test/py/tests/test_mmc_rd.py

# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.

# Test U-Boot's "mmc read" command. The test reads data from the eMMC or SD
# card, and validates the no errors occurred, and that the expected data was
# read if the test configuration contains a CRC of the expected data.

import pytest
import time
import u_boot_utils

"""
This test relies on boardenv_* to containing configuration values to define
which MMC devices should be tested. For example:

# Configuration data for test_mmc_dev, test_mmc_rescan, test_mmc_info; defines
# whole MMC devices that mmc dev/rescan/info commands may operate upon.
env__mmc_dev_configs = (
    {
        'fixture_id': 'emmc-boot0',
        'is_emmc': True,
        'devid': 0,
        'partid': 1,
        'info_device': ???,
        'info_speed': ???,
        'info_mode': ???,
        'info_buswidth': ???.
    },
    {
        'fixture_id': 'emmc-boot1',
        'is_emmc': True,
        'devid': 0,
        'partid': 2,
        'info_device': ???,
        'info_speed': ???,
        'info_mode': ???,
        'info_buswidth': ???.
    },
    {
        'fixture_id': 'emmc-data',
        'is_emmc': True,
        'devid': 0,
        'partid': 0,
        'info_device': ???,
        'info_speed': ???,
        'info_mode': ???,
        'info_buswidth': ???.
    },
    {
        'fixture_id': 'sd',
        'is_emmc': False,
        'devid': 1,
        'partid': None,
        'info_device': ???,
        'info_speed': ???,
        'info_mode': ???,
        'info_buswidth': ???.
    },
)

# Configuration data for test_mmc_rd; defines regions of the MMC (entire
# devices, or ranges of sectors) which can be read:
env__mmc_rd_configs = (
    {
        'fixture_id': 'emmc-boot0',
        'is_emmc': True,
        'devid': 0,
        'partid': 1,
        'sector': 0x10,
        'count': 1,
    },
    {
        'fixture_id': 'emmc-boot1',
        'is_emmc': True,
        'devid': 0,
        'partid': 2,
        'sector': 0x10,
        'count': 1,
    },
    {
        'fixture_id': 'emmc-data',
        'is_emmc': True,
        'devid': 0,
        'partid': 0,
        'sector': 0x10,
        'count': 0x1000,
    },
    {
        'fixture_id': 'sd-mbr',
        'is_emmc': False,
        'devid': 1,
        'partid': None,
        'sector': 0,
        'count': 1,
        'crc32': '8f6ecf0d',
    },
    {
        'fixture_id': 'sd-large',
        'is_emmc': False,
        'devid': 1,
        'partid': None,
        'sector': 0x10,
        'count': 0x1000,
    },
)
"""

def mmc_dev(u_boot_console, is_emmc, devid, partid):
    """Run the "mmc dev" command.

    Args:
        u_boot_console: A U-Boot console connection.
        is_emmc: Whether the device is eMMC
        devid: Device ID
        partid: Partition ID

    Returns:
        Nothing.
    """

    # Select MMC device
    cmd = 'mmc dev %d' % devid
    if is_emmc:
        cmd += ' %d' % partid
    response = u_boot_console.run_command(cmd)
    assert 'no card present' not in response
    if is_emmc:
        partid_response = '(part %d)' % partid
    else:
        partid_response = ''
    good_response = 'mmc%d%s is current device' % (devid, partid_response)
    assert good_response in response

@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_dev(u_boot_console, env__mmc_dev_config):
    """Test the "mmc dev" command.

    Args:
        u_boot_console: A U-Boot console connection.
        env__mmc_dev_config: The single MMC configuration on which
            to run the test. See the file-level comment above for details
            of the format.

    Returns:
        Nothing.
    """

    is_emmc = env__mmc_dev_config['is_emmc']
    devid = env__mmc_dev_config['devid']
    partid = env__mmc_dev_config.get('partid', 0)

    # Select MMC device
    mmc_dev(u_boot_console, is_emmc, devid, partid)

@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_rescan(u_boot_console, env__mmc_dev_config):
    """Test the "mmc rescan" command.

    Args:
        u_boot_console: A U-Boot console connection.
        env__mmc_dev_config: The single MMC configuration on which
            to run the test. See the file-level comment above for details
            of the format.

