| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (c) 2013, Google Inc. | |
| * | |
| * (C) Copyright 2008 Semihalf | |
| * | |
| * (C) Copyright 2000-2006 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| */ | |
| #include <common.h> | |
| #include <fdt_support.h> | |
| #include <fdtdec.h> | |
| #include <env.h> | |
| #include <errno.h> | |
| #include <image.h> | |
| #include <lmb.h> | |
| #include <log.h> | |
| #include <malloc.h> | |
| #include <asm/global_data.h> | |
| #include <linux/libfdt.h> | |
| #include <mapmem.h> | |
| #include <asm/io.h> | |
| #include <dm/ofnode.h> | |
| #include <tee/optee.h> | |
| /* adding a ramdisk needs 0x44 bytes in version 2008.10 */ | |
| #define FDT_RAMDISK_OVERHEAD 0x80 | |
| DECLARE_GLOBAL_DATA_PTR; | |
| static void fdt_error(const char *msg) | |
| { | |
| puts("ERROR: "); | |
| puts(msg); | |
| puts(" - must RESET the board to recover.\n"); | |
| } | |
| #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) | |
| static const struct legacy_img_hdr *image_get_fdt(ulong fdt_addr) | |
| { | |
| const struct legacy_img_hdr *fdt_hdr = map_sysmem(fdt_addr, 0); | |
| image_print_contents(fdt_hdr); | |
| puts(" Verifying Checksum ... "); | |
| if (!image_check_hcrc(fdt_hdr)) { | |
| fdt_error("fdt header checksum invalid"); | |
| return NULL; | |
| } | |
| if (!image_check_dcrc(fdt_hdr)) { | |
| fdt_error("fdt checksum invalid"); | |
| return NULL; | |
| } | |
| puts("OK\n"); | |
| if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) { | |
| fdt_error("uImage is not a fdt"); | |
| return NULL; | |
| } | |
| if (image_get_comp(fdt_hdr) != IH_COMP_NONE) { | |
| fdt_error("uImage is compressed"); | |
| return NULL; | |
| } | |
| if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) { | |
| fdt_error("uImage data is not a fdt"); | |
| return NULL; | |
| } | |
| return fdt_hdr; | |
| } | |
| #endif | |
| static void boot_fdt_reserve_region(struct lmb *lmb, uint64_t addr, | |
| uint64_t size, enum lmb_flags flags) | |
| { | |
| long ret; | |
| ret = lmb_reserve_flags(lmb, addr, size, flags); | |
| if (ret >= 0) { | |
| debug(" reserving fdt memory region: addr=%llx size=%llx flags=%x\n", | |
| (unsigned long long)addr, | |
| (unsigned long long)size, flags); | |
| } else { | |
| puts("ERROR: reserving fdt memory region failed "); | |
| printf("(addr=%llx size=%llx flags=%x)\n", | |
| (unsigned long long)addr, | |
| (unsigned long long)size, flags); | |
| } | |
| } | |
| /** | |
| * boot_fdt_add_mem_rsv_regions - Mark the memreserve and reserved-memory | |
| * sections as unusable | |
| * @lmb: pointer to lmb handle, will be used for memory mgmt | |
| * @fdt_blob: pointer to fdt blob base address | |
| * | |
| * Adds the and reserved-memorymemreserve regions in the dtb to the lmb block. | |
| * Adding the memreserve regions prevents u-boot from using them to store the | |
| * initrd or the fdt blob. | |
| */ | |
| void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) | |
| { | |
| uint64_t addr, size; | |
| int i, total, ret; | |
| int nodeoffset, subnode; | |
| struct fdt_resource res; | |
| enum lmb_flags flags; | |
| if (fdt_check_header(fdt_blob) != 0) | |
| return; | |
| /* process memreserve sections */ | |
| total = fdt_num_mem_rsv(fdt_blob); | |
| for (i = 0; i < total; i++) { | |
| if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0) | |
| continue; | |
| boot_fdt_reserve_region(lmb, addr, size, LMB_NONE); | |
| } | |
| /* process reserved-memory */ | |
