| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * efi_selftest_devicepath | |
| * | |
| * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de> | |
| * | |
| * This unit test checks the following protocol services: | |
| * DevicePathToText | |
| */ | |
| #include <efi_selftest.h> | |
| static struct efi_boot_services *boottime; | |
| static efi_handle_t handle1; | |
| static efi_handle_t handle2; | |
| static efi_handle_t handle3; | |
| struct interface { | |
| void (EFIAPI * inc)(void); | |
| } interface; | |
| static efi_guid_t guid_device_path = EFI_DEVICE_PATH_PROTOCOL_GUID; | |
| static efi_guid_t guid_device_path_to_text_protocol = | |
| EFI_DEVICE_PATH_TO_TEXT_PROTOCOL_GUID; | |
| static efi_guid_t guid_protocol = | |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, | |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0x7d); | |
| static efi_guid_t guid_vendor1 = | |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, | |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0xb1); | |
| static efi_guid_t guid_vendor2 = | |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, | |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0xa2); | |
| static efi_guid_t guid_vendor3 = | |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, | |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0xc3); | |
| static u8 *dp1; | |
| static u8 *dp2; | |
| static u8 *dp3; | |
| static struct { | |
| struct efi_device_path_sd_mmc_path sd1; | |
| struct efi_device_path sep1; | |
| struct efi_device_path_sd_mmc_path sd2; | |
| struct efi_device_path sep2; | |
| struct efi_device_path_sd_mmc_path sd3; | |
| struct efi_device_path end; | |
| } multi_part_dp = { | |
| { | |
| { | |
| DEVICE_PATH_TYPE_MESSAGING_DEVICE, | |
| DEVICE_PATH_SUB_TYPE_MSG_SD, | |
| sizeof(struct efi_device_path_sd_mmc_path), | |
| }, | |
| 0, | |
| }, | |
| { | |
| DEVICE_PATH_TYPE_END, | |
| DEVICE_PATH_SUB_TYPE_INSTANCE_END, | |
| sizeof(struct efi_device_path), | |
| }, | |
| { | |
| { | |
| DEVICE_PATH_TYPE_MESSAGING_DEVICE, | |
| DEVICE_PATH_SUB_TYPE_MSG_SD, | |
| sizeof(struct efi_device_path_sd_mmc_path), | |
| }, | |
| 1, | |
| }, | |
| { | |
| DEVICE_PATH_TYPE_END, | |
| DEVICE_PATH_SUB_TYPE_INSTANCE_END, | |
| sizeof(struct efi_device_path), | |
| }, | |
| { | |
| { | |
| DEVICE_PATH_TYPE_MESSAGING_DEVICE, | |
| DEVICE_PATH_SUB_TYPE_MSG_SD, | |
| sizeof(struct efi_device_path_sd_mmc_path), | |
| }, | |
| 2, | |
| }, | |
| { | |
| DEVICE_PATH_TYPE_END, | |
| DEVICE_PATH_SUB_TYPE_END, | |
| sizeof(struct efi_device_path), | |
| }, | |
| }; | |
| struct efi_device_path_to_text_protocol *device_path_to_text; | |
| /* | |
| * Setup unit test. | |
| * | |
| * Create three handles. Install a new protocol on two of them and | |
| * provide device paths. | |
| * | |
| * handle1 | |
| * guid interface | |
| * handle2 | |
| * guid interface | |
| * handle3 | |
| * | |
| * @handle: handle of the loaded image | |
| * @systable: system table | |
| */ | |
| static int setup(const efi_handle_t img_handle, | |
| const struct efi_system_table *systable) | |
| { | |
| struct efi_device_path_vendor vendor_node; | |
| struct efi_device_path end_node; | |
| efi_status_t ret; | |
| boottime = systable->boottime; | |
| ret = boottime->locate_protocol(&guid_device_path_to_text_protocol, | |
| NULL, (void **)&device_path_to_text); | |
| if (ret != EFI_SUCCESS) { | |
| device_path_to_text = NULL; | |
| efi_st_error( | |
| "Device path to text protocol is not available.\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, | |
| sizeof(struct efi_device_path_vendor) + | |
| sizeof(struct efi_device_path), | |
| (void **)&dp1); | |
| if (ret != EFI_SUCCESS) | |
| goto out_of_memory; | |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, 2 * | |
| sizeof(struct efi_device_path_vendor) + | |
| sizeof(struct efi_device_path), | |
| (void **)&dp2); | |
| if (ret != EFI_SUCCESS) | |
| goto out_of_memory; | |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, 3 * | |
| sizeof(struct efi_device_path_vendor) + | |
| sizeof(struct efi_device_path), | |
| (void **)&dp3); | |
| if (ret != EFI_SUCCESS) | |
| goto out_of_memory; | |
| vendor_node.dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE; | |
| vendor_node.dp.sub_type = DEVICE_PATH_SUB_TYPE_VENDOR; | |
| vendor_node.dp.length = sizeof(struct efi_device_path_vendor); | |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor1, | |
| sizeof(efi_guid_t)); | |
| boottime->copy_mem(dp1, &vendor_node, | |
