| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * QE UEC ethernet controller driver | |
| * | |
| * based on drivers/qe/uec.c from NXP | |
| * | |
| * Copyright (C) 2020 Heiko Schocher <hs@denx.de> | |
| */ | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <memalign.h> | |
| #include <miiphy.h> | |
| #include <asm/global_data.h> | |
| #include <asm/io.h> | |
| #include "dm_qe_uec.h" | |
| #define QE_UEC_DRIVER_NAME "ucc_geth" | |
| /* Default UTBIPAR SMI address */ | |
| #ifndef CFG_UTBIPAR_INIT_TBIPA | |
| #define CFG_UTBIPAR_INIT_TBIPA 0x1F | |
| #endif | |
| static int uec_mac_enable(struct uec_priv *uec, comm_dir_e mode) | |
| { | |
| uec_t *uec_regs; | |
| u32 maccfg1; | |
| uec_regs = uec->uec_regs; | |
| maccfg1 = in_be32(&uec_regs->maccfg1); | |
| if (mode & COMM_DIR_TX) { | |
| maccfg1 |= MACCFG1_ENABLE_TX; | |
| out_be32(&uec_regs->maccfg1, maccfg1); | |
| uec->mac_tx_enabled = 1; | |
| } | |
| if (mode & COMM_DIR_RX) { | |
| maccfg1 |= MACCFG1_ENABLE_RX; | |
| out_be32(&uec_regs->maccfg1, maccfg1); | |
| uec->mac_rx_enabled = 1; | |
| } | |
| return 0; | |
| } | |
| static int uec_mac_disable(struct uec_priv *uec, comm_dir_e mode) | |
| { | |
| uec_t *uec_regs; | |
| u32 maccfg1; | |
| uec_regs = uec->uec_regs; | |
| maccfg1 = in_be32(&uec_regs->maccfg1); | |
| if (mode & COMM_DIR_TX) { | |
| maccfg1 &= ~MACCFG1_ENABLE_TX; | |
| out_be32(&uec_regs->maccfg1, maccfg1); | |
| uec->mac_tx_enabled = 0; | |
| } | |
| if (mode & COMM_DIR_RX) { | |
| maccfg1 &= ~MACCFG1_ENABLE_RX; | |
| out_be32(&uec_regs->maccfg1, maccfg1); | |
| uec->mac_rx_enabled = 0; | |
| } | |
| return 0; | |
| } | |
| static int uec_restart_tx(struct uec_priv *uec) | |
| { | |
| struct uec_inf *ui = uec->uec_info; | |
| u32 cecr_subblock; | |
| cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num); | |
| qe_issue_cmd(QE_RESTART_TX, cecr_subblock, | |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); | |
| uec->grace_stopped_tx = 0; | |
| return 0; | |
| } | |
| static int uec_restart_rx(struct uec_priv *uec) | |
| { | |
| struct uec_inf *ui = uec->uec_info; | |
| u32 cecr_subblock; | |
| cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num); | |
| qe_issue_cmd(QE_RESTART_RX, cecr_subblock, | |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); | |
| uec->grace_stopped_rx = 0; | |
| return 0; | |
| } | |
| static int uec_open(struct uec_priv *uec, comm_dir_e mode) | |
| { | |
| struct ucc_fast_priv *uccf; | |
| uccf = uec->uccf; | |
| /* check if the UCC number is in range. */ | |
| if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { | |
| printf("%s: ucc_num out of range.\n", __func__); | |
| return -EINVAL; | |
| } | |
| /* Enable MAC */ | |
| uec_mac_enable(uec, mode); | |
| /* Enable UCC fast */ | |
| ucc_fast_enable(uccf, mode); | |
| /* RISC microcode start */ | |
| if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) | |
| uec_restart_tx(uec); | |
| if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) | |
| uec_restart_rx(uec); | |
| return 0; | |
| } | |
| static int uec_set_mac_if_mode(struct uec_priv *uec) | |
| { | |
| struct uec_inf *uec_info = uec->uec_info; | |
| phy_interface_t enet_if_mode; | |
| uec_t *uec_regs; | |
| u32 upsmr; | |
| u32 maccfg2; | |
| uec_regs = uec->uec_regs; | |
| enet_if_mode = uec_info->enet_interface_type; | |
| maccfg2 = in_be32(&uec_regs->maccfg2); | |
| maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; | |
| upsmr = in_be32(&uec->uccf->uf_regs->upsmr); | |
| upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); | |
| switch (uec_info->speed) { | |
| case SPEED_10: | |
| maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; | |
| switch (enet_if_mode) { | |
| case PHY_INTERFACE_MODE_MII: | |
| break; | |
| case PHY_INTERFACE_MODE_RGMII: | |
| upsmr |= (UPSMR_RPM | UPSMR_R10M); | |
| break; | |
| case PHY_INTERFACE_MODE_RMII: | |
| upsmr |= (UPSMR_R10M | UPSMR_RMM); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| break; | |
| case SPEED_100: | |
| maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; | |
| switch (enet_if_mode) { | |
| case PHY_INTERFACE_MODE_MII: | |
| break; | |
