| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (c) 2010-2013 NVIDIA Corporation | |
| * With help from the mpc8xxx SPI driver | |
| * With more help from omap3_spi SPI driver | |
| */ | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <log.h> | |
| #include <time.h> | |
| #include <asm/global_data.h> | |
| #include <asm/io.h> | |
| #include <asm/gpio.h> | |
| #include <asm/arch/clock.h> | |
| #include <asm/arch/pinmux.h> | |
| #include <asm/arch-tegra/clk_rst.h> | |
| #include <spi.h> | |
| #include <fdtdec.h> | |
| #include <linux/bitops.h> | |
| #include <linux/delay.h> | |
| #include "tegra_spi.h" | |
| DECLARE_GLOBAL_DATA_PTR; | |
| #define SPI_CMD_GO BIT(30) | |
| #define SPI_CMD_ACTIVE_SCLK_SHIFT 26 | |
| #define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT) | |
| #define SPI_CMD_CK_SDA BIT(21) | |
| #define SPI_CMD_ACTIVE_SDA_SHIFT 18 | |
| #define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT) | |
| #define SPI_CMD_CS_POL BIT(16) | |
| #define SPI_CMD_TXEN BIT(15) | |
| #define SPI_CMD_RXEN BIT(14) | |
| #define SPI_CMD_CS_VAL BIT(13) | |
| #define SPI_CMD_CS_SOFT BIT(12) | |
| #define SPI_CMD_CS_DELAY BIT(9) | |
| #define SPI_CMD_CS3_EN BIT(8) | |
| #define SPI_CMD_CS2_EN BIT(7) | |
| #define SPI_CMD_CS1_EN BIT(6) | |
| #define SPI_CMD_CS0_EN BIT(5) | |
| #define SPI_CMD_BIT_LENGTH BIT(4) | |
| #define SPI_CMD_BIT_LENGTH_MASK GENMASK(4, 0) | |
| #define SPI_STAT_BSY BIT(31) | |
| #define SPI_STAT_RDY BIT(30) | |
| #define SPI_STAT_RXF_FLUSH BIT(29) | |
| #define SPI_STAT_TXF_FLUSH BIT(28) | |
| #define SPI_STAT_RXF_UNR BIT(27) | |
| #define SPI_STAT_TXF_OVF BIT(26) | |
| #define SPI_STAT_RXF_EMPTY BIT(25) | |
| #define SPI_STAT_RXF_FULL BIT(24) | |
| #define SPI_STAT_TXF_EMPTY BIT(23) | |
| #define SPI_STAT_TXF_FULL BIT(22) | |
| #define SPI_STAT_SEL_TXRX_N BIT(16) | |
| #define SPI_STAT_CUR_BLKCNT BIT(15) | |
| #define SPI_TIMEOUT 1000 | |
| #define TEGRA_SPI_MAX_FREQ 52000000 | |
| struct spi_regs { | |
| u32 command; /* SPI_COMMAND_0 register */ | |
| u32 status; /* SPI_STATUS_0 register */ | |
| u32 rx_cmp; /* SPI_RX_CMP_0 register */ | |
| u32 dma_ctl; /* SPI_DMA_CTL_0 register */ | |
| u32 tx_fifo; /* SPI_TX_FIFO_0 register */ | |
| u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */ | |
| u32 rx_fifo; /* SPI_RX_FIFO_0 register */ | |
| }; | |
| struct tegra20_sflash_priv { | |
| struct spi_regs *regs; | |
| unsigned int freq; | |
| unsigned int mode; | |
| int periph_id; | |
| int valid; | |
| int last_transaction_us; | |
| }; | |
| int tegra20_sflash_cs_info(struct udevice *bus, unsigned int cs, | |
| struct spi_cs_info *info) | |
| { | |
| /* Tegra20 SPI-Flash - only 1 device ('bus/cs') */ | |
| if (cs != 0) | |
| return -EINVAL; | |
| else | |
| return 0; | |
| } | |
| static int tegra20_sflash_of_to_plat(struct udevice *bus) | |
| { | |
| struct tegra_spi_plat *plat = dev_get_plat(bus); | |
| const void *blob = gd->fdt_blob; | |
| int node = dev_of_offset(bus); | |
| plat->base = dev_read_addr(bus); | |
| plat->periph_id = clock_decode_periph_id(bus); | |
| if (plat->periph_id == PERIPH_ID_NONE) { | |
| debug("%s: could not decode periph id %d\n", __func__, | |
| plat->periph_id); | |
| return -FDT_ERR_NOTFOUND; | |
| } | |
| /* Use 500KHz as a suitable default */ | |
| plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", | |
| 500000); | |
| plat->deactivate_delay_us = fdtdec_get_int(blob, node, | |
| "spi-deactivate-delay", 0); | |
| debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n", | |
| __func__, plat->base, plat->periph_id, plat->frequency, | |
| plat->deactivate_delay_us); | |
