| // SPDX-License-Identifier: BSD-3-Clause | |
| /* | |
| * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. | |
| * Copyright (c) 2019, Linaro Limited | |
| */ | |
| /dts-v1/; | |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include "sm8150.dtsi" | |
| #include "pm8150.dtsi" | |
| #include "pm8150b.dtsi" | |
| #include "pm8150l.dtsi" | |
| / { | |
| model = "Qualcomm Technologies, Inc. SM8150 MTP"; | |
| compatible = "qcom,sm8150-mtp", "qcom,sm8150"; | |
| chassis-type = "handset"; | |
| aliases { | |
| serial0 = &uart2; | |
| }; | |
| chosen { | |
| stdout-path = "serial0:115200n8"; | |
| }; | |
| vph_pwr: vph-pwr-regulator { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vph_pwr"; | |
| regulator-min-microvolt = <3700000>; | |
| regulator-max-microvolt = <3700000>; | |
| }; | |
| /* | |
| * Apparently RPMh does not provide support for PM8150 S4 because it | |
| * is always-on; model it as a fixed regulator. | |
| */ | |
| vreg_s4a_1p8: pm8150-s4 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vreg_s4a_1p8"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-always-on; | |
| regulator-boot-on; | |
| vin-supply = <&vph_pwr>; | |
| }; | |
| }; | |
| &apps_rsc { | |
| regulators-0 { | |
| compatible = "qcom,pm8150-rpmh-regulators"; | |
| qcom,pmic-id = "a"; | |
| vdd-s1-supply = <&vph_pwr>; | |
| vdd-s2-supply = <&vph_pwr>; | |
| vdd-s3-supply = <&vph_pwr>; | |
| vdd-s4-supply = <&vph_pwr>; | |
| vdd-s5-supply = <&vph_pwr>; | |
| vdd-s6-supply = <&vph_pwr>; | |
| vdd-s7-supply = <&vph_pwr>; | |
| vdd-s8-supply = <&vph_pwr>; | |
| vdd-s9-supply = <&vph_pwr>; | |
| vdd-s10-supply = <&vph_pwr>; | |
| vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; | |
| vdd-l2-l10-supply = <&vreg_bob>; | |
| vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; | |
| vdd-l6-l9-supply = <&vreg_s8c_1p3>; | |
| vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; | |
| vdd-l13-l16-l17-supply = <&vreg_bob>; | |
| vreg_s5a_2p0: smps5 { | |
| regulator-min-microvolt = <1904000>; | |
| regulator-max-microvolt = <2000000>; | |
| }; | |
| vreg_s6a_0p9: smps6 { | |
| regulator-min-microvolt = <920000>; | |
| regulator-max-microvolt = <1128000>; | |
| }; | |
| vdda_wcss_pll: | |
| vreg_l1a_0p75: ldo1 { | |
| regulator-min-microvolt = <752000>; | |
| regulator-max-microvolt = <752000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vdd_pdphy: | |
| vdda_usb_hs_3p1: | |
| vreg_l2a_3p1: ldo2 { | |
| regulator-min-microvolt = <3072000>; | |
| regulator-max-microvolt = <3072000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l3a_0p8: ldo3 { | |
| regulator-min-microvolt = <480000>; | |
| regulator-max-microvolt = <932000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vdd_usb_hs_core: | |
| vdda_csi_0_0p9: | |
| vdda_csi_1_0p9: | |
| vdda_csi_2_0p9: | |
| vdda_csi_3_0p9: | |
| vdda_dsi_0_0p9: | |
| vdda_dsi_1_0p9: | |
| vdda_dsi_0_pll_0p9: | |
| vdda_dsi_1_pll_0p9: | |
| vdda_pcie_1ln_core: | |
| vdda_pcie_2ln_core: | |
| vdda_pll_hv_cc_ebi01: | |
| vdda_pll_hv_cc_ebi23: | |
| vdda_qrefs_0p875_5: | |
| vdda_sp_sensor: | |
| vdda_ufs_2ln_core_1: | |
| vdda_ufs_2ln_core_2: | |
| vdda_usb_ss_dp_core_1: | |
| vdda_usb_ss_dp_core_2: | |
| vdda_qlink_lv: | |
| vdda_qlink_lv_ck: | |
| vreg_l5a_0p875: ldo5 { | |
| regulator-min-microvolt = <880000>; | |
| regulator-max-microvolt = <880000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l6a_1p2: ldo6 { | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <1200000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l7a_1p8: ldo7 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vddpx_10: | |
