include/configs/T208xRDB.h - u-boot - Git at Google


            
            /* SPDX-License-Identifier: GPL-2.0+ */

            
            /*

            
             * Copyright 2014 Freescale Semiconductor, Inc.

            
             * Copyright 2020-2023 NXP

            
             */


            /*

            
             * T2080 RDB/PCIe board configuration file

            
             */


            #ifndef __T2080RDB_H

            
            #define __T2080RDB_H


            #include <linux/stringify.h>


            #define CFG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */


            /* High Level Configuration Options */


            #define CFG_SYS_NUM_CPC	CONFIG_SYS_NUM_DDR_CTLRS


            #ifdef CONFIG_RAMBOOT_PBL

            
            #define RESET_VECTOR_OFFSET		0x27FFC

            
            #define BOOT_PAGE_OFFSET		0x27000


            #ifdef CONFIG_MTD_RAW_NAND

            
            #define CFG_SYS_NAND_U_BOOT_SIZE	(768 << 10)

            
            #define CFG_SYS_NAND_U_BOOT_DST	0x00200000

            
            #define CFG_SYS_NAND_U_BOOT_START	0x00200000

            
            #endif


            #ifdef CONFIG_SPIFLASH

            
            #define        CFG_RESET_VECTOR_ADDRESS             0x200FFC

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)

            
            #define CFG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)

            
            #endif


            #ifdef CONFIG_SDCARD

            
            #define        CFG_RESET_VECTOR_ADDRESS             0x200FFC

            
            #define CFG_SYS_MMC_U_BOOT_SIZE     (768 << 10)

            
            #define CFG_SYS_MMC_U_BOOT_DST      (0x00200000)

            
            #define CFG_SYS_MMC_U_BOOT_START    (0x00200000)

            
            #define CFG_SYS_MMC_U_BOOT_OFFS     (260 << 10)

            
            #endif


            #endif /* CONFIG_RAMBOOT_PBL */


            #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE

            
            /* Set 1M boot space */

            
            #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)

            
            #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \

            
            		(0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)

            
            #define CFG_RESET_VECTOR_ADDRESS 0xfffffffc

            
            #endif


            #ifndef CFG_RESET_VECTOR_ADDRESS

            
            #define CFG_RESET_VECTOR_ADDRESS	0xeffffffc

            
            #endif


            /*

            
             * Config the L3 Cache as L3 SRAM

            
             */

            
            #define CFG_SYS_INIT_L3_ADDR		0xFFFC0000

            
            #define SPL_ENV_ADDR			(CONFIG_SPL_GD_ADDR + 4 * 1024)


            #define CFG_SYS_DCSRBAR	0xf0000000

            
            #define CFG_SYS_DCSRBAR_PHYS	0xf00000000ull


            /*

            
             * DDR Setup

            
             */

            
            #define CFG_SYS_DDR_SDRAM_BASE	0x00000000

            
            #define CFG_SYS_SDRAM_BASE		CFG_SYS_DDR_SDRAM_BASE

            
            #define CFG_SYS_SDRAM_SIZE	2048	/* for fixed parameter use */

            
            #define SPD_EEPROM_ADDRESS1	0x51

            
            #define SPD_EEPROM_ADDRESS2	0x52

            
            #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1

            
            #define CTRL_INTLV_PREFERED	cacheline


            /*

            
             * IFC Definitions

            
             */

            
            #define CFG_SYS_FLASH_BASE		0xe8000000

            
            #define CFG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CFG_SYS_FLASH_BASE)

            
            #define CFG_SYS_NOR0_CSPR_EXT	(0xf)

            
            #define CFG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \

            
            				CSPR_PORT_SIZE_16 | \

            
            				CSPR_MSEL_NOR | \

            
            				CSPR_V)

            
            #define CFG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)


            /* NOR Flash Timing Params */

            
            #define CFG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80


            #define CFG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \

            
            				FTIM0_NOR_TEADC(0x5) | \

            
            				FTIM0_NOR_TEAHC(0x5))

            
            #define CFG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \

            
            				FTIM1_NOR_TRAD_NOR(0x1A) |\

            
            				FTIM1_NOR_TSEQRAD_NOR(0x13))

            
            #define CFG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \

            
            				FTIM2_NOR_TCH(0x4) | \

            
            				FTIM2_NOR_TWPH(0x0E) | \

            
            				FTIM2_NOR_TWP(0x1c))

