| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> | |
| * Andreas Heppel <aheppel@sysgo.de> | |
| * | |
| * (C) Copyright 2002 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. | |
| */ | |
| /* | |
| * PCI routines | |
| */ | |
| #include <common.h> | |
| #include <bootretry.h> | |
| #include <cli.h> | |
| #include <command.h> | |
| #include <console.h> | |
| #include <dm.h> | |
| #include <init.h> | |
| #include <asm/processor.h> | |
| #include <asm/io.h> | |
| #include <pci.h> | |
| struct pci_reg_info { | |
| const char *name; | |
| enum pci_size_t size; | |
| u8 offset; | |
| }; | |
| static int pci_byte_size(enum pci_size_t size) | |
| { | |
| switch (size) { | |
| case PCI_SIZE_8: | |
| return 1; | |
| case PCI_SIZE_16: | |
| return 2; | |
| case PCI_SIZE_32: | |
| default: | |
| return 4; | |
| } | |
| } | |
| static int pci_field_width(enum pci_size_t size) | |
| { | |
| return pci_byte_size(size) * 2; | |
| } | |
| static void pci_show_regs(struct udevice *dev, struct pci_reg_info *regs) | |
| { | |
| for (; regs->name; regs++) { | |
| unsigned long val; | |
| dm_pci_read_config(dev, regs->offset, &val, regs->size); | |
| printf(" %s =%*s%#.*lx\n", regs->name, | |
| (int)(28 - strlen(regs->name)), "", | |
| pci_field_width(regs->size), val); | |
| } | |
| } | |
| static int pci_bar_show(struct udevice *dev) | |
| { | |
| u8 header_type; | |
| int bar_cnt, bar_id, mem_type; | |
| bool is_64, is_io; | |
| u32 base_low, base_high; | |
| u32 size_low, size_high; | |
| u64 base, size; | |
| u32 reg_addr; | |
| int prefetchable; | |
| dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type); | |
| header_type &= 0x7f; | |
| if (header_type == PCI_HEADER_TYPE_CARDBUS) { | |
| printf("CardBus doesn't support BARs\n"); | |
| return -ENOSYS; | |
| } else if (header_type != PCI_HEADER_TYPE_NORMAL && | |
| header_type != PCI_HEADER_TYPE_BRIDGE) { | |
| printf("unknown header type\n"); | |
| return -ENOSYS; | |
| } | |
| bar_cnt = (header_type == PCI_HEADER_TYPE_NORMAL) ? 6 : 2; | |
| printf("ID Base Size Width Type\n"); | |
| printf("----------------------------------------------------------\n"); | |
| bar_id = 0; | |
| reg_addr = PCI_BASE_ADDRESS_0; | |
| while (bar_cnt) { | |
| dm_pci_read_config32(dev, reg_addr, &base_low); | |
| dm_pci_write_config32(dev, reg_addr, 0xffffffff); | |
| dm_pci_read_config32(dev, reg_addr, &size_low); | |
| dm_pci_write_config32(dev, reg_addr, base_low); | |
| reg_addr += 4; | |
| base = base_low & ~0xf; | |
| size = size_low & ~0xf; | |
| base_high = 0x0; | |
| size_high = 0xffffffff; | |
| is_64 = 0; | |
| prefetchable = base_low & PCI_BASE_ADDRESS_MEM_PREFETCH; | |
| is_io = base_low & PCI_BASE_ADDRESS_SPACE_IO; | |
| mem_type = base_low & PCI_BASE_ADDRESS_MEM_TYPE_MASK; | |
| if (mem_type == PCI_BASE_ADDRESS_MEM_TYPE_64) { | |
| dm_pci_read_config32(dev, reg_addr, &base_high); | |
| dm_pci_write_config32(dev, reg_addr, 0xffffffff); | |
| dm_pci_read_config32(dev, reg_addr, &size_high); | |
| dm_pci_write_config32(dev, reg_addr, base_high); | |
| bar_cnt--; | |
| reg_addr += 4; | |
| is_64 = 1; | |
| } | |
| base = base | ((u64)base_high << 32); | |
| size = size | ((u64)size_high << 32); | |
| if ((!is_64 && size_low) || (is_64 && size)) { | |
| size = ~size + 1; | |
| printf(" %d %#018llx %#018llx %d %s %s\n", | |
| bar_id, (unsigned long long)base, | |