| case PHY_INTERFACE_MODE_RGMII: | |
| upsmr |= UPSMR_RPM; | |
| break; | |
| case PHY_INTERFACE_MODE_RMII: | |
| upsmr |= UPSMR_RMM; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| break; | |
| case SPEED_1000: | |
| maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; | |
| switch (enet_if_mode) { | |
| case PHY_INTERFACE_MODE_GMII: | |
| break; | |
| case PHY_INTERFACE_MODE_TBI: | |
| upsmr |= UPSMR_TBIM; | |
| break; | |
| case PHY_INTERFACE_MODE_RTBI: | |
| upsmr |= (UPSMR_RPM | UPSMR_TBIM); | |
| break; | |
| case PHY_INTERFACE_MODE_RGMII_RXID: | |
| case PHY_INTERFACE_MODE_RGMII_TXID: | |
| case PHY_INTERFACE_MODE_RGMII_ID: | |
| case PHY_INTERFACE_MODE_RGMII: | |
| upsmr |= UPSMR_RPM; | |
| break; | |
| case PHY_INTERFACE_MODE_SGMII: | |
| upsmr |= UPSMR_SGMM; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| out_be32(&uec_regs->maccfg2, maccfg2); | |
| out_be32(&uec->uccf->uf_regs->upsmr, upsmr); | |
| return 0; | |
| } | |
| static int qe_uec_start(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct uec_priv *uec = priv->uec; | |
| struct phy_device *phydev = priv->phydev; | |
| struct uec_inf *uec_info = uec->uec_info; | |
| int err; | |
| if (!phydev) | |
| return -ENODEV; | |
| /* Setup MAC interface mode */ | |
| genphy_update_link(phydev); | |
| genphy_parse_link(phydev); | |
| uec_info->speed = phydev->speed; | |
| uec_set_mac_if_mode(uec); | |
| err = uec_open(uec, COMM_DIR_RX_AND_TX); | |
| if (err) { | |
| printf("%s: cannot enable UEC device\n", dev->name); | |
| return -EINVAL; | |
| } | |
| return (phydev->link ? 0 : -EINVAL); | |
| } | |
| static int qe_uec_send(struct udevice *dev, void *packet, int length) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct uec_priv *uec = priv->uec; | |
| struct ucc_fast_priv *uccf = uec->uccf; | |
| struct buffer_descriptor *bd; | |
| u16 status; | |
| int i; | |
| int result = 0; | |
| uccf = uec->uccf; | |
| bd = uec->tx_bd; | |
| /* Find an empty TxBD */ | |
| for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) { | |
| if (i > 0x100000) { | |
| printf("%s: tx buffer not ready\n", dev->name); | |
| return result; | |
| } | |
| } | |
| /* Init TxBD */ | |
| BD_DATA_SET(bd, packet); | |
| BD_LENGTH_SET(bd, length); | |
| status = BD_STATUS(bd); | |
| status &= BD_WRAP; | |
| status |= (TX_BD_READY | TX_BD_LAST); | |
| BD_STATUS_SET(bd, status); | |
| /* Tell UCC to transmit the buffer */ | |
| ucc_fast_transmit_on_demand(uccf); | |
| /* Wait for buffer to be transmitted */ | |
| for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) { | |
| if (i > 0x100000) { | |
| printf("%s: tx error\n", dev->name); | |
| return result; | |
| } | |
| } | |
| /* Ok, the buffer be transimitted */ | |
| BD_ADVANCE(bd, status, uec->p_tx_bd_ring); | |
| uec->tx_bd = bd; | |
| result = 1; | |
| return result; | |
| } | |
| /* | |
| * Receive frame: | |
| * - wait for the next BD to get ready bit set | |
| * - clean up the descriptor | |
| * - move on and indicate to HW that the cleaned BD is available for Rx | |
| */ | |
| static int qe_uec_recv(struct udevice *dev, int flags, uchar **packetp) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct uec_priv *uec = priv->uec; | |
| struct buffer_descriptor *bd; | |
| u16 status; | |
| u16 len = 0; | |
| u8 *data; | |
| *packetp = memalign(ARCH_DMA_MINALIGN, MAX_RXBUF_LEN); | |
| if (*packetp == 0) { | |
| printf("%s: error allocating packetp\n", __func__); | |
| return -ENOMEM; | |
| } | |
| bd = uec->rx_bd; | |
| status = BD_STATUS(bd); | |
| while (!(status & RX_BD_EMPTY)) { | |
| if (!(status & RX_BD_ERROR)) { | |
| data = BD_DATA(bd); | |
| len = BD_LENGTH(bd); | |
| memcpy(*packetp, (char *)data, len); | |
| } else { | |
| printf("%s: Rx error\n", dev->name); | |
| } | |
| status &= BD_CLEAN; | |
| BD_LENGTH_SET(bd, 0); | |
| BD_STATUS_SET(bd, status | RX_BD_EMPTY); | |
| BD_ADVANCE(bd, status, uec->p_rx_bd_ring); | |
| status = BD_STATUS(bd); | |
| } | |
| uec->rx_bd = bd; | |
| return len; | |
| } | |
| static int uec_graceful_stop_tx(struct uec_priv *uec) | |
| { | |
| ucc_fast_t *uf_regs; | |
| u32 cecr_subblock; | |
| u32 ucce; | |
| uf_regs = uec->uccf->uf_regs; | |
