| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| /* | |
| * Copyright 2020-2022 Advanced Micro Devices, Inc. | |
| */ | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include "dt-bindings/interrupt-controller/arm-gic.h" | |
| / { | |
| model = "Elba ASIC Board"; | |
| compatible = "amd,pensando-elba"; | |
| interrupt-parent = <&gic>; | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| dma-coherent; | |
| ahb_clk: oscillator0 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| }; | |
| emmc_clk: oscillator2 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| }; | |
| flash_clk: oscillator3 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| }; | |
| ref_clk: oscillator4 { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| }; | |
| psci { | |
| compatible = "arm,psci-0.2"; | |
| method = "smc"; | |
| }; | |
| timer { | |
| compatible = "arm,armv8-timer"; | |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, | |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, | |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, | |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; | |
| }; | |
| pmu { | |
| compatible = "arm,cortex-a72-pmu"; | |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; | |
| }; | |
| soc: soc { | |
| compatible = "simple-bus"; | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| ranges; | |
| i2c0: i2c@400 { | |
| compatible = "snps,designware-i2c"; | |
| reg = <0x0 0x400 0x0 0x100>; | |
| clocks = <&ahb_clk>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| i2c-sda-hold-time-ns = <480>; | |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; | |
| status = "disabled"; | |
| }; | |
| wdt0: watchdog@1400 { | |
| compatible = "snps,dw-wdt"; | |
| reg = <0x0 0x1400 0x0 0x100>; | |
| clocks = <&ahb_clk>; | |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; | |
| status = "disabled"; | |
| }; | |
| qspi: spi@2400 { | |
| compatible = "amd,pensando-elba-qspi", "cdns,qspi-nor"; | |
| reg = <0x0 0x2400 0x0 0x400>, | |
| <0x0 0x7fff0000 0x0 0x1000>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&flash_clk>; | |
| cdns,fifo-depth = <1024>; | |
| cdns,fifo-width = <4>; | |
| cdns,trigger-address = <0x7fff0000>; | |
| status = "disabled"; | |
| }; | |
| spi0: spi@2800 { | |
| compatible = "amd,pensando-elba-spi"; | |
| reg = <0x0 0x2800 0x0 0x100>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| amd,pensando-elba-syscon = <&syscon>; | |
| clocks = <&ahb_clk>; | |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; | |
| num-cs = <2>; | |
| status = "disabled"; | |
| }; | |
| gpio0: gpio@4000 { | |
| compatible = "snps,dw-apb-gpio"; | |
| reg = <0x0 0x4000 0x0 0x78>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| status = "disabled"; | |
| porta: gpio-port@0 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| reg = <0>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <8>; | |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; | |
| interrupt-controller; | |
| interrupt-parent = <&gic>; | |
| #interrupt-cells = <2>; | |
| }; | |
| portb: gpio-port@1 { | |
| compatible = "snps,dw-apb-gpio-port"; | |
| reg = <1>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| ngpios = <8>; | |
| }; | |
| }; | |
| uart0: serial@4800 { | |
| compatible = "ns16550a"; | |
| reg = <0x0 0x4800 0x0 0x100>; | |
| clocks = <&ref_clk>; | |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| }; | |
| gic: interrupt-controller@800000 { | |
| compatible = "arm,gic-v3"; | |
| reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ | |
| <0x0 0xa00000 0x0 0x200000>, /* GICR */ | |
| <0x0 0x60000000 0x0 0x2000>, /* GICC */ | |
| <0x0 0x60010000 0x0 0x1000>, /* GICH */ | |
| <0x0 0x60020000 0x0 0x2000>; /* GICV */ | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| #interrupt-cells = <3>; | |
| ranges; | |
| interrupt-controller; | |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; | |
| /* | |
| * Elba specific pre-ITS is enabled using the | |
| * existing property socionext,synquacer-pre-its | |
| */ | |
| gic_its: msi-controller@820000 { | |
| compatible = "arm,gic-v3-its"; | |
| reg = <0x0 0x820000 0x0 0x10000>; | |
| msi-controller; | |
| #msi-cells = <1>; | |
| socionext,synquacer-pre-its = | |
| <0xc00000 0x1000000>; | |
| }; | |
| }; | |
| emmc: mmc@30440000 { | |
| compatible = "amd,pensando-elba-sd4hc", "cdns,sd4hc"; | |
| reg = <0x0 0x30440000 0x0 0x10000>, | |
| <0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ | |
| clocks = <&emmc_clk>; | |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; | |
| cdns,phy-input-delay-sd-highspeed = <0x4>; | |
| cdns,phy-input-delay-legacy = <0x4>; | |
| cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; | |
| cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; | |
| mmc-ddr-1_8v; | |
| status = "disabled"; | |
| }; | |
| syscon: syscon@307c0000 { | |
| compatible = "amd,pensando-elba-syscon", "syscon"; | |
| reg = <0x0 0x307c0000 0x0 0x3000>; | |
| }; | |
| }; | |
| }; |