            
            #define CFG_SYS_NOR_FTIM3	0x0


            #define CFG_SYS_FLASH_BANKS_LIST	{CFG_SYS_FLASH_BASE_PHYS }


            /* CPLD on IFC */

            
            #define CFG_SYS_CPLD_BASE	0xffdf0000

            
            #define CFG_SYS_CPLD_BASE_PHYS	(0xf00000000ull | CFG_SYS_CPLD_BASE)

            
            #define CFG_SYS_CSPR2_EXT	(0xf)

            
            #define CFG_SYS_CSPR2	(CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE) \

            
            				| CSPR_PORT_SIZE_8 \

            
            				| CSPR_MSEL_GPCM \

            
            				| CSPR_V)

            
            #define CFG_SYS_AMASK2	IFC_AMASK(64*1024)

            
            #define CFG_SYS_CSOR2	0x0


            /* CPLD Timing parameters for IFC CS2 */

            
            #define CFG_SYS_CS2_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \

            
            					FTIM0_GPCM_TEADC(0x0e) | \

            
            					FTIM0_GPCM_TEAHC(0x0e))

            
            #define CFG_SYS_CS2_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \

            
            					FTIM1_GPCM_TRAD(0x1f))

            
            #define CFG_SYS_CS2_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \

            
            					FTIM2_GPCM_TCH(0x8) | \

            
            					FTIM2_GPCM_TWP(0x1f))

            
            #define CFG_SYS_CS2_FTIM3		0x0


            /* NAND Flash on IFC */

            
            #define CFG_SYS_NAND_BASE		0xff800000

            
            #define CFG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CFG_SYS_NAND_BASE)


            #define CFG_SYS_NAND_CSPR_EXT	(0xf)

            
            #define CFG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \

            
            				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \

            
            				| CSPR_MSEL_NAND	 /* MSEL = NAND */ \

            
            				| CSPR_V)

            
            #define CFG_SYS_NAND_AMASK	IFC_AMASK(64*1024)


            #define CFG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \

            
            				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \

            
            				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */	    \

            
            				| CSOR_NAND_RAL_3	/* RAL = 2Byes */   \

            
            				| CSOR_NAND_PGS_2K	/* Page Size = 2K */\

            
            				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */\

            
            				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/


            /* ONFI NAND Flash mode0 Timing Params */

            
            #define CFG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \

            
            					FTIM0_NAND_TWP(0x18)    | \

            
            					FTIM0_NAND_TWCHT(0x07)  | \

            
            					FTIM0_NAND_TWH(0x0a))

            
            #define CFG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \

            
            					FTIM1_NAND_TWBE(0x39)   | \

            
            					FTIM1_NAND_TRR(0x0e)    | \

            
            					FTIM1_NAND_TRP(0x18))

            
            #define CFG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f)  | \

            
            					FTIM2_NAND_TREH(0x0a)   | \

            
            					FTIM2_NAND_TWHRE(0x1e))

            
            #define CFG_SYS_NAND_FTIM3		0x0


            #define CFG_SYS_NAND_BASE_LIST	{ CFG_SYS_NAND_BASE }


            #if defined(CONFIG_MTD_RAW_NAND)

