| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Texas Instruments System Control Interface Protocol Driver | |
| * Based on drivers/firmware/ti_sci.c from Linux. | |
| * | |
| * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ | |
| * Lokesh Vutla <lokeshvutla@ti.com> | |
| */ | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <log.h> | |
| #include <mailbox.h> | |
| #include <malloc.h> | |
| #include <dm/device.h> | |
| #include <dm/device_compat.h> | |
| #include <dm/devres.h> | |
| #include <dm/lists.h> | |
| #include <linux/bitops.h> | |
| #include <linux/compat.h> | |
| #include <linux/err.h> | |
| #include <linux/soc/ti/k3-sec-proxy.h> | |
| #include <linux/soc/ti/ti_sci_protocol.h> | |
| #include "ti_sci.h" | |
| #include "ti_sci_static_data.h" | |
| /* List of all TI SCI devices active in system */ | |
| static LIST_HEAD(ti_sci_list); | |
| /** | |
| * struct ti_sci_xfer - Structure representing a message flow | |
| * @tx_message: Transmit message | |
| * @rx_len: Receive message length | |
| */ | |
| struct ti_sci_xfer { | |
| struct k3_sec_proxy_msg tx_message; | |
| u8 rx_len; | |
| }; | |
| /** | |
| * struct ti_sci_rm_type_map - Structure representing TISCI Resource | |
| * management representation of dev_ids. | |
| * @dev_id: TISCI device ID | |
| * @type: Corresponding id as identified by TISCI RM. | |
| * | |
| * Note: This is used only as a work around for using RM range apis | |
| * for AM654 SoC. For future SoCs dev_id will be used as type | |
| * for RM range APIs. In order to maintain ABI backward compatibility | |
| * type is not being changed for AM654 SoC. | |
| */ | |
| struct ti_sci_rm_type_map { | |
| u32 dev_id; | |
| u16 type; | |
| }; | |
| /** | |
| * struct ti_sci_desc - Description of SoC integration | |
| * @default_host_id: Host identifier representing the compute entity | |
| * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) | |
| * @max_msgs: Maximum number of messages that can be pending | |
| * simultaneously in the system | |
| * @max_msg_size: Maximum size of data per message that can be handled. | |
| */ | |
| struct ti_sci_desc { | |
| u8 default_host_id; | |
| int max_rx_timeout_ms; | |
| int max_msgs; | |
| int max_msg_size; | |
| }; | |
| /** | |
| * struct ti_sci_info - Structure representing a TI SCI instance | |
| * @dev: Device pointer | |
| * @desc: SoC description for this instance | |
| * @handle: Instance of TI SCI handle to send to clients. | |
| * @chan_tx: Transmit mailbox channel | |
| * @chan_rx: Receive mailbox channel | |
| * @xfer: xfer info | |
| * @list: list head | |
| * @is_secure: Determines if the communication is through secure threads. | |
| * @host_id: Host identifier representing the compute entity | |
| * @seq: Seq id used for verification for tx and rx message. | |
| */ | |
| struct ti_sci_info { | |
| struct udevice *dev; | |
| const struct ti_sci_desc *desc; | |
| struct ti_sci_handle handle; | |
| struct mbox_chan chan_tx; | |
| struct mbox_chan chan_rx; | |
| struct mbox_chan chan_notify; | |
| struct ti_sci_xfer xfer; | |
| struct list_head list; | |
| struct list_head dev_list; | |
| bool is_secure; | |
| u8 host_id; | |
| u8 seq; | |
| }; | |
| struct ti_sci_exclusive_dev { | |
| u32 id; | |
| u32 count; | |
| struct list_head list; | |
| }; | |
| #define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle) | |
| /** | |
| * ti_sci_setup_one_xfer() - Setup one message type | |
| * @info: Pointer to SCI entity information | |
| * @msg_type: Message type | |
| * @msg_flags: Flag to set for the message | |
| * @buf: Buffer to be send to mailbox channel | |
| * @tx_message_size: transmit message size | |
| * @rx_message_size: receive message size. may be set to zero for send-only | |
| * transactions. | |
| * | |
| * Helper function which is used by various command functions that are | |
| * exposed to clients of this driver for allocating a message traffic event. | |
| * | |
| * Return: Corresponding ti_sci_xfer pointer if all went fine, | |
| * else appropriate error pointer. | |
| */ | |
| static struct ti_sci_xfer *ti_sci_setup_one_xfer(struct ti_sci_info *info, | |
| u16 msg_type, u32 msg_flags, | |
| u32 *buf, | |
| size_t tx_message_size, | |
| size_t rx_message_size) | |
| { | |
| struct ti_sci_xfer *xfer = &info->xfer; | |
| struct ti_sci_msg_hdr *hdr; | |
| /* Ensure we have sane transfer sizes */ | |
| if (rx_message_size > info->desc->max_msg_size || | |
| tx_message_size > info->desc->max_msg_size || | |
| (rx_message_size > 0 && rx_message_size < sizeof(*hdr)) || | |
| tx_message_size < sizeof(*hdr)) { | |
| dev_err(info->dev, "TI-SCI message transfer size not sane\n"); | |
| return ERR_PTR(-ERANGE); | |
| } | |
| info->seq = ~info->seq; | |
| xfer->tx_message.buf = buf; | |
