| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2018 Arm Ltd. | |
| */ | |
| #include "imagetool.h" | |
| #include <image.h> | |
| #include <sunxi_image.h> | |
| /* | |
| * NAND requires 8K padding. SD/eMMC gets away with 512 bytes, | |
| * but let's use the larger padding by default to cover both. | |
| */ | |
| #define PAD_SIZE 8192 | |
| #define PAD_SIZE_MIN 512 | |
| static int egon_get_arch(struct image_tool_params *params) | |
| { | |
| if (params->Aflag) | |
| return params->arch; | |
| /* For compatibility, assume ARM when no architecture specified */ | |
| return IH_ARCH_ARM; | |
| } | |
| static int egon_check_params(struct image_tool_params *params) | |
| { | |
| /* | |
| * Check whether the architecture is supported. | |
| */ | |
| switch (egon_get_arch(params)) { | |
| case IH_ARCH_ARM: | |
| case IH_ARCH_RISCV: | |
| break; | |
| default: | |
| return EXIT_FAILURE; | |
| } | |
| /* We need a binary image file. */ | |
| return !params->dflag; | |
| } | |
| static int egon_verify_header(unsigned char *ptr, int image_size, | |
| struct image_tool_params *params) | |
| { | |
| const struct boot_file_head *header = (void *)ptr; | |
| uint32_t length; | |
| /* | |
| * First 4 bytes must be a branch instruction of the corresponding | |
| * architecture. | |
| */ | |
| switch (egon_get_arch(params)) { | |
| case IH_ARCH_ARM: | |
| if ((le32_to_cpu(header->b_instruction) & 0xff000000) != 0xea000000) | |
| return EXIT_FAILURE; | |
| break; | |
| case IH_ARCH_RISCV: | |
| if ((le32_to_cpu(header->b_instruction) & 0x00000fff) != 0x0000006f) | |
| return EXIT_FAILURE; | |
| break; | |
| default: | |
| return EXIT_FAILURE; /* Unknown architecture */ | |
| } | |
| if (memcmp(header->magic, BOOT0_MAGIC, sizeof(header->magic))) | |
| return EXIT_FAILURE; | |
| length = le32_to_cpu(header->length); | |
| /* Must be at least 512 byte aligned. */ | |
| if (length & 511) | |
| return EXIT_FAILURE; | |
| /* | |
| * Image could also contain U-Boot proper, so could be bigger. | |
| * But it must not be shorter. | |
| */ | |
| if (image_size < length) | |
| return EXIT_FAILURE; | |
| return EXIT_SUCCESS; | |
| } | |
| static void egon_print_header(const void *buf, struct image_tool_params *params) | |
| { | |
| const struct boot_file_head *header = buf; | |
| printf("Allwinner eGON image, size: %d bytes\n", | |
| le32_to_cpu(header->length)); | |
| if (memcmp(header->spl_signature, SPL_SIGNATURE, 3)) | |
| return; | |
| printf("\tSPL header version %d.%d\n", | |
| header->spl_signature[3] >> SPL_MINOR_BITS, | |
| header->spl_signature[3] & ((1U << SPL_MINOR_BITS) - 1)); | |
| if (header->spl_signature[3] >= SPL_DT_HEADER_VERSION) { | |
| uint32_t dt_name_offs = le32_to_cpu(header->dt_name_offset); | |
| if (dt_name_offs > 0) | |
| printf("\tDT name: %s\n", (char *)buf + dt_name_offs); | |
| } | |
| } | |
| static void egon_set_header(void *buf, struct stat *sbuf, int infd, | |
| struct image_tool_params *params) | |
| { | |
| struct boot_file_head *header = buf; | |
| uint32_t *buf32 = buf; | |
| uint32_t checksum = 0, value; | |
| int i; | |
| /* | |
| * Different architectures need different first instruction to | |
| * branch to the body. | |
| */ | |
| switch (egon_get_arch(params)) { | |
| case IH_ARCH_ARM: | |
| /* Generate an ARM branch instruction to jump over the header. */ | |
| value = 0xea000000 | (sizeof(struct boot_file_head) / 4 - 2); | |
| header->b_instruction = cpu_to_le32(value); | |
| break; | |
| case IH_ARCH_RISCV: | |
| /* | |
| * Generate a RISC-V JAL instruction with rd=x0 | |
| * (pseudo instruction J, jump without side effects). | |
| * | |
| * The following weird bit operation maps imm[20] | |
| * to inst[31], imm[10:1] to inst[30:21], | |
| * imm[11] to inst[20], imm[19:12] to inst[19:12], | |
| * and imm[0] is dropped (because 1-byte RISC-V instruction | |
| * is not allowed). | |
| */ | |
| value = 0x0000006f | | |
| ((sizeof(struct boot_file_head) & 0x00100000) << 11) | | |
| ((sizeof(struct boot_file_head) & 0x000007fe) << 20) | | |
| ((sizeof(struct boot_file_head) & 0x00000800) << 9) | | |
| ((sizeof(struct boot_file_head) & 0x000ff000) << 0); | |
| header->b_instruction = cpu_to_le32(value); | |
| break; | |
| } | |
| memcpy(header->magic, BOOT0_MAGIC, sizeof(header->magic)); | |
| header->check_sum = cpu_to_le32(BROM_STAMP_VALUE); | |
| header->length = cpu_to_le32(params->file_size); | |
| memcpy(header->spl_signature, SPL_SIGNATURE, 3); | |
| header->spl_signature[3] = SPL_ENV_HEADER_VERSION; | |
| /* If an image name has been provided, use it as the DT name. */ | |
| if (params->imagename && params->imagename[0]) { | |
| if (strlen(params->imagename) > sizeof(header->string_pool) - 1) | |
| printf("WARNING: DT name too long for SPL header!\n"); | |
| else { | |
| strcpy((char *)header->string_pool, params->imagename); | |
| value = offsetof(struct boot_file_head, string_pool); | |
| header->dt_name_offset = cpu_to_le32(value); | |
| header->spl_signature[3] = SPL_DT_HEADER_VERSION; | |
| } | |
| } | |
| /* Calculate the checksum. Yes, it's that simple. */ | |
| for (i = 0; i < sbuf->st_size / 4; i++) | |
| checksum += le32_to_cpu(buf32[i]); | |
| header->check_sum = cpu_to_le32(checksum); | |
| } | |
| static int egon_check_image_type(uint8_t type) | |
| { | |
| return type == IH_TYPE_SUNXI_EGON ? 0 : 1; | |
| } | |
| static int egon_vrec_header(struct image_tool_params *params, | |
| struct image_type_params *tparams) | |
| { | |
| int pad_size = ALIGN(params->bl_len ?: PAD_SIZE, PAD_SIZE_MIN); | |
| tparams->hdr = calloc(sizeof(struct boot_file_head), 1); | |
| /* Return padding to complete blocks. */ | |
| return ALIGN(params->file_size, pad_size) - params->file_size; | |
| } | |
| U_BOOT_IMAGE_TYPE( | |
| sunxi_egon, | |
| "Allwinner eGON Boot Image support", | |
| sizeof(struct boot_file_head), | |
| NULL, | |
| egon_check_params, | |
| egon_verify_header, | |
| egon_print_header, | |
| egon_set_header, | |
| NULL, | |
| egon_check_image_type, | |
| NULL, | |
| egon_vrec_header | |
| ); |