| // SPDX-License-Identifier: GPL-2.0-only | |
| // Copyright (C) 2014 Broadcom Corporation | |
| #include <dt-bindings/clock/bcm21664.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| / { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| model = "BCM21664 SoC"; | |
| compatible = "brcm,bcm21664"; | |
| interrupt-parent = <&gic>; | |
| chosen { | |
| bootargs = "console=ttyS0,115200n8"; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu0: cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a9"; | |
| reg = <0>; | |
| }; | |
| cpu1: cpu@1 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a9"; | |
| enable-method = "brcm,bcm11351-cpu-method"; | |
| secondary-boot-reg = <0x35004178>; | |
| reg = <1>; | |
| }; | |
| }; | |
| gic: interrupt-controller@3ff00100 { | |
| compatible = "arm,cortex-a9-gic"; | |
| #interrupt-cells = <3>; | |
| #address-cells = <0>; | |
| interrupt-controller; | |
| reg = <0x3ff01000 0x1000>, | |
| <0x3ff00100 0x100>; | |
| }; | |
| smc@3404e000 { | |
| compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; | |
| reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */ | |
| }; | |
| uartb: serial@3e000000 { | |
| compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; | |
| reg = <0x3e000000 0x118>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; | |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| status = "disabled"; | |
| }; | |
| uartb2: serial@3e001000 { | |
| compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; | |
| reg = <0x3e001000 0x118>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; | |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| status = "disabled"; | |
| }; | |
| uartb3: serial@3e002000 { | |
| compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; | |
| reg = <0x3e002000 0x118>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; | |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| status = "disabled"; | |
| }; | |
| L2: cache-controller@3ff20000 { | |
| compatible = "arm,pl310-cache"; | |
| reg = <0x3ff20000 0x1000>; | |
| cache-unified; | |
| cache-level = <2>; | |
| }; | |
| brcm,resetmgr@35001f00 { | |
| compatible = "brcm,bcm21664-resetmgr"; | |
| reg = <0x35001f00 0x24>; | |
| }; | |
| timer@35006000 { | |
| compatible = "brcm,kona-timer"; | |
| reg = <0x35006000 0x1c>; | |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; | |
| }; | |
| gpio: gpio@35003000 { | |
| compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; | |
| reg = <0x35003000 0x524>; | |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; | |
| #gpio-cells = <2>; | |
| #interrupt-cells = <2>; | |
| gpio-controller; | |
| interrupt-controller; | |
| }; | |
| sdio1: mmc@3f180000 { | |
| compatible = "brcm,kona-sdhci"; | |
| reg = <0x3f180000 0x801c>; | |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; | |
| status = "disabled"; | |
| }; | |
| sdio2: mmc@3f190000 { | |
| compatible = "brcm,kona-sdhci"; | |
| reg = <0x3f190000 0x801c>; | |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; | |
| status = "disabled"; | |
| }; | |
| sdio3: mmc@3f1a0000 { | |
| compatible = "brcm,kona-sdhci"; | |
| reg = <0x3f1a0000 0x801c>; | |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; | |
| status = "disabled"; | |
| }; | |
| sdio4: mmc@3f1b0000 { | |
| compatible = "brcm,kona-sdhci"; | |
| reg = <0x3f1b0000 0x801c>; | |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; | |
| status = "disabled"; | |
| }; | |
| bsc1: i2c@3e016000 { | |
| compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; | |
| reg = <0x3e016000 0x70>; | |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; | |
| status = "disabled"; | |
| }; | |
| bsc2: i2c@3e017000 { | |
| compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; | |
| reg = <0x3e017000 0x70>; | |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; | |
| status = "disabled"; | |
| }; | |
| bsc3: i2c@3e018000 { | |
| compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; | |
| reg = <0x3e018000 0x70>; | |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; | |
| status = "disabled"; | |
| }; | |
| bsc4: i2c@3e01c000 { | |
| compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; | |
| reg = <0x3e01c000 0x70>; | |
| interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; | |
| status = "disabled"; | |
| }; | |
| clocks { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| /* | |
| * Fixed clocks are defined before CCUs whose | |
| * clocks may depend on them. | |
| */ | |
| ref_32k_clk: ref_32k { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <32768>; | |
| }; | |
| bbl_32k_clk: bbl_32k { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <32768>; | |
| }; | |
| ref_13m_clk: ref_13m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <13000000>; | |
| }; | |
| var_13m_clk: var_13m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <13000000>; | |
| }; | |
| dft_19_5m_clk: dft_19_5m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <19500000>; | |
| }; | |
| ref_crystal_clk: ref_crystal { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <26000000>; | |
| }; | |
| ref_52m_clk: ref_52m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <52000000>; | |
| }; | |
| var_52m_clk: var_52m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <52000000>; | |
| }; | |
| usb_otg_ahb_clk: usb_otg_ahb { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <52000000>; | |
| }; | |
| ref_96m_clk: ref_96m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <96000000>; | |
| }; | |
| var_96m_clk: var_96m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <96000000>; | |
| }; | |
| ref_104m_clk: ref_104m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <104000000>; | |
| }; | |
| var_104m_clk: var_104m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <104000000>; | |
| }; | |
| ref_156m_clk: ref_156m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <156000000>; | |
| }; | |
| var_156m_clk: var_156m { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <156000000>; | |
| }; | |
| root_ccu: root_ccu@35001000 { | |
| compatible = "brcm,bcm21664-root-ccu"; | |
| reg = <0x35001000 0x0f00>; | |
| #clock-cells = <1>; | |
| clock-output-names = "frac_1m"; | |
| }; | |
| aon_ccu: aon_ccu@35002000 { | |
| compatible = "brcm,bcm21664-aon-ccu"; | |
| reg = <0x35002000 0x0f00>; | |
| #clock-cells = <1>; | |
| clock-output-names = "hub_timer"; | |
| }; | |
| master_ccu: master_ccu@3f001000 { | |
| compatible = "brcm,bcm21664-master-ccu"; | |
| reg = <0x3f001000 0x0f00>; | |
| #clock-cells = <1>; | |
| clock-output-names = "sdio1", | |
| "sdio2", | |
| "sdio3", | |
| "sdio4", | |
| "sdio1_sleep", | |
| "sdio2_sleep", | |
| "sdio3_sleep", | |
| "sdio4_sleep"; | |
| }; | |
| slave_ccu: slave_ccu@3e011000 { | |
| compatible = "brcm,bcm21664-slave-ccu"; | |
| reg = <0x3e011000 0x0f00>; | |
| #clock-cells = <1>; | |
| clock-output-names = "uartb", | |
| "uartb2", | |
| "uartb3", | |
| "bsc1", | |
| "bsc2", | |
| "bsc3", | |
| "bsc4"; | |
| }; | |
| }; | |
| usbotg: usb@3f120000 { | |
| compatible = "snps,dwc2"; | |
| reg = <0x3f120000 0x10000>; | |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&usb_otg_ahb_clk>; | |
| clock-names = "otg"; | |
| phys = <&usbphy>; | |
| phy-names = "usb2-phy"; | |
| status = "disabled"; | |
| }; | |
| usbphy: usb-phy@3f130000 { | |
| compatible = "brcm,kona-usb2-phy"; | |
| reg = <0x3f130000 0x28>; | |
| #phy-cells = <0>; | |
| status = "disabled"; | |
| }; | |
| }; |