| /* Clear the grace stop event */ | |
| out_be32(&uf_regs->ucce, UCCE_GRA); | |
| /* Issue host command */ | |
| cecr_subblock = | |
| ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); | |
| qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, | |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); | |
| /* Wait for command to complete */ | |
| do { | |
| ucce = in_be32(&uf_regs->ucce); | |
| } while (!(ucce & UCCE_GRA)); | |
| uec->grace_stopped_tx = 1; | |
| return 0; | |
| } | |
| static int uec_graceful_stop_rx(struct uec_priv *uec) | |
| { | |
| u32 cecr_subblock; | |
| u8 ack; | |
| if (!uec->p_rx_glbl_pram) { | |
| printf("%s: No init rx global parameter\n", __func__); | |
| return -EINVAL; | |
| } | |
| /* Clear acknowledge bit */ | |
| ack = uec->p_rx_glbl_pram->rxgstpack; | |
| ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; | |
| uec->p_rx_glbl_pram->rxgstpack = ack; | |
| /* Keep issuing cmd and checking ack bit until it is asserted */ | |
| do { | |
| /* Issue host command */ | |
| cecr_subblock = | |
| ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); | |
| qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, | |
| (u8)QE_CR_PROTOCOL_ETHERNET, 0); | |
| ack = uec->p_rx_glbl_pram->rxgstpack; | |
| } while (!(ack & GRACEFUL_STOP_ACKNOWLEDGE_RX)); | |
| uec->grace_stopped_rx = 1; | |
| return 0; | |
| } | |
| static int uec_stop(struct uec_priv *uec, comm_dir_e mode) | |
| { | |
| /* check if the UCC number is in range. */ | |
| if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { | |
| printf("%s: ucc_num out of range.\n", __func__); | |
| return -EINVAL; | |
| } | |
| /* Stop any transmissions */ | |
| if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) | |
| uec_graceful_stop_tx(uec); | |
| /* Stop any receptions */ | |
| if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) | |
| uec_graceful_stop_rx(uec); | |
| /* Disable the UCC fast */ | |
| ucc_fast_disable(uec->uccf, mode); | |
| /* Disable the MAC */ | |
| uec_mac_disable(uec, mode); | |
| return 0; | |
| } | |
| static void qe_uec_stop(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct uec_priv *uec = priv->uec; | |
| uec_stop(uec, COMM_DIR_RX_AND_TX); | |
| } | |
| static int qe_uec_set_hwaddr(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct eth_pdata *pdata = dev_get_plat(dev); | |
| struct uec_priv *uec = priv->uec; | |
| uec_t *uec_regs = uec->uec_regs; | |
| uchar *mac = pdata->enetaddr; | |
| u32 mac_addr1; | |
| u32 mac_addr2; | |
| /* | |
| * if a station address of 0x12345678ABCD, perform a write to | |
| * MACSTNADDR1 of 0xCDAB7856, | |
| * MACSTNADDR2 of 0x34120000 | |
| */ | |
| mac_addr1 = (mac[5] << 24) | (mac[4] << 16) | | |
| (mac[3] << 8) | (mac[2]); | |
| out_be32(&uec_regs->macstnaddr1, mac_addr1); | |
| mac_addr2 = ((mac[1] << 24) | (mac[0] << 16)) & 0xffff0000; | |
| out_be32(&uec_regs->macstnaddr2, mac_addr2); | |
| return 0; | |
| } | |
| static int qe_uec_free_pkt(struct udevice *dev, uchar *packet, int length) | |
| { | |
| if (packet) | |
| free(packet); | |
| return 0; | |
| } | |
| static const struct eth_ops qe_uec_eth_ops = { | |
| .start = qe_uec_start, | |
| .send = qe_uec_send, | |
| .recv = qe_uec_recv, | |
| .free_pkt = qe_uec_free_pkt, | |
| .stop = qe_uec_stop, | |
| .write_hwaddr = qe_uec_set_hwaddr, | |
| }; | |
| static int uec_convert_threads_num(enum uec_num_of_threads threads_num, | |
| int *threads_num_ret) | |
| { | |
| int num_threads_numerica; | |
| switch (threads_num) { | |
| case UEC_NUM_OF_THREADS_1: | |
| num_threads_numerica = 1; | |
| break; | |
| case UEC_NUM_OF_THREADS_2: | |
| num_threads_numerica = 2; | |
| break; | |
| case UEC_NUM_OF_THREADS_4: | |
| num_threads_numerica = 4; | |
| break; | |
| case UEC_NUM_OF_THREADS_6: | |
| num_threads_numerica = 6; | |
| break; | |
| case UEC_NUM_OF_THREADS_8: | |
| num_threads_numerica = 8; | |
| break; | |
| default: | |
| printf("%s: Bad number of threads value.", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| *threads_num_ret = num_threads_numerica; | |
| return 0; | |
| } | |
| static void uec_init_tx_parameter(struct uec_priv *uec, int num_threads_tx) | |