            
            #define CFG_SYS_CSPR0_EXT		CFG_SYS_NAND_CSPR_EXT

            
            #define CFG_SYS_CSPR0		CFG_SYS_NAND_CSPR

            
            #define CFG_SYS_AMASK0		CFG_SYS_NAND_AMASK

            
            #define CFG_SYS_CSOR0		CFG_SYS_NAND_CSOR

            
            #define CFG_SYS_CS0_FTIM0		CFG_SYS_NAND_FTIM0

            
            #define CFG_SYS_CS0_FTIM1		CFG_SYS_NAND_FTIM1

            
            #define CFG_SYS_CS0_FTIM2		CFG_SYS_NAND_FTIM2

            
            #define CFG_SYS_CS0_FTIM3		CFG_SYS_NAND_FTIM3

            
            #define CFG_SYS_CSPR1_EXT		CFG_SYS_NOR0_CSPR_EXT

            
            #define CFG_SYS_CSPR1		CFG_SYS_NOR0_CSPR

            
            #define CFG_SYS_AMASK1		CFG_SYS_NOR_AMASK

            
            #define CFG_SYS_CSOR1		CFG_SYS_NOR_CSOR

            
            #define CFG_SYS_CS1_FTIM0		CFG_SYS_NOR_FTIM0

            
            #define CFG_SYS_CS1_FTIM1		CFG_SYS_NOR_FTIM1

            
            #define CFG_SYS_CS1_FTIM2		CFG_SYS_NOR_FTIM2

            
            #define CFG_SYS_CS1_FTIM3		CFG_SYS_NOR_FTIM3

            
            #else

            
            #define CFG_SYS_CSPR0_EXT		CFG_SYS_NOR0_CSPR_EXT

            
            #define CFG_SYS_CSPR0		CFG_SYS_NOR0_CSPR

            
            #define CFG_SYS_AMASK0		CFG_SYS_NOR_AMASK

            
            #define CFG_SYS_CSOR0		CFG_SYS_NOR_CSOR

            
            #define CFG_SYS_CS0_FTIM0		CFG_SYS_NOR_FTIM0

            
            #define CFG_SYS_CS0_FTIM1		CFG_SYS_NOR_FTIM1

            
            #define CFG_SYS_CS0_FTIM2		CFG_SYS_NOR_FTIM2

            
            #define CFG_SYS_CS0_FTIM3		CFG_SYS_NOR_FTIM3

            
            #define CFG_SYS_CSPR1_EXT		CFG_SYS_NAND_CSPR_EXT

            
            #define CFG_SYS_CSPR1		CFG_SYS_NAND_CSPR

            
            #define CFG_SYS_AMASK1		CFG_SYS_NAND_AMASK

            
            #define CFG_SYS_CSOR1		CFG_SYS_NAND_CSOR

            
            #define CFG_SYS_CS1_FTIM0		CFG_SYS_NAND_FTIM0

            
            #define CFG_SYS_CS1_FTIM1		CFG_SYS_NAND_FTIM1

            
            #define CFG_SYS_CS1_FTIM2		CFG_SYS_NAND_FTIM2

            
            #define CFG_SYS_CS1_FTIM3		CFG_SYS_NAND_FTIM3

            
            #endif


            /* define to use L1 as initial stack */

            
            #define CFG_SYS_INIT_RAM_ADDR	0xfdd00000 /* Initial L1 address */

            
            #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf

            
            #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe03c000

            
            /* The assembler doesn't like typecast */

            
            #define CFG_SYS_INIT_RAM_ADDR_PHYS \

            
            			((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \

            
            			CFG_SYS_INIT_RAM_ADDR_PHYS_LOW)

            
            #define CFG_SYS_INIT_RAM_SIZE	0x00004000

            
            #define CFG_SYS_INIT_SP_OFFSET	(CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)


            /*

            
             * Serial Port

            
             */

            
            #if !CONFIG_IS_ENABLED(DM_SERIAL)

            
            #define CFG_SYS_NS16550_CLK		(get_bus_freq(0)/2)

            
            #endif

            
            #define CFG_SYS_BAUDRATE_TABLE	\

            
            	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

            
            #define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500)

            
            #define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600)

            
            #define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500)

            
            #define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600)


            /*

            
             * I2C

            
             */


            #define I2C_MUX_PCA_ADDR_PRI	0x77 /* I2C bus multiplexer,primary */

            
            #define I2C_MUX_PCA_ADDR_SEC1	0x75 /* I2C bus multiplexer,secondary 1 */

            
            #define I2C_MUX_PCA_ADDR_SEC2	0x76 /* I2C bus multiplexer,secondary 2 */

            
            #define I2C_MUX_CH_DEFAULT	0x8


            #define I2C_MUX_CH_VOL_MONITOR	0xa


            /* The lowest and highest voltage allowed for T208xRDB */

            
            #define VDD_MV_MIN			819

            
            #define VDD_MV_MAX			1212


            /*

            
             * RapidIO

            
             */

            
            #define CFG_SYS_SRIO1_MEM_VIRT	0xa0000000

            
            #define CFG_SYS_SRIO1_MEM_PHYS	0xc20000000ull

            
            #define CFG_SYS_SRIO1_MEM_SIZE	0x10000000 /* 256M */

            
            #define CFG_SYS_SRIO2_MEM_VIRT	0xb0000000

            
            #define CFG_SYS_SRIO2_MEM_PHYS	0xc30000000ull

            
            #define CFG_SYS_SRIO2_MEM_SIZE	0x10000000 /* 256M */

            
            /*

            
             * for slave u-boot IMAGE instored in master memory space,

            
             * PHYS must be aligned based on the SIZE

            
             */

            
            #define CFG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull

            
            #define CFG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull

            
            #define CFG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */

            
            #define CFG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull

            
            /*

            
             * for slave UCODE and ENV instored in master memory space,

            
             * PHYS must be aligned based on the SIZE

            
             */

            
            #define CFG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull

            
            #define CFG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull

            
            #define CFG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000	/* 256K */


            /* slave core release by master*/

            
            #define CFG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4

            
            #define CFG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */


            /*

            
             * SRIO_PCIE_BOOT - SLAVE

            
             */

            
            #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE

            
            #define CFG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000

            
            #define CFG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \

            
            		(0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)

            
            #endif


            /*

            
             * eSPI - Enhanced SPI

            
             */


            /*

            
             * General PCI

            
             * Memory space is mapped 1-1, but I/O space must start from 0.