| (unsigned long long)size, is_64 ? 64 : 32, | |
| is_io ? "I/O" : "MEM", | |
| prefetchable ? "Prefetchable" : ""); | |
| } | |
| bar_id++; | |
| bar_cnt--; | |
| } | |
| return 0; | |
| } | |
| static struct pci_reg_info regs_start[] = { | |
| { "vendor ID", PCI_SIZE_16, PCI_VENDOR_ID }, | |
| { "device ID", PCI_SIZE_16, PCI_DEVICE_ID }, | |
| { "command register ID", PCI_SIZE_16, PCI_COMMAND }, | |
| { "status register", PCI_SIZE_16, PCI_STATUS }, | |
| { "revision ID", PCI_SIZE_8, PCI_REVISION_ID }, | |
| {}, | |
| }; | |
| static struct pci_reg_info regs_rest[] = { | |
| { "sub class code", PCI_SIZE_8, PCI_CLASS_SUB_CODE }, | |
| { "programming interface", PCI_SIZE_8, PCI_CLASS_PROG }, | |
| { "cache line", PCI_SIZE_8, PCI_CACHE_LINE_SIZE }, | |
| { "latency time", PCI_SIZE_8, PCI_LATENCY_TIMER }, | |
| { "header type", PCI_SIZE_8, PCI_HEADER_TYPE }, | |
| { "BIST", PCI_SIZE_8, PCI_BIST }, | |
| { "base address 0", PCI_SIZE_32, PCI_BASE_ADDRESS_0 }, | |
| {}, | |
| }; | |
| static struct pci_reg_info regs_normal[] = { | |
| { "base address 1", PCI_SIZE_32, PCI_BASE_ADDRESS_1 }, | |
| { "base address 2", PCI_SIZE_32, PCI_BASE_ADDRESS_2 }, | |
| { "base address 3", PCI_SIZE_32, PCI_BASE_ADDRESS_3 }, | |
| { "base address 4", PCI_SIZE_32, PCI_BASE_ADDRESS_4 }, | |
| { "base address 5", PCI_SIZE_32, PCI_BASE_ADDRESS_5 }, | |
| { "cardBus CIS pointer", PCI_SIZE_32, PCI_CARDBUS_CIS }, | |
| { "sub system vendor ID", PCI_SIZE_16, PCI_SUBSYSTEM_VENDOR_ID }, | |
| { "sub system ID", PCI_SIZE_16, PCI_SUBSYSTEM_ID }, | |
| { "expansion ROM base address", PCI_SIZE_32, PCI_ROM_ADDRESS }, | |
| { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE }, | |
| { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN }, | |
| { "min Grant", PCI_SIZE_8, PCI_MIN_GNT }, | |
| { "max Latency", PCI_SIZE_8, PCI_MAX_LAT }, | |
| {}, | |
| }; | |
| static struct pci_reg_info regs_bridge[] = { | |
| { "base address 1", PCI_SIZE_32, PCI_BASE_ADDRESS_1 }, | |
| { "primary bus number", PCI_SIZE_8, PCI_PRIMARY_BUS }, | |
| { "secondary bus number", PCI_SIZE_8, PCI_SECONDARY_BUS }, | |
| { "subordinate bus number", PCI_SIZE_8, PCI_SUBORDINATE_BUS }, | |
| { "secondary latency timer", PCI_SIZE_8, PCI_SEC_LATENCY_TIMER }, | |
| { "IO base", PCI_SIZE_8, PCI_IO_BASE }, | |
| { "IO limit", PCI_SIZE_8, PCI_IO_LIMIT }, | |
| { "secondary status", PCI_SIZE_16, PCI_SEC_STATUS }, | |
| { "memory base", PCI_SIZE_16, PCI_MEMORY_BASE }, | |
| { "memory limit", PCI_SIZE_16, PCI_MEMORY_LIMIT }, | |
| { "prefetch memory base", PCI_SIZE_16, PCI_PREF_MEMORY_BASE }, | |
| { "prefetch memory limit", PCI_SIZE_16, PCI_PREF_MEMORY_LIMIT }, | |
| { "prefetch memory base upper", PCI_SIZE_32, PCI_PREF_BASE_UPPER32 }, | |
| { "prefetch memory limit upper", PCI_SIZE_32, PCI_PREF_LIMIT_UPPER32 }, | |
| { "IO base upper 16 bits", PCI_SIZE_16, PCI_IO_BASE_UPPER16 }, | |
| { "IO limit upper 16 bits", PCI_SIZE_16, PCI_IO_LIMIT_UPPER16 }, | |
| { "expansion ROM base address", PCI_SIZE_32, PCI_ROM_ADDRESS1 }, | |
| { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE }, | |
| { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN }, | |
| { "bridge control", PCI_SIZE_16, PCI_BRIDGE_CONTROL }, | |
| {}, | |
| }; | |
| static struct pci_reg_info regs_cardbus[] = { | |
| { "capabilities", PCI_SIZE_8, PCI_CB_CAPABILITY_LIST }, | |
| { "secondary status", PCI_SIZE_16, PCI_CB_SEC_STATUS }, | |