| nodeoffset = fdt_subnode_offset(fdt_blob, 0, "reserved-memory"); | |
| if (nodeoffset >= 0) { | |
| subnode = fdt_first_subnode(fdt_blob, nodeoffset); | |
| while (subnode >= 0) { | |
| /* check if this subnode has a reg property */ | |
| ret = fdt_get_resource(fdt_blob, subnode, "reg", 0, | |
| &res); | |
| if (!ret && fdtdec_get_is_enabled(fdt_blob, subnode)) { | |
| flags = LMB_NONE; | |
| if (fdtdec_get_bool(fdt_blob, subnode, | |
| "no-map")) | |
| flags = LMB_NOMAP; | |
| addr = res.start; | |
| size = res.end - res.start + 1; | |
| boot_fdt_reserve_region(lmb, addr, size, flags); | |
| } | |
| subnode = fdt_next_subnode(fdt_blob, subnode); | |
| } | |
| } | |
| } | |
| /** | |
| * boot_relocate_fdt - relocate flat device tree | |
| * @lmb: pointer to lmb handle, will be used for memory mgmt | |
| * @of_flat_tree: pointer to a char* variable, will hold fdt start address | |
| * @of_size: pointer to a ulong variable, will hold fdt length | |
| * | |
| * boot_relocate_fdt() allocates a region of memory within the bootmap and | |
| * relocates the of_flat_tree into that region, even if the fdt is already in | |
| * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD | |
| * bytes. | |
| * | |
| * of_flat_tree and of_size are set to final (after relocation) values | |
| * | |
| * returns: | |
| * 0 - success | |
| * 1 - failure | |
| */ | |
| int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) | |
| { | |
| void *fdt_blob = *of_flat_tree; | |
| void *of_start = NULL; | |
| u64 start, size, usable; | |
| char *fdt_high; | |
| ulong mapsize, low; | |
| ulong of_len = 0; | |
| int bank; | |
| int err; | |
| int disable_relocation = 0; | |
| /* nothing to do */ | |
| if (*of_size == 0) | |
| return 0; | |
| if (fdt_check_header(fdt_blob) != 0) { | |
| fdt_error("image is not a fdt"); | |
| goto error; | |
| } | |
| /* position on a 4K boundary before the alloc_current */ | |
| /* Pad the FDT by a specified amount */ | |
| of_len = *of_size + CONFIG_SYS_FDT_PAD; | |
| /* If fdt_high is set use it to select the relocation address */ | |
| fdt_high = env_get("fdt_high"); | |
| if (fdt_high) { | |
| ulong desired_addr = hextoul(fdt_high, NULL); | |
| ulong addr; | |
| if (desired_addr == ~0UL) { | |
| /* All ones means use fdt in place */ | |
| of_start = fdt_blob; | |
| lmb_reserve(lmb, map_to_sysmem(of_start), of_len); | |
| disable_relocation = 1; | |
| } else if (desired_addr) { | |
| addr = lmb_alloc_base(lmb, of_len, 0x1000, | |
| desired_addr); | |
| of_start = map_sysmem(addr, of_len); | |
| if (of_start == NULL) { | |
| puts("Failed using fdt_high value for Device Tree"); | |
| goto error; | |
| } | |
| } else { | |
| addr = lmb_alloc(lmb, of_len, 0x1000); | |
| of_start = map_sysmem(addr, of_len); | |
| } | |
| } else { | |
| mapsize = env_get_bootm_mapsize(); | |
| low = env_get_bootm_low(); | |
| of_start = NULL; | |
| for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { | |
| start = gd->bd->bi_dram[bank].start; | |
| size = gd->bd->bi_dram[bank].size; | |
| /* DRAM bank addresses are too low, skip it. */ | |
| if (start + size < low) | |
| continue; | |
| usable = min(size, (u64)mapsize); | |
| /* | |
| * At least part of this DRAM bank is usable, try | |
| * using it for LMB allocation. | |
| */ | |
| of_start = map_sysmem((ulong)lmb_alloc_base(lmb, | |
| of_len, 0x1000, start + usable), of_len); | |
| /* Allocation succeeded, use this block. */ | |
| if (of_start != NULL) | |
| break; | |
| /* | |
| * Reduce the mapping size in the next bank | |