| xfer->tx_message.len = tx_message_size; | |
| xfer->rx_len = (u8)rx_message_size; | |
| hdr = (struct ti_sci_msg_hdr *)buf; | |
| hdr->seq = info->seq; | |
| hdr->type = msg_type; | |
| hdr->host = info->host_id; | |
| hdr->flags = msg_flags; | |
| return xfer; | |
| } | |
| /** | |
| * ti_sci_get_response() - Receive response from mailbox channel | |
| * @info: Pointer to SCI entity information | |
| * @xfer: Transfer to initiate and wait for response | |
| * @chan: Channel to receive the response | |
| * | |
| * Return: -ETIMEDOUT in case of no response, if transmit error, | |
| * return corresponding error, else if all goes well, | |
| * return 0. | |
| */ | |
| static int ti_sci_get_response(struct ti_sci_info *info, | |
| struct ti_sci_xfer *xfer, | |
| struct mbox_chan *chan) | |
| { | |
| struct k3_sec_proxy_msg *msg = &xfer->tx_message; | |
| struct ti_sci_secure_msg_hdr *secure_hdr; | |
| struct ti_sci_msg_hdr *hdr; | |
| int ret; | |
| /* Receive the response */ | |
| ret = mbox_recv(chan, msg, info->desc->max_rx_timeout_ms * 1000); | |
| if (ret) { | |
| dev_err(info->dev, "%s: Message receive failed. ret = %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| /* ToDo: Verify checksum */ | |
| if (info->is_secure) { | |
| secure_hdr = (struct ti_sci_secure_msg_hdr *)msg->buf; | |
| msg->buf = (u32 *)((void *)msg->buf + sizeof(*secure_hdr)); | |
| } | |
| /* msg is updated by mailbox driver */ | |
| hdr = (struct ti_sci_msg_hdr *)msg->buf; | |
| /* Sanity check for message response */ | |
| if (hdr->seq != info->seq) { | |
| dev_err(info->dev, "%s: Message for %d is not expected\n", | |
| __func__, hdr->seq); | |
| return -EINVAL; | |
| } | |
| if (msg->len > info->desc->max_msg_size) { | |
| dev_err(info->dev, "%s: Unable to handle %zu xfer (max %d)\n", | |
| __func__, msg->len, info->desc->max_msg_size); | |
| return -EINVAL; | |
| } | |
| if (msg->len < xfer->rx_len) { | |
| dev_err(info->dev, "%s: Recv xfer %zu < expected %d length\n", | |
| __func__, msg->len, xfer->rx_len); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_is_response_ack() - Generic ACK/NACK message checkup | |
| * @r: pointer to response buffer | |
| * | |
| * Return: true if the response was an ACK, else returns false. | |
| */ | |
| static bool ti_sci_is_response_ack(void *r) | |
| { | |
| struct ti_sci_msg_hdr *hdr = r; | |
| return hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK ? true : false; | |
| } | |
| /** | |
| * ti_sci_do_xfer() - Do one transfer | |
| * @info: Pointer to SCI entity information | |
| * @xfer: Transfer to initiate and wait for response | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_do_xfer(struct ti_sci_info *info, | |
| struct ti_sci_xfer *xfer) | |
| { | |
| struct k3_sec_proxy_msg *msg = &xfer->tx_message; | |
| u8 secure_buf[info->desc->max_msg_size]; | |
| struct ti_sci_secure_msg_hdr *secure_hdr = (struct ti_sci_secure_msg_hdr *)secure_buf; | |
| int ret; | |
| /* | |
| * The reason why we need the is_secure code is because of boot R5. | |
| * boot R5 starts off in "secure mode" when it hands off from Boot | |
| * ROM over to the Secondary bootloader. The initial set of calls | |
| * we have to make need to be on a secure pipe. | |
| */ | |
| if (info->is_secure) { | |
| /* ToDo: get checksum of the entire message */ | |
| secure_hdr->checksum = 0; | |
| secure_hdr->reserved = 0; | |
| memcpy(&secure_buf[sizeof(*secure_hdr)], xfer->tx_message.buf, | |
| xfer->tx_message.len); | |
| xfer->tx_message.buf = (u32 *)secure_buf; | |
| xfer->tx_message.len += sizeof(*secure_hdr); | |
| if (xfer->rx_len) | |
| xfer->rx_len += sizeof(*secure_hdr); | |
| } | |
| /* Send the message */ | |
| ret = mbox_send(&info->chan_tx, msg); | |
| if (ret) { | |
| dev_err(info->dev, "%s: Message sending failed. ret = %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| /* Get response if requested */ | |
| if (xfer->rx_len) { | |
| ret = ti_sci_get_response(info, xfer, &info->chan_rx); | |
| if (!ti_sci_is_response_ack(xfer->tx_message.buf)) { | |
| dev_err(info->dev, "Message not acknowledged\n"); | |
| ret = -ENODEV; | |
| } | |
| } | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_query_dm_cap() - Command to query DM firmware's capabilities | |
| * @handle: Pointer to TI SCI handle | |
| * @fw_caps: Pointer to firmware capabilities | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_query_dm_cap(struct ti_sci_handle *handle, u64 *fw_caps) | |
| { | |
| struct ti_sci_query_fw_caps_resp *cap_info; | |
| struct ti_sci_msg_hdr hdr; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_QUERY_FW_CAPS, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&hdr, sizeof(struct ti_sci_msg_hdr), | |