            
             */

            
            /* controller 1, direct to uli, tgtid 3, Base address 20000 */

            
            #define CFG_SYS_PCIE1_MEM_VIRT	0x80000000

            
            #define CFG_SYS_PCIE1_MEM_PHYS	0xc00000000ull

            
            #define CFG_SYS_PCIE1_IO_VIRT	0xf8000000

            
            #define CFG_SYS_PCIE1_IO_PHYS	0xff8000000ull


            /* controller 2, Slot 2, tgtid 2, Base address 201000 */

            
            #define CFG_SYS_PCIE2_MEM_VIRT	0xa0000000

            
            #define CFG_SYS_PCIE2_MEM_PHYS	0xc20000000ull

            
            #define CFG_SYS_PCIE2_IO_VIRT	0xf8010000

            
            #define CFG_SYS_PCIE2_IO_PHYS	0xff8010000ull


            /* controller 3, Slot 1, tgtid 1, Base address 202000 */

            
            #define CFG_SYS_PCIE3_MEM_VIRT	0xb0000000

            
            #define CFG_SYS_PCIE3_MEM_PHYS	0xc30000000ull


            /* controller 4, Base address 203000 */

            
            #define CFG_SYS_PCIE4_MEM_VIRT       0xc0000000

            
            #define CFG_SYS_PCIE4_MEM_PHYS	0xc40000000ull


            /* Qman/Bman */

            
            #ifndef CONFIG_NOBQFMAN

            
            #define CFG_SYS_BMAN_NUM_PORTALS	18

            
            #define CFG_SYS_BMAN_MEM_BASE	0xf4000000

            
            #define CFG_SYS_BMAN_MEM_PHYS	0xff4000000ull

            
            #define CFG_SYS_BMAN_MEM_SIZE	0x02000000

            
            #define CFG_SYS_BMAN_SP_CENA_SIZE    0x4000

            
            #define CFG_SYS_BMAN_SP_CINH_SIZE    0x1000

            
            #define CFG_SYS_BMAN_CENA_BASE       CFG_SYS_BMAN_MEM_BASE

            
            #define CFG_SYS_BMAN_CENA_SIZE       (CFG_SYS_BMAN_MEM_SIZE >> 1)

            
            #define CFG_SYS_BMAN_CINH_BASE       (CFG_SYS_BMAN_MEM_BASE + \

            
            					CFG_SYS_BMAN_CENA_SIZE)

            
            #define CFG_SYS_BMAN_CINH_SIZE       (CFG_SYS_BMAN_MEM_SIZE >> 1)

            
            #define CFG_SYS_BMAN_SWP_ISDR_REG	0xE08

            
            #define CFG_SYS_QMAN_NUM_PORTALS	18

            
            #define CFG_SYS_QMAN_MEM_BASE	0xf6000000

            
            #define CFG_SYS_QMAN_MEM_PHYS	0xff6000000ull

            
            #define CFG_SYS_QMAN_MEM_SIZE	0x02000000

            
            #define CFG_SYS_QMAN_SP_CINH_SIZE    0x1000

            
            #define CFG_SYS_QMAN_CENA_SIZE       (CFG_SYS_QMAN_MEM_SIZE >> 1)

            
            #define CFG_SYS_QMAN_CINH_BASE       (CFG_SYS_QMAN_MEM_BASE + \

            
            					CFG_SYS_QMAN_CENA_SIZE)

            
            #define CFG_SYS_QMAN_CINH_SIZE       (CFG_SYS_QMAN_MEM_SIZE >> 1)