| * by the size of attempt in current bank. | |
| */ | |
| mapsize -= usable - max(start, (u64)low); | |
| if (!mapsize) | |
| break; | |
| } | |
| } | |
| if (of_start == NULL) { | |
| puts("device tree - allocation error\n"); | |
| goto error; | |
| } | |
| if (disable_relocation) { | |
| /* | |
| * We assume there is space after the existing fdt to use | |
| * for padding | |
| */ | |
| fdt_set_totalsize(of_start, of_len); | |
| printf(" Using Device Tree in place at %p, end %p\n", | |
| of_start, of_start + of_len - 1); | |
| } else { | |
| debug("## device tree at %p ... %p (len=%ld [0x%lX])\n", | |
| fdt_blob, fdt_blob + *of_size - 1, of_len, of_len); | |
| printf(" Loading Device Tree to %p, end %p ... ", | |
| of_start, of_start + of_len - 1); | |
| err = fdt_open_into(fdt_blob, of_start, of_len); | |
| if (err != 0) { | |
| fdt_error("fdt move failed"); | |
| goto error; | |
| } | |
| puts("OK\n"); | |
| } | |
| *of_flat_tree = of_start; | |
| *of_size = of_len; | |
| if (CONFIG_IS_ENABLED(CMD_FDT)) | |
| set_working_fdt_addr(map_to_sysmem(*of_flat_tree)); | |
| return 0; | |
| error: | |
| return 1; | |
| } | |
| /** | |
| * select_fdt() - Select and locate the FDT to use | |
| * | |
| * @images: pointer to the bootm images structure | |
| * @select: name of FDT to select, or NULL for any | |
| * @arch: expected FDT architecture | |
| * @fdt_addrp: pointer to a ulong variable, will hold FDT pointer | |
| * Return: 0 if OK, -ENOPKG if no FDT (but an error should not be reported), | |
| * other -ve value on other error | |
| */ | |
| static int select_fdt(struct bootm_headers *images, const char *select, u8 arch, | |
| ulong *fdt_addrp) | |
| { | |
| const char *buf; | |
| ulong fdt_addr; | |
| #if CONFIG_IS_ENABLED(FIT) | |
| const char *fit_uname_config = images->fit_uname_cfg; | |
| const char *fit_uname_fdt = NULL; | |
| ulong default_addr; | |
| int fdt_noffset; | |
| if (select) { | |
| /* | |
| * If the FDT blob comes from the FIT image and the | |
| * FIT image address is omitted in the command line | |
| * argument, try to use ramdisk or os FIT image | |
| * address or default load address. | |
| */ | |
| if (images->fit_uname_rd) | |
| default_addr = (ulong)images->fit_hdr_rd; | |
| else if (images->fit_uname_os) | |
| default_addr = (ulong)images->fit_hdr_os; | |
| else | |
| default_addr = image_load_addr; | |
| if (fit_parse_conf(select, default_addr, &fdt_addr, | |
| &fit_uname_config)) { | |
| debug("* fdt: config '%s' from image at 0x%08lx\n", | |
| fit_uname_config, fdt_addr); | |
| } else if (fit_parse_subimage(select, default_addr, &fdt_addr, | |
| &fit_uname_fdt)) { | |
| debug("* fdt: subimage '%s' from image at 0x%08lx\n", | |
| fit_uname_fdt, fdt_addr); | |
| } else | |
| #endif | |
| { | |
| fdt_addr = hextoul(select, NULL); | |
| debug("* fdt: cmdline image address = 0x%08lx\n", | |
| fdt_addr); | |
| } | |
| #if CONFIG_IS_ENABLED(FIT) | |
| } else { | |
| /* use FIT configuration provided in first bootm | |
| * command argument | |
| */ | |
| fdt_addr = map_to_sysmem(images->fit_hdr_os); | |
| fdt_noffset = fit_get_node_from_config(images, FIT_FDT_PROP, | |
| fdt_addr); | |
| if (fdt_noffset == -ENOENT) | |
| return -ENOPKG; | |
| else if (fdt_noffset < 0) | |
| return fdt_noffset; | |
| } | |
| #endif | |
| debug("## Checking for 'FDT'/'FDT Image' at %08lx\n", | |
| fdt_addr); | |
| /* | |
| * Check if there is an FDT image at the | |
| * address provided in the second bootm argument | |
