have a RXERR line (RMII only). | |
| (so program the FEC to ignore it). | |
| config ETHER_ON_FEC2 | |
| bool "FEC2" | |
| depends on MPC8XX_FEC && MPC885 | |
| default y | |
| config FEC2_PHY | |
| int "FEC2 PHY" | |
| depends on ETHER_ON_FEC2 | |
| default -1 | |
| help | |
| Define to the hardcoded PHY address which corresponds | |
| to the given FEC; i. e. | |
| #define CONFIG_FEC1_PHY 4 | |
| means that the PHY with address 4 is connected to FEC1 | |
| When set to -1, means to probe for first available. | |
| config FEC2_PHY_NORXERR | |
| bool "PHY_NORXERR" | |
| depends on ETHER_ON_FEC2 | |
| help | |
| The PHY does not have a RXERR line (RMII only). | |
| (so program the FEC to ignore it). | |
| config SYS_DPAA_QBMAN | |
| bool "Device tree fixup for QBMan on freescale SOCs" | |
| depends on (ARM || PPC) && !SPL_BUILD | |
| default y if ARCH_B4860 || \ | |
| ARCH_B4420 || \ | |
| ARCH_P1023 || \ | |
| ARCH_P2041 || \ | |
| ARCH_T1024 || \ | |
| ARCH_T1040 || \ | |
| ARCH_T1042 || \ | |
| ARCH_T2080 || \ | |
| ARCH_T4240 || \ | |
| ARCH_P4080 || \ | |
| ARCH_P3041 || \ | |
| ARCH_P5040 || \ | |
| ARCH_LS1043A || \ | |
| ARCH_LS1046A | |
| help | |
| QBman fixups to allow deep sleep in DPAA 1 SOCs | |
| config SYS_FSL_QMAN_V3 | |
| bool # QMAN version 3 | |
| depends on SYS_DPAA_QBMAN | |
| config TSEC_ENET | |
| select PHYLIB | |
| bool "Enable Three-Speed Ethernet Controller" | |
| help | |
| This driver implements support for the (Enhanced) Three-Speed | |
| Ethernet Controller found on Freescale SoCs. | |
| config MEDIATEK_ETH | |
| bool "MediaTek Ethernet GMAC Driver" | |
| select PHYLIB | |
| select DM_GPIO | |
| select DM_RESET | |
| help | |
| This Driver support MediaTek Ethernet GMAC | |
| Say Y to enable support for the MediaTek Ethernet GMAC. | |
| config HIFEMAC_ETH | |
| bool "HiSilicon Fast Ethernet Controller" | |
| select DM_CLK | |
| select DM_RESET | |
| select PHYLIB | |
| help | |
| This driver supports HIFEMAC Ethernet controller found on | |
| HiSilicon SoCs. | |
| config HIFEMAC_MDIO | |
| bool "HiSilicon Fast Ethernet Controller MDIO interface" | |
| depends on DM_MDIO | |
| select DM_CLK | |
| help | |
| This driver supports the internal MDIO interface of HIFEMAC | |
| Ethernet controller. | |
| config HIGMACV300_ETH | |
| bool "HiSilicon Gigabit Ethernet Controller" | |
| select DM_RESET | |
| select PHYLIB | |
| help | |
| This driver supports HIGMACV300 Ethernet controller found on | |
| HiSilicon SoCs. | |
| config FSL_ENETC | |
| bool "NXP ENETC Ethernet controller" | |
| depends on DM_MDIO | |
| help | |
| This driver supports the NXP ENETC Ethernet controller found on some | |
| of the NXP SoCs. | |
| config MDIO_MUX_I2CREG | |
| bool "MDIO MUX accessed as a register over I2C" | |
| depends on DM_MDIO_MUX && DM_I2C | |
| help | |
| This driver is used for MDIO muxes driven by writing to a register of | |
| an I2C chip. The board it was developed for uses a mux controlled by | |
| on-board FPGA which in turn is accessed as a chip over I2C. | |
| config MDIO_IPQ4019 | |
| bool "Qualcomm IPQ4019 MDIO interface support" | |
| depends on DM_MDIO | |
| help | |
| This driver supports the MDIO interface found in Qualcomm | |
| IPQ40xx series Soc-s. | |
| config MVMDIO | |
| bool "Marvell MDIO interface support" | |
| depends on DM_MDIO | |
| help | |
| This driver supports the MDIO interface found in the network | |
| interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, | |
| Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP). | |
| This driver is used by the MVPP2 and MVNETA drivers. | |
| config FSL_LS_MDIO | |
| bool "NXP Layerscape MDIO interface support" | |
| depends on DM_MDIO | |
| help | |
| This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and | |
| on the mEMAC (which supports both Clauses 22 and 45). | |
| config ASPEED_MDIO | |
| bool "Aspeed MDIO interface support" | |
| depends on DM_MDIO | |
| help | |
| This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver | |
| currently supports Clause 22. | |
| config MDIO_MUX_MMIOREG | |
| bool "MDIO MUX accessed as a MMIO register access" | |
| depends on DM_MDIO_MUX | |
| help | |
| This driver is used for MDIO muxes driven by writing to a register in | |
| the MMIO physical memory. | |
| config MDIO_MUX_MESON_G12A | |
| bool "MDIO MUX for Amlogic Meson G12A SoCs" | |
| depends on DM_MDIO_MUX | |
| help | |
| This driver is used for the MDIO mux found on the Amlogic G12A & compatible | |
| SoCs. | |
| config MDIO_MUX_MESON_GXL | |
| bool "MDIO MUX for Amlogic Meson GXL SoCs" | |
| depends on DM_MDIO_MUX | |
| help | |
| This driver is used for the MDIO mux found on the Amlogic GXL & compatible | |
| SoCs. | |
| endif # NETDEVICES |