| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2018 Flowbird | |
| * Martin Fuzzey <martin.fuzzey@flowbird.group> | |
| */ | |
| #include <fdtdec.h> | |
| #include <errno.h> | |
| #include <dm.h> | |
| #include <i2c.h> | |
| #include <log.h> | |
| #include <linux/printk.h> | |
| #include <power/pmic.h> | |
| #include <power/regulator.h> | |
| #include <power/da9063_pmic.h> | |
| static const struct pmic_child_info pmic_children_info[] = { | |
| { .prefix = "ldo", .driver = DA9063_LDO_DRIVER }, | |
| { .prefix = "b", .driver = DA9063_BUCK_DRIVER }, | |
| { }, | |
| }; | |
| /* | |
| * The register map is non contiguous and attempts to read in the holes fail. | |
| * But "pmic dump" tries to dump the full register map. | |
| * So define the holes here so we can fix that. | |
| */ | |
| struct da9063_reg_hole { | |
| u16 first; | |
| u16 last; | |
| }; | |
| static const struct da9063_reg_hole da9063_reg_holes[] = { | |
| DA9063_REG_HOLE_1, | |
| DA9063_REG_HOLE_2, | |
| DA9063_REG_HOLE_3, | |
| /* These aren't readable. I can't see why from the datasheet but | |
| * attempts to read fail and the kernel marks them unreadable too, | |
| */ | |
| {DA9063_REG_OTP_COUNT, DA9063_REG_OTP_DATA}, | |
| }; | |
| static int da9063_reg_count(struct udevice *dev) | |
| { | |
| return DA9063_NUM_OF_REGS; | |
| } | |
| static bool da9063_reg_valid(uint reg) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(da9063_reg_holes); i++) { | |
| const struct da9063_reg_hole *hole = &da9063_reg_holes[i]; | |
| if (reg >= hole->first && reg <= hole->last) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static int da9063_write(struct udevice *dev, uint reg, const uint8_t *buff, | |
| int len) | |
| { | |
| if (dm_i2c_write(dev, reg, buff, len)) { | |
| pr_err("write error to device: %p register: %#x!", dev, reg); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len) | |
| { | |
| if (!da9063_reg_valid(reg)) | |
| return -ENODATA; | |
| if (dm_i2c_read(dev, reg, buff, len)) { | |
| pr_err("read error from device: %p register: %#x!", dev, reg); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static int da9063_bind(struct udevice *dev) | |
| { | |
| ofnode regulators_node; | |
| int children; | |
| regulators_node = dev_read_subnode(dev, "regulators"); | |
| if (!ofnode_valid(regulators_node)) { | |
| debug("%s: %s regulators subnode not found!", __func__, | |
| dev->name); | |
| return -ENXIO; | |
| } | |
| debug("%s: '%s' - found regulators subnode\n", __func__, dev->name); | |
| children = pmic_bind_children(dev, regulators_node, pmic_children_info); | |
| if (!children) | |
| debug("%s: %s - no child found\n", __func__, dev->name); | |
| /* Always return success for this device */ | |
| return 0; | |
| } | |
| static int da9063_probe(struct udevice *dev) | |
| { | |
| return i2c_set_chip_addr_offset_mask(dev, 0x1); | |
| } | |
| static struct dm_pmic_ops da9063_ops = { | |
| .reg_count = da9063_reg_count, | |
| .read = da9063_read, | |
| .write = da9063_write, | |
| }; | |
| static const struct udevice_id da9063_ids[] = { | |
| { .compatible = "dlg,da9063" }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(pmic_da9063) = { | |
| .name = "da9063_pmic", | |
| .id = UCLASS_PMIC, | |
| .of_match = da9063_ids, | |
| .bind = da9063_bind, | |
| .probe = da9063_probe, | |
| .ops = &da9063_ops, | |
| }; |