| return 0; | |
| } | |
| static int tegra20_sflash_probe(struct udevice *bus) | |
| { | |
| struct tegra_spi_plat *plat = dev_get_plat(bus); | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| priv->regs = (struct spi_regs *)plat->base; | |
| priv->last_transaction_us = timer_get_us(); | |
| priv->freq = plat->frequency; | |
| priv->periph_id = plat->periph_id; | |
| /* Change SPI clock to correct frequency, PLLP_OUT0 source */ | |
| clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, | |
| priv->freq); | |
| return 0; | |
| } | |
| static int tegra20_sflash_claim_bus(struct udevice *dev) | |
| { | |
| struct udevice *bus = dev->parent; | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| struct spi_regs *regs = priv->regs; | |
| u32 reg; | |
| /* Change SPI clock to correct frequency, PLLP_OUT0 source */ | |
| clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, | |
| priv->freq); | |
| /* Clear stale status here */ | |
| reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \ | |
| SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF; | |
| writel(reg, ®s->status); | |
| debug("%s: STATUS = %08x\n", __func__, readl(®s->status)); | |
| /* | |
| * Use sw-controlled CS, so we can clock in data after ReadID, etc. | |
| */ | |
| reg = (priv->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT; | |
| if (priv->mode & 2) | |
| reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT; | |
| clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK | | |
| SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg); | |
| debug("%s: COMMAND = %08x\n", __func__, readl(®s->command)); | |
| /* | |
| * SPI pins on Tegra20 are muxed - change pinmux later due to UART | |
| * issue. | |
| */ | |
| pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH); | |
| pinmux_tristate_disable(PMUX_PINGRP_LSPI); | |
| pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH); | |
| return 0; | |
| } | |
| static void spi_cs_activate(struct udevice *dev) | |
| { | |
| struct udevice *bus = dev->parent; | |
| struct tegra_spi_plat *pdata = dev_get_plat(bus); | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| /* If it's too soon to do another transaction, wait */ | |
| if (pdata->deactivate_delay_us && | |
| priv->last_transaction_us) { | |
| ulong delay_us; /* The delay completed so far */ | |
| delay_us = timer_get_us() - priv->last_transaction_us; | |
| if (delay_us < pdata->deactivate_delay_us) | |
| udelay(pdata->deactivate_delay_us - delay_us); | |
| } | |
| /* CS is negated on Tegra, so drive a 1 to get a 0 */ | |
| setbits_le32(&priv->regs->command, SPI_CMD_CS_VAL); | |
| } | |
| static void spi_cs_deactivate(struct udevice *dev) | |
| { | |
| struct udevice *bus = dev->parent; | |
| struct tegra_spi_plat *pdata = dev_get_plat(bus); | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| /* CS is negated on Tegra, so drive a 0 to get a 1 */ | |
| clrbits_le32(&priv->regs->command, SPI_CMD_CS_VAL); | |
| /* Remember time of this transaction so we can honour the bus delay */ | |
| if (pdata->deactivate_delay_us) | |
| priv->last_transaction_us = timer_get_us(); | |
| } | |
| static int tegra20_sflash_xfer(struct udevice *dev, unsigned int bitlen, | |
| const void *data_out, void *data_in, | |
| unsigned long flags) | |
| { | |
| struct udevice *bus = dev->parent; | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| struct spi_regs *regs = priv->regs; | |
| u32 reg, tmpdout, tmpdin = 0; | |
| const u8 *dout = data_out; | |
| u8 *din = data_in; | |
| int num_bytes; | |
| int ret; | |
| debug("%s: slave %u:%u dout %p din %p bitlen %u\n", | |