            
            #define CFG_SYS_QMAN_SWP_ISDR_REG	0xE08

            
            #endif /* CONFIG_NOBQFMAN */


            #ifdef CONFIG_SYS_DPAA_FMAN

            
            #define RGMII_PHY1_ADDR		0x01  /* RealTek RTL8211E */

            
            #define RGMII_PHY2_ADDR		0x02

            
            #define CORTINA_PHY_ADDR1	0x0c  /* Cortina CS4315 */

            
            #define CORTINA_PHY_ADDR2	0x0d

            
            /* Aquantia AQ1202 10G Base-T used by board revisions up to C */

            
            #define FM1_10GEC3_PHY_ADDR	0x00

            
            #define FM1_10GEC4_PHY_ADDR	0x01

            
            /* Aquantia AQR113C 10G Base-T used by board revisions D and up */

            
            #define AQR113C_PHY_ADDR1	0x00

            
            #define AQR113C_PHY_ADDR2	0x08

            
            #endif


            /*

            
             * USB

            
             */


            /*

            
             * SDHC

            
             */

            
            #ifdef CONFIG_MMC

            
            #define CFG_SYS_FSL_ESDHC_ADDR	CFG_SYS_MPC85xx_ESDHC_ADDR

            
            #endif


            /*

            
             * Dynamic MTD Partition support with mtdparts

            
             */


            /*

            
             * Environment

            
             */


            /*

            
             * Miscellaneous configurable options

            
             */


            /*

            
             * For booting Linux, the board info and command line data

            
             * have to be in the first 64 MB of memory, since this is

            
             * the maximum mapped by the Linux kernel during initialization.

            
             */

            
            #define CFG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/


            /*

            
             * Environment Configuration

            
             */


            #define __USB_PHY_TYPE		utmi


            #define	CFG_EXTRA_ENV_SETTINGS				\

            
            	"hwconfig=fsl_ddr:"					\

            
            	"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","	\

            
            	"bank_intlv=auto;"					\

            
            	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\

            
            	"netdev=eth0\0"						\

            
            	"uboot=" CONFIG_UBOOTPATH "\0"		\

            
            	"ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0"	\

            
            	"tftpflash=tftpboot $loadaddr $uboot && "		\

            
            	"protect off $ubootaddr +$filesize && "			\

            
            	"erase $ubootaddr +$filesize && "			\

            
            	"cp.b $loadaddr $ubootaddr $filesize && "		\

            
            	"protect on $ubootaddr +$filesize && "			\

            
            	"cmp.b $loadaddr $ubootaddr $filesize\0"		\

            
            	"consoledev=ttyS0\0"					\

            
            	"ramdiskaddr=2000000\0"					\

            
            	"ramdiskfile=t2080rdb/ramdisk.uboot\0"			\

            
            	"fdtaddr=1e00000\0"					\

            
            	"fdtfile=t2080rdb/t2080rdb.dtb\0"			\

            
            	"bdev=sda3\0"


            /*

            
             * For emulation this causes u-boot to jump to the start of the

            
             * proof point app code automatically

            
             */

            
            #define PROOF_POINTS				\

            
            	"setenv bootargs root=/dev/$bdev rw "		\

            
            	"console=$consoledev,$baudrate $othbootargs;"	\

            
            	"cpu 1 release 0x29000000 - - -;"		\

            
            	"cpu 2 release 0x29000000 - - -;"		\

            
            	"cpu 3 release 0x29000000 - - -;"		\

            
            	"cpu 4 release 0x29000000 - - -;"		\

            
            	"cpu 5 release 0x29000000 - - -;"		\

            
            	"cpu 6 release 0x29000000 - - -;"		\

            
            	"cpu 7 release 0x29000000 - - -;"		\

            
            	"go 0x29000000"


            #define HVBOOT				\

            
            	"setenv bootargs config-addr=0x60000000; "	\

            
            	"bootm 0x01000000 - 0x00f00000"


            #define ALU				\

            
            	"setenv bootargs root=/dev/$bdev rw "		\

            
            	"console=$consoledev,$baudrate $othbootargs;"	\

            
            	"cpu 1 release 0x01000000 - - -;"		\

            
            	"cpu 2 release 0x01000000 - - -;"		\

            
            	"cpu 3 release 0x01000000 - - -;"		\

            
            	"cpu 4 release 0x01000000 - - -;"		\

            
            	"cpu 5 release 0x01000000 - - -;"		\

            
            	"cpu 6 release 0x01000000 - - -;"		\

            
            	"cpu 7 release 0x01000000 - - -;"		\

            
            	"go 0x01000000"


            #include <asm/fsl_secure_boot.h>


            #endif	/* __T2080RDB_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2014 Freescale Semiconductor, Inc.
	* Copyright 2020-2023 NXP
	*/

