| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * EFI application loader | |
| * | |
| * Copyright (c) 2016 Alexander Graf | |
| */ | |
| #include <charset.h> | |
| #include <common.h> | |
| #include <command.h> | |
| #include <dm.h> | |
| #include <efi_loader.h> | |
| #include <efi_selftest.h> | |
| #include <errno.h> | |
| #include <linux/libfdt.h> | |
| #include <linux/libfdt_env.h> | |
| #include <mapmem.h> | |
| #include <memalign.h> | |
| #include <asm/global_data.h> | |
| #include <asm-generic/sections.h> | |
| #include <asm-generic/unaligned.h> | |
| #include <linux/linkage.h> | |
| #ifdef CONFIG_ARMV7_NONSEC | |
| #include <asm/armv7.h> | |
| #include <asm/secure.h> | |
| #endif | |
| DECLARE_GLOBAL_DATA_PTR; | |
| #define OBJ_LIST_NOT_INITIALIZED 1 | |
| static efi_status_t efi_obj_list_initialized = OBJ_LIST_NOT_INITIALIZED; | |
| static struct efi_device_path *bootefi_image_path; | |
| static struct efi_device_path *bootefi_device_path; | |
| /* Initialize and populate EFI object list */ | |
| efi_status_t efi_init_obj_list(void) | |
| { | |
| efi_status_t ret = EFI_SUCCESS; | |
| /* Initialize once only */ | |
| if (efi_obj_list_initialized != OBJ_LIST_NOT_INITIALIZED) | |
| return efi_obj_list_initialized; | |
| /* Initialize system table */ | |
| ret = efi_initialize_system_table(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| /* Initialize EFI driver uclass */ | |
| ret = efi_driver_init(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| ret = efi_console_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| #ifdef CONFIG_PARTITIONS | |
| ret = efi_disk_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| #endif | |
| #if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO) | |
| ret = efi_gop_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| #endif | |
| #ifdef CONFIG_NET | |
| ret = efi_net_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| #endif | |
| #ifdef CONFIG_GENERATE_ACPI_TABLE | |
| ret = efi_acpi_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| #endif | |
| #ifdef CONFIG_GENERATE_SMBIOS_TABLE | |
| ret = efi_smbios_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| #endif | |
| ret = efi_watchdog_register(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| /* Initialize EFI runtime services */ | |
| ret = efi_reset_system_init(); | |
| if (ret != EFI_SUCCESS) | |
| goto out; | |
| out: | |
| efi_obj_list_initialized = ret; | |
| return ret; | |
| } | |
| /* | |
| * Allow unaligned memory access. | |
| * | |
| * This routine is overridden by architectures providing this feature. | |
| */ | |
| void __weak allow_unaligned(void) | |
| { | |
| } | |
| /* | |
| * Set the load options of an image from an environment variable. | |
| * | |
| * @loaded_image_info: the image | |
| * @env_var: name of the environment variable | |
| */ | |
| static void set_load_options(struct efi_loaded_image *loaded_image_info, | |
| const char *env_var) | |
| { | |
| size_t size; | |
| const char *env = env_get(env_var); | |
| loaded_image_info->load_options = NULL; | |
| loaded_image_info->load_options_size = 0; | |
| if (!env) | |
| return; | |
| size = strlen(env) + 1; | |
| loaded_image_info->load_options = calloc(size, sizeof(u16)); | |
| if (!loaded_image_info->load_options) { | |
| printf("ERROR: Out of memory\n"); | |
| return; | |
| } | |
| utf8_to_utf16(loaded_image_info->load_options, (u8 *)env, size); | |
| loaded_image_info->load_options_size = size * 2; | |
| } | |
| static void *copy_fdt(void *fdt) | |
| { | |
| u64 fdt_size = fdt_totalsize(fdt); | |
| unsigned long fdt_ram_start = -1L, fdt_pages; | |
| u64 new_fdt_addr; | |
