include/configs/P1010RDB.h - u-boot - Git at Google


            
            /* SPDX-License-Identifier: GPL-2.0+ */

            
            /*

            
             * Copyright 2010-2011 Freescale Semiconductor, Inc.

            
             * Copyright 2020 NXP

            
             */


            /*

            
             * P010 RDB board configuration file

            
             */


            #ifndef __CONFIG_H

            
            #define __CONFIG_H


            #include <linux/stringify.h>


            #include <asm/config_mpc85xx.h>


            #ifdef CONFIG_SDCARD

            
            #define CFG_SYS_MMC_U_BOOT_SIZE	(512 << 10)

            
            #define CFG_SYS_MMC_U_BOOT_DST	(0x11000000)

            
            #define CFG_SYS_MMC_U_BOOT_START	(0x11000000)

            
            #define CFG_SYS_MMC_U_BOOT_OFFS	(96 << 10)

            
            #endif


            #ifdef CONFIG_SPIFLASH

            
            #ifdef CONFIG_NXP_ESBC

            
            #define CFG_RESET_VECTOR_ADDRESS	0x110bfffc

            
            #else

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE	(512 << 10)

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_OFFS	(96 << 10)

            
            #endif

            
            #endif


            #ifdef CONFIG_MTD_RAW_NAND

            
            #ifdef CONFIG_NXP_ESBC

            
            #define CFG_SYS_NAND_U_BOOT_SIZE	((768 << 10) - 0x2000)

            
            #define CFG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)

            
            #define CFG_SYS_NAND_U_BOOT_START	0x00200000

            
            #else

            
            #ifdef CONFIG_TPL_BUILD

            
            #define CFG_SYS_NAND_U_BOOT_SIZE	(576 << 10)

            
            #define CFG_SYS_NAND_U_BOOT_DST	(0x11000000)

            
            #define CFG_SYS_NAND_U_BOOT_START	(0x11000000)

            
            #elif defined(CONFIG_SPL_BUILD)

            
            #define CFG_SYS_NAND_U_BOOT_SIZE	(128 << 10)

            
            #define CFG_SYS_NAND_U_BOOT_DST	0xD0000000

            
            #define CFG_SYS_NAND_U_BOOT_START	0xD0000000

            
            #endif

            
            #endif

            
            #endif


            #ifdef CONFIG_NAND_SECBOOT	/* NAND Boot */

            
            #define CFG_RESET_VECTOR_ADDRESS	0x110bfffc

            
            #endif


            #ifndef CFG_RESET_VECTOR_ADDRESS

            
            #define CFG_RESET_VECTOR_ADDRESS	0xeffffffc

            
            #endif


            /* High Level Configuration Options */


            #if defined(CONFIG_PCI)

            
            /*

            
             * PCI Windows

            
             * Memory space is mapped 1-1, but I/O space must start from 0.

            
             */

            
            /* controller 1, Slot 1, tgtid 1, Base address a000 */

            
            #define CFG_SYS_PCIE1_MEM_VIRT	0x80000000

            
            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_PCIE1_MEM_PHYS	0xc00000000ull

            
            #else

            
            #define CFG_SYS_PCIE1_MEM_PHYS	0x80000000

            
            #endif

            
            #define CFG_SYS_PCIE1_IO_VIRT	0xffc00000

            
            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_PCIE1_IO_PHYS	0xfffc00000ull

            
            #else

            
            #define CFG_SYS_PCIE1_IO_PHYS	0xffc00000

            
            #endif


            /* controller 2, Slot 2, tgtid 2, Base address 9000 */

            
            #define CFG_SYS_PCIE2_MEM_VIRT	0xa0000000

            
            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_PCIE2_MEM_PHYS	0xc20000000ull

            
            #else

            
            #define CFG_SYS_PCIE2_MEM_PHYS	0xa0000000

            
            #endif

            
            #define CFG_SYS_PCIE2_IO_VIRT	0xffc10000

            
            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_PCIE2_IO_PHYS	0xfffc10000ull

            
            #else

            
            #define CFG_SYS_PCIE2_IO_PHYS	0xffc10000

            
            #endif

            
            #endif


            /* DDR Setup */

            
            #define SPD_EEPROM_ADDRESS		0x52


            #ifndef __ASSEMBLY__

            
            extern unsigned long get_sdram_size(void);