	/*
	* T2080 RDB/PCIe board configuration file
	*/

	#ifndef __T2080RDB_H
	#define __T2080RDB_H

	#include <linux/stringify.h>

	#define CFG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */

	/* High Level Configuration Options */

	#define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS

	#ifdef CONFIG_RAMBOOT_PBL
	#define RESET_VECTOR_OFFSET 0x27FFC
	#define BOOT_PAGE_OFFSET 0x27000

	#ifdef CONFIG_MTD_RAW_NAND
	#define CFG_SYS_NAND_U_BOOT_SIZE (768 << 10)
	#define CFG_SYS_NAND_U_BOOT_DST 0x00200000
	#define CFG_SYS_NAND_U_BOOT_START 0x00200000
	#endif

	#ifdef CONFIG_SPIFLASH
	#define CFG_RESET_VECTOR_ADDRESS 0x200FFC
	#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
	#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
	#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x00200000)
	#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10)
	#endif

	#ifdef CONFIG_SDCARD
	#define CFG_RESET_VECTOR_ADDRESS 0x200FFC
	#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10)
	#define CFG_SYS_MMC_U_BOOT_DST (0x00200000)
	#define CFG_SYS_MMC_U_BOOT_START (0x00200000)
	#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10)
	#endif

	#endif /* CONFIG_RAMBOOT_PBL */

	#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
	/* Set 1M boot space */
	#define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
	#define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
	(0x300000000ull \| CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
	#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc
	#endif

	#ifndef CFG_RESET_VECTOR_ADDRESS
	#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc
	#endif

	/*
	* Config the L3 Cache as L3 SRAM
	*/
	#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000
	#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)

	#define CFG_SYS_DCSRBAR 0xf0000000
	#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull

	/*
	* DDR Setup
	*/
	#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
	#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
	#define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */
	#define SPD_EEPROM_ADDRESS1 0x51
	#define SPD_EEPROM_ADDRESS2 0x52
	#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
	#define CTRL_INTLV_PREFERED cacheline

	/*
	* IFC Definitions
	*/
	#define CFG_SYS_FLASH_BASE 0xe8000000
	#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull \| CFG_SYS_FLASH_BASE)
	#define CFG_SYS_NOR0_CSPR_EXT (0xf)
	#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) \| \
	CSPR_PORT_SIZE_16 \| \
	CSPR_MSEL_NOR \| \
	CSPR_V)
	#define CFG_SYS_NOR_AMASK IFC_AMASK(12810241024)

	/* NOR Flash Timing Params */
	#define CFG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80

	#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) \| \
	FTIM0_NOR_TEADC(0x5) \| \
	FTIM0_NOR_TEAHC(0x5))
	#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) \| \
	FTIM1_NOR_TRAD_NOR(0x1A) \|\
	FTIM1_NOR_TSEQRAD_NOR(0x13))
	#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) \| \
	FTIM2_NOR_TCH(0x4) \| \
	FTIM2_NOR_TWPH(0x0E) \| \
	FTIM2_NOR_TWP(0x1c))
	#define CFG_SYS_NOR_FTIM3 0x0

	#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS }

	/* CPLD on IFC */
	#define CFG_SYS_CPLD_BASE 0xffdf0000
	#define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull \| CFG_SYS_CPLD_BASE)
	#define CFG_SYS_CSPR2_EXT (0xf)
	#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE) \
	\| CSPR_PORT_SIZE_8 \
	\| CSPR_MSEL_GPCM \
	\| CSPR_V)
	#define CFG_SYS_AMASK2 IFC_AMASK(64*1024)
	#define CFG_SYS_CSOR2 0x0

	/* CPLD Timing parameters for IFC CS2 */
	#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) \| \
	FTIM0_GPCM_TEADC(0x0e) \| \
	FTIM0_GPCM_TEAHC(0x0e))
	#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) \| \
	FTIM1_GPCM_TRAD(0x1f))
	#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) \| \
	FTIM2_GPCM_TCH(0x8) \| \
	FTIM2_GPCM_TWP(0x1f))
	#define CFG_SYS_CS2_FTIM3 0x0

	/* NAND Flash on IFC */
	#define CFG_SYS_NAND_BASE 0xff800000
	#define CFG_SYS_NAND_BASE_PHYS (0xf00000000ull \| CFG_SYS_NAND_BASE)

	#define CFG_SYS_NAND_CSPR_EXT (0xf)
	#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
	\| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
	\| CSPR_MSEL_NAND /* MSEL = NAND */ \
	\| CSPR_V)
	#define CFG_SYS_NAND_AMASK IFC_AMASK(64*1024)