| void *new_fdt; | |
| int i; | |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { | |
| u64 ram_start = gd->bd->bi_dram[i].start; | |
| u64 ram_size = gd->bd->bi_dram[i].size; | |
| if (!ram_size) | |
| continue; | |
| if (ram_start < fdt_ram_start) | |
| fdt_ram_start = ram_start; | |
| } | |
| /* | |
| * Give us at least 4KB of breathing room in case the device tree needs | |
| * to be expanded later. Round up to the nearest EFI page boundary. | |
| */ | |
| fdt_size += 4096; | |
| fdt_size = ALIGN(fdt_size + EFI_PAGE_SIZE - 1, EFI_PAGE_SIZE); | |
| fdt_pages = fdt_size >> EFI_PAGE_SHIFT; | |
| /* Safe fdt location is at 128MB */ | |
| new_fdt_addr = fdt_ram_start + (128 * 1024 * 1024) + fdt_size; | |
| if (efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, | |
| EFI_RUNTIME_SERVICES_DATA, fdt_pages, | |
| &new_fdt_addr) != EFI_SUCCESS) { | |
| /* If we can't put it there, put it somewhere */ | |
| new_fdt_addr = (ulong)memalign(EFI_PAGE_SIZE, fdt_size); | |
| if (efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS, | |
| EFI_RUNTIME_SERVICES_DATA, fdt_pages, | |
| &new_fdt_addr) != EFI_SUCCESS) { | |
| printf("ERROR: Failed to reserve space for FDT\n"); | |
| return NULL; | |
| } | |
| } | |
| new_fdt = (void*)(ulong)new_fdt_addr; | |
| memcpy(new_fdt, fdt, fdt_totalsize(fdt)); | |
| fdt_set_totalsize(new_fdt, fdt_size); | |
| return new_fdt; | |
| } | |
| static efi_status_t efi_do_enter( | |
| efi_handle_t image_handle, struct efi_system_table *st, | |
| EFIAPI efi_status_t (*entry)( | |
| efi_handle_t image_handle, | |
| struct efi_system_table *st)) | |
| { | |
| efi_status_t ret = EFI_LOAD_ERROR; | |
| if (entry) | |
| ret = entry(image_handle, st); | |
| st->boottime->exit(image_handle, ret, 0, NULL); | |
| return ret; | |
| } | |
| #ifdef CONFIG_ARM64 | |
| static efi_status_t efi_run_in_el2(EFIAPI efi_status_t (*entry)( | |
| efi_handle_t image_handle, struct efi_system_table *st), | |
| efi_handle_t image_handle, struct efi_system_table *st) | |
| { | |
| /* Enable caches again */ | |
| dcache_enable(); | |
| return efi_do_enter(image_handle, st, entry); | |
| } | |
| #endif | |
| #ifdef CONFIG_ARMV7_NONSEC | |
| static bool is_nonsec; | |
| static efi_status_t efi_run_in_hyp(EFIAPI efi_status_t (*entry)( | |
| efi_handle_t image_handle, struct efi_system_table *st), | |
| efi_handle_t image_handle, struct efi_system_table *st) | |
| { | |
| /* Enable caches again */ | |
| dcache_enable(); | |
| is_nonsec = true; | |
| return efi_do_enter(image_handle, st, entry); | |
| } | |
| #endif | |
| /* | |
| * efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges | |
| * | |
| * The mem_rsv entries of the FDT are added to the memory map. Any failures are | |
| * ignored because this is not critical and we would rather continue to try to | |
| * boot. | |
| * | |
| * @fdt: Pointer to device tree | |
| */ | |
| static void efi_carve_out_dt_rsv(void *fdt) | |
| { | |
| int nr_rsv, i; | |
| uint64_t addr, size, pages; | |
| nr_rsv = fdt_num_mem_rsv(fdt); | |
| /* Look for an existing entry and add it to the efi mem map. */ | |
| for (i = 0; i < nr_rsv; i++) { | |
| if (fdt_get_mem_rsv(fdt, i, &addr, &size) != 0) | |
| continue; | |
| pages = ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT; | |
| if (!efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE, | |
| false)) | |
| printf("FDT memrsv map %d: Failed to add to map\n", i); | |
| } | |
| } | |
| static efi_status_t efi_install_fdt(void *fdt) | |
| { | |
| bootm_headers_t img = { 0 }; | |
| ulong fdt_pages, fdt_size, fdt_start, fdt_end; | |
| efi_status_t ret; | |
| if (fdt_check_header(fdt)) { | |