| vreg_l9a_1p2: ldo9 { | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <1200000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l10a_2p5: ldo10 { | |
| regulator-min-microvolt = <2504000>; | |
| regulator-max-microvolt = <2960000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l11a_0p8: ldo11 { | |
| regulator-min-microvolt = <800000>; | |
| regulator-max-microvolt = <800000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vdd_qfprom: | |
| vdd_qfprom_sp: | |
| vdda_apc_cs_1p8: | |
| vdda_gfx_cs_1p8: | |
| vdda_usb_hs_1p8: | |
| vdda_qrefs_vref_1p8: | |
| vddpx_10_a: | |
| vreg_l12a_1p8: ldo12 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l13a_2p7: ldo13 { | |
| regulator-min-microvolt = <2704000>; | |
| regulator-max-microvolt = <2704000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l14a_1p8: ldo14 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1880000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l15a_1p7: ldo15 { | |
| regulator-min-microvolt = <1704000>; | |
| regulator-max-microvolt = <1704000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l16a_2p7: ldo16 { | |
| regulator-min-microvolt = <2704000>; | |
| regulator-max-microvolt = <2960000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l17a_3p0: ldo17 { | |
| regulator-min-microvolt = <2856000>; | |
| regulator-max-microvolt = <3008000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| }; | |
| regulators-1 { | |
| compatible = "qcom,pm8150l-rpmh-regulators"; | |
| qcom,pmic-id = "c"; | |
| vdd-s1-supply = <&vph_pwr>; | |
| vdd-s2-supply = <&vph_pwr>; | |
| vdd-s3-supply = <&vph_pwr>; | |
| vdd-s4-supply = <&vph_pwr>; | |
| vdd-s5-supply = <&vph_pwr>; | |
| vdd-s6-supply = <&vph_pwr>; | |
| vdd-s7-supply = <&vph_pwr>; | |
| vdd-s8-supply = <&vph_pwr>; | |
| vdd-l1-l8-supply = <&vreg_s4a_1p8>; | |
| vdd-l2-l3-supply = <&vreg_s8c_1p3>; | |
| vdd-l4-l5-l6-supply = <&vreg_bob>; | |
| vdd-l7-l11-supply = <&vreg_bob>; | |
| vdd-l9-l10-supply = <&vreg_bob>; | |
| vdd-bob-supply = <&vph_pwr>; | |
| vdd-flash-supply = <&vreg_bob>; | |
| vdd-rgb-supply = <&vreg_bob>; | |
| vreg_bob: bob { | |
| regulator-min-microvolt = <3008000>; | |
| regulator-max-microvolt = <4000000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; | |
| regulator-allow-bypass; | |
| }; | |
| vreg_s8c_1p3: smps8 { | |
| regulator-min-microvolt = <1352000>; | |
| regulator-max-microvolt = <1352000>; | |
| }; | |
| vreg_l1c_1p8: ldo1 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vdda_wcss_adcdac_1: | |
| vdda_wcss_adcdac_22: | |
| vreg_l2c_1p3: ldo2 { | |
| regulator-min-microvolt = <1304000>; | |
| regulator-max-microvolt = <1304000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vdda_hv_ebi0: | |
| vdda_hv_ebi1: | |
| vdda_hv_ebi2: | |
| vdda_hv_ebi3: | |
| vdda_hv_refgen0: | |
| vdda_qlink_hv_ck: | |
| vreg_l3c_1p2: ldo3 { | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <1200000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vddpx_5: | |
| vreg_l4c_1p8: ldo4 { | |
| regulator-min-microvolt = <1704000>; | |
| regulator-max-microvolt = <2928000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vddpx_6: | |
| vreg_l5c_1p8: ldo5 { | |
| regulator-min-microvolt = <1704000>; | |
| regulator-max-microvolt = <2928000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vddpx_2: | |
| vreg_l6c_2p9: ldo6 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <2960000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l7c_3p0: ldo7 { | |
| regulator-min-microvolt = <2856000>; | |