	#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
	\| CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
	\| CSOR_NAND_PGS_2K /* Page Size = 2K */\
	\| CSOR_NAND_SPRZ_64 /* Spare size = 64 */\
	\| CSOR_NAND_PB(64)) /Pages Per Block = 64/

	/* ONFI NAND Flash mode0 Timing Params */
	#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) \| \
	FTIM0_NAND_TWP(0x18) \| \
	FTIM0_NAND_TWCHT(0x07) \| \
	FTIM0_NAND_TWH(0x0a))
	#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) \| \
	FTIM1_NAND_TWBE(0x39) \| \
	FTIM1_NAND_TRR(0x0e) \| \
	FTIM1_NAND_TRP(0x18))
	#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) \| \
	FTIM2_NAND_TREH(0x0a) \| \
	FTIM2_NAND_TWHRE(0x1e))
	#define CFG_SYS_NAND_FTIM3 0x0

	#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }

	#if defined(CONFIG_MTD_RAW_NAND)
	#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT
	#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR
	#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK
	#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR
	#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0
	#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1
	#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2
	#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3
	#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT
	#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR
	#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK
	#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR
	#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0
	#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1
	#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2
	#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3
	#else
	#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT
	#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR
	#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
	#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
	#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
	#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
	#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
	#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
	#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT
	#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR
	#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK
	#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR
	#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
	#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
	#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
	#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
	#endif

	/* define to use L1 as initial stack */
	#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
	#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
	#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
	/* The assembler doesn't like typecast */
	#define CFG_SYS_INIT_RAM_ADDR_PHYS \
	((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) \| \
	CFG_SYS_INIT_RAM_ADDR_PHYS_LOW)
	#define CFG_SYS_INIT_RAM_SIZE 0x00004000
	#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

	/*
	* Serial Port
	*/
	#if !CONFIG_IS_ENABLED(DM_SERIAL)
	#define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2)
	#endif
	#define CFG_SYS_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500)
	#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600)
	#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500)
	#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600)

	/*
	* I2C
	*/

	#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
	#define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */
	#define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */
	#define I2C_MUX_CH_DEFAULT 0x8

	#define I2C_MUX_CH_VOL_MONITOR 0xa

	/* The lowest and highest voltage allowed for T208xRDB */
	#define VDD_MV_MIN 819
	#define VDD_MV_MAX 1212

	/*
	* RapidIO
	*/
	#define CFG_SYS_SRIO1_MEM_VIRT 0xa0000000
	#define CFG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
	#define CFG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
	#define CFG_SYS_SRIO2_MEM_VIRT 0xb0000000
	#define CFG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
	#define CFG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
	/*
	* for slave u-boot IMAGE instored in master memory space,
	* PHYS must be aligned based on the SIZE
	*/
	#define CFG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
	#define CFG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
	#define CFG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
	#define CFG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
	/*
	* for slave UCODE and ENV instored in master memory space,
	* PHYS must be aligned based on the SIZE
	*/
	#define CFG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
	#define CFG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
	#define CFG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */

	/* slave core release by master*/
	#define CFG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
	#define CFG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */

	/*
	* SRIO_PCIE_BOOT - SLAVE
	*/
	#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
	#define CFG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
	#define CFG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
	(0x300000000ull \| CFG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
	#endif

	/*
	* eSPI - Enhanced SPI
	*/

	/*
	* General PCI
	* Memory space is mapped 1-1, but I/O space must start from 0.
	*/
	/* controller 1, direct to uli, tgtid 3, Base address 20000 */
	#define CFG_SYS_PCIE1_MEM_VIRT 0x80000000
	#define CFG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
	#define CFG_SYS_PCIE1_IO_VIRT 0xf8000000
	#define CFG_SYS_PCIE1_IO_PHYS 0xff8000000ull

	/* controller 2, Slot 2, tgtid 2, Base address 201000 */
	#define CFG_SYS_PCIE2_MEM_VIRT 0xa0000000
	#define CFG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
	#define CFG_SYS_PCIE2_IO_VIRT 0xf8010000
	#define CFG_SYS_PCIE2_IO_PHYS 0xff8010000ull

	/* controller 3, Slot 1, tgtid 1, Base address 202000 */
	#define CFG_SYS_PCIE3_MEM_VIRT 0xb0000000
	#define CFG_SYS_PCIE3_MEM_PHYS 0xc30000000ull

	/* controller 4, Base address 203000 */
	#define CFG_SYS_PCIE4_MEM_VIRT 0xc0000000
	#define CFG_SYS_PCIE4_MEM_PHYS 0xc40000000ull