    Returns:
        Nothing.
    """

    is_emmc = env__mmc_dev_config['is_emmc']
    devid = env__mmc_dev_config['devid']
    partid = env__mmc_dev_config.get('partid', 0)

    # Select MMC device
    mmc_dev(u_boot_console, is_emmc, devid, partid)

    # Rescan MMC device
    cmd = 'mmc rescan'
    response = u_boot_console.run_command(cmd)
    assert 'no card present' not in response

@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_info(u_boot_console, env__mmc_dev_config):
    """Test the "mmc info" command.

    Args:
        u_boot_console: A U-Boot console connection.
        env__mmc_dev_config: The single MMC configuration on which
            to run the test. See the file-level comment above for details
            of the format.

    Returns:
        Nothing.
    """

    is_emmc = env__mmc_dev_config['is_emmc']
    devid = env__mmc_dev_config['devid']
    partid = env__mmc_dev_config.get('partid', 0)
    info_device = env__mmc_dev_config['info_device']
    info_speed = env__mmc_dev_config['info_speed']
    info_mode = env__mmc_dev_config['info_mode']
    info_buswidth = env__mmc_dev_config['info_buswidth']

    # Select MMC device
    mmc_dev(u_boot_console, is_emmc, devid, partid)

    # Read MMC device information
    cmd = 'mmc info'
    response = u_boot_console.run_command(cmd)
    good_response = "Device: %s" % info_device
    assert good_response in response
    good_response = "Bus Speed: %s" % info_speed
    assert good_response in response
    good_response = "Mode: %s" % info_mode
    assert good_response in response
    good_response = "Bus Width: %s" % info_buswidth
    assert good_response in response

@pytest.mark.buildconfigspec('cmd_mmc')
def test_mmc_rd(u_boot_console, env__mmc_rd_config):
    """Test the "mmc read" command.

    Args:
        u_boot_console: A U-Boot console connection.
        env__mmc_rd_config: The single MMC configuration on which
            to run the test. See the file-level comment above for details
            of the format.

    Returns:
        Nothing.
    """

    is_emmc = env__mmc_rd_config['is_emmc']
    devid = env__mmc_rd_config['devid']
    partid = env__mmc_rd_config.get('partid', 0)
    sector = env__mmc_rd_config.get('sector', 0)
    count_sectors = env__mmc_rd_config.get('count', 1)
    expected_crc32 = env__mmc_rd_config.get('crc32', None)
    read_duration_max = env__mmc_rd_config.get('read_duration_max', 0)

    count_bytes = count_sectors * 512
    bcfg = u_boot_console.config.buildconfig
    has_cmd_memory = bcfg.get('config_cmd_memory', 'n') == 'y'
    has_cmd_crc32 = bcfg.get('config_cmd_crc32', 'n') == 'y'
    ram_base = u_boot_utils.find_ram_base(u_boot_console)
    addr = '0x%08x' % ram_base

    # Select MMC device
    mmc_dev(u_boot_console, is_emmc, devid, partid)

    # Clear target RAM
    if expected_crc32:
        if has_cmd_memory and has_cmd_crc32:
            cmd = 'mw.b %s 0 0x%x' % (addr, count_bytes)
            u_boot_console.run_command(cmd)

            cmd = 'crc32 %s 0x%x' % (addr, count_bytes)
            response = u_boot_console.run_command(cmd)
            assert expected_crc32 not in response
        else:
            u_boot_console.log.warning(
                'CONFIG_CMD_MEMORY or CONFIG_CMD_CRC32 != y: Skipping RAM clear')

    # Read data
    cmd = 'mmc read %s %x %x' % (addr, sector, count_sectors)
    tstart = time.time()
    response = u_boot_console.run_command(cmd)
    tend = time.time()
    good_response = 'MMC read: dev # %d, block # %d, count %d ... %d blocks read: OK' % (
        devid, sector, count_sectors, count_sectors)
    assert good_response in response

    # Check target RAM
    if expected_crc32:
        if has_cmd_crc32:
            cmd = 'crc32 %s 0x%x' % (addr, count_bytes)
            response = u_boot_console.run_command(cmd)
            assert expected_crc32 in response
        else:
            u_boot_console.log.warning('CONFIG_CMD_CRC32 != y: Skipping check')

    # Check if the command did not take too long
    if read_duration_max:
        elapsed = tend - tstart
        u_boot_console.log.info('Reading %d bytes took %f seconds' %
                                (count_bytes, elapsed))
        assert elapsed <= (read_duration_max - 0.01)