| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> | |
| */ | |
| #ifndef _CONFIG_THEADORABLE_H | |
| #define _CONFIG_THEADORABLE_H | |
| #include <linux/sizes.h> | |
| /* | |
| * High Level Configuration Options (easy to change) | |
| */ | |
| /* | |
| * TEXT_BASE needs to be below 16MiB, since this area is scrubbed | |
| * for DDR ECC byte filling in the SPL before loading the main | |
| * U-Boot into it. | |
| */ | |
| /* | |
| * The debugging version enables USB support via defconfig. | |
| * This version should also enable all other non-production | |
| * interfaces / features. | |
| */ | |
| /* I2C */ | |
| #define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE | |
| #define CFG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE | |
| /* USB/EHCI configuration */ | |
| /* Environment in SPI NOR flash */ | |
| /* Keep device tree and initrd in lower memory so the kernel can access them */ | |
| #define CFG_EXTRA_ENV_SETTINGS \ | |
| "fdt_high=0x10000000\0" \ | |
| "initrd_high=0x10000000\0" | |
| /* | |
| * Bootcounter | |
| */ | |
| /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */ | |
| #define BOOTCOUNT_ADDR 0x1000 | |
| /* | |
| * mv-common.h should be defined after CMD configs since it used them | |
| * to enable certain macros | |
| */ | |
| #include "mv-common.h" | |
| /* | |
| * Memory layout while starting into the bin_hdr via the | |
| * BootROM: | |
| * | |
| * 0x4000.4000 - 0x4003.4000 headers space (192KiB) | |
| * 0x4000.4030 bin_hdr start address | |
| * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) | |
| * 0x4007.fffc BootROM stack top | |
| * | |
| * The address space between 0x4007.fffc and 0x400f.fff is not locked in | |
| * L2 cache thus cannot be used. | |
| */ | |
| /* SPL */ | |
| /* Defines for SPL */ | |
| /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ | |
| #define CFG_SYS_SDRAM_SIZE SZ_2G | |
| #endif /* _CONFIG_THEADORABLE_H */ |