| { "primary bus number", PCI_SIZE_8, PCI_CB_PRIMARY_BUS }, | |
| { "CardBus number", PCI_SIZE_8, PCI_CB_CARD_BUS }, | |
| { "subordinate bus number", PCI_SIZE_8, PCI_CB_SUBORDINATE_BUS }, | |
| { "CardBus latency timer", PCI_SIZE_8, PCI_CB_LATENCY_TIMER }, | |
| { "CardBus memory base 0", PCI_SIZE_32, PCI_CB_MEMORY_BASE_0 }, | |
| { "CardBus memory limit 0", PCI_SIZE_32, PCI_CB_MEMORY_LIMIT_0 }, | |
| { "CardBus memory base 1", PCI_SIZE_32, PCI_CB_MEMORY_BASE_1 }, | |
| { "CardBus memory limit 1", PCI_SIZE_32, PCI_CB_MEMORY_LIMIT_1 }, | |
| { "CardBus IO base 0", PCI_SIZE_16, PCI_CB_IO_BASE_0 }, | |
| { "CardBus IO base high 0", PCI_SIZE_16, PCI_CB_IO_BASE_0_HI }, | |
| { "CardBus IO limit 0", PCI_SIZE_16, PCI_CB_IO_LIMIT_0 }, | |
| { "CardBus IO limit high 0", PCI_SIZE_16, PCI_CB_IO_LIMIT_0_HI }, | |
| { "CardBus IO base 1", PCI_SIZE_16, PCI_CB_IO_BASE_1 }, | |
| { "CardBus IO base high 1", PCI_SIZE_16, PCI_CB_IO_BASE_1_HI }, | |
| { "CardBus IO limit 1", PCI_SIZE_16, PCI_CB_IO_LIMIT_1 }, | |
| { "CardBus IO limit high 1", PCI_SIZE_16, PCI_CB_IO_LIMIT_1_HI }, | |
| { "interrupt line", PCI_SIZE_8, PCI_INTERRUPT_LINE }, | |
| { "interrupt pin", PCI_SIZE_8, PCI_INTERRUPT_PIN }, | |
| { "bridge control", PCI_SIZE_16, PCI_CB_BRIDGE_CONTROL }, | |
| { "subvendor ID", PCI_SIZE_16, PCI_CB_SUBSYSTEM_VENDOR_ID }, | |
| { "subdevice ID", PCI_SIZE_16, PCI_CB_SUBSYSTEM_ID }, | |
| { "PC Card 16bit base address", PCI_SIZE_32, PCI_CB_LEGACY_MODE_BASE }, | |
| {}, | |
| }; | |
| /** | |
| * pci_header_show() - Show the header of the specified PCI device. | |
| * | |
| * @dev: Bus+Device+Function number | |
| */ | |
| static void pci_header_show(struct udevice *dev) | |
| { | |
| unsigned long class, header_type; | |
| dm_pci_read_config(dev, PCI_CLASS_CODE, &class, PCI_SIZE_8); | |
| dm_pci_read_config(dev, PCI_HEADER_TYPE, &header_type, PCI_SIZE_8); | |
| pci_show_regs(dev, regs_start); | |
| printf(" class code = 0x%.2x (%s)\n", (int)class, | |
| pci_class_str(class)); | |
| pci_show_regs(dev, regs_rest); | |
| switch (header_type & 0x7f) { | |
| case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */ | |
| pci_show_regs(dev, regs_normal); | |
| break; | |
| case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */ | |
| pci_show_regs(dev, regs_bridge); | |
| break; | |
| case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */ | |
| pci_show_regs(dev, regs_cardbus); | |
| break; | |
| default: | |
| printf("unknown header\n"); | |
| break; | |
| } | |
| } | |
| static void pciinfo_header(bool short_listing) | |
| { | |
| if (short_listing) { | |
| printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n"); | |
| printf("_____________________________________________________________\n"); | |
| } | |
| } | |
| /** | |
| * pci_header_show_brief() - Show the short-form PCI device header | |
| * | |
| * Reads and prints the header of the specified PCI device in short form. | |
| * | |
| * @dev: PCI device to show | |
| */ | |
| static void pci_header_show_brief(struct udevice *dev) | |
| { | |
| ulong vendor, device; | |
| ulong class, subclass; | |
| dm_pci_read_config(dev, PCI_VENDOR_ID, &vendor, PCI_SIZE_16); | |
| dm_pci_read_config(dev, PCI_DEVICE_ID, &device, PCI_SIZE_16); | |
| dm_pci_read_config(dev, PCI_CLASS_CODE, &class, PCI_SIZE_8); | |
| dm_pci_read_config(dev, PCI_CLASS_SUB_CODE, &subclass, PCI_SIZE_8); | |