| printf("ERROR: invalid device tree\n"); | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| /* Prepare fdt for payload */ | |
| fdt = copy_fdt(fdt); | |
| if (!fdt) | |
| return EFI_OUT_OF_RESOURCES; | |
| if (image_setup_libfdt(&img, fdt, 0, NULL)) { | |
| printf("ERROR: failed to process device tree\n"); | |
| return EFI_LOAD_ERROR; | |
| } | |
| efi_carve_out_dt_rsv(fdt); | |
| /* Link to it in the efi tables */ | |
| ret = efi_install_configuration_table(&efi_guid_fdt, fdt); | |
| if (ret != EFI_SUCCESS) | |
| return EFI_OUT_OF_RESOURCES; | |
| /* And reserve the space in the memory map */ | |
| fdt_start = ((ulong)fdt) & ~EFI_PAGE_MASK; | |
| fdt_end = ((ulong)fdt) + fdt_totalsize(fdt); | |
| fdt_size = (fdt_end - fdt_start) + EFI_PAGE_MASK; | |
| fdt_pages = fdt_size >> EFI_PAGE_SHIFT; | |
| /* Give a bootloader the chance to modify the device tree */ | |
| fdt_pages += 2; | |
| ret = efi_add_memory_map(fdt_start, fdt_pages, | |
| EFI_BOOT_SERVICES_DATA, true); | |
| return ret; | |
| } | |
| /* | |
| * Load an EFI payload into a newly allocated piece of memory, register all | |
| * EFI objects it would want to access and jump to it. | |
| */ | |
| static efi_status_t do_bootefi_exec(void *efi, | |
| struct efi_device_path *device_path, | |
| struct efi_device_path *image_path) | |
| { | |
| struct efi_loaded_image loaded_image_info = {}; | |
| struct efi_object loaded_image_info_obj = {}; | |
| struct efi_object mem_obj = {}; | |
| struct efi_device_path *memdp = NULL; | |
| efi_status_t ret; | |
| EFIAPI efi_status_t (*entry)(efi_handle_t image_handle, | |
| struct efi_system_table *st); | |
| /* | |
| * Special case for efi payload not loaded from disk, such as | |
| * 'bootefi hello' or for example payload loaded directly into | |
| * memory via jtag/etc: | |
| */ | |
| if (!device_path && !image_path) { | |
| printf("WARNING: using memory device/image path, this may confuse some payloads!\n"); | |
| /* actual addresses filled in after efi_load_pe() */ | |
| memdp = efi_dp_from_mem(0, 0, 0); | |
| device_path = image_path = memdp; | |
| efi_add_handle(&mem_obj); | |
| ret = efi_add_protocol(mem_obj.handle, &efi_guid_device_path, | |
| device_path); | |
| if (ret != EFI_SUCCESS) | |
| goto exit; | |
| } else { | |
| assert(device_path && image_path); | |
| } | |
| efi_setup_loaded_image(&loaded_image_info, &loaded_image_info_obj, | |
| device_path, image_path); | |
| /* | |
| * gd lives in a fixed register which may get clobbered while we execute | |
| * the payload. So save it here and restore it on every callback entry | |
| */ | |
| efi_save_gd(); | |
| /* Transfer environment variable bootargs as load options */ | |
| set_load_options(&loaded_image_info, "bootargs"); | |
| /* Load the EFI payload */ | |
| entry = efi_load_pe(efi, &loaded_image_info); | |
| if (!entry) { | |
| ret = EFI_LOAD_ERROR; | |
| goto exit; | |
| } | |
| if (memdp) { | |
| struct efi_device_path_memory *mdp = (void *)memdp; | |
| mdp->memory_type = loaded_image_info.image_code_type; | |
| mdp->start_address = (uintptr_t)loaded_image_info.image_base; | |
| mdp->end_address = mdp->start_address + | |
| loaded_image_info.image_size; | |
| } | |
| /* we don't support much: */ | |
| env_set("efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported", | |
| "{ro,boot}(blob)0000000000000000"); | |
| /* Call our payload! */ | |
| debug("%s:%d Jumping to 0x%lx\n", __func__, __LINE__, (long)entry); | |
| if (setjmp(&loaded_image_info.exit_jmp)) { | |
| ret = loaded_image_info.exit_status; | |
| goto exit; | |
| } | |
| #ifdef CONFIG_ARM64 | |
| /* On AArch64 we need to make sure we call our payload in < EL3 */ | |