| sizeof(*cap_info)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| cap_info = (struct ti_sci_query_fw_caps_resp *)xfer->tx_message.buf; | |
| *fw_caps = cap_info->fw_caps; | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_get_dm_version() - command to get the DM version of the SCI | |
| * entity | |
| * @handle: Pointer to TI SCI handle | |
| * @dm_info: Pointer to DM version information structure | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_get_dm_version(struct ti_sci_handle *handle, | |
| struct ti_sci_dm_version_info *dm_info) | |
| { | |
| struct ti_sci_msg_dm_resp_version *ver_info; | |
| struct ti_sci_msg_hdr hdr; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle || !dm_info) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_DM_VERSION, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&hdr, sizeof(struct ti_sci_msg_hdr), | |
| sizeof(*ver_info)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| ver_info = (struct ti_sci_msg_dm_resp_version *)xfer->tx_message.buf; | |
| dm_info->abi_major = ver_info->abi_major; | |
| dm_info->abi_minor = ver_info->abi_minor; | |
| dm_info->dm_ver = ver_info->version; | |
| dm_info->patch_ver = ver_info->patch_version; | |
| dm_info->sub_ver = ver_info->sub_version; | |
| strlcpy(dm_info->sci_server_version, ver_info->sci_server_version, | |
| sizeof(ver_info->sci_server_version)); | |
| strlcpy(dm_info->rm_pm_hal_version, ver_info->rm_pm_hal_version, | |
| sizeof(ver_info->rm_pm_hal_version)); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_get_revision() - command to get the revision of the SCI entity | |
| * @handle: pointer to TI SCI handle | |
| * | |
| * Updates the SCI information in the internal data structure. | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_get_revision(struct ti_sci_handle *handle) | |
| { | |
| struct ti_sci_msg_resp_version *rev_info; | |
| struct ti_sci_version_info *ver; | |
| struct ti_sci_msg_hdr hdr; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_VERSION, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&hdr, sizeof(struct ti_sci_msg_hdr), | |
| sizeof(*rev_info)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| rev_info = (struct ti_sci_msg_resp_version *)xfer->tx_message.buf; | |
| ver = &handle->version; | |
| ver->abi_major = rev_info->abi_major; | |
| ver->abi_minor = rev_info->abi_minor; | |
| ver->firmware_revision = rev_info->firmware_revision; | |
| strncpy(ver->firmware_description, rev_info->firmware_description, | |
| sizeof(ver->firmware_description)); | |
| return 0; | |
| } | |
| /** | |
| * cmd_set_board_config_using_msg() - Common command to send board configuration | |
| * message | |
| * @handle: pointer to TI SCI handle | |
| * @msg_type: One of the TISCI message types to set board configuration | |
| * @addr: Address where the board config structure is located | |
| * @size: Size of the board config structure | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int cmd_set_board_config_using_msg(const struct ti_sci_handle *handle, | |
| u16 msg_type, u64 addr, u32 size) | |
| { | |
| struct ti_sci_msg_board_config req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, msg_type, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.boardcfgp_high = (addr >> 32) & 0xffffffff; | |
| req.boardcfgp_low = addr & 0xffffffff; | |
| req.boardcfg_size = size; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_set_board_config() - Command to send board configuration message | |
| * @handle: pointer to TI SCI handle | |
| * @addr: Address where the board config structure is located | |
| * @size: Size of the board config structure | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_set_board_config(const struct ti_sci_handle *handle, | |
| u64 addr, u32 size) | |
| { | |
| return cmd_set_board_config_using_msg(handle, | |
| TI_SCI_MSG_BOARD_CONFIG, | |
| addr, size); | |
| } | |
| /** | |
| * ti_sci_cmd_set_board_config_rm() - Command to send board resource | |
| * management configuration | |
| * @handle: pointer to TI SCI handle | |
| * @addr: Address where the board RM config structure is located | |
| * @size: Size of the RM config structure | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static | |
| int ti_sci_cmd_set_board_config_rm(const struct ti_sci_handle *handle, | |
| u64 addr, u32 size) | |
| { | |
| return cmd_set_board_config_using_msg(handle, | |
| TI_SCI_MSG_BOARD_CONFIG_RM, | |
| addr, size); | |
| } | |
| /** | |
| * ti_sci_cmd_set_board_config_security() - Command to send board security | |
| * configuration message | |
| * @handle: pointer to TI SCI handle | |
| * @addr: Address where the board security config structure is located | |
| * @size: Size of the security config structure | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static | |