| printf("0x%.4lx 0x%.4lx %-23s 0x%.2lx\n", | |
| vendor, device, | |
| pci_class_str(class), subclass); | |
| } | |
| static void pciinfo(struct udevice *bus, bool short_listing, bool multi) | |
| { | |
| struct udevice *dev; | |
| if (!multi) | |
| printf("Scanning PCI devices on bus %d\n", dev_seq(bus)); | |
| if (!multi || dev_seq(bus) == 0) | |
| pciinfo_header(short_listing); | |
| for (device_find_first_child(bus, &dev); | |
| dev; | |
| device_find_next_child(&dev)) { | |
| struct pci_child_plat *pplat; | |
| pplat = dev_get_parent_plat(dev); | |
| if (short_listing) { | |
| printf("%02x.%02x.%02x ", dev_seq(bus), | |
| PCI_DEV(pplat->devfn), PCI_FUNC(pplat->devfn)); | |
| pci_header_show_brief(dev); | |
| } else { | |
| printf("\nFound PCI device %02x.%02x.%02x:\n", | |
| dev_seq(bus), | |
| PCI_DEV(pplat->devfn), PCI_FUNC(pplat->devfn)); | |
| pci_header_show(dev); | |
| } | |
| } | |
| } | |
| /** | |
| * get_pci_dev() - Convert the "bus.device.function" identifier into a number | |
| * | |
| * @name: Device string in the form "bus.device.function" where each is in hex | |
| * Return: encoded pci_dev_t or -1 if the string was invalid | |
| */ | |
| static pci_dev_t get_pci_dev(char *name) | |
| { | |
| char cnum[12]; | |
| int len, i, iold, n; | |
| int bdfs[3] = {0,0,0}; | |
| len = strlen(name); | |
| if (len > 8) | |
| return -1; | |
| for (i = 0, iold = 0, n = 0; i < len; i++) { | |
| if (name[i] == '.') { | |
| memcpy(cnum, &name[iold], i - iold); | |
| cnum[i - iold] = '\0'; | |
| bdfs[n++] = hextoul(cnum, NULL); | |
| iold = i + 1; | |
| } | |
| } | |
| strcpy(cnum, &name[iold]); | |
| if (n == 0) | |
| n = 1; | |
| bdfs[n] = hextoul(cnum, NULL); | |
| return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]); | |
| } | |
| static int pci_cfg_display(struct udevice *dev, ulong addr, | |
| enum pci_size_t size, ulong length) | |
| { | |
| #define DISP_LINE_LEN 16 | |
| ulong i, nbytes, linebytes; | |
| int byte_size; | |
| int rc = 0; | |
| byte_size = pci_byte_size(size); | |
| if (length == 0) | |
| length = 0x40 / byte_size; /* Standard PCI config space */ | |
| if (addr >= 4096) | |
| return 1; | |
| /* Print the lines. | |
| * once, and all accesses are with the specified bus width. | |
| */ | |
| nbytes = length * byte_size; | |
| do { | |
| printf("%08lx:", addr); | |
| linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; | |
| for (i = 0; i < linebytes; i += byte_size) { | |
| unsigned long val; | |
| dm_pci_read_config(dev, addr, &val, size); | |
| printf(" %0*lx", pci_field_width(size), val); | |
| addr += byte_size; | |
| } | |
| printf("\n"); | |
| nbytes -= linebytes; | |
| if (ctrlc()) { | |
| rc = 1; | |
| break; | |
| } | |
| } while (nbytes > 0 && addr < 4096); | |
| if (rc == 0 && nbytes > 0) | |
| return 1; | |
| return (rc); | |
| } | |
| static int pci_cfg_modify(struct udevice *dev, ulong addr, ulong size, | |
| ulong value, int incrflag) | |
| { | |
| ulong i; | |
| int nbytes; | |
| ulong val; | |
| if (addr >= 4096) | |
| return 1; | |
| /* Print the address, followed by value. Then accept input for | |
| * the next value. A non-converted value exits. | |
| */ | |
| do { | |
| printf("%08lx:", addr); | |
| dm_pci_read_config(dev, addr, &val, size); | |
| printf(" %0*lx", pci_field_width(size), val); | |
| nbytes = cli_readline(" ? "); | |