| sizeof(struct efi_device_path_vendor)); | |
| boottime->copy_mem(dp2, &vendor_node, | |
| sizeof(struct efi_device_path_vendor)); | |
| boottime->copy_mem(dp3, &vendor_node, | |
| sizeof(struct efi_device_path_vendor)); | |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor2, | |
| sizeof(efi_guid_t)); | |
| boottime->copy_mem(dp2 + sizeof(struct efi_device_path_vendor), | |
| &vendor_node, sizeof(struct efi_device_path_vendor)); | |
| boottime->copy_mem(dp3 + sizeof(struct efi_device_path_vendor), | |
| &vendor_node, sizeof(struct efi_device_path_vendor)); | |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor3, | |
| sizeof(efi_guid_t)); | |
| boottime->copy_mem(dp3 + 2 * sizeof(struct efi_device_path_vendor), | |
| &vendor_node, sizeof(struct efi_device_path_vendor)); | |
| end_node.type = DEVICE_PATH_TYPE_END; | |
| end_node.sub_type = DEVICE_PATH_SUB_TYPE_END; | |
| end_node.length = sizeof(struct efi_device_path); | |
| boottime->copy_mem(dp1 + sizeof(struct efi_device_path_vendor), | |
| &end_node, sizeof(struct efi_device_path)); | |
| boottime->copy_mem(dp2 + 2 * sizeof(struct efi_device_path_vendor), | |
| &end_node, sizeof(struct efi_device_path)); | |
| boottime->copy_mem(dp3 + 3 * sizeof(struct efi_device_path_vendor), | |
| &end_node, sizeof(struct efi_device_path)); | |
| ret = boottime->install_protocol_interface(&handle1, | |
| &guid_device_path, | |
| EFI_NATIVE_INTERFACE, | |
| dp1); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("InstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->install_protocol_interface(&handle1, | |
| &guid_protocol, | |
| EFI_NATIVE_INTERFACE, | |
| &interface); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("InstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->install_protocol_interface(&handle2, | |
| &guid_device_path, | |
| EFI_NATIVE_INTERFACE, | |
| dp2); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("InstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->install_protocol_interface(&handle2, | |
| &guid_protocol, | |
| EFI_NATIVE_INTERFACE, | |
| &interface); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("InstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->install_protocol_interface(&handle3, | |
| &guid_device_path, | |
| EFI_NATIVE_INTERFACE, | |
| dp3); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("InstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| return EFI_ST_SUCCESS; | |
| out_of_memory: | |
| efi_st_error("Out of memory\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| /* | |
| * Tear down unit test. | |
| * | |
| */ | |
| static int teardown(void) | |
| { | |
| efi_status_t ret; | |
| ret = boottime->uninstall_protocol_interface(handle1, | |
| &guid_device_path, | |
| dp1); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("UninstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->uninstall_protocol_interface(handle1, | |
| &guid_protocol, | |
| &interface); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("UninstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->uninstall_protocol_interface(handle2, | |
| &guid_device_path, | |
| dp2); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("UninstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->uninstall_protocol_interface(handle2, | |
| &guid_protocol, | |
| &interface); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("UninstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->uninstall_protocol_interface(handle3, | |
| &guid_device_path, | |
| dp3); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("UninstallProtocolInterface failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| if (dp1) { | |
| ret = boottime->free_pool(dp1); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| } | |
| if (dp2) { | |
| ret = boottime->free_pool(dp2); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| } | |
| if (dp3) { | |
| ret = boottime->free_pool(dp3); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| } | |
| return EFI_ST_SUCCESS; | |
| } | |
| /* | |
| * Execute unit test. | |
| * | |
| */ | |
| static int execute(void) | |
| { | |
| struct efi_device_path *remaining_dp; | |
| efi_handle_t handle; | |
| /* | |
| * This device path node ends with the letter 't' of 'u-boot'. | |
| * The following '.bin' does not belong to the node but is | |
| * helps to test the correct truncation. | |
| */ | |
| struct { | |
| struct efi_device_path dp; | |
| u16 text[12]; | |
| } __packed dp_node = { | |