| int ti_sci_cmd_set_board_config_security(const struct ti_sci_handle *handle, | |
| u64 addr, u32 size) | |
| { | |
| return cmd_set_board_config_using_msg(handle, | |
| TI_SCI_MSG_BOARD_CONFIG_SECURITY, | |
| addr, size); | |
| } | |
| /** | |
| * ti_sci_cmd_set_board_config_pm() - Command to send board power and clock | |
| * configuration message | |
| * @handle: pointer to TI SCI handle | |
| * @addr: Address where the board PM config structure is located | |
| * @size: Size of the PM config structure | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_set_board_config_pm(const struct ti_sci_handle *handle, | |
| u64 addr, u32 size) | |
| { | |
| return cmd_set_board_config_using_msg(handle, | |
| TI_SCI_MSG_BOARD_CONFIG_PM, | |
| addr, size); | |
| } | |
| static struct ti_sci_exclusive_dev | |
| *ti_sci_get_exclusive_dev(struct list_head *dev_list, u32 id) | |
| { | |
| struct ti_sci_exclusive_dev *dev; | |
| list_for_each_entry(dev, dev_list, list) | |
| if (dev->id == id) | |
| return dev; | |
| return NULL; | |
| } | |
| static void ti_sci_add_exclusive_dev(struct ti_sci_info *info, u32 id) | |
| { | |
| struct ti_sci_exclusive_dev *dev; | |
| dev = ti_sci_get_exclusive_dev(&info->dev_list, id); | |
| if (dev) { | |
| dev->count++; | |
| return; | |
| } | |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); | |
| dev->id = id; | |
| dev->count = 1; | |
| INIT_LIST_HEAD(&dev->list); | |
| list_add_tail(&dev->list, &info->dev_list); | |
| } | |
| static void ti_sci_delete_exclusive_dev(struct ti_sci_info *info, u32 id) | |
| { | |
| struct ti_sci_exclusive_dev *dev; | |
| dev = ti_sci_get_exclusive_dev(&info->dev_list, id); | |
| if (!dev) | |
| return; | |
| if (dev->count > 0) | |
| dev->count--; | |
| } | |
| /** | |
| * ti_sci_set_device_state() - Set device state helper | |
| * @handle: pointer to TI SCI handle | |
| * @id: Device identifier | |
| * @flags: flags to setup for the device | |
| * @state: State to move the device to | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_set_device_state(const struct ti_sci_handle *handle, | |
| u32 id, u32 flags, u8 state) | |
| { | |
| struct ti_sci_msg_req_set_device_state req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, | |
| flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.id = id; | |
| req.state = state; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| if (state == MSG_DEVICE_SW_STATE_AUTO_OFF) | |
| ti_sci_delete_exclusive_dev(info, id); | |
| else if (flags & MSG_FLAG_DEVICE_EXCLUSIVE) | |
| ti_sci_add_exclusive_dev(info, id); | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_set_device_state_no_wait() - Set device state helper without | |
| * requesting or waiting for a response. | |
| * @handle: pointer to TI SCI handle | |
| * @id: Device identifier | |
| * @flags: flags to setup for the device | |
| * @state: State to move the device to | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_set_device_state_no_wait(const struct ti_sci_handle *handle, | |
| u32 id, u32 flags, u8 state) | |
| { | |
| struct ti_sci_msg_req_set_device_state req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, | |
| flags | TI_SCI_FLAG_REQ_GENERIC_NORESPONSE, | |
| (u32 *)&req, sizeof(req), 0); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.id = id; | |
| req.state = state; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_get_device_state() - Get device state helper | |
| * @handle: Handle to the device | |
| * @id: Device Identifier | |
| * @clcnt: Pointer to Context Loss Count | |
| * @resets: pointer to resets | |
| * @p_state: pointer to p_state | |
| * @c_state: pointer to c_state | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_get_device_state(const struct ti_sci_handle *handle, | |
| u32 id, u32 *clcnt, u32 *resets, | |
| u8 *p_state, u8 *c_state) | |
| { | |
| struct ti_sci_msg_resp_get_device_state *resp; | |
| struct ti_sci_msg_req_get_device_state req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| if (!clcnt && !resets && !p_state && !c_state) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.id = id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_get_device_state *)xfer->tx_message.buf; | |
| if (clcnt) | |
| *clcnt = resp->context_loss_count; | |
| if (resets) | |
| *resets = resp->resets; | |
| if (p_state) | |
| *p_state = resp->programmed_state; | |
| if (c_state) | |
| *c_state = resp->current_state; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_get_device() - command to request for device managed by TISCI | |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle | |
| * @id: Device Identifier | |
| * | |
| * Request for the device - NOTE: the client MUST maintain integrity of | |
| * usage count by balancing get_device with put_device. No refcounting is | |