            
            #endif

            
            #define CFG_SYS_SDRAM_SIZE		get_sdram_size() /* DDR size */

            
            #define CFG_SYS_DDR_SDRAM_BASE	0x00000000

            
            #define CFG_SYS_SDRAM_BASE		CFG_SYS_DDR_SDRAM_BASE


            #define CFG_SYS_CCSRBAR			0xffe00000

            
            #define CFG_SYS_CCSRBAR_PHYS_LOW		CFG_SYS_CCSRBAR


            /*

            
             * Memory map

            
             *

            
             * 0x0000_0000	0x3fff_ffff	DDR			1G cacheable

            
             * 0x8000_0000  0xbfff_ffff	PCI Express Mem		1.5G non-cacheable

            
             * 0xffc0_0000  0xffc3_ffff	PCI IO range		256k non-cacheable

            
             *

            
             * Localbus non-cacheable

            
             * 0xff80_0000	0xff8f_ffff	NAND Flash		1M non-cacheable

            
             * 0xffb0_0000	0xffbf_ffff	Board CPLD		1M non-cacheable

            
             * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0

            
             * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable

            
             */


            /*

            
             * IFC Definitions

            
             */

            
            /* NOR Flash on IFC */


            #define CFG_SYS_FLASH_BASE		0xee000000


            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CFG_SYS_FLASH_BASE)

            
            #else

            
            #define CFG_SYS_FLASH_BASE_PHYS	CFG_SYS_FLASH_BASE

            
            #endif


            #define CFG_SYS_NOR_CSPR	(CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \

            
            				CSPR_PORT_SIZE_16 | \

            
            				CSPR_MSEL_NOR | \

            
            				CSPR_V)

            
            #define CFG_SYS_NOR_AMASK	IFC_AMASK(32*1024*1024)

            
            #define CFG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(7)

            
            /* NOR Flash Timing Params */

            
            #define CFG_SYS_NOR_FTIM0	FTIM0_NOR_TACSE(0x4) | \

            
            				FTIM0_NOR_TEADC(0x5) | \

            
            				FTIM0_NOR_TEAHC(0x5)

            
            #define CFG_SYS_NOR_FTIM1	FTIM1_NOR_TACO(0x1e) | \

            
            				FTIM1_NOR_TRAD_NOR(0x0f)

            
            #define CFG_SYS_NOR_FTIM2	FTIM2_NOR_TCS(0x4) | \

            
            				FTIM2_NOR_TCH(0x4) | \

            
            				FTIM2_NOR_TWP(0x1c)

            
            #define CFG_SYS_NOR_FTIM3	0x0


            #define CFG_SYS_FLASH_BANKS_LIST	{CFG_SYS_FLASH_BASE_PHYS}


            /* CFI for NOR Flash */


            /* NAND Flash on IFC */

            
            #define CFG_SYS_NAND_BASE		0xff800000

            
            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_NAND_BASE_PHYS	0xfff800000ull

            
            #else

            
            #define CFG_SYS_NAND_BASE_PHYS	CFG_SYS_NAND_BASE

            
            #endif


            #define CFG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \

            
            				| CSPR_PORT_SIZE_8	\

            
            				| CSPR_MSEL_NAND	\

            
            				| CSPR_V)

            
            #define CFG_SYS_NAND_AMASK	IFC_AMASK(64*1024)


            #if defined(CONFIG_TARGET_P1010RDB_PA)

            
            #define CFG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \

            
            				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \

            
            				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \

            
            				| CSOR_NAND_RAL_2	/* RAL = 2 Bytes */ \

            
            				| CSOR_NAND_PGS_512	/* Page Size = 512b */ \

            
            				| CSOR_NAND_SPRZ_16	/* Spare size = 16 */ \

            
            				| CSOR_NAND_PB(32))	/* 32 Pages Per Block */


            #elif defined(CONFIG_TARGET_P1010RDB_PB)