| * check image type, for FIT images get a FIT node. | |
| */ | |
| buf = map_sysmem(fdt_addr, 0); | |
| switch (genimg_get_format(buf)) { | |
| #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) | |
| case IMAGE_FORMAT_LEGACY: { | |
| const struct legacy_img_hdr *fdt_hdr; | |
| ulong load, load_end; | |
| ulong image_start, image_data, image_end; | |
| /* verify fdt_addr points to a valid image header */ | |
| printf("## Flattened Device Tree from Legacy Image at %08lx\n", | |
| fdt_addr); | |
| fdt_hdr = image_get_fdt(fdt_addr); | |
| if (!fdt_hdr) | |
| return -ENOPKG; | |
| /* | |
| * move image data to the load address, | |
| * make sure we don't overwrite initial image | |
| */ | |
| image_start = (ulong)fdt_hdr; | |
| image_data = (ulong)image_get_data(fdt_hdr); | |
| image_end = image_get_image_end(fdt_hdr); | |
| load = image_get_load(fdt_hdr); | |
| load_end = load + image_get_data_size(fdt_hdr); | |
| if (load == image_start || | |
| load == image_data) { | |
| fdt_addr = load; | |
| break; | |
| } | |
| if ((load < image_end) && (load_end > image_start)) { | |
| fdt_error("fdt overwritten"); | |
| return -EFAULT; | |
| } | |
| debug(" Loading FDT from 0x%08lx to 0x%08lx\n", | |
| image_data, load); | |
| memmove((void *)load, | |
| (void *)image_data, | |
| image_get_data_size(fdt_hdr)); | |
| fdt_addr = load; | |
| break; | |
| } | |
| #endif | |
| case IMAGE_FORMAT_FIT: | |
| /* | |
| * This case will catch both: new uImage format | |
| * (libfdt based) and raw FDT blob (also libfdt | |
| * based). | |
| */ | |
| #if CONFIG_IS_ENABLED(FIT) | |
| /* check FDT blob vs FIT blob */ | |
| if (!fit_check_format(buf, IMAGE_SIZE_INVAL)) { | |
| ulong load, len; | |
| fdt_noffset = boot_get_fdt_fit(images, fdt_addr, | |
| &fit_uname_fdt, | |
| &fit_uname_config, | |
| arch, &load, &len); | |
| if (fdt_noffset < 0) | |
| return -ENOENT; | |
| images->fit_hdr_fdt = map_sysmem(fdt_addr, 0); | |
| images->fit_uname_fdt = fit_uname_fdt; | |
| images->fit_noffset_fdt = fdt_noffset; | |
| fdt_addr = load; | |
| break; | |
| } else | |
| #endif | |
| { | |
| /* | |
| * FDT blob | |
| */ | |
| debug("* fdt: raw FDT blob\n"); | |
| printf("## Flattened Device Tree blob at %08lx\n", | |
| (long)fdt_addr); | |
| } | |
| break; | |
| default: | |
| puts("ERROR: Did not find a cmdline Flattened Device Tree\n"); | |
| return -ENOENT; | |
| } | |
| *fdt_addrp = fdt_addr; | |
| return 0; | |
| } | |
| /** | |
| * boot_get_fdt - main fdt handling routine | |
| * @argc: command argument count | |
| * @argv: command argument list | |
| * @arch: architecture (IH_ARCH_...) | |
| * @images: pointer to the bootm images structure | |
| * @of_flat_tree: pointer to a char* variable, will hold fdt start address | |
| * @of_size: pointer to a ulong variable, will hold fdt length | |
| * | |
| * boot_get_fdt() is responsible for finding a valid flat device tree image. | |
| * Currently supported are the following ramdisk sources: | |
| * - multicomponent kernel/ramdisk image, | |
| * - commandline provided address of decicated ramdisk image. | |
| * | |
| * returns: | |
| * 0, if fdt image was found and valid, or skipped | |
| * of_flat_tree and of_size are set to fdt start address and length if | |
| * fdt image is found and valid | |
| * | |
| * 1, if fdt image is found but corrupted | |
| * of_flat_tree and of_size are set to 0 if no fdt exists | |
| */ | |
| int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch, | |
| struct bootm_headers *images, char **of_flat_tree, ulong *of_size) | |