| * managed by driver for that purpose. | |
| * | |
| * NOTE: The request is for exclusive access for the processor. | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id) | |
| { | |
| return ti_sci_set_device_state(handle, id, 0, | |
| MSG_DEVICE_SW_STATE_ON); | |
| } | |
| static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle, | |
| u32 id) | |
| { | |
| return ti_sci_set_device_state(handle, id, MSG_FLAG_DEVICE_EXCLUSIVE, | |
| MSG_DEVICE_SW_STATE_ON); | |
| } | |
| /** | |
| * ti_sci_cmd_idle_device() - Command to idle a device managed by TISCI | |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle | |
| * @id: Device Identifier | |
| * | |
| * Request for the device - NOTE: the client MUST maintain integrity of | |
| * usage count by balancing get_device with put_device. No refcounting is | |
| * managed by driver for that purpose. | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id) | |
| { | |
| return ti_sci_set_device_state(handle, id, | |
| 0, | |
| MSG_DEVICE_SW_STATE_RETENTION); | |
| } | |
| static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle, | |
| u32 id) | |
| { | |
| return ti_sci_set_device_state(handle, id, MSG_FLAG_DEVICE_EXCLUSIVE, | |
| MSG_DEVICE_SW_STATE_RETENTION); | |
| } | |
| /** | |
| * ti_sci_cmd_put_device() - command to release a device managed by TISCI | |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle | |
| * @id: Device Identifier | |
| * | |
| * Request for the device - NOTE: the client MUST maintain integrity of | |
| * usage count by balancing get_device with put_device. No refcounting is | |
| * managed by driver for that purpose. | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id) | |
| { | |
| return ti_sci_set_device_state(handle, id, 0, | |
| MSG_DEVICE_SW_STATE_AUTO_OFF); | |
| } | |
| static int ti_sci_cmd_release_exclusive_devices(void) | |
| { | |
| struct ti_sci_exclusive_dev *dev, *tmp; | |
| struct ti_sci_info *info; | |
| int i, cnt; | |
| /* | |
| * Scan all ti_sci_list registrations, since with FIT images, we could | |
| * have started with one device tree registration and switched over | |
| * to a final version. This prevents exclusive devices identified | |
| * during the first probe to be left orphan. | |
| */ | |
| list_for_each_entry(info, &ti_sci_list, list) { | |
| list_for_each_entry_safe(dev, tmp, &info->dev_list, list) { | |
| cnt = dev->count; | |
| debug("%s: id = %d, cnt = %d\n", __func__, dev->id, cnt); | |
| for (i = 0; i < cnt; i++) | |
| ti_sci_cmd_put_device(&info->handle, dev->id); | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_dev_is_valid() - Is the device valid | |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle | |
| * @id: Device Identifier | |
| * | |
| * Return: 0 if all went fine and the device ID is valid, else return | |
| * appropriate error. | |
| */ | |
| static int ti_sci_cmd_dev_is_valid(const struct ti_sci_handle *handle, u32 id) | |
| { | |
| u8 unused; | |
| /* check the device state which will also tell us if the ID is valid */ | |
| return ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &unused); | |
| } | |
| /** | |
| * ti_sci_cmd_dev_get_clcnt() - Get context loss counter | |
| * @handle: Pointer to TISCI handle | |
| * @id: Device Identifier | |
| * @count: Pointer to Context Loss counter to populate | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_dev_get_clcnt(const struct ti_sci_handle *handle, u32 id, | |
| u32 *count) | |
| { | |
| return ti_sci_get_device_state(handle, id, count, NULL, NULL, NULL); | |
| } | |
| /** | |
| * ti_sci_cmd_dev_is_idle() - Check if the device is requested to be idle | |
| * @handle: Pointer to TISCI handle | |
| * @id: Device Identifier | |
| * @r_state: true if requested to be idle | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_dev_is_idle(const struct ti_sci_handle *handle, u32 id, | |
| bool *r_state) | |
| { | |
| int ret; | |
| u8 state; | |
| if (!r_state) | |
| return -EINVAL; | |
| ret = ti_sci_get_device_state(handle, id, NULL, NULL, &state, NULL); | |
| if (ret) | |
| return ret; | |
| *r_state = (state == MSG_DEVICE_SW_STATE_RETENTION); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_dev_is_stop() - Check if the device is requested to be stopped | |
| * @handle: Pointer to TISCI handle | |
| * @id: Device Identifier | |
| * @r_state: true if requested to be stopped | |
| * @curr_state: true if currently stopped. | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_dev_is_stop(const struct ti_sci_handle *handle, u32 id, | |
| bool *r_state, bool *curr_state) | |
| { | |
| int ret; | |
| u8 p_state, c_state; | |
| if (!r_state && !curr_state) | |
| return -EINVAL; | |
| ret = | |
| ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); | |