| if (current_el() == 3) { | |
| smp_kick_all_cpus(); | |
| dcache_disable(); /* flush cache before switch to EL2 */ | |
| /* Move into EL2 and keep running there */ | |
| armv8_switch_to_el2((ulong)entry, | |
| (ulong)&loaded_image_info_obj.handle, | |
| (ulong)&systab, 0, (ulong)efi_run_in_el2, | |
| ES_TO_AARCH64); | |
| /* Should never reach here, efi exits with longjmp */ | |
| while (1) { } | |
| } | |
| #endif | |
| #ifdef CONFIG_ARMV7_NONSEC | |
| if (armv7_boot_nonsec() && !is_nonsec) { | |
| dcache_disable(); /* flush cache before switch to HYP */ | |
| armv7_init_nonsec(); | |
| secure_ram_addr(_do_nonsec_entry)( | |
| efi_run_in_hyp, | |
| (uintptr_t)entry, | |
| (uintptr_t)loaded_image_info_obj.handle, | |
| (uintptr_t)&systab); | |
| /* Should never reach here, efi exits with longjmp */ | |
| while (1) { } | |
| } | |
| #endif | |
| ret = efi_do_enter(loaded_image_info_obj.handle, &systab, entry); | |
| exit: | |
| /* image has returned, loaded-image obj goes *poof*: */ | |
| list_del(&loaded_image_info_obj.link); | |
| if (mem_obj.handle) | |
| list_del(&mem_obj.link); | |
| return ret; | |
| } | |
| static int do_bootefi_bootmgr_exec(void) | |
| { | |
| struct efi_device_path *device_path, *file_path; | |
| void *addr; | |
| efi_status_t r; | |
| /* | |
| * gd lives in a fixed register which may get clobbered while we execute | |
| * the payload. So save it here and restore it on every callback entry | |
| */ | |
| efi_save_gd(); | |
| addr = efi_bootmgr_load(&device_path, &file_path); | |
| if (!addr) | |
| return 1; | |
| printf("## Starting EFI application at %p ...\n", addr); | |
| r = do_bootefi_exec(addr, device_path, file_path); | |
| printf("## Application terminated, r = %lu\n", | |
| r & ~EFI_ERROR_MASK); | |
| if (r != EFI_SUCCESS) | |
| return 1; | |
| return 0; | |
| } | |
| /* Interpreter command to boot an arbitrary EFI image from memory */ | |
| static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | |
| { | |
| unsigned long addr; | |
| char *saddr; | |
| efi_status_t r; | |
| unsigned long fdt_addr; | |
| void *fdt; | |
| /* Allow unaligned memory access */ | |
| allow_unaligned(); | |
| /* Initialize EFI drivers */ | |
| r = efi_init_obj_list(); | |
| if (r != EFI_SUCCESS) { | |
| printf("Error: Cannot set up EFI drivers, r = %lu\n", | |
| r & ~EFI_ERROR_MASK); | |
| return CMD_RET_FAILURE; | |
| } | |
| if (argc < 2) | |
| return CMD_RET_USAGE; | |
| if (argc > 2) { | |
| fdt_addr = simple_strtoul(argv[2], NULL, 16); | |
| if (!fdt_addr && *argv[2] != '0') | |
| return CMD_RET_USAGE; | |
| /* Install device tree */ | |
| fdt = map_sysmem(fdt_addr, 0); | |
| r = efi_install_fdt(fdt); | |
| if (r != EFI_SUCCESS) { | |
| printf("ERROR: failed to install device tree\n"); | |
| return CMD_RET_FAILURE; | |
| } | |
| } else { | |
| /* Remove device tree. EFI_NOT_FOUND can be ignored here */ | |
| efi_install_configuration_table(&efi_guid_fdt, NULL); | |
| printf("WARNING: booting without device tree\n"); | |
| } | |
| #ifdef CONFIG_CMD_BOOTEFI_HELLO | |
| if (!strcmp(argv[1], "hello")) { | |
| ulong size = __efi_helloworld_end - __efi_helloworld_begin; | |
| saddr = env_get("loadaddr"); | |
| if (saddr) | |
| addr = simple_strtoul(saddr, NULL, 16); | |
| else | |
| addr = CONFIG_SYS_LOAD_ADDR; | |
| memcpy(map_sysmem(addr, size), __efi_helloworld_begin, size); | |
| } else | |
| #endif | |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST | |
| if (!strcmp(argv[1], "selftest")) { | |
| struct efi_loaded_image loaded_image_info = {}; | |
| struct efi_object loaded_image_info_obj = {}; | |
| /* Construct a dummy device path. */ | |
