| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright 2009-2010, 2013 Freescale Semiconductor, Inc. | |
| * Jun-jie Zhang <b18070@freescale.com> | |
| * Mingkai Hu <Mingkai.hu@freescale.com> | |
| */ | |
| #include <miiphy.h> | |
| #include <phy.h> | |
| #include <fsl_mdio.h> | |
| #include <asm/io.h> | |
| #include <linux/errno.h> | |
| #include <tsec.h> | |
| #ifdef CONFIG_DM_MDIO | |
| struct tsec_mdio_priv { | |
| struct tsec_mii_mng __iomem *regs; | |
| }; | |
| #endif | |
| void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, | |
| int dev_addr, int regnum, int value) | |
| { | |
| int timeout = 1000000; | |
| out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); | |
| out_be32(&phyregs->miimcon, value); | |
| /* Memory barrier */ | |
| mb(); | |
| while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--) | |
| ; | |
| } | |
| int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, | |
| int dev_addr, int regnum) | |
| { | |
| int value; | |
| int timeout = 1000000; | |
| /* Put the address of the phy, and the register number into MIIMADD */ | |
| out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); | |
| /* Clear the command register, and wait */ | |
| out_be32(&phyregs->miimcom, 0); | |
| /* Memory barrier */ | |
| mb(); | |
| /* Initiate a read command, and wait */ | |
| out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE); | |
| /* Memory barrier */ | |
| mb(); | |
| /* Wait for the the indication that the read is done */ | |
| while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) | |
| && timeout--) | |
| ; | |
| /* Grab the value read from the PHY */ | |
| value = in_be32(&phyregs->miimstat); | |
| return value; | |
| } | |
| #if defined(CONFIG_PHYLIB) | |
| static int fsl_pq_mdio_reset(struct mii_dev *bus) | |
| { | |
| struct tsec_mii_mng __iomem *regs; | |
| #ifndef CONFIG_DM_MDIO | |
| regs = (struct tsec_mii_mng __iomem *)bus->priv; | |
| #else | |
| struct tsec_mdio_priv *priv; | |
| if (!bus->priv) | |
| return -EINVAL; | |
| priv = dev_get_priv(bus->priv); | |
| regs = priv->regs; | |
| #endif | |
| /* Reset MII (due to new addresses) */ | |
| out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); | |
| out_be32(®s->miimcfg, MIIMCFG_INIT_VALUE); | |
| while (in_be32(®s->miimind) & MIIMIND_BUSY) | |
| ; | |
| return 0; | |
| } | |
| #endif | |
| int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) | |
| { | |
| struct tsec_mii_mng __iomem *phyregs; | |
| #ifndef CONFIG_DM_MDIO | |
| phyregs = (struct tsec_mii_mng __iomem *)bus->priv; | |
| #else | |
| struct tsec_mdio_priv *priv; | |
| if (!bus->priv) | |
| return -EINVAL; | |
| priv = dev_get_priv(bus->priv); | |
| phyregs = priv->regs; | |
| #endif | |
| return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum); | |
| } | |
| int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, | |
| u16 value) | |
| { | |
| struct tsec_mii_mng __iomem *phyregs; | |
| #ifndef CONFIG_DM_MDIO | |
| phyregs = (struct tsec_mii_mng __iomem *)bus->priv; | |
| #else | |
| struct tsec_mdio_priv *priv; | |
| if (!bus->priv) | |
| return -EINVAL; | |
| priv = dev_get_priv(bus->priv); | |
| phyregs = priv->regs; | |
| #endif | |
| tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value); | |
| return 0; | |
| } | |
| #ifndef CONFIG_DM_MDIO | |