| __func__, dev_seq(bus), spi_chip_select(dev), dout, din, bitlen); | |
| if (bitlen % 8) | |
| return -1; | |
| num_bytes = bitlen / 8; | |
| ret = 0; | |
| reg = readl(®s->status); | |
| writel(reg, ®s->status); /* Clear all SPI events via R/W */ | |
| debug("spi_xfer entry: STATUS = %08x\n", reg); | |
| reg = readl(®s->command); | |
| reg |= SPI_CMD_TXEN | SPI_CMD_RXEN; | |
| writel(reg, ®s->command); | |
| debug("spi_xfer: COMMAND = %08x\n", readl(®s->command)); | |
| if (flags & SPI_XFER_BEGIN) | |
| spi_cs_activate(dev); | |
| /* handle data in 32-bit chunks */ | |
| while (num_bytes > 0) { | |
| int bytes; | |
| int is_read = 0; | |
| int tm, i; | |
| tmpdout = 0; | |
| bytes = (num_bytes > 4) ? 4 : num_bytes; | |
| if (dout != NULL) { | |
| for (i = 0; i < bytes; ++i) | |
| tmpdout = (tmpdout << 8) | dout[i]; | |
| } | |
| num_bytes -= bytes; | |
| if (dout) | |
| dout += bytes; | |
| clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK, | |
| bytes * 8 - 1); | |
| writel(tmpdout, ®s->tx_fifo); | |
| setbits_le32(®s->command, SPI_CMD_GO); | |
| /* | |
| * Wait for SPI transmit FIFO to empty, or to time out. | |
| * The RX FIFO status will be read and cleared last | |
| */ | |
| for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) { | |
| u32 status; | |
| status = readl(®s->status); | |
| /* We can exit when we've had both RX and TX activity */ | |
| if (is_read && (status & SPI_STAT_TXF_EMPTY)) | |
| break; | |
| if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) != | |
| SPI_STAT_RDY) | |
| tm++; | |
| else if (!(status & SPI_STAT_RXF_EMPTY)) { | |
| tmpdin = readl(®s->rx_fifo); | |
| is_read = 1; | |
| /* swap bytes read in */ | |
| if (din != NULL) { | |
| for (i = bytes - 1; i >= 0; --i) { | |
| din[i] = tmpdin & 0xff; | |
| tmpdin >>= 8; | |
| } | |
| din += bytes; | |
| } | |
| } | |
| } | |
| if (tm >= SPI_TIMEOUT) | |
| ret = tm; | |
| /* clear ACK RDY, etc. bits */ | |
| writel(readl(®s->status), ®s->status); | |
| } | |
| if (flags & SPI_XFER_END) | |
| spi_cs_deactivate(dev); | |
| debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n", | |
| tmpdin, readl(®s->status)); | |
| if (ret) { | |
| printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int tegra20_sflash_set_speed(struct udevice *bus, uint speed) | |
| { | |
| struct tegra_spi_plat *plat = dev_get_plat(bus); | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| if (speed > plat->frequency) | |
| speed = plat->frequency; | |
| priv->freq = speed; | |
| debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq); | |
| return 0; | |
| } | |
| static int tegra20_sflash_set_mode(struct udevice *bus, uint mode) | |
| { | |
| struct tegra20_sflash_priv *priv = dev_get_priv(bus); | |
| priv->mode = mode; | |
| debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); | |
| return 0; | |
| } | |
| static const struct dm_spi_ops tegra20_sflash_ops = { | |
| .claim_bus = tegra20_sflash_claim_bus, | |
| .xfer = tegra20_sflash_xfer, | |
| .set_speed = tegra20_sflash_set_speed, | |
| .set_mode = tegra20_sflash_set_mode, | |
| .cs_info = tegra20_sflash_cs_info, | |
| }; | |
| static const struct udevice_id tegra20_sflash_ids[] = { | |
| { .compatible = "nvidia,tegra20-sflash" }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(tegra20_sflash) = { | |
| .name = "tegra20_sflash", | |
| .id = UCLASS_SPI, | |
| .of_match = tegra20_sflash_ids, | |
| .ops = &tegra20_sflash_ops, | |
| .of_to_plat = tegra20_sflash_of_to_plat, | |
| .plat_auto = sizeof(struct tegra_spi_plat), | |
| .priv_auto = sizeof(struct tegra20_sflash_priv), | |
| .probe = tegra20_sflash_probe, | |
| }; |