| if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { | |
| /* <CR> pressed as only input, don't modify current | |
| * location and move to next. "-" pressed will go back. | |
| */ | |
| if (incrflag) | |
| addr += nbytes ? -size : size; | |
| nbytes = 1; | |
| /* good enough to not time out */ | |
| bootretry_reset_cmd_timeout(); | |
| } | |
| #ifdef CONFIG_BOOT_RETRY_TIME | |
| else if (nbytes == -2) { | |
| break; /* timed out, exit the command */ | |
| } | |
| #endif | |
| else { | |
| char *endp; | |
| i = hextoul(console_buffer, &endp); | |
| nbytes = endp - console_buffer; | |
| if (nbytes) { | |
| /* good enough to not time out | |
| */ | |
| bootretry_reset_cmd_timeout(); | |
| dm_pci_write_config(dev, addr, i, size); | |
| if (incrflag) | |
| addr += size; | |
| } | |
| } | |
| } while (nbytes && addr < 4096); | |
| if (nbytes) | |
| return 1; | |
| return 0; | |
| } | |
| static const struct pci_flag_info { | |
| uint flag; | |
| const char *name; | |
| } pci_flag_info[] = { | |
| { PCI_REGION_IO, "io" }, | |
| { PCI_REGION_PREFETCH, "prefetch" }, | |
| { PCI_REGION_SYS_MEMORY, "sysmem" }, | |
| { PCI_REGION_RO, "readonly" }, | |
| }; | |
| static void pci_show_regions(struct udevice *bus) | |
| { | |
| struct pci_controller *hose = dev_get_uclass_priv(pci_get_controller(bus)); | |
| const struct pci_region *reg; | |
| int i, j; | |
| if (!hose) { | |
| printf("Bus '%s' is not a PCI controller\n", bus->name); | |
| return; | |
| } | |
| printf("Buses %02x-%02x\n", hose->first_busno, hose->last_busno); | |
| printf("# %-18s %-18s %-18s %s\n", "Bus start", "Phys start", "Size", | |
| "Flags"); | |
| for (i = 0, reg = hose->regions; i < hose->region_count; i++, reg++) { | |
| printf("%d %#018llx %#018llx %#018llx ", i, | |
| (unsigned long long)reg->bus_start, | |
| (unsigned long long)reg->phys_start, | |
| (unsigned long long)reg->size); | |
| if (!(reg->flags & PCI_REGION_TYPE)) | |
| printf("mem "); | |
| for (j = 0; j < ARRAY_SIZE(pci_flag_info); j++) { | |
| if (reg->flags & pci_flag_info[j].flag) | |
| printf("%s ", pci_flag_info[j].name); | |
| } | |
| printf("\n"); | |
| } | |
| } | |
| /* PCI Configuration Space access commands | |
| * | |
| * Syntax: | |
| * pci display[.b, .w, .l] bus.device.function} [addr] [len] | |
| * pci next[.b, .w, .l] bus.device.function [addr] | |
| * pci modify[.b, .w, .l] bus.device.function [addr] | |
| * pci write[.b, .w, .l] bus.device.function addr value | |
| */ | |
| static int do_pci(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) | |
| { | |
| ulong addr = 0, value = 0, cmd_size = 0; | |
| enum pci_size_t size = PCI_SIZE_32; | |
| struct udevice *dev, *bus; | |
| int busnum = -1; | |
| pci_dev_t bdf = 0; | |
| char cmd = 's'; | |
| int ret = 0; | |
| char *endp; | |
| if (argc > 1) | |
| cmd = argv[1][0]; | |
| switch (cmd) { | |
| case 'd': /* display */ | |
| case 'n': /* next */ | |
| case 'm': /* modify */ | |
| case 'w': /* write */ | |
| /* Check for a size specification. */ | |
| cmd_size = cmd_get_data_size(argv[1], 4); | |
| size = (cmd_size == 4) ? PCI_SIZE_32 : cmd_size - 1; | |
| if (argc > 3) | |
| addr = hextoul(argv[3], NULL); | |
| if (argc > 4) | |
| value = hextoul(argv[4], NULL); | |
| case 'h': /* header */ | |
| case 'b': /* bars */ | |
| if (argc < 3) | |
| goto usage; | |
| if ((bdf = get_pci_dev(argv[2])) == -1) | |
