| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright 2019 Google LLC | |
| */ | |
| #define LOG_CATEGORY UCLASS_ACPI_PMC | |
| #include <dm.h> | |
| #include <log.h> | |
| #include <spl.h> | |
| #include <acpi/acpi_s3.h> | |
| #ifdef CONFIG_X86 | |
| #include <asm/intel_pinctrl.h> | |
| #endif | |
| #include <asm/io.h> | |
| #include <power/acpi_pmc.h> | |
| struct tco_regs { | |
| u32 tco_rld; | |
| u32 tco_sts; | |
| u32 tco1_cnt; | |
| u32 tco_tmr; | |
| }; | |
| enum { | |
| TCO_STS_TIMEOUT = 1 << 3, | |
| TCO_STS_SECOND_TO_STS = 1 << 17, | |
| TCO1_CNT_HLT = 1 << 11, | |
| }; | |
| #ifdef CONFIG_X86 | |
| static int gpe0_shift(struct acpi_pmc_upriv *upriv, int regnum) | |
| { | |
| return upriv->gpe0_dwx_shift_base + regnum * 4; | |
| } | |
| int pmc_gpe_init(struct udevice *dev) | |
| { | |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); | |
| struct udevice *itss; | |
| u32 *dw; | |
| u32 gpio_cfg_mask; | |
| u32 gpio_cfg; | |
| int ret, i; | |
| u32 mask; | |
| if (device_get_uclass_id(dev) != UCLASS_ACPI_PMC) | |
| return log_msg_ret("uclass", -EPROTONOSUPPORT); | |
| dw = upriv->gpe0_dw; | |
| mask = upriv->gpe0_dwx_mask; | |
| gpio_cfg_mask = 0; | |
| for (i = 0; i < upriv->gpe0_count; i++) { | |
| gpio_cfg_mask |= mask << gpe0_shift(upriv, i); | |
| if (dw[i] & ~mask) | |
| return log_msg_ret("Base GPE0 value", -EINVAL); | |
| } | |
| /* | |
| * Route the GPIOs to the GPE0 block. Determine that all values | |
| * are different and if they aren't, use the reset values. | |
| */ | |
| if (dw[0] == dw[1] || dw[1] == dw[2]) { | |
| if (spl_phase() > PHASE_TPL) | |
| log_info("PMC: Using default GPE route"); | |
| gpio_cfg = readl(upriv->gpe_cfg); | |
| for (i = 0; i < upriv->gpe0_count; i++) | |
| dw[i] = gpio_cfg >> gpe0_shift(upriv, i); | |
| } else { | |
| gpio_cfg = 0; | |
| for (i = 0; i < upriv->gpe0_count; i++) | |
| gpio_cfg |= dw[i] << gpe0_shift(upriv, i); | |
| clrsetbits_le32(upriv->gpe_cfg, gpio_cfg_mask, gpio_cfg); | |
| } | |
| /* Set the routes in the GPIO communities as well */ | |
| ret = uclass_first_device_err(UCLASS_IRQ, &itss); | |
| if (ret) | |
| return log_msg_ret("Cannot find itss", ret); | |
| pinctrl_route_gpe(itss, dw[0], dw[1], dw[2]); | |
| return 0; | |
| } | |
| #endif /* CONFIG_X86 */ | |
| static void pmc_fill_pm_reg_info(struct udevice *dev) | |
| { | |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); | |
| int i; | |
| upriv->pm1_sts = inw(upriv->acpi_base + PM1_STS); | |
| upriv->pm1_en = inw(upriv->acpi_base + PM1_EN); | |
| upriv->pm1_cnt = inw(upriv->acpi_base + PM1_CNT); | |
| log_debug("pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", | |
| upriv->pm1_sts, upriv->pm1_en, upriv->pm1_cnt); | |
| for (i = 0; i < GPE0_REG_MAX; i++) { | |
| upriv->gpe0_sts[i] = inl(upriv->acpi_base + GPE0_STS + i * 4); | |
| upriv->gpe0_en[i] = inl(upriv->acpi_base + GPE0_EN + i * 4); | |
| log_debug("gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", i, | |
| upriv->gpe0_sts[i], i, upriv->gpe0_en[i]); | |
| } | |
| } | |
| int pmc_disable_tco_base(ulong tco_base) | |
| { | |
| struct tco_regs *regs = (struct tco_regs *)tco_base; | |
| debug("tco_base %lx = %x\n", (ulong)®s->tco1_cnt, TCO1_CNT_HLT); | |
| setio_32(®s->tco1_cnt, TCO1_CNT_HLT); | |
| return 0; | |
| } | |
| int pmc_init(struct udevice *dev) | |
| { | |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); | |