            
            #define CFG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \

            
            				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \

            
            				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \

            
            				| CSOR_NAND_RAL_3       /* RAL = 3Byes */ \

            
            				| CSOR_NAND_PGS_4K      /* Page Size = 4K */ \

            
            				| CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \

            
            				| CSOR_NAND_PB(128))  /*Pages Per Block = 128 */

            
            #endif


            #define CFG_SYS_NAND_BASE_LIST	{ CFG_SYS_NAND_BASE }


            #if defined(CONFIG_TARGET_P1010RDB_PA)

            
            /* NAND Flash Timing Params */

            
            #define CFG_SYS_NAND_FTIM0		FTIM0_NAND_TCCST(0x01) | \

            
            					FTIM0_NAND_TWP(0x0C)   | \

            
            					FTIM0_NAND_TWCHT(0x04) | \

            
            					FTIM0_NAND_TWH(0x05)

            
            #define CFG_SYS_NAND_FTIM1		FTIM1_NAND_TADLE(0x1d) | \

            
            					FTIM1_NAND_TWBE(0x1d)  | \

            
            					FTIM1_NAND_TRR(0x07)   | \

            
            					FTIM1_NAND_TRP(0x0c)

            
            #define CFG_SYS_NAND_FTIM2		FTIM2_NAND_TRAD(0x0c) | \

            
            					FTIM2_NAND_TREH(0x05) | \

            
            					FTIM2_NAND_TWHRE(0x0f)

            
            #define CFG_SYS_NAND_FTIM3		FTIM3_NAND_TWW(0x04)


            #elif defined(CONFIG_TARGET_P1010RDB_PB)

            
            /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */

            
            /* ONFI NAND Flash mode0 Timing Params */

            
            #define CFG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \

            
            					FTIM0_NAND_TWP(0x18)   | \

            
            					FTIM0_NAND_TWCHT(0x07) | \

            
            					FTIM0_NAND_TWH(0x0a))

            
            #define CFG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \

            
            					FTIM1_NAND_TWBE(0x39)  | \

            
            					FTIM1_NAND_TRR(0x0e)   | \

            
            					FTIM1_NAND_TRP(0x18))

            
            #define CFG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \

            
            					FTIM2_NAND_TREH(0x0a)  | \

            
            					FTIM2_NAND_TWHRE(0x1e))

            
            #define CFG_SYS_NAND_FTIM3	0x0

            
            #endif


            /* Set up IFC registers for boot location NOR/NAND */

            
            #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)