| { | |
| struct uec_inf *uec_info; | |
| u32 end_bd; | |
| u8 bmrx = 0; | |
| int i; | |
| uec_info = uec->uec_info; | |
| /* Alloc global Tx parameter RAM page */ | |
| uec->tx_glbl_pram_offset = | |
| qe_muram_alloc(sizeof(struct uec_tx_global_pram), | |
| UEC_TX_GLOBAL_PRAM_ALIGNMENT); | |
| uec->p_tx_glbl_pram = (struct uec_tx_global_pram *) | |
| qe_muram_addr(uec->tx_glbl_pram_offset); | |
| /* Zero the global Tx prameter RAM */ | |
| memset(uec->p_tx_glbl_pram, 0, sizeof(struct uec_tx_global_pram)); | |
| /* Init global Tx parameter RAM */ | |
| /* TEMODER, RMON statistics disable, one Tx queue */ | |
| out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); | |
| /* SQPTR */ | |
| uec->send_q_mem_reg_offset = | |
| qe_muram_alloc(sizeof(struct uec_send_queue_qd), | |
| UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); | |
| uec->p_send_q_mem_reg = (struct uec_send_queue_mem_region *) | |
| qe_muram_addr(uec->send_q_mem_reg_offset); | |
| out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); | |
| /* Setup the table with TxBDs ring */ | |
| end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) | |
| * SIZEOFBD; | |
| out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, | |
| (u32)(uec->p_tx_bd_ring)); | |
| out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, | |
| end_bd); | |
| /* Scheduler Base Pointer, we have only one Tx queue, no need it */ | |
| out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); | |
| /* TxRMON Base Pointer, TxRMON disable, we don't need it */ | |
| out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); | |
| /* TSTATE, global snooping, big endian, the CSB bus selected */ | |
| bmrx = BMR_INIT_VALUE; | |
| out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); | |
| /* IPH_Offset */ | |
| for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) | |
| out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); | |
| /* VTAG table */ | |
| for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) | |
| out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); | |
| /* TQPTR */ | |
| uec->thread_dat_tx_offset = | |
| qe_muram_alloc(num_threads_tx * | |
| sizeof(struct uec_thread_data_tx) + | |
| 32 * (num_threads_tx == 1), | |
| UEC_THREAD_DATA_ALIGNMENT); | |
| uec->p_thread_data_tx = (struct uec_thread_data_tx *) | |
| qe_muram_addr(uec->thread_dat_tx_offset); | |
| out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); | |
| } | |
| static void uec_init_rx_parameter(struct uec_priv *uec, int num_threads_rx) | |
| { | |
| u8 bmrx = 0; | |
| int i; | |
| struct uec_82xx_add_filtering_pram *p_af_pram; | |
| /* Allocate global Rx parameter RAM page */ | |
| uec->rx_glbl_pram_offset = | |
| qe_muram_alloc(sizeof(struct uec_rx_global_pram), | |
| UEC_RX_GLOBAL_PRAM_ALIGNMENT); | |
| uec->p_rx_glbl_pram = (struct uec_rx_global_pram *) | |
| qe_muram_addr(uec->rx_glbl_pram_offset); | |
| /* Zero Global Rx parameter RAM */ | |
| memset(uec->p_rx_glbl_pram, 0, sizeof(struct uec_rx_global_pram)); | |
| /* Init global Rx parameter RAM */ | |
| /* | |
| * REMODER, Extended feature mode disable, VLAN disable, | |
| * LossLess flow control disable, Receive firmware statisic disable, | |
| * Extended address parsing mode disable, One Rx queues, | |
| * Dynamic maximum/minimum frame length disable, IP checksum check | |
| * disable, IP address alignment disable | |
| */ | |
| out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); | |
| /* RQPTR */ | |
| uec->thread_dat_rx_offset = | |
| qe_muram_alloc(num_threads_rx * | |
| sizeof(struct uec_thread_data_rx), | |
| UEC_THREAD_DATA_ALIGNMENT); | |
| uec->p_thread_data_rx = (struct uec_thread_data_rx *) | |
| qe_muram_addr(uec->thread_dat_rx_offset); | |
| out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); | |
| /* Type_or_Len */ | |
| out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); | |
| /* RxRMON base pointer, we don't need it */ | |
| out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); | |
| /* IntCoalescingPTR, we don't need it, no interrupt */ | |
| out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); | |
