| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2019 | |
| * Alex Marginean, NXP | |
| */ | |
| #include <dm.h> | |
| #include <log.h> | |
| #include <miiphy.h> | |
| #include <dm/device-internal.h> | |
| #include <dm/uclass-internal.h> | |
| #include <dm/lists.h> | |
| #define MDIO_MUX_CHILD_DRV_NAME "mdio-mux-bus-drv" | |
| /** | |
| * struct mdio_mux_perdev_priv - Per-device class data for MDIO MUX DM | |
| * | |
| * @parent_mdio: Parent DM MDIO device, this is called for actual MDIO I/O after | |
| * setting up the mux. Typically this is a real MDIO device, | |
| * unless there are cascaded muxes. | |
| * @selected: Current child bus selection. Defaults to -1 | |
| */ | |
| struct mdio_mux_perdev_priv { | |
| struct udevice *mdio_parent; | |
| int selected; | |
| }; | |
| /* | |
| * This source file uses three types of devices, as follows: | |
| * - mux is the hardware MDIO MUX which selects between the existing child MDIO | |
| * buses, this is the device relevant for MDIO MUX class of drivers. | |
| * - ch is a child MDIO bus, this is just a representation of a mux selection, | |
| * not a real piece of hardware. | |
| * - mdio_parent is the actual MDIO bus called to perform reads/writes after | |
| * the MUX is configured. Typically this is a real MDIO device, unless there | |
| * are cascaded muxes. | |
| */ | |
| /** | |
| * struct mdio_mux_ch_data - Per-device data for child MDIOs | |
| * | |
| * @sel: Selection value used by the MDIO MUX to access this child MDIO bus | |
| */ | |
| struct mdio_mux_ch_data { | |
| int sel; | |
| }; | |
| static struct udevice *mmux_get_parent_mdio(struct udevice *mux) | |
| { | |
| struct mdio_mux_perdev_priv *pdata = dev_get_uclass_priv(mux); | |
| return pdata->mdio_parent; | |
| } | |
| /* call driver select function before performing MDIO r/w */ | |
| static int mmux_change_sel(struct udevice *ch, bool sel) | |
| { | |
| struct udevice *mux = ch->parent; | |
| struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux); | |
| struct mdio_mux_ops *ops = mdio_mux_get_ops(mux); | |
| struct mdio_mux_ch_data *ch_data = dev_get_parent_plat(ch); | |
| int err = 0; | |
| if (sel) { | |
| err = ops->select(mux, priv->selected, ch_data->sel); | |
| if (err) | |
| return err; | |
| priv->selected = ch_data->sel; | |
| } else { | |
| if (ops->deselect) { | |
| ops->deselect(mux, ch_data->sel); | |
| priv->selected = MDIO_MUX_SELECT_NONE; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Read wrapper, sets up the mux before issuing a read on parent MDIO bus */ | |
| static int mmux_read(struct udevice *ch, int addr, int devad, | |
| int reg) | |
| { | |
| struct udevice *mux = ch->parent; | |
| struct udevice *parent_mdio = mmux_get_parent_mdio(mux); | |
| int err; | |
| err = mmux_change_sel(ch, true); | |
| if (err) | |
| return err; | |
| err = dm_mdio_read(parent_mdio, addr, devad, reg); | |
| mmux_change_sel(ch, false); | |
| return err; | |
| } | |
| /* Write wrapper, sets up the mux before issuing a write on parent MDIO bus */ | |
| static int mmux_write(struct udevice *ch, int addr, int devad, | |
| int reg, u16 val) | |
| { | |
| struct udevice *mux = ch->parent; | |
| struct udevice *parent_mdio = mmux_get_parent_mdio(mux); | |
| int err; | |