| { | |
| ulong img_addr; | |
| ulong fdt_addr; | |
| char *fdt_blob = NULL; | |
| void *buf; | |
| const char *select = NULL; | |
| *of_flat_tree = NULL; | |
| *of_size = 0; | |
| img_addr = (argc == 0) ? image_load_addr : hextoul(argv[0], NULL); | |
| buf = map_sysmem(img_addr, 0); | |
| if (argc > 2) | |
| select = argv[2]; | |
| if (select || genimg_has_config(images)) { | |
| int ret; | |
| ret = select_fdt(images, select, arch, &fdt_addr); | |
| if (ret == -ENOPKG) | |
| goto no_fdt; | |
| else if (ret) | |
| return 1; | |
| printf(" Booting using the fdt blob at %#08lx\n", fdt_addr); | |
| fdt_blob = map_sysmem(fdt_addr, 0); | |
| } else if (images->legacy_hdr_valid && | |
| image_check_type(&images->legacy_hdr_os_copy, | |
| IH_TYPE_MULTI)) { | |
| ulong fdt_data, fdt_len; | |
| /* | |
| * Now check if we have a legacy multi-component image, | |
| * get second entry data start address and len. | |
| */ | |
| printf("## Flattened Device Tree from multi component Image at %08lX\n", | |
| (ulong)images->legacy_hdr_os); | |
| image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data, | |
| &fdt_len); | |
| if (fdt_len) { | |
| fdt_blob = (char *)fdt_data; | |
| printf(" Booting using the fdt at 0x%p\n", fdt_blob); | |
| if (fdt_check_header(fdt_blob) != 0) { | |
| fdt_error("image is not a fdt"); | |
| goto error; | |
| } | |
| if (fdt_totalsize(fdt_blob) != fdt_len) { | |
| fdt_error("fdt size != image size"); | |
| goto error; | |
| } | |
| } else { | |
| debug("## No Flattened Device Tree\n"); | |
| goto no_fdt; | |
| } | |
| #ifdef CONFIG_ANDROID_BOOT_IMAGE | |
| } else if (genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) { | |
| struct andr_img_hdr *hdr = buf; | |
| ulong fdt_data, fdt_len; | |
| u32 fdt_size, dtb_idx; | |
| /* | |
| * Firstly check if this android boot image has dtb field. | |
| */ | |
| dtb_idx = (u32)env_get_ulong("adtb_idx", 10, 0); | |
| if (android_image_get_dtb_by_index((ulong)hdr, dtb_idx, &fdt_addr, &fdt_size)) { | |
| fdt_blob = (char *)map_sysmem(fdt_addr, 0); | |
| if (fdt_check_header(fdt_blob)) | |
| goto no_fdt; | |
| debug("## Using FDT in Android image dtb area with idx %u\n", dtb_idx); | |
| } else if (!android_image_get_second(hdr, &fdt_data, &fdt_len) && | |
| !fdt_check_header((char *)fdt_data)) { | |
| fdt_blob = (char *)fdt_data; | |
| if (fdt_totalsize(fdt_blob) != fdt_len) | |
| goto error; | |
| debug("## Using FDT in Android image second area\n"); | |
| } else { | |
| fdt_addr = env_get_hex("fdtaddr", 0); | |
| if (!fdt_addr) | |
| goto no_fdt; | |
| fdt_blob = map_sysmem(fdt_addr, 0); | |
| if (fdt_check_header(fdt_blob)) | |
| goto no_fdt; | |
| debug("## Using FDT at ${fdtaddr}=Ox%lx\n", fdt_addr); | |
| } | |
| #endif | |
| } else { | |
| debug("## No Flattened Device Tree\n"); | |
| goto no_fdt; | |
| } | |
| *of_flat_tree = fdt_blob; | |
| *of_size = fdt_totalsize(fdt_blob); | |
| debug(" of_flat_tree at 0x%08lx size 0x%08lx\n", | |
| (ulong)*of_flat_tree, *of_size); | |
| return 0; | |
| no_fdt: | |
| debug("Continuing to boot without FDT\n"); | |
| return 0; | |
| error: | |
| return 1; | |
| } | |
| /* | |
| * Verify the device tree. | |
| * | |
| * This function is called after all device tree fix-ups have been enacted, | |
| * so that the final device tree can be verified. The definition of "verified" | |
| * is up to the specific implementation. However, it generally means that the | |
| * addresses of some of the devices in the device tree are compared with the | |