| if (ret) | |
| return ret; | |
| if (r_state) | |
| *r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF); | |
| if (curr_state) | |
| *curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_dev_is_on() - Check if the device is requested to be ON | |
| * @handle: Pointer to TISCI handle | |
| * @id: Device Identifier | |
| * @r_state: true if requested to be ON | |
| * @curr_state: true if currently ON and active | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_dev_is_on(const struct ti_sci_handle *handle, u32 id, | |
| bool *r_state, bool *curr_state) | |
| { | |
| int ret; | |
| u8 p_state, c_state; | |
| if (!r_state && !curr_state) | |
| return -EINVAL; | |
| ret = | |
| ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); | |
| if (ret) | |
| return ret; | |
| if (r_state) | |
| *r_state = (p_state == MSG_DEVICE_SW_STATE_ON); | |
| if (curr_state) | |
| *curr_state = (c_state == MSG_DEVICE_HW_STATE_ON); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_dev_is_trans() - Check if the device is currently transitioning | |
| * @handle: Pointer to TISCI handle | |
| * @id: Device Identifier | |
| * @curr_state: true if currently transitioning. | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_dev_is_trans(const struct ti_sci_handle *handle, u32 id, | |
| bool *curr_state) | |
| { | |
| int ret; | |
| u8 state; | |
| if (!curr_state) | |
| return -EINVAL; | |
| ret = ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &state); | |
| if (ret) | |
| return ret; | |
| *curr_state = (state == MSG_DEVICE_HW_STATE_TRANS); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_set_device_resets() - command to set resets for device managed | |
| * by TISCI | |
| * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle | |
| * @id: Device Identifier | |
| * @reset_state: Device specific reset bit field | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_set_device_resets(const struct ti_sci_handle *handle, | |
| u32 id, u32 reset_state) | |
| { | |
| struct ti_sci_msg_req_set_device_resets req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_RESETS, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.id = id; | |
| req.resets = reset_state; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_get_device_resets() - Get reset state for device managed | |
| * by TISCI | |
| * @handle: Pointer to TISCI handle | |
| * @id: Device Identifier | |
| * @reset_state: Pointer to reset state to populate | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle, | |
| u32 id, u32 *reset_state) | |
| { | |
| return ti_sci_get_device_state(handle, id, NULL, reset_state, NULL, | |
| NULL); | |
| } | |
| /** | |
| * ti_sci_set_clock_state() - Set clock state helper | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @flags: Header flags as needed | |
| * @state: State to request for the clock. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_set_clock_state(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, | |
| u32 flags, u8 state) | |
| { | |
| struct ti_sci_msg_req_set_clock_state req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE, | |
| flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| req.request_state = state; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_get_clock_state() - Get clock state helper | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @programmed_state: State requested for clock to move to | |
| * @current_state: State that the clock is currently in | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, | |
| u8 *programmed_state, u8 *current_state) | |
| { | |
| struct ti_sci_msg_resp_get_clock_state *resp; | |
| struct ti_sci_msg_req_get_clock_state req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| if (!programmed_state && !current_state) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->tx_message.buf; | |
| if (programmed_state) | |
| *programmed_state = resp->programmed_state; | |
| if (current_state) | |
| *current_state = resp->current_state; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false' | |
| * @can_change_freq: 'true' if frequency change is desired, else 'false' | |
| * @enable_input_term: 'true' if input termination is desired, else 'false' | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id, | |
| u8 clk_id, bool needs_ssc, bool can_change_freq, | |
| bool enable_input_term) | |
| { | |
| u32 flags = 0; | |
| flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0; | |
| flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0; | |
| flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0; | |
| return ti_sci_set_clock_state(handle, dev_id, clk_id, flags, | |
| MSG_CLOCK_SW_STATE_REQ); | |
| } | |
| /** | |
| * ti_sci_cmd_idle_clock() - Idle a clock which is in our control | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * | |
| * NOTE: This clock must have been requested by get_clock previously. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id) | |
| { | |
| return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, | |
| MSG_CLOCK_SW_STATE_UNREQ); | |
| } | |
| /** | |
| * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * | |
| * NOTE: This clock must have been requested by get_clock previously. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id) | |
| { | |
| return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, | |
| MSG_CLOCK_SW_STATE_AUTO); | |
| } | |
| /** | |
| * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @req_state: state indicating if the clock is auto managed | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, bool *req_state) | |
| { | |
| u8 state = 0; | |
| int ret; | |
| if (!req_state) | |
| return -EINVAL; | |
| ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL); | |
| if (ret) | |
| return ret; | |
| *req_state = (state == MSG_CLOCK_SW_STATE_AUTO); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_is_on() - Is the clock ON | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @req_state: state indicating if the clock is managed by us and enabled | |
| * @curr_state: state indicating if the clock is ready for operation | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id, | |
| u8 clk_id, bool *req_state, bool *curr_state) | |
| { | |
| u8 c_state = 0, r_state = 0; | |
| int ret; | |
| if (!req_state && !curr_state) | |
| return -EINVAL; | |
| ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, | |
| &r_state, &c_state); | |
| if (ret) | |
| return ret; | |
| if (req_state) | |
| *req_state = (r_state == MSG_CLOCK_SW_STATE_REQ); | |
| if (curr_state) | |
| *curr_state = (c_state == MSG_CLOCK_HW_STATE_READY); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_is_off() - Is the clock OFF | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @req_state: state indicating if the clock is managed by us and disabled | |
| * @curr_state: state indicating if the clock is NOT ready for operation | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id, | |
| u8 clk_id, bool *req_state, bool *curr_state) | |
| { | |
| u8 c_state = 0, r_state = 0; | |
| int ret; | |
| if (!req_state && !curr_state) | |
| return -EINVAL; | |
| ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, | |
| &r_state, &c_state); | |
| if (ret) | |
| return ret; | |
| if (req_state) | |
| *req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ); | |
| if (curr_state) | |
| *curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @parent_id: Parent clock identifier to set | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, u8 parent_id) | |
| { | |
| struct ti_sci_msg_req_set_clock_parent req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| req.parent_id = parent_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_get_parent() - Get current parent clock source | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @parent_id: Current clock parent | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, u8 *parent_id) | |
| { | |
| struct ti_sci_msg_resp_get_clock_parent *resp; | |
| struct ti_sci_msg_req_get_clock_parent req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle || !parent_id) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_get_clock_parent *)xfer->tx_message.buf; | |
| *parent_id = resp->parent_id; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @num_parents: Returns he number of parents to the current clock. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, | |
| u8 *num_parents) | |
| { | |
| struct ti_sci_msg_resp_get_clock_num_parents *resp; | |
| struct ti_sci_msg_req_get_clock_num_parents req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle || !num_parents) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_get_clock_num_parents *) | |
| xfer->tx_message.buf; | |
| *num_parents = resp->num_parents; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @min_freq: The minimum allowable frequency in Hz. This is the minimum | |
| * allowable programmed frequency and does not account for clock | |
| * tolerances and jitter. | |
| * @target_freq: The target clock frequency in Hz. A frequency will be | |
| * processed as close to this target frequency as possible. | |
| * @max_freq: The maximum allowable frequency in Hz. This is the maximum | |
| * allowable programmed frequency and does not account for clock | |
| * tolerances and jitter. | |
| * @match_freq: Frequency match in Hz response. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, u64 min_freq, | |
| u64 target_freq, u64 max_freq, | |
| u64 *match_freq) | |
| { | |
| struct ti_sci_msg_resp_query_clock_freq *resp; | |