| { DEVICE_PATH_TYPE_MEDIA_DEVICE, | |
| DEVICE_PATH_SUB_TYPE_FILE_PATH, | |
| sizeof(struct efi_device_path) + 12}, | |
| u"u-boot.bin", | |
| }; | |
| u16 *string; | |
| efi_status_t ret; | |
| efi_uintn_t i, no_handles; | |
| efi_handle_t *handles; | |
| struct efi_device_path *dp; | |
| /* Display all available device paths */ | |
| ret = boottime->locate_handle_buffer(BY_PROTOCOL, | |
| &guid_device_path, | |
| NULL, &no_handles, &handles); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("Cannot retrieve device path protocols.\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| efi_st_printf("Installed device path protocols:\n"); | |
| for (i = 0; i < no_handles; ++i) { | |
| ret = boottime->open_protocol(handles[i], &guid_device_path, | |
| (void **)&dp, NULL, NULL, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("Cannot open device path protocol.\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| string = device_path_to_text->convert_device_path_to_text( | |
| dp, true, false); | |
| if (!string) { | |
| efi_st_error("ConvertDevicePathToText failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| efi_st_printf("%ps\n", string); | |
| ret = boottime->free_pool(string); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| /* | |
| * CloseProtocol cannot be called without agent handle. | |
| * There is no need to close the device path protocol. | |
| */ | |
| } | |
| ret = boottime->free_pool(handles); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| /* Test ConvertDevicePathToText */ | |
| string = device_path_to_text->convert_device_path_to_text( | |
| (struct efi_device_path *)dp2, true, false); | |
| if (!string) { | |
| efi_st_error("ConvertDevicePathToText failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| if (efi_st_strcmp_16_8( | |
| string, | |
| "/VenHw(dbca4c98-6cb0-694d-0872-819c650cbbb1)/VenHw(dbca4c98-6cb0-694d-0872-819c650cbba2)") | |
| ) { | |
| efi_st_printf("dp2: %ps\n", string); | |
| efi_st_error("Incorrect text from ConvertDevicePathToText\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->free_pool(string); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| string = device_path_to_text->convert_device_path_to_text( | |
| (struct efi_device_path *)&multi_part_dp, true, false); | |
| if (efi_st_strcmp_16_8( | |
| string, | |
| "/SD(0),/SD(1),/SD(2)") | |
| ) { | |
| efi_st_printf("multi_part_dp: %ps\n", string); | |
| efi_st_error("Incorrect text from ConvertDevicePathToText\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->free_pool(string); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| /* Test ConvertDeviceNodeToText */ | |
| string = device_path_to_text->convert_device_node_to_text( | |
| (struct efi_device_path *)&dp_node, true, false); | |
| if (!string) { | |
| efi_st_error("ConvertDeviceNodeToText failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| if (efi_st_strcmp_16_8(string, "u-boot")) { | |
| efi_st_printf("dp_node: %ps\n", string); | |
| efi_st_error( | |
| "Incorrect conversion by ConvertDeviceNodeToText\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->free_pool(string); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| /* Test LocateDevicePath */ | |
| remaining_dp = (struct efi_device_path *)dp3; | |
| ret = boottime->locate_device_path(&guid_protocol, &remaining_dp, | |
| &handle); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("LocateDevicePath failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| if (handle != handle2) { | |
| efi_st_error("LocateDevicePath returned wrong handle\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| string = device_path_to_text->convert_device_path_to_text(remaining_dp, | |
| true, false); | |
| if (!string) { | |
| efi_st_error("ConvertDevicePathToText failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| if (efi_st_strcmp_16_8(string, | |
| "/VenHw(dbca4c98-6cb0-694d-0872-819c650cbbc3)") | |
| ) { | |
| efi_st_printf("remaining device path: %ps\n", string); | |
| efi_st_error("LocateDevicePath: wrong remaining device path\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| ret = boottime->free_pool(string); | |
| if (ret != EFI_SUCCESS) { | |
| efi_st_error("FreePool failed\n"); | |
| return EFI_ST_FAILURE; | |
| } | |
| return EFI_ST_SUCCESS; | |
| } | |
| EFI_UNIT_TEST(devicepath) = { | |
| .name = "device path", | |
| .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, | |
| .setup = setup, | |
| .execute = execute, | |
| .teardown = teardown, | |
| }; |