| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause | |
| /* | |
| * Copyright (C) 2016 | |
| * Ladislav Michl <ladis@linux-mips.org> | |
| */ | |
| #include <config.h> | |
| #include <image.h> | |
| #include <nand.h> | |
| #include <onenand_uboot.h> | |
| #include <ubispl.h> | |
| #include <spl.h> | |
| #if IS_ENABLED(CONFIG_SPL_OS_BOOT) | |
| int spl_ubi_load_image_os(struct spl_image_info *spl_image, | |
| struct spl_boot_device *bootdev, | |
| struct ubispl_info *info) | |
| { | |
| struct legacy_img_hdr *header; | |
| struct ubispl_load volumes[2]; | |
| int err; | |
| volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_KERNEL_ID; | |
| volumes[0].load_addr = (void *)CONFIG_SYS_LOAD_ADDR; | |
| #if IS_ENABLED(CONFIG_SPL_OS_BOOT_ARGS) | |
| volumes[1].vol_id = CONFIG_SPL_UBI_LOAD_ARGS_ID; | |
| volumes[1].load_addr = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; | |
| err = ubispl_load_volumes(info, volumes, 2); | |
| #else | |
| err = ubispl_load_volumes(info, volumes, 1); | |
| #endif | |
| if (err) | |
| return err; | |
| header = (struct legacy_img_hdr *)volumes[0].load_addr; | |
| spl_parse_image_header(spl_image, bootdev, header); | |
| puts("Linux loaded.\n"); | |
| return 0; | |
| } | |
| #endif | |
| int spl_ubi_load_image(struct spl_image_info *spl_image, | |
| struct spl_boot_device *bootdev) | |
| { | |
| struct legacy_img_hdr *header; | |
| struct ubispl_info info; | |
| struct ubispl_load volumes[2]; | |
| int ret = 1; | |
| switch (bootdev->boot_device) { | |
| #ifdef CONFIG_SPL_NAND_SUPPORT | |
| case BOOT_DEVICE_NAND: | |
| nand_init(); | |
| info.read = nand_spl_read_block; | |
| info.peb_size = CONFIG_SYS_NAND_BLOCK_SIZE; | |
| break; | |
| #endif | |
| #ifdef CONFIG_SPL_ONENAND_SUPPORT | |
| case BOOT_DEVICE_ONENAND: | |
| info.read = onenand_spl_read_block; | |
| info.peb_size = CFG_SYS_ONENAND_BLOCK_SIZE; | |
| break; | |
| #endif | |
| default: | |
| goto out; | |
| } | |
| info.ubi = (struct ubi_scan_info *)CONFIG_SPL_UBI_INFO_ADDR; | |
| info.fastmap = IS_ENABLED(CONFIG_MTD_UBI_FASTMAP); | |
| info.peb_offset = CONFIG_SPL_UBI_PEB_OFFSET; | |
| info.vid_offset = CONFIG_SPL_UBI_VID_OFFSET; | |
| info.leb_start = CONFIG_SPL_UBI_LEB_START; | |
| info.peb_count = CONFIG_SPL_UBI_MAX_PEBS - info.peb_offset; | |
| #if CONFIG_IS_ENABLED(OS_BOOT) | |
| if (!spl_start_uboot()) { | |
| ret = spl_ubi_load_image_os(spl_image, bootdev, &info); | |
| if (!ret) | |
| return 0; | |
| printf("%s: Failed in falcon boot: %d", __func__, ret); | |
| if (IS_ENABLED(CONFIG_SPL_OS_BOOT_SECURE)) | |
| return ret; | |
| printf("Fallback to U-Boot\n"); | |
| } | |
| #endif | |
| header = spl_get_load_buffer(-sizeof(*header), sizeof(header)); | |
| #ifdef CONFIG_SPL_UBI_LOAD_BY_VOLNAME | |
| volumes[0].vol_id = -1; | |
| strncpy(volumes[0].name, | |
| CONFIG_SPL_UBI_LOAD_MONITOR_VOLNAME, | |
| UBI_VOL_NAME_MAX + 1); | |
| #else | |
| volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_MONITOR_ID; | |
| #endif | |
| volumes[0].load_addr = (void *)header; | |
| ret = ubispl_load_volumes(&info, volumes, 1); | |
| if (!ret) | |
| spl_parse_image_header(spl_image, bootdev, header); | |
| out: | |
| #ifdef CONFIG_SPL_NAND_SUPPORT | |
| if (bootdev->boot_device == BOOT_DEVICE_NAND) | |
| nand_deselect(); | |
| #endif | |
| return ret; | |
| } | |
| /* Use priorty 0 so that Ubi will override NAND and ONENAND methods */ | |
| SPL_LOAD_IMAGE_METHOD("NAND", 0, BOOT_DEVICE_NAND, spl_ubi_load_image); | |
| SPL_LOAD_IMAGE_METHOD("OneNAND", 0, BOOT_DEVICE_ONENAND, spl_ubi_load_image); |