            
            #define CFG_SYS_CSPR0		CFG_SYS_NAND_CSPR

            
            #define CFG_SYS_AMASK0		CFG_SYS_NAND_AMASK

            
            #define CFG_SYS_CSOR0		CFG_SYS_NAND_CSOR

            
            #define CFG_SYS_CS0_FTIM0		CFG_SYS_NAND_FTIM0

            
            #define CFG_SYS_CS0_FTIM1		CFG_SYS_NAND_FTIM1

            
            #define CFG_SYS_CS0_FTIM2		CFG_SYS_NAND_FTIM2

            
            #define CFG_SYS_CS0_FTIM3		CFG_SYS_NAND_FTIM3

            
            #define CFG_SYS_CSPR1		CFG_SYS_NOR_CSPR

            
            #define CFG_SYS_AMASK1		CFG_SYS_NOR_AMASK

            
            #define CFG_SYS_CSOR1		CFG_SYS_NOR_CSOR

            
            #define CFG_SYS_CS1_FTIM0		CFG_SYS_NOR_FTIM0

            
            #define CFG_SYS_CS1_FTIM1		CFG_SYS_NOR_FTIM1

            
            #define CFG_SYS_CS1_FTIM2		CFG_SYS_NOR_FTIM2

            
            #define CFG_SYS_CS1_FTIM3		CFG_SYS_NOR_FTIM3

            
            #else

            
            #define CFG_SYS_CSPR0		CFG_SYS_NOR_CSPR

            
            #define CFG_SYS_AMASK0		CFG_SYS_NOR_AMASK

            
            #define CFG_SYS_CSOR0		CFG_SYS_NOR_CSOR

            
            #define CFG_SYS_CS0_FTIM0		CFG_SYS_NOR_FTIM0

            
            #define CFG_SYS_CS0_FTIM1		CFG_SYS_NOR_FTIM1

            
            #define CFG_SYS_CS0_FTIM2		CFG_SYS_NOR_FTIM2

            
            #define CFG_SYS_CS0_FTIM3		CFG_SYS_NOR_FTIM3

            
            #define CFG_SYS_CSPR1		CFG_SYS_NAND_CSPR

            
            #define CFG_SYS_AMASK1		CFG_SYS_NAND_AMASK

            
            #define CFG_SYS_CSOR1		CFG_SYS_NAND_CSOR

            
            #define CFG_SYS_CS1_FTIM0		CFG_SYS_NAND_FTIM0

            
            #define CFG_SYS_CS1_FTIM1		CFG_SYS_NAND_FTIM1

            
            #define CFG_SYS_CS1_FTIM2		CFG_SYS_NAND_FTIM2

            
            #define CFG_SYS_CS1_FTIM3		CFG_SYS_NAND_FTIM3

            
            #endif


            /* CPLD on IFC */

            
            #define CFG_SYS_CPLD_BASE		0xffb00000


            #ifdef CONFIG_PHYS_64BIT

            
            #define CFG_SYS_CPLD_BASE_PHYS	0xfffb00000ull

            
            #else

            
            #define CFG_SYS_CPLD_BASE_PHYS	CFG_SYS_CPLD_BASE

            
            #endif


            #define CFG_SYS_CSPR3	(CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \

            
            				| CSPR_PORT_SIZE_8 \

            
            				| CSPR_MSEL_GPCM \

            
            				| CSPR_V)

            
            #define CFG_SYS_AMASK3		IFC_AMASK(64*1024)

            
            #define CFG_SYS_CSOR3		0x0

            
            /* CPLD Timing parameters for IFC CS3 */

            
            #define CFG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \

            
            					FTIM0_GPCM_TEADC(0x0e) | \

            
            					FTIM0_GPCM_TEAHC(0x0e))

            
            #define CFG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \

            
            					FTIM1_GPCM_TRAD(0x1f))

            
            #define CFG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \

            
            					FTIM2_GPCM_TCH(0x8) | \

            
            					FTIM2_GPCM_TWP(0x1f))

            
            #define CFG_SYS_CS3_FTIM3		0x0


            #define CFG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */

            
            #define CFG_SYS_INIT_RAM_SIZE	0x00004000 /* End of used area in RAM */


            #define CFG_SYS_INIT_SP_OFFSET	(CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)


            /*

            
             * Config the L2 Cache as L2 SRAM

            
             */

            
            #if defined(CONFIG_SPL_BUILD)

            
            #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)

            
            #define CFG_SYS_INIT_L2_ADDR		0xD0000000

            
            #define CFG_SYS_INIT_L2_ADDR_PHYS	CFG_SYS_INIT_L2_ADDR

            
            #define CFG_SYS_INIT_L2_END	(CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)

            
            #elif defined(CONFIG_MTD_RAW_NAND)

            
            #ifdef CONFIG_TPL_BUILD

            
            #define CFG_SYS_INIT_L2_ADDR		0xD0000000

            
            #define CFG_SYS_INIT_L2_ADDR_PHYS	CFG_SYS_INIT_L2_ADDR

            
            #define CFG_SYS_INIT_L2_END	(CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)

            
            #else

            
            #define CFG_SYS_INIT_L2_ADDR		0xD0000000

            
            #define CFG_SYS_INIT_L2_ADDR_PHYS	CFG_SYS_INIT_L2_ADDR

            
            #define CFG_SYS_INIT_L2_END	(CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)

            
            #endif

            
            #endif

            
            #endif


            /* Serial Port */

            
            #define CFG_SYS_NS16550_CLK		get_bus_freq(0)


            #define CFG_SYS_BAUDRATE_TABLE	\

            
            	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}


            #define CFG_SYS_NS16550_COM1	(CFG_SYS_CCSRBAR+0x4500)

            
            #define CFG_SYS_NS16550_COM2	(CFG_SYS_CCSRBAR+0x4600)


            /* I2C */

            
            #define I2C_PCA9557_ADDR1		0x18

            
            #define I2C_PCA9557_ADDR2		0x19

            
            #define I2C_PCA9557_BUS_NUM		0


            /* I2C EEPROM */

            
            #if defined(CONFIG_TARGET_P1010RDB_PB)