| regulator-max-microvolt = <3104000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l8c_1p8: ldo8 { | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l9c_2p9: ldo9 { | |
| regulator-min-microvolt = <2704000>; | |
| regulator-max-microvolt = <2960000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l10c_3p3: ldo10 { | |
| regulator-min-microvolt = <3000000>; | |
| regulator-max-microvolt = <3312000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l11c_3p3: ldo11 { | |
| regulator-min-microvolt = <3000000>; | |
| regulator-max-microvolt = <3312000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| }; | |
| regulators-2 { | |
| compatible = "qcom,pm8009-rpmh-regulators"; | |
| qcom,pmic-id = "f"; | |
| vdd-s1-supply = <&vph_pwr>; | |
| vdd-s2-supply = <&vreg_bob>; | |
| vdd-l2-supply = <&vreg_s8c_1p3>; | |
| vdd-l5-l6-supply = <&vreg_bob>; | |
| vreg_l2f_1p2: ldo2 { | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <1200000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l5f_2p85: ldo5 { | |
| regulator-min-microvolt = <2800000>; | |
| regulator-max-microvolt = <2800000>; | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| }; | |
| vreg_l6f_2p85: ldo6 { | |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; | |
| regulator-min-microvolt = <2856000>; | |
| regulator-max-microvolt = <2856000>; | |
| }; | |
| }; | |
| }; | |
| &gmu { | |
| status = "okay"; | |
| }; | |
| &gpu { | |
| /* | |
| * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it | |
| * after display support is added on this board. | |
| */ | |
| compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; | |
| status = "okay"; | |
| }; | |
| &pon_pwrkey { | |
| status = "okay"; | |
| }; | |
| &pon_resin { | |
| status = "okay"; | |
| linux,code = <KEY_VOLUMEDOWN>; | |
| }; | |
| &qupv3_id_1 { | |
| status = "okay"; | |
| }; | |
| &remoteproc_adsp { | |
| status = "okay"; | |
| firmware-name = "qcom/sm8150/adsp.mdt"; | |
| }; | |
| &remoteproc_cdsp { | |
| status = "okay"; | |
| firmware-name = "qcom/sm8150/cdsp.mdt"; | |
| }; | |
| &remoteproc_mpss { | |
| status = "okay"; | |
| firmware-name = "qcom/sm8150/modem.mdt"; | |
| }; | |
| &remoteproc_slpi { | |
| status = "okay"; | |
| firmware-name = "qcom/sm8150/slpi.mdt"; | |
| }; | |
| &tlmm { | |
| gpio-reserved-ranges = <0 4>, <126 4>; | |
| }; | |
| &uart2 { | |
| status = "okay"; | |
| }; | |
| &ufs_mem_hc { | |
| status = "okay"; | |
| reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; | |
| vcc-supply = <&vreg_l10a_2p5>; | |
| vcc-max-microamp = <750000>; | |
| vccq-supply = <&vreg_l9a_1p2>; | |
| vccq-max-microamp = <700000>; | |
| vccq2-supply = <&vreg_s4a_1p8>; | |
| vccq2-max-microamp = <750000>; | |
| }; | |
| &ufs_mem_phy { | |
| status = "okay"; | |
| vdda-phy-supply = <&vdda_ufs_2ln_core_1>; | |
| vdda-pll-supply = <&vreg_l3c_1p2>; | |
| }; | |
| &usb_1_hsphy { | |
| status = "okay"; | |
| vdda-pll-supply = <&vdd_usb_hs_core>; | |
| vdda33-supply = <&vdda_usb_hs_3p1>; | |
| vdda18-supply = <&vdda_usb_hs_1p8>; | |
| }; | |
| &usb_1_qmpphy { | |
| status = "okay"; | |
| vdda-phy-supply = <&vreg_l3c_1p2>; | |
| vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; | |
| }; | |
| &usb_1 { | |
| status = "okay"; | |
| }; | |
| &usb_1_dwc3 { | |
| dr_mode = "peripheral"; | |
| }; | |
| &wifi { | |
| status = "okay"; | |
| vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>; | |
| vdd-1.8-xo-supply = <&vreg_l7a_1p8>; | |
| vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>; | |
| vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; | |
| }; |