| int fsl_pq_mdio_init(struct bd_info *bis, struct fsl_pq_mdio_info *info) | |
| { | |
| struct mii_dev *bus = mdio_alloc(); | |
| if (!bus) { | |
| printf("Failed to allocate FSL MDIO bus\n"); | |
| return -1; | |
| } | |
| bus->read = tsec_phy_read; | |
| bus->write = tsec_phy_write; | |
| bus->reset = fsl_pq_mdio_reset; | |
| strcpy(bus->name, info->name); | |
| bus->priv = (void *)info->regs; | |
| return mdio_register(bus); | |
| } | |
| #else /* CONFIG_DM_MDIO */ | |
| #if defined(CONFIG_PHYLIB) | |
| static int tsec_mdio_read(struct udevice *dev, int addr, int devad, int reg) | |
| { | |
| struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : | |
| NULL; | |
| if (pdata && pdata->mii_bus) | |
| return tsec_phy_read(pdata->mii_bus, addr, devad, reg); | |
| return -1; | |
| } | |
| static int tsec_mdio_write(struct udevice *dev, int addr, int devad, int reg, | |
| u16 val) | |
| { | |
| struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : | |
| NULL; | |
| if (pdata && pdata->mii_bus) | |
| return tsec_phy_write(pdata->mii_bus, addr, devad, reg, val); | |
| return -1; | |
| } | |
| static int tsec_mdio_reset(struct udevice *dev) | |
| { | |
| struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : | |
| NULL; | |
| if (pdata && pdata->mii_bus) | |
| return fsl_pq_mdio_reset(pdata->mii_bus); | |
| return -1; | |
| } | |
| static const struct mdio_ops tsec_mdio_ops = { | |
| .read = tsec_mdio_read, | |
| .write = tsec_mdio_write, | |
| .reset = tsec_mdio_reset, | |
| }; | |
| static struct fsl_pq_mdio_data etsec2_data = { | |
| .mdio_regs_off = TSEC_MDIO_REGS_OFFSET, | |
| }; | |
| static struct fsl_pq_mdio_data gianfar_data = { | |
| .mdio_regs_off = 0x0, | |
| }; | |
| static struct fsl_pq_mdio_data fman_data = { | |
| .mdio_regs_off = 0x0, | |
| }; | |
| static const struct udevice_id tsec_mdio_ids[] = { | |
| { .compatible = "fsl,gianfar-tbi", .data = (ulong)&gianfar_data }, | |
| { .compatible = "fsl,gianfar-mdio", .data = (ulong)&gianfar_data }, | |
| { .compatible = "fsl,etsec2-tbi", .data = (ulong)&etsec2_data }, | |
| { .compatible = "fsl,etsec2-mdio", .data = (ulong)&etsec2_data }, | |
| { .compatible = "fsl,fman-mdio", .data = (ulong)&fman_data }, | |
| {} | |
| }; | |
| static int tsec_mdio_probe(struct udevice *dev) | |
| { | |
| struct fsl_pq_mdio_data *data; | |
| struct tsec_mdio_priv *priv = (dev) ? dev_get_priv(dev) : NULL; | |
| struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) : | |
| NULL; | |
| if (!dev) { | |
| printf("%s dev = NULL\n", __func__); | |
| return -1; | |
| } | |
| if (!priv) { | |
| printf("dev_get_priv(dev %p) = NULL\n", dev); | |
| return -1; | |
| } | |
| data = (struct fsl_pq_mdio_data *)dev_get_driver_data(dev); | |
| priv->regs = dev_remap_addr(dev) + data->mdio_regs_off; | |
| debug("%s priv %p @ regs %p, pdata %p\n", __func__, | |
| priv, priv->regs, pdata); | |
| return 0; | |
| } | |
| static int tsec_mdio_remove(struct udevice *dev) | |
| { | |
| return 0; | |
| } | |
| U_BOOT_DRIVER(tsec_mdio) = { | |
| .name = "tsec_mdio", | |
| .id = UCLASS_MDIO, | |
| .of_match = tsec_mdio_ids, | |
| .probe = tsec_mdio_probe, | |
| .remove = tsec_mdio_remove, | |
| .ops = &tsec_mdio_ops, | |
| .priv_auto = sizeof(struct tsec_mdio_priv), | |
| .plat_auto = sizeof(struct mdio_perdev_priv), | |
| }; | |
| #endif /* CONFIG_PHYLIB */ | |
| #endif /* CONFIG_DM_MDIO */ |