            
            #define MAX_NUM_PORTS			9 /* for 128Bytes EEPROM */

            
            #endif

            
            /* enable read and write access to EEPROM */


            /* RTC */

            
            #define CFG_SYS_I2C_RTC_ADDR	0x68


            /*

            
             * SPI interface will not be available in case of NAND boot SPI CS0 will be

            
             * used for SLIC

            
             */

            
            #if !defined(CONFIG_MTD_RAW_NAND) || !defined(CONFIG_NAND_SECBOOT)

            
            /* eSPI - Enhanced SPI */

            
            #endif


            #ifdef CONFIG_MMC

            
            #define CFG_SYS_FSL_ESDHC_ADDR	CFG_SYS_MPC85xx_ESDHC_ADDR

            
            #endif


            /*

            
             * Environment

            
             */

            
            #if defined(CONFIG_MTD_RAW_NAND)

            
            #ifdef CONFIG_TPL_BUILD

            
            #define SPL_ENV_ADDR		(CFG_SYS_INIT_L2_ADDR + (160 << 10))

            
            #endif

            
            #endif


            #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \

            
            		 || defined(CONFIG_FSL_SATA)

            
            #endif


            /*

            
             * Miscellaneous configurable options

            
             */


            /*

            
             * For booting Linux, the board info and command line data

            
             * have to be in the first 64 MB of memory, since this is

            
             * the maximum mapped by the Linux kernel during initialization.

            
             */

            
            #define CFG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */


            /*

            
             * Environment Configuration

            
             */


            #define	CFG_EXTRA_ENV_SETTINGS				\

            
            	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"	\

            
            	"netdev=eth0\0"						\

            
            	"uboot=" CONFIG_UBOOTPATH "\0"		\

            
            	"loadaddr=1000000\0"			\

            
            	"consoledev=ttyS0\0"				\

            
            	"ramdiskaddr=2000000\0"			\

            
            	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\

            
            	"fdtaddr=1e00000\0"				\

            
            	"fdtfile=p1010rdb.dtb\0"		\

            
            	"bdev=sda1\0"	\

            
            	"hwconfig=usb1:dr_mode=host,phy_type=utmi\0"	\

            
            	"othbootargs=ramdisk_size=600000\0" \

            
            	"usbfatboot=setenv bootargs root=/dev/ram rw "	\

            
            	"console=$consoledev,$baudrate $othbootargs; "	\

            
            	"usb start;"			\

            
            	"fatload usb 0:2 $loadaddr $bootfile;"		\

            
            	"fatload usb 0:2 $fdtaddr $fdtfile;"	\

            
            	"fatload usb 0:2 $ramdiskaddr $ramdiskfile;"	\

            
            	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"		\

            
            	"usbext2boot=setenv bootargs root=/dev/ram rw "	\

            
            	"console=$consoledev,$baudrate $othbootargs; "	\

            
            	"usb start;"			\

            
            	"ext2load usb 0:4 $loadaddr $bootfile;"		\

            
            	"ext2load usb 0:4 $fdtaddr $fdtfile;"	\

            
            	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"	\

            
            	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"	\

            
            	BOOTMODE


            #if defined(CONFIG_TARGET_P1010RDB_PA)

            
            #define BOOTMODE \

            
            	"boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \

            
            	"mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \

            
            	"boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \

            
            	"mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \

            
            	"boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \

            
            	"mw.b ffb00011 0; mw.b ffb00017 1; reset\0"


            #elif defined(CONFIG_TARGET_P1010RDB_PB)

            
            #define BOOTMODE \

            
            	"boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \

            
            	"i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \

            
            	"boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \

            
            	"i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \

            
            	"boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \

            
            	"i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \

            
            	"boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \

            
            	"i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \

            
            	"boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \

            
            	"i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"

            
            #endif


            #include <asm/fsl_secure_boot.h>


            #endif	/* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2010-2011 Freescale Semiconductor, Inc.
	* Copyright 2020 NXP
	*/

	/*
	* P010 RDB board configuration file
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <linux/stringify.h>