| * actual addresses at which U-Boot has placed them. | |
| * | |
| * Returns 1 on success, 0 on failure. If 0 is returned, U-Boot will halt the | |
| * boot process. | |
| */ | |
| __weak int ft_verify_fdt(void *fdt) | |
| { | |
| return 1; | |
| } | |
| __weak int arch_fixup_fdt(void *blob) | |
| { | |
| return 0; | |
| } | |
| int image_setup_libfdt(struct bootm_headers *images, void *blob, | |
| int of_size, struct lmb *lmb) | |
| { | |
| ulong *initrd_start = &images->initrd_start; | |
| ulong *initrd_end = &images->initrd_end; | |
| int ret = -EPERM; | |
| int fdt_ret; | |
| if (fdt_root(blob) < 0) { | |
| printf("ERROR: root node setup failed\n"); | |
| goto err; | |
| } | |
| if (fdt_chosen(blob) < 0) { | |
| printf("ERROR: /chosen node create failed\n"); | |
| goto err; | |
| } | |
| if (arch_fixup_fdt(blob) < 0) { | |
| printf("ERROR: arch-specific fdt fixup failed\n"); | |
| goto err; | |
| } | |
| fdt_ret = optee_copy_fdt_nodes(blob); | |
| if (fdt_ret) { | |
| printf("ERROR: transfer of optee nodes to new fdt failed: %s\n", | |
| fdt_strerror(fdt_ret)); | |
| goto err; | |
| } | |
| /* Store name of configuration node as u-boot,bootconf in /chosen node */ | |
| if (images->fit_uname_cfg) | |
| fdt_find_and_setprop(blob, "/chosen", "u-boot,bootconf", | |
| images->fit_uname_cfg, | |
| strlen(images->fit_uname_cfg) + 1, 1); | |
| /* Update ethernet nodes */ | |
| fdt_fixup_ethernet(blob); | |
| #if CONFIG_IS_ENABLED(CMD_PSTORE) | |
| /* Append PStore configuration */ | |
| fdt_fixup_pstore(blob); | |
| #endif | |
| if (IS_ENABLED(CONFIG_OF_BOARD_SETUP)) { | |
| const char *skip_board_fixup; | |
| skip_board_fixup = env_get("skip_board_fixup"); | |
| if (skip_board_fixup && ((int)simple_strtol(skip_board_fixup, NULL, 10) == 1)) { | |
| printf("skip board fdt fixup\n"); | |
| } else { | |
| fdt_ret = ft_board_setup(blob, gd->bd); | |
| if (fdt_ret) { | |
| printf("ERROR: board-specific fdt fixup failed: %s\n", | |
| fdt_strerror(fdt_ret)); | |
| goto err; | |
| } | |
| } | |
| } | |
| if (IS_ENABLED(CONFIG_OF_SYSTEM_SETUP)) { | |
| fdt_ret = ft_system_setup(blob, gd->bd); | |
| if (fdt_ret) { | |
| printf("ERROR: system-specific fdt fixup failed: %s\n", | |
| fdt_strerror(fdt_ret)); | |
| goto err; | |
| } | |
| } | |
| if (!of_live_active() && CONFIG_IS_ENABLED(EVENT)) { | |
| struct event_ft_fixup fixup; | |
| fixup.tree = oftree_from_fdt(blob); | |
| fixup.images = images; | |
| if (oftree_valid(fixup.tree)) { | |
| ret = event_notify(EVT_FT_FIXUP, &fixup, sizeof(fixup)); | |
| if (ret) { | |
| printf("ERROR: fdt fixup event failed: %d\n", | |
| ret); | |
| goto err; | |
| } | |
| } | |
| } | |
| /* Delete the old LMB reservation */ | |
| if (lmb) | |
| lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob, | |
| (phys_size_t)fdt_totalsize(blob)); | |
| ret = fdt_shrink_to_minimum(blob, 0); | |
| if (ret < 0) | |
| goto err; | |
| of_size = ret; | |
| if (*initrd_start && *initrd_end) { | |
| of_size += FDT_RAMDISK_OVERHEAD; | |
| fdt_set_totalsize(blob, of_size); | |
| } | |
| /* Create a new LMB reservation */ | |
| if (lmb) | |
| lmb_reserve(lmb, (ulong)blob, of_size); | |
| fdt_initrd(blob, *initrd_start, *initrd_end); | |
| if (!ft_verify_fdt(blob)) | |
| goto err; | |
| #if defined(CONFIG_ARCH_KEYSTONE) | |
| if (IS_ENABLED(CONFIG_OF_BOARD_SETUP)) | |
| ft_board_setup_ex(blob, gd->bd); | |
| #endif | |
| return 0; | |
| err: | |
| printf(" - must RESET the board to recover.\n\n"); | |
| return ret; | |
| } |