| /* RSTATE, global snooping, big endian, the CSB bus selected */ | |
| bmrx = BMR_INIT_VALUE; | |
| out_8(&uec->p_rx_glbl_pram->rstate, bmrx); | |
| /* MRBLR */ | |
| out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); | |
| /* RBDQPTR */ | |
| uec->rx_bd_qs_tbl_offset = | |
| qe_muram_alloc(sizeof(struct uec_rx_bd_queues_entry) + | |
| sizeof(struct uec_rx_pref_bds), | |
| UEC_RX_BD_QUEUES_ALIGNMENT); | |
| uec->p_rx_bd_qs_tbl = (struct uec_rx_bd_queues_entry *) | |
| qe_muram_addr(uec->rx_bd_qs_tbl_offset); | |
| /* Zero it */ | |
| memset(uec->p_rx_bd_qs_tbl, 0, sizeof(struct uec_rx_bd_queues_entry) + | |
| sizeof(struct uec_rx_pref_bds)); | |
| out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); | |
| out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, | |
| (u32)uec->p_rx_bd_ring); | |
| /* MFLR */ | |
| out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); | |
| /* MINFLR */ | |
| out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); | |
| /* MAXD1 */ | |
| out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); | |
| /* MAXD2 */ | |
| out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); | |
| /* ECAM_PTR */ | |
| out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); | |
| /* L2QT */ | |
| out_be32(&uec->p_rx_glbl_pram->l2qt, 0); | |
| /* L3QT */ | |
| for (i = 0; i < 8; i++) | |
| out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); | |
| /* VLAN_TYPE */ | |
| out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); | |
| /* TCI */ | |
| out_be16(&uec->p_rx_glbl_pram->vlantci, 0); | |
| /* Clear PQ2 style address filtering hash table */ | |
| p_af_pram = (struct uec_82xx_add_filtering_pram *) | |
| uec->p_rx_glbl_pram->addressfiltering; | |
| p_af_pram->iaddr_h = 0; | |
| p_af_pram->iaddr_l = 0; | |
| p_af_pram->gaddr_h = 0; | |
| p_af_pram->gaddr_l = 0; | |
| } | |
| static int uec_issue_init_enet_rxtx_cmd(struct uec_priv *uec, | |
| int thread_tx, int thread_rx) | |
| { | |
| struct uec_init_cmd_pram *p_init_enet_param; | |
| u32 init_enet_param_offset; | |
| struct uec_inf *uec_info; | |
| struct ucc_fast_inf *uf_info; | |
| int i; | |
| int snum; | |
| u32 off; | |
| u32 entry_val; | |
| u32 command; | |
| u32 cecr_subblock; | |
| uec_info = uec->uec_info; | |
| uf_info = &uec_info->uf_info; | |
| /* Allocate init enet command parameter */ | |
| uec->init_enet_param_offset = | |
| qe_muram_alloc(sizeof(struct uec_init_cmd_pram), 4); | |
| init_enet_param_offset = uec->init_enet_param_offset; | |
| uec->p_init_enet_param = (struct uec_init_cmd_pram *) | |
| qe_muram_addr(uec->init_enet_param_offset); | |
| /* Zero init enet command struct */ | |
| memset((void *)uec->p_init_enet_param, 0, | |
| sizeof(struct uec_init_cmd_pram)); | |
| /* Init the command struct */ | |
| p_init_enet_param = uec->p_init_enet_param; | |
| p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; | |
| p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; | |
| p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; | |
| p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; | |
| p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; | |
| p_init_enet_param->largestexternallookupkeysize = 0; | |
| p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) | |
| << ENET_INIT_PARAM_RGF_SHIFT; | |
| p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) | |
| << ENET_INIT_PARAM_TGF_SHIFT; | |
| /* Init Rx global parameter pointer */ | |
| p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | | |
| (u32)uec_info->risc_rx; | |
| /* Init Rx threads */ | |
| for (i = 0; i < (thread_rx + 1); i++) { | |
| snum = qe_get_snum(); | |
| if (snum < 0) { | |
| printf("%s can not get snum\n", __func__); | |
| return -ENOMEM; | |
| } | |
| if (i == 0) { | |
| off = 0; | |
| } else { | |
| off = qe_muram_alloc(sizeof(struct uec_thread_rx_pram), | |
| UEC_THREAD_RX_PRAM_ALIGNMENT); | |
| } | |
| entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | | |
| off | (u32)uec_info->risc_rx; | |
| p_init_enet_param->rxthread[i] = entry_val; | |
| } | |
| /* Init Tx global parameter pointer */ | |
| p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | | |
| (u32)uec_info->risc_tx; | |
| /* Init Tx threads */ | |
| for (i = 0; i < thread_tx; i++) { | |
| snum = qe_get_snum(); | |
| if (snum < 0) { | |
| printf("%s can not get snum\n", __func__); | |
| return -ENOMEM; | |
| } | |
| off = qe_muram_alloc(sizeof(struct uec_thread_tx_pram), | |
| UEC_THREAD_TX_PRAM_ALIGNMENT); | |
| entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | | |
| off | (u32)uec_info->risc_tx; | |
| p_init_enet_param->txthread[i] = entry_val; | |
| } | |
| __asm__ __volatile__("sync"); | |
| /* Issue QE command */ | |
| command = QE_INIT_TX_RX; | |
| cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num); | |
| qe_issue_cmd(command, cecr_subblock, (u8)QE_CR_PROTOCOL_ETHERNET, | |
| init_enet_param_offset); | |
| return 0; | |
| } | |
| static int uec_startup(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct uec_priv *uec = priv->uec; | |
| struct uec_inf *uec_info; | |
| struct ucc_fast_inf *uf_info; | |
| struct ucc_fast_priv *uccf; | |
| ucc_fast_t *uf_regs; | |
| uec_t *uec_regs; | |
| int num_threads_tx; | |
| int num_threads_rx; | |
| u32 utbipar; | |
| u32 length; | |
| u32 align; | |
| struct buffer_descriptor *bd; | |
| u8 *buf; | |
| int i; | |
| uec_info = uec->uec_info; | |
| uf_info = &uec_info->uf_info; | |
| /* Check if Rx BD ring len is illegal */ | |
| if (uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN || | |
| uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT) { | |
| printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| /* Check if Tx BD ring len is illegal */ | |
| if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { | |
| printf("%s: Tx BD ring length must not be smaller than 2.\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| /* Check if MRBLR is illegal */ | |
| if (MAX_RXBUF_LEN == 0 || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { | |
| printf("%s: max rx buffer length must be mutliple of 128.\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| /* Both Rx and Tx are stopped */ | |
| uec->grace_stopped_rx = 1; | |
| uec->grace_stopped_tx = 1; | |
| /* Init UCC fast */ | |
| if (ucc_fast_init(uf_info, &uccf)) { | |
| printf("%s: failed to init ucc fast\n", __func__); | |
| return -ENOMEM; | |
| } | |
| /* Save uccf */ | |
| uec->uccf = uccf; | |
| /* Convert the Tx threads number */ | |
| if (uec_convert_threads_num(uec_info->num_threads_tx, | |
| &num_threads_tx)) | |
| return -EINVAL; | |
| /* Convert the Rx threads number */ | |
| if (uec_convert_threads_num(uec_info->num_threads_rx, | |
| &num_threads_rx)) | |
| return -EINVAL; | |
| uf_regs = uccf->uf_regs; | |
| /* UEC register is following UCC fast registers */ | |
| uec_regs = (uec_t *)(&uf_regs->ucc_eth); | |
| /* Save the UEC register pointer to UEC private struct */ | |
| uec->uec_regs = uec_regs; | |
| /* Init UPSMR, enable hardware statistics (UCC) */ | |
| out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); | |
| /* Init MACCFG1, flow control disable, disable Tx and Rx */ | |
| out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); | |
| /* Init MACCFG2, length check, MAC PAD and CRC enable */ | |
| out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); | |
| /* Setup UTBIPAR */ | |
| utbipar = in_be32(&uec_regs->utbipar); | |
| utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; | |
| /* Initialize UTBIPAR address to CFG_UTBIPAR_INIT_TBIPA for ALL UEC. | |
| * This frees up the remaining SMI addresses for use. | |
| */ | |
| utbipar |= CFG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT; | |
| out_be32(&uec_regs->utbipar, utbipar); | |
| /* Allocate Tx BDs */ | |
| length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / | |
| UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * | |
| UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; | |
| if ((uec_info->tx_bd_ring_len * SIZEOFBD) % | |
| UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) | |
| length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; | |
| align = UEC_TX_BD_RING_ALIGNMENT; | |
| uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); | |
| if (uec->tx_bd_ring_offset != 0) | |
| uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) | |