| return 1; | |
| break; | |
| case 'e': | |
| pci_init(); | |
| return 0; | |
| case 'r': /* no break */ | |
| default: /* scan bus */ | |
| value = 1; /* short listing */ | |
| if (argc > 1) { | |
| if (cmd != 'r' && argv[argc-1][0] == 'l') { | |
| value = 0; | |
| argc--; | |
| } | |
| if (argc > 2 || (argc > 1 && cmd != 'r' && argv[1][0] != 's')) { | |
| if (argv[argc - 1][0] != '*') { | |
| busnum = hextoul(argv[argc - 1], &endp); | |
| if (*endp) | |
| goto usage; | |
| } | |
| argc--; | |
| } | |
| if (cmd == 'r' && argc > 2) | |
| goto usage; | |
| else if (cmd != 'r' && (argc > 2 || (argc == 2 && argv[1][0] != 's'))) | |
| goto usage; | |
| } | |
| if (busnum == -1) { | |
| if (cmd != 'r') { | |
| for (busnum = 0; | |
| uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus) == 0; | |
| busnum++) | |
| pciinfo(bus, value, true); | |
| } else { | |
| for (busnum = 0; | |
| uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus) == 0; | |
| busnum++) { | |
| /* Regions are controller specific so skip non-root buses */ | |
| if (device_is_on_pci_bus(bus)) | |
| continue; | |
| pci_show_regions(bus); | |
| } | |
| } | |
| return 0; | |
| } | |
| ret = uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus); | |
| if (ret) { | |
| printf("No such bus\n"); | |
| return CMD_RET_FAILURE; | |
| } | |
| if (cmd == 'r') | |
| pci_show_regions(bus); | |
| else | |
| pciinfo(bus, value, false); | |
| return 0; | |
| } | |
| ret = dm_pci_bus_find_bdf(bdf, &dev); | |
| if (ret) { | |
| printf("No such device\n"); | |
| return CMD_RET_FAILURE; | |
| } | |
| switch (argv[1][0]) { | |
| case 'h': /* header */ | |
| pci_header_show(dev); | |
| break; | |
| case 'd': /* display */ | |
| return pci_cfg_display(dev, addr, size, value); | |
| case 'n': /* next */ | |
| if (argc < 4) | |
| goto usage; | |
| ret = pci_cfg_modify(dev, addr, size, value, 0); | |
| break; | |
| case 'm': /* modify */ | |
| if (argc < 4) | |
| goto usage; | |
| ret = pci_cfg_modify(dev, addr, size, value, 1); | |
| break; | |
| case 'w': /* write */ | |
| if (argc < 5) | |
| goto usage; | |
| ret = dm_pci_write_config(dev, addr, value, size); | |
| break; | |
| case 'b': /* bars */ | |
| return pci_bar_show(dev); | |
| default: | |
| ret = CMD_RET_USAGE; | |
| break; | |
| } | |
| return ret; | |
| usage: | |
| return CMD_RET_USAGE; | |
| } | |
| /***************************************************/ | |
| #ifdef CONFIG_SYS_LONGHELP | |
| static char pci_help_text[] = | |
| "[bus|*] [long]\n" | |
| " - short or long list of PCI devices on bus 'bus'\n" | |
| "pci enum\n" | |
| " - Enumerate PCI buses\n" | |
| "pci header b.d.f\n" | |
| " - show header of PCI device 'bus.device.function'\n" | |
| "pci bar b.d.f\n" | |
| " - show BARs base and size for device b.d.f'\n" | |
| "pci regions [bus|*]\n" | |
| " - show PCI regions\n" | |
| "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n" | |
| " - display PCI configuration space (CFG)\n" | |
| "pci next[.b, .w, .l] b.d.f address\n" | |
| " - modify, read and keep CFG address\n" | |
| "pci modify[.b, .w, .l] b.d.f address\n" | |
| " - modify, auto increment CFG address\n" | |
| "pci write[.b, .w, .l] b.d.f address value\n" | |
| " - write to CFG address"; | |
| #endif | |
| U_BOOT_CMD( | |
| pci, 5, 1, do_pci, | |
| "list and access PCI Configuration Space", pci_help_text | |
| ); |