| int ret; | |
| pmc_fill_pm_reg_info(dev); | |
| if (!ops->init) | |
| return -ENOSYS; | |
| ret = ops->init(dev); | |
| if (ret) | |
| return log_msg_ret("Failed to init pmc", ret); | |
| #ifdef DEBUG | |
| pmc_dump_info(dev); | |
| #endif | |
| return 0; | |
| } | |
| int pmc_prev_sleep_state(struct udevice *dev) | |
| { | |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); | |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); | |
| int prev_sleep_state = ACPI_S0; /* Default to S0 */ | |
| if (upriv->pm1_sts & WAK_STS) { | |
| switch (acpi_sleep_from_pm1(upriv->pm1_cnt)) { | |
| case ACPI_S3: | |
| if (IS_ENABLED(HAVE_ACPI_RESUME)) | |
| prev_sleep_state = ACPI_S3; | |
| break; | |
| case ACPI_S5: | |
| prev_sleep_state = ACPI_S5; | |
| break; | |
| default: | |
| break; | |
| } | |
| /* Clear SLP_TYP */ | |
| outl(upriv->pm1_cnt & ~SLP_TYP, upriv->acpi_base + PM1_CNT); | |
| } | |
| if (!ops->prev_sleep_state) | |
| return prev_sleep_state; | |
| return ops->prev_sleep_state(dev, prev_sleep_state); | |
| } | |
| int pmc_disable_tco(struct udevice *dev) | |
| { | |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); | |
| pmc_fill_pm_reg_info(dev); | |
| if (!ops->disable_tco) | |
| return -ENOSYS; | |
| return ops->disable_tco(dev); | |
| } | |
| int pmc_global_reset_set_enable(struct udevice *dev, bool enable) | |
| { | |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); | |
| if (!ops->global_reset_set_enable) | |
| return -ENOSYS; | |
| return ops->global_reset_set_enable(dev, enable); | |
| } | |
| void pmc_dump_info(struct udevice *dev) | |
| { | |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); | |
| int i; | |
| printf("Device: %s\n", dev->name); | |
| printf("ACPI base %x, pmc_bar0 %p, pmc_bar2 %p, gpe_cfg %p\n", | |
| upriv->acpi_base, upriv->pmc_bar0, upriv->pmc_bar2, | |
| upriv->gpe_cfg); | |
| printf("pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", | |
| upriv->pm1_sts, upriv->pm1_en, upriv->pm1_cnt); | |
| for (i = 0; i < GPE0_REG_MAX; i++) { | |
| printf("gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", i, | |
| upriv->gpe0_sts[i], i, upriv->gpe0_en[i]); | |
| } | |
| printf("prsts: %08x\n", upriv->prsts); | |
| printf("tco_sts: %04x %04x\n", upriv->tco1_sts, upriv->tco2_sts); | |
| printf("gen_pmcon1: %08x gen_pmcon2: %08x gen_pmcon3: %08x\n", | |
| upriv->gen_pmcon1, upriv->gen_pmcon2, upriv->gen_pmcon3); | |
| } | |
| int pmc_ofdata_to_uc_plat(struct udevice *dev) | |
| { | |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); | |
| int ret; | |
| ret = dev_read_u32(dev, "gpe0-dwx-mask", &upriv->gpe0_dwx_mask); | |
| if (ret) | |
| return log_msg_ret("no gpe0-dwx-mask", ret); | |
| ret = dev_read_u32(dev, "gpe0-dwx-shift-base", | |
| &upriv->gpe0_dwx_shift_base); | |
| if (ret) | |
| return log_msg_ret("no gpe0-dwx-shift-base", ret); | |
| ret = dev_read_u32(dev, "gpe0-sts", &upriv->gpe0_sts_reg); | |
| if (ret) | |
| return log_msg_ret("no gpe0-sts", ret); | |
| upriv->gpe0_sts_reg += upriv->acpi_base; | |
| ret = dev_read_u32(dev, "gpe0-en", &upriv->gpe0_en_reg); | |
| if (ret) | |
| return log_msg_ret("no gpe0-en", ret); | |
| upriv->gpe0_en_reg += upriv->acpi_base; | |
| return 0; | |
| } | |
| UCLASS_DRIVER(acpi_pmc) = { | |
| .id = UCLASS_ACPI_PMC, | |
| .name = "power-mgr", | |
| .per_device_auto = sizeof(struct acpi_pmc_upriv), | |
| }; |