	#include <asm/config_mpc85xx.h>

	#ifdef CONFIG_SDCARD
	#define CFG_SYS_MMC_U_BOOT_SIZE (512 << 10)
	#define CFG_SYS_MMC_U_BOOT_DST (0x11000000)
	#define CFG_SYS_MMC_U_BOOT_START (0x11000000)
	#define CFG_SYS_MMC_U_BOOT_OFFS (96 << 10)
	#endif

	#ifdef CONFIG_SPIFLASH
	#ifdef CONFIG_NXP_ESBC
	#define CFG_RESET_VECTOR_ADDRESS 0x110bfffc
	#else
	#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
	#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
	#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
	#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10)
	#endif
	#endif

	#ifdef CONFIG_MTD_RAW_NAND
	#ifdef CONFIG_NXP_ESBC
	#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
	#define CFG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
	#define CFG_SYS_NAND_U_BOOT_START 0x00200000
	#else
	#ifdef CONFIG_TPL_BUILD
	#define CFG_SYS_NAND_U_BOOT_SIZE (576 << 10)
	#define CFG_SYS_NAND_U_BOOT_DST (0x11000000)
	#define CFG_SYS_NAND_U_BOOT_START (0x11000000)
	#elif defined(CONFIG_SPL_BUILD)
	#define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10)
	#define CFG_SYS_NAND_U_BOOT_DST 0xD0000000
	#define CFG_SYS_NAND_U_BOOT_START 0xD0000000
	#endif
	#endif
	#endif

	#ifdef CONFIG_NAND_SECBOOT /* NAND Boot */
	#define CFG_RESET_VECTOR_ADDRESS 0x110bfffc
	#endif

	#ifndef CFG_RESET_VECTOR_ADDRESS
	#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc
	#endif

	/* High Level Configuration Options */

	#if defined(CONFIG_PCI)
	/*
	* PCI Windows
	* Memory space is mapped 1-1, but I/O space must start from 0.
	*/
	/* controller 1, Slot 1, tgtid 1, Base address a000 */
	#define CFG_SYS_PCIE1_MEM_VIRT 0x80000000
	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
	#else
	#define CFG_SYS_PCIE1_MEM_PHYS 0x80000000
	#endif
	#define CFG_SYS_PCIE1_IO_VIRT 0xffc00000
	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
	#else
	#define CFG_SYS_PCIE1_IO_PHYS 0xffc00000
	#endif

	/* controller 2, Slot 2, tgtid 2, Base address 9000 */
	#define CFG_SYS_PCIE2_MEM_VIRT 0xa0000000
	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
	#else
	#define CFG_SYS_PCIE2_MEM_PHYS 0xa0000000
	#endif
	#define CFG_SYS_PCIE2_IO_VIRT 0xffc10000
	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
	#else
	#define CFG_SYS_PCIE2_IO_PHYS 0xffc10000
	#endif
	#endif

	/* DDR Setup */
	#define SPD_EEPROM_ADDRESS 0x52

	#ifndef __ASSEMBLY__
	extern unsigned long get_sdram_size(void);
	#endif
	#define CFG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
	#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
	#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE

	#define CFG_SYS_CCSRBAR 0xffe00000
	#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR

	/*
	* Memory map
	*
	* 0x0000_0000 0x3fff_ffff DDR 1G cacheable
	* 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable
	* 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
	*
	* Localbus non-cacheable
	* 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable
	* 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable
	* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
	* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
	*/

	/*
	* IFC Definitions
	*/
	/* NOR Flash on IFC */

	#define CFG_SYS_FLASH_BASE 0xee000000

	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull \| CFG_SYS_FLASH_BASE)
	#else
	#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
	#endif

	#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) \| \
	CSPR_PORT_SIZE_16 \| \
	CSPR_MSEL_NOR \| \
	CSPR_V)
	#define CFG_SYS_NOR_AMASK IFC_AMASK(3210241024)
	#define CFG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7)
	/* NOR Flash Timing Params */
	#define CFG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) \| \
	FTIM0_NOR_TEADC(0x5) \| \
	FTIM0_NOR_TEAHC(0x5)
	#define CFG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) \| \
	FTIM1_NOR_TRAD_NOR(0x0f)
	#define CFG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) \| \
	FTIM2_NOR_TCH(0x4) \| \
	FTIM2_NOR_TWP(0x1c)
	#define CFG_SYS_NOR_FTIM3 0x0