| & ~(align - 1)); | |
| /* Zero all of Tx BDs */ | |
| memset((void *)(uec->tx_bd_ring_offset), 0, length + align); | |
| /* Allocate Rx BDs */ | |
| length = uec_info->rx_bd_ring_len * SIZEOFBD; | |
| align = UEC_RX_BD_RING_ALIGNMENT; | |
| uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); | |
| if (uec->rx_bd_ring_offset != 0) | |
| uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) | |
| & ~(align - 1)); | |
| /* Zero all of Rx BDs */ | |
| memset((void *)(uec->rx_bd_ring_offset), 0, length + align); | |
| /* Allocate Rx buffer */ | |
| length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; | |
| align = UEC_RX_DATA_BUF_ALIGNMENT; | |
| uec->rx_buf_offset = (u32)malloc(length + align); | |
| if (uec->rx_buf_offset != 0) | |
| uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) | |
| & ~(align - 1)); | |
| /* Zero all of the Rx buffer */ | |
| memset((void *)(uec->rx_buf_offset), 0, length + align); | |
| /* Init TxBD ring */ | |
| bd = (struct buffer_descriptor *)uec->p_tx_bd_ring; | |
| uec->tx_bd = bd; | |
| for (i = 0; i < uec_info->tx_bd_ring_len; i++) { | |
| BD_DATA_CLEAR(bd); | |
| BD_STATUS_SET(bd, 0); | |
| BD_LENGTH_SET(bd, 0); | |
| bd++; | |
| } | |
| BD_STATUS_SET((--bd), TX_BD_WRAP); | |
| /* Init RxBD ring */ | |
| bd = (struct buffer_descriptor *)uec->p_rx_bd_ring; | |
| uec->rx_bd = bd; | |
| buf = uec->p_rx_buf; | |
| for (i = 0; i < uec_info->rx_bd_ring_len; i++) { | |
| BD_DATA_SET(bd, buf); | |
| BD_LENGTH_SET(bd, 0); | |
| BD_STATUS_SET(bd, RX_BD_EMPTY); | |
| buf += MAX_RXBUF_LEN; | |
| bd++; | |
| } | |
| BD_STATUS_SET((--bd), RX_BD_WRAP | RX_BD_EMPTY); | |
| /* Init global Tx parameter RAM */ | |
| uec_init_tx_parameter(uec, num_threads_tx); | |
| /* Init global Rx parameter RAM */ | |
| uec_init_rx_parameter(uec, num_threads_rx); | |
| /* Init ethernet Tx and Rx parameter command */ | |
| if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, | |
| num_threads_rx)) { | |
| printf("%s issue init enet cmd failed\n", __func__); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| /* Convert a string to a QE clock source enum | |
| * | |
| * This function takes a string, typically from a property in the device | |
| * tree, and returns the corresponding "enum qe_clock" value. | |
| */ | |
| enum qe_clock qe_clock_source(const char *source) | |
| { | |
| unsigned int i; | |
| if (strcasecmp(source, "none") == 0) | |
| return QE_CLK_NONE; | |
| if (strncasecmp(source, "brg", 3) == 0) { | |
| i = dectoul(source + 3, NULL); | |
| if (i >= 1 && i <= 16) | |
| return (QE_BRG1 - 1) + i; | |
| else | |
| return QE_CLK_DUMMY; | |
| } | |
| if (strncasecmp(source, "clk", 3) == 0) { | |
| i = dectoul(source + 3, NULL); | |
| if (i >= 1 && i <= 24) | |
| return (QE_CLK1 - 1) + i; | |
| else | |
| return QE_CLK_DUMMY; | |
| } | |
| return QE_CLK_DUMMY; | |
| } | |
| static void qe_uec_set_eth_type(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct uec_priv *uec = priv->uec; | |
| struct uec_inf *uec_info = uec->uec_info; | |
| struct ucc_fast_inf *uf_info = &uec_info->uf_info; | |
| switch (uec_info->enet_interface_type) { | |
| case PHY_INTERFACE_MODE_GMII: | |
| case PHY_INTERFACE_MODE_RGMII: | |
| case PHY_INTERFACE_MODE_RGMII_ID: | |
| case PHY_INTERFACE_MODE_RGMII_RXID: | |
| case PHY_INTERFACE_MODE_RGMII_TXID: | |
| case PHY_INTERFACE_MODE_TBI: | |
| case PHY_INTERFACE_MODE_RTBI: | |
| case PHY_INTERFACE_MODE_SGMII: | |
| uf_info->eth_type = GIGA_ETH; | |
| break; | |
| default: | |
| uf_info->eth_type = FAST_ETH; | |
| break; | |
| } | |
| } | |
| static int qe_uec_set_uec_info(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct eth_pdata *pdata = dev_get_plat(dev); | |
| struct uec_priv *uec = priv->uec; | |
| struct uec_inf *uec_info; | |
| struct ucc_fast_inf *uf_info; | |
| const char *s; | |
| int ret; | |
| u32 val; | |
| uec_info = (struct uec_inf *)malloc(sizeof(struct uec_inf)); | |
| if (!uec_info) | |
| return -ENOMEM; | |
| uf_info = &uec_info->uf_info; | |
| ret = dev_read_u32(dev, "cell-index", &val); | |
| if (ret) { | |
| ret = dev_read_u32(dev, "device-id", &val); | |
| if (ret) { | |