| bootefi_device_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, | |
| (uintptr_t)&efi_selftest, | |
| (uintptr_t)&efi_selftest); | |
| bootefi_image_path = efi_dp_from_file(NULL, 0, "\\selftest"); | |
| efi_setup_loaded_image(&loaded_image_info, | |
| &loaded_image_info_obj, | |
| bootefi_device_path, bootefi_image_path); | |
| /* | |
| * gd lives in a fixed register which may get clobbered while we | |
| * execute the payload. So save it here and restore it on every | |
| * callback entry | |
| */ | |
| efi_save_gd(); | |
| /* Transfer environment variable efi_selftest as load options */ | |
| set_load_options(&loaded_image_info, "efi_selftest"); | |
| /* Execute the test */ | |
| r = efi_selftest(loaded_image_info_obj.handle, &systab); | |
| efi_restore_gd(); | |
| free(loaded_image_info.load_options); | |
| list_del(&loaded_image_info_obj.link); | |
| return r != EFI_SUCCESS; | |
| } else | |
| #endif | |
| if (!strcmp(argv[1], "bootmgr")) { | |
| return do_bootefi_bootmgr_exec(); | |
| } else { | |
| saddr = argv[1]; | |
| addr = simple_strtoul(saddr, NULL, 16); | |
| /* Check that a numeric value was passed */ | |
| if (!addr && *saddr != '0') | |
| return CMD_RET_USAGE; | |
| } | |
| printf("## Starting EFI application at %08lx ...\n", addr); | |
| r = do_bootefi_exec(map_sysmem(addr, 0), bootefi_device_path, | |
| bootefi_image_path); | |
| printf("## Application terminated, r = %lu\n", | |
| r & ~EFI_ERROR_MASK); | |
| if (r != EFI_SUCCESS) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| #ifdef CONFIG_SYS_LONGHELP | |
| static char bootefi_help_text[] = | |
| "<image address> [fdt address]\n" | |
| " - boot EFI payload stored at address <image address>.\n" | |
| " If specified, the device tree located at <fdt address> gets\n" | |
| " exposed as EFI configuration table.\n" | |
| #ifdef CONFIG_CMD_BOOTEFI_HELLO | |
| "bootefi hello\n" | |
| " - boot a sample Hello World application stored within U-Boot\n" | |
| #endif | |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST | |
| "bootefi selftest [fdt address]\n" | |
| " - boot an EFI selftest application stored within U-Boot\n" | |
| " Use environment variable efi_selftest to select a single test.\n" | |
| " Use 'setenv efi_selftest list' to enumerate all tests.\n" | |
| #endif | |
| "bootefi bootmgr [fdt addr]\n" | |
| " - load and boot EFI payload based on BootOrder/BootXXXX variables.\n" | |
| "\n" | |
| " If specified, the device tree located at <fdt address> gets\n" | |
| " exposed as EFI configuration table.\n"; | |
| #endif | |
| U_BOOT_CMD( | |
| bootefi, 3, 0, do_bootefi, | |
| "Boots an EFI payload from memory", | |
| bootefi_help_text | |
| ); | |
| void efi_set_bootdev(const char *dev, const char *devnr, const char *path) | |
| { | |
| char filename[32] = { 0 }; /* dp->str is u16[32] long */ | |
| char *s; | |
| if (strcmp(dev, "Net")) { | |
| struct blk_desc *desc; | |
| disk_partition_t fs_partition; | |
| int part; | |
| part = blk_get_device_part_str(dev, devnr, &desc, &fs_partition, | |
| 1); | |
| if (part < 0) | |
| return; | |
| bootefi_device_path = efi_dp_from_part(desc, part); | |
| } else { | |
| #ifdef CONFIG_NET | |
| bootefi_device_path = efi_dp_from_eth(); | |
| #endif | |
| } | |
| if (!path) | |
| return; | |
| if (strcmp(dev, "Net")) { | |
| /* Add leading / to fs paths, because they're absolute */ | |
| snprintf(filename, sizeof(filename), "/%s", path); | |
| } else { | |
| snprintf(filename, sizeof(filename), "%s", path); | |
| } | |
| /* DOS style file path: */ | |
| s = filename; | |
| while ((s = strchr(s, '/'))) | |
| *s++ = '\\'; | |
| bootefi_image_path = efi_dp_from_file(NULL, 0, filename); | |
| } |