	#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS}

	/* CFI for NOR Flash */

	/* NAND Flash on IFC */
	#define CFG_SYS_NAND_BASE 0xff800000
	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_NAND_BASE_PHYS 0xfff800000ull
	#else
	#define CFG_SYS_NAND_BASE_PHYS CFG_SYS_NAND_BASE
	#endif

	#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
	\| CSPR_PORT_SIZE_8 \
	\| CSPR_MSEL_NAND \
	\| CSPR_V)
	#define CFG_SYS_NAND_AMASK IFC_AMASK(64*1024)

	#if defined(CONFIG_TARGET_P1010RDB_PA)
	#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
	\| CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
	\| CSOR_NAND_PGS_512 /* Page Size = 512b */ \
	\| CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \
	\| CSOR_NAND_PB(32)) /* 32 Pages Per Block */

	#elif defined(CONFIG_TARGET_P1010RDB_PB)
	#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
	\| CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
	\| CSOR_NAND_PGS_4K /* Page Size = 4K */ \
	\| CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
	\| CSOR_NAND_PB(128)) /Pages Per Block = 128 /
	#endif

	#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }

	#if defined(CONFIG_TARGET_P1010RDB_PA)
	/* NAND Flash Timing Params */
	#define CFG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) \| \
	FTIM0_NAND_TWP(0x0C) \| \
	FTIM0_NAND_TWCHT(0x04) \| \
	FTIM0_NAND_TWH(0x05)
	#define CFG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) \| \
	FTIM1_NAND_TWBE(0x1d) \| \
	FTIM1_NAND_TRR(0x07) \| \
	FTIM1_NAND_TRP(0x0c)
	#define CFG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) \| \
	FTIM2_NAND_TREH(0x05) \| \
	FTIM2_NAND_TWHRE(0x0f)
	#define CFG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)

	#elif defined(CONFIG_TARGET_P1010RDB_PB)
	/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
	/* ONFI NAND Flash mode0 Timing Params */
	#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)\| \
	FTIM0_NAND_TWP(0x18) \| \
	FTIM0_NAND_TWCHT(0x07) \| \
	FTIM0_NAND_TWH(0x0a))
	#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)\| \
	FTIM1_NAND_TWBE(0x39) \| \
	FTIM1_NAND_TRR(0x0e) \| \
	FTIM1_NAND_TRP(0x18))
	#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) \| \
	FTIM2_NAND_TREH(0x0a) \| \
	FTIM2_NAND_TWHRE(0x1e))
	#define CFG_SYS_NAND_FTIM3 0x0
	#endif

	/* Set up IFC registers for boot location NOR/NAND */
	#if defined(CONFIG_MTD_RAW_NAND) \|\| defined(CONFIG_NAND_SECBOOT)
	#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR
	#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK
	#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR
	#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0
	#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1
	#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2
	#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3
	#define CFG_SYS_CSPR1 CFG_SYS_NOR_CSPR
	#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK
	#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR
	#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0
	#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1
	#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2
	#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3
	#else
	#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR
	#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
	#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
	#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
	#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
	#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
	#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
	#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR
	#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK
	#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR
	#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
	#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
	#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
	#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
	#endif

	/* CPLD on IFC */
	#define CFG_SYS_CPLD_BASE 0xffb00000

	#ifdef CONFIG_PHYS_64BIT
	#define CFG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
	#else
	#define CFG_SYS_CPLD_BASE_PHYS CFG_SYS_CPLD_BASE
	#endif

	#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \
	\| CSPR_PORT_SIZE_8 \
	\| CSPR_MSEL_GPCM \
	\| CSPR_V)
	#define CFG_SYS_AMASK3 IFC_AMASK(64*1024)
	#define CFG_SYS_CSOR3 0x0
	/* CPLD Timing parameters for IFC CS3 */
	#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) \| \
	FTIM0_GPCM_TEADC(0x0e) \| \
	FTIM0_GPCM_TEAHC(0x0e))
	#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) \| \
	FTIM1_GPCM_TRAD(0x1f))
	#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) \| \
	FTIM2_GPCM_TCH(0x8) \| \
	FTIM2_GPCM_TWP(0x1f))
	#define CFG_SYS_CS3_FTIM3 0x0