| err = mmux_change_sel(ch, true); | |
| if (err) | |
| return err; | |
| err = dm_mdio_write(parent_mdio, addr, devad, reg, val); | |
| mmux_change_sel(ch, false); | |
| return err; | |
| } | |
| /* Reset wrapper, sets up the mux before issuing a reset on parent MDIO bus */ | |
| static int mmux_reset(struct udevice *ch) | |
| { | |
| struct udevice *mux = ch->parent; | |
| struct udevice *parent_mdio = mmux_get_parent_mdio(mux); | |
| int err; | |
| /* reset is optional, if it's not implemented just exit */ | |
| if (!mdio_get_ops(parent_mdio)->reset) | |
| return 0; | |
| err = mmux_change_sel(ch, true); | |
| if (err) | |
| return err; | |
| err = dm_mdio_reset(parent_mdio); | |
| mmux_change_sel(ch, false); | |
| return err; | |
| } | |
| /* Picks up the mux selection value for each child */ | |
| static int dm_mdio_mux_child_post_bind(struct udevice *ch) | |
| { | |
| struct mdio_mux_ch_data *ch_data = dev_get_parent_plat(ch); | |
| ch_data->sel = dev_read_u32_default(ch, "reg", MDIO_MUX_SELECT_NONE); | |
| if (ch_data->sel == MDIO_MUX_SELECT_NONE) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* Explicitly bind child MDIOs after binding the mux */ | |
| static int dm_mdio_mux_post_bind(struct udevice *mux) | |
| { | |
| ofnode ch_node; | |
| int err, first_err = 0; | |
| if (!dev_has_ofnode(mux)) { | |
| debug("%s: no mux node found, no child MDIO busses set up\n", | |
| __func__); | |
| return 0; | |
| } | |
| /* | |
| * we're going by Linux bindings so the child nodes do not have | |
| * compatible strings. We're going through them here and binding to | |
| * them. | |
| */ | |
| dev_for_each_subnode(ch_node, mux) { | |
| struct udevice *ch_dev; | |
| const char *ch_name; | |
| ch_name = ofnode_get_name(ch_node); | |
| err = device_bind_driver_to_node(mux, MDIO_MUX_CHILD_DRV_NAME, | |
| ch_name, ch_node, &ch_dev); | |
| /* try to bind all, but keep 1st error */ | |
| if (err && !first_err) | |
| first_err = err; | |
| } | |
| return first_err; | |
| } | |
| /* Get a reference to the parent MDIO bus, it should be bound by now */ | |
| static int dm_mdio_mux_post_probe(struct udevice *mux) | |
| { | |
| struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux); | |
| int err; | |
| priv->selected = MDIO_MUX_SELECT_NONE; | |
| /* pick up mdio parent from device tree */ | |
| err = uclass_get_device_by_phandle(UCLASS_MDIO, mux, "mdio-parent-bus", | |
| &priv->mdio_parent); | |
| if (err) { | |
| debug("%s: didn't find mdio-parent-bus\n", __func__); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| const struct mdio_ops mmux_child_mdio_ops = { | |
| .read = mmux_read, | |
| .write = mmux_write, | |
| .reset = mmux_reset, | |
| }; | |
| /* MDIO class driver used for MUX child MDIO buses */ | |
| U_BOOT_DRIVER(mdio_mux_child) = { | |
| .name = MDIO_MUX_CHILD_DRV_NAME, | |
| .id = UCLASS_MDIO, | |
| .ops = &mmux_child_mdio_ops, | |
| }; | |
| UCLASS_DRIVER(mdio_mux) = { | |
| .id = UCLASS_MDIO_MUX, | |
| .name = "mdio-mux", | |
| .child_post_bind = dm_mdio_mux_child_post_bind, | |
| .post_bind = dm_mdio_mux_post_bind, | |
| .post_probe = dm_mdio_mux_post_probe, | |
| .per_device_auto = sizeof(struct mdio_mux_perdev_priv), | |
| .per_child_plat_auto = sizeof(struct mdio_mux_ch_data), | |
| }; |