	/* Qman/Bman */
	#ifndef CONFIG_NOBQFMAN
	#define CFG_SYS_BMAN_NUM_PORTALS 18
	#define CFG_SYS_BMAN_MEM_BASE 0xf4000000
	#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull
	#define CFG_SYS_BMAN_MEM_SIZE 0x02000000
	#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000
	#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000
	#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE
	#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1)
	#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \
	CFG_SYS_BMAN_CENA_SIZE)
	#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1)
	#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08
	#define CFG_SYS_QMAN_NUM_PORTALS 18
	#define CFG_SYS_QMAN_MEM_BASE 0xf6000000
	#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull
	#define CFG_SYS_QMAN_MEM_SIZE 0x02000000
	#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000
	#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1)
	#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \
	CFG_SYS_QMAN_CENA_SIZE)
	#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1)
	#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08
	#endif /* CONFIG_NOBQFMAN */

	#ifdef CONFIG_SYS_DPAA_FMAN
	#define RGMII_PHY1_ADDR 0x01 /* RealTek RTL8211E */
	#define RGMII_PHY2_ADDR 0x02
	#define CORTINA_PHY_ADDR1 0x0c /* Cortina CS4315 */
	#define CORTINA_PHY_ADDR2 0x0d
	/* Aquantia AQ1202 10G Base-T used by board revisions up to C */
	#define FM1_10GEC3_PHY_ADDR 0x00
	#define FM1_10GEC4_PHY_ADDR 0x01
	/* Aquantia AQR113C 10G Base-T used by board revisions D and up */
	#define AQR113C_PHY_ADDR1 0x00
	#define AQR113C_PHY_ADDR2 0x08
	#endif

	/*
	* USB
	*/

	/*
	* SDHC
	*/
	#ifdef CONFIG_MMC
	#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
	#endif

	/*
	* Dynamic MTD Partition support with mtdparts
	*/

	/*
	* Environment
	*/

	/*
	* Miscellaneous configurable options
	*/

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 64 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/

	/*
	* Environment Configuration
	*/

	#define __USB_PHY_TYPE utmi

	#define CFG_EXTRA_ENV_SETTINGS \
	"hwconfig=fsl_ddr:" \
	"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
	"bank_intlv=auto;" \
	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
	"netdev=eth0\0" \
	"uboot=" CONFIG_UBOOTPATH "\0" \
	"ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
	"tftpflash=tftpboot $loadaddr $uboot && " \
	"protect off $ubootaddr +$filesize && " \
	"erase $ubootaddr +$filesize && " \
	"cp.b $loadaddr $ubootaddr $filesize && " \
	"protect on $ubootaddr +$filesize && " \
	"cmp.b $loadaddr $ubootaddr $filesize\0" \
	"consoledev=ttyS0\0" \
	"ramdiskaddr=2000000\0" \
	"ramdiskfile=t2080rdb/ramdisk.uboot\0" \
	"fdtaddr=1e00000\0" \
	"fdtfile=t2080rdb/t2080rdb.dtb\0" \
	"bdev=sda3\0"

	/*
	* For emulation this causes u-boot to jump to the start of the
	* proof point app code automatically
	*/
	#define PROOF_POINTS \
	"setenv bootargs root=/dev/$bdev rw " \
	"console=$consoledev,$baudrate $othbootargs;" \
	"cpu 1 release 0x29000000 - - -;" \
	"cpu 2 release 0x29000000 - - -;" \
	"cpu 3 release 0x29000000 - - -;" \
	"cpu 4 release 0x29000000 - - -;" \
	"cpu 5 release 0x29000000 - - -;" \
	"cpu 6 release 0x29000000 - - -;" \
	"cpu 7 release 0x29000000 - - -;" \
	"go 0x29000000"

	#define HVBOOT \
	"setenv bootargs config-addr=0x60000000; " \
	"bootm 0x01000000 - 0x00f00000"

	#define ALU \
	"setenv bootargs root=/dev/$bdev rw " \
	"console=$consoledev,$baudrate $othbootargs;" \
	"cpu 1 release 0x01000000 - - -;" \
	"cpu 2 release 0x01000000 - - -;" \
	"cpu 3 release 0x01000000 - - -;" \
	"cpu 4 release 0x01000000 - - -;" \
	"cpu 5 release 0x01000000 - - -;" \
	"cpu 6 release 0x01000000 - - -;" \
	"cpu 7 release 0x01000000 - - -;" \
	"go 0x01000000"

	#include <asm/fsl_secure_boot.h>

	#endif /* __T2080RDB_H */