| pr_err("no cell-index nor device-id found!"); | |
| goto out; | |
| } | |
| } | |
| uf_info->ucc_num = val - 1; | |
| if (uf_info->ucc_num < 0 || uf_info->ucc_num > 7) { | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| ret = dev_read_string_index(dev, "rx-clock-name", 0, &s); | |
| if (!ret) { | |
| uf_info->rx_clock = qe_clock_source(s); | |
| if (uf_info->rx_clock < QE_CLK_NONE || | |
| uf_info->rx_clock > QE_CLK24) { | |
| pr_err("invalid rx-clock-name property\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| } else { | |
| ret = dev_read_u32(dev, "rx-clock", &val); | |
| if (ret) { | |
| /* | |
| * If both rx-clock-name and rx-clock are missing, | |
| * we want to tell people to use rx-clock-name. | |
| */ | |
| pr_err("missing rx-clock-name property\n"); | |
| goto out; | |
| } | |
| if (val < QE_CLK_NONE || val > QE_CLK24) { | |
| pr_err("invalid rx-clock property\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| uf_info->rx_clock = val; | |
| } | |
| ret = dev_read_string_index(dev, "tx-clock-name", 0, &s); | |
| if (!ret) { | |
| uf_info->tx_clock = qe_clock_source(s); | |
| if (uf_info->tx_clock < QE_CLK_NONE || | |
| uf_info->tx_clock > QE_CLK24) { | |
| pr_err("invalid tx-clock-name property\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| } else { | |
| ret = dev_read_u32(dev, "tx-clock", &val); | |
| if (ret) { | |
| pr_err("missing tx-clock-name property\n"); | |
| goto out; | |
| } | |
| if (val < QE_CLK_NONE || val > QE_CLK24) { | |
| pr_err("invalid tx-clock property\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| uf_info->tx_clock = val; | |
| } | |
| uec_info->num_threads_tx = UEC_NUM_OF_THREADS_1; | |
| uec_info->num_threads_rx = UEC_NUM_OF_THREADS_1; | |
| uec_info->risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2; | |
| uec_info->risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2; | |
| uec_info->tx_bd_ring_len = 16; | |
| uec_info->rx_bd_ring_len = 16; | |
| #if (MAX_QE_RISC == 4) | |
| uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS; | |
| uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS; | |
| #endif | |
| uec_info->enet_interface_type = pdata->phy_interface; | |
| uec->uec_info = uec_info; | |
| qe_uec_set_eth_type(dev); | |
| return 0; | |
| out: | |
| free(uec_info); | |
| return ret; | |
| } | |
| static int qe_uec_probe(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| struct eth_pdata *pdata = dev_get_plat(dev); | |
| struct uec_priv *uec; | |
| int ret; | |
| /* Allocate the UEC private struct */ | |
| uec = (struct uec_priv *)malloc(sizeof(struct uec_priv)); | |
| if (!uec) | |
| return -ENOMEM; | |
| memset(uec, 0, sizeof(struct uec_priv)); | |
| priv->uec = uec; | |
| uec->uec_regs = (uec_t *)pdata->iobase; | |
| /* setup uec info struct */ | |
| ret = qe_uec_set_uec_info(dev); | |
| if (ret) { | |
| free(uec); | |
| return ret; | |
| } | |
| ret = uec_startup(dev); | |
| if (ret) { | |
| free(uec->uec_info); | |
| free(uec); | |
| return ret; | |
| } | |
| priv->phydev = dm_eth_phy_connect(dev); | |
| return 0; | |
| } | |
| /* | |
| * Remove the driver from an interface: | |
| * - free up allocated memory | |
| */ | |
| static int qe_uec_remove(struct udevice *dev) | |
| { | |
| struct qe_uec_priv *priv = dev_get_priv(dev); | |
| free(priv->uec); | |
| return 0; | |
| } | |
| static int qe_uec_of_to_plat(struct udevice *dev) | |
| { | |
| struct eth_pdata *pdata = dev_get_plat(dev); | |
| pdata->iobase = (phys_addr_t)devfdt_get_addr(dev); | |
| pdata->phy_interface = dev_read_phy_mode(dev); | |
| if (pdata->phy_interface == PHY_INTERFACE_MODE_NA) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static const struct udevice_id qe_uec_ids[] = { | |
| { .compatible = QE_UEC_DRIVER_NAME }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(eth_qe_uec) = { | |
| .name = QE_UEC_DRIVER_NAME, | |
| .id = UCLASS_ETH, | |
| .of_match = qe_uec_ids, | |
| .of_to_plat = qe_uec_of_to_plat, | |
| .probe = qe_uec_probe, | |
| .remove = qe_uec_remove, | |
| .ops = &qe_uec_eth_ops, | |
| .priv_auto = sizeof(struct qe_uec_priv), | |
| .plat_auto = sizeof(struct eth_pdata), | |
| }; |