	#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
	#define CFG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */

	#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

	/*
	* Config the L2 Cache as L2 SRAM
	*/
	#if defined(CONFIG_SPL_BUILD)
	#if defined(CONFIG_SDCARD) \|\| defined(CONFIG_SPIFLASH)
	#define CFG_SYS_INIT_L2_ADDR 0xD0000000
	#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
	#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
	#elif defined(CONFIG_MTD_RAW_NAND)
	#ifdef CONFIG_TPL_BUILD
	#define CFG_SYS_INIT_L2_ADDR 0xD0000000
	#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
	#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
	#else
	#define CFG_SYS_INIT_L2_ADDR 0xD0000000
	#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
	#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
	#endif
	#endif
	#endif

	/* Serial Port */
	#define CFG_SYS_NS16550_CLK get_bus_freq(0)

	#define CFG_SYS_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

	#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x4500)
	#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x4600)

	/* I2C */
	#define I2C_PCA9557_ADDR1 0x18
	#define I2C_PCA9557_ADDR2 0x19
	#define I2C_PCA9557_BUS_NUM 0

	/* I2C EEPROM */
	#if defined(CONFIG_TARGET_P1010RDB_PB)
	#define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */
	#endif
	/* enable read and write access to EEPROM */

	/* RTC */
	#define CFG_SYS_I2C_RTC_ADDR 0x68

	/*
	* SPI interface will not be available in case of NAND boot SPI CS0 will be
	* used for SLIC
	*/
	#if !defined(CONFIG_MTD_RAW_NAND) \|\| !defined(CONFIG_NAND_SECBOOT)
	/* eSPI - Enhanced SPI */
	#endif

	#ifdef CONFIG_MMC
	#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
	#endif

	/*
	* Environment
	*/
	#if defined(CONFIG_MTD_RAW_NAND)
	#ifdef CONFIG_TPL_BUILD
	#define SPL_ENV_ADDR (CFG_SYS_INIT_L2_ADDR + (160 << 10))
	#endif
	#endif

	#if defined(CONFIG_MMC) \|\| defined(CONFIG_USB_EHCI_HCD) \
	\|\| defined(CONFIG_FSL_SATA)
	#endif

	/*
	* Miscellaneous configurable options
	*/

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 64 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */

	/*
	* Environment Configuration
	*/

	#define CFG_EXTRA_ENV_SETTINGS \
	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
	"netdev=eth0\0" \
	"uboot=" CONFIG_UBOOTPATH "\0" \
	"loadaddr=1000000\0" \
	"consoledev=ttyS0\0" \
	"ramdiskaddr=2000000\0" \
	"ramdiskfile=rootfs.ext2.gz.uboot\0" \
	"fdtaddr=1e00000\0" \
	"fdtfile=p1010rdb.dtb\0" \
	"bdev=sda1\0" \
	"hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \
	"othbootargs=ramdisk_size=600000\0" \
	"usbfatboot=setenv bootargs root=/dev/ram rw " \
	"console=$consoledev,$baudrate $othbootargs; " \
	"usb start;" \
	"fatload usb 0:2 $loadaddr $bootfile;" \
	"fatload usb 0:2 $fdtaddr $fdtfile;" \
	"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
	"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
	"usbext2boot=setenv bootargs root=/dev/ram rw " \
	"console=$consoledev,$baudrate $othbootargs; " \
	"usb start;" \
	"ext2load usb 0:4 $loadaddr $bootfile;" \
	"ext2load usb 0:4 $fdtaddr $fdtfile;" \
	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
	"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
	BOOTMODE

	#if defined(CONFIG_TARGET_P1010RDB_PA)
	#define BOOTMODE \
	"boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
	"mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
	"boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
	"mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
	"boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
	"mw.b ffb00011 0; mw.b ffb00017 1; reset\0"

	#elif defined(CONFIG_TARGET_P1010RDB_PB)
	#define BOOTMODE \
	"boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
	"i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
	"boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
	"i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
	"boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
	"i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
	"boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
	"i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
	"boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
	"i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
	#endif

	#include <asm/fsl_secure_boot.h>

	#endif /* __CONFIG_H */