| struct ti_sci_msg_req_query_clock_freq req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle || !match_freq) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| req.min_freq_hz = min_freq; | |
| req.target_freq_hz = target_freq; | |
| req.max_freq_hz = max_freq; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->tx_message.buf; | |
| *match_freq = resp->freq_hz; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_set_freq() - Set a frequency for clock | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @min_freq: The minimum allowable frequency in Hz. This is the minimum | |
| * allowable programmed frequency and does not account for clock | |
| * tolerances and jitter. | |
| * @target_freq: The target clock frequency in Hz. A frequency will be | |
| * processed as close to this target frequency as possible. | |
| * @max_freq: The maximum allowable frequency in Hz. This is the maximum | |
| * allowable programmed frequency and does not account for clock | |
| * tolerances and jitter. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, u64 min_freq, | |
| u64 target_freq, u64 max_freq) | |
| { | |
| struct ti_sci_msg_req_set_clock_freq req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| req.min_freq_hz = min_freq; | |
| req.target_freq_hz = target_freq; | |
| req.max_freq_hz = max_freq; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_clk_get_freq() - Get current frequency | |
| * @handle: pointer to TI SCI handle | |
| * @dev_id: Device identifier this request is for | |
| * @clk_id: Clock identifier for the device for this request. | |
| * Each device has it's own set of clock inputs. This indexes | |
| * which clock input to modify. | |
| * @freq: Currently frequency in Hz | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 clk_id, u64 *freq) | |
| { | |
| struct ti_sci_msg_resp_get_clock_freq *resp; | |
| struct ti_sci_msg_req_get_clock_freq req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle || !freq) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.dev_id = dev_id; | |
| req.clk_id = clk_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->tx_message.buf; | |
| *freq = resp->freq_hz; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_core_reboot() - Command to request system reset | |
| * @handle: pointer to TI SCI handle | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle) | |
| { | |
| struct ti_sci_msg_req_reboot req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SYS_RESET, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.domain = 0; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_get_resource_range - Helper to get a range of resources assigned | |
| * to a host. Resource is uniquely identified by | |
| * type and subtype. | |
| * @handle: Pointer to TISCI handle. | |
| * @dev_id: TISCI device ID. | |
| * @subtype: Resource assignment subtype that is being requested | |
| * from the given device. | |
| * @s_host: Host processor ID to which the resources are allocated | |
| * @range_start: Start index of the resource range | |
| * @range_num: Number of resources in the range | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_get_resource_range(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 subtype, u8 s_host, | |
| u16 *range_start, u16 *range_num) | |
| { | |
| struct ti_sci_msg_resp_get_resource_range *resp; | |
| struct ti_sci_msg_req_get_resource_range req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_RESOURCE_RANGE, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.secondary_host = s_host; | |
| req.type = dev_id & MSG_RM_RESOURCE_TYPE_MASK; | |
| req.subtype = subtype & MSG_RM_RESOURCE_SUBTYPE_MASK; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| resp = (struct ti_sci_msg_resp_get_resource_range *)xfer->tx_message.buf; | |
| if (!resp->range_start && !resp->range_num) { | |
| ret = -ENODEV; | |
| } else { | |
| *range_start = resp->range_start; | |
| *range_num = resp->range_num; | |
| }; | |
| fail: | |
| return ret; | |
| } | |
| static int __maybe_unused | |
| ti_sci_cmd_get_resource_range_static(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 subtype, | |
| u16 *range_start, u16 *range_num) | |
| { | |
| struct ti_sci_resource_static_data *data; | |
| int i = 0; | |
| while (1) { | |
| data = &rm_static_data[i]; | |
| if (!data->dev_id) | |
| return -EINVAL; | |
| if (data->dev_id != dev_id || data->subtype != subtype) { | |
| i++; | |
| continue; | |
| } | |
| *range_start = data->range_start; | |
| *range_num = data->range_num; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| /** | |
| * ti_sci_cmd_get_resource_range - Get a range of resources assigned to host | |
| * that is same as ti sci interface host. | |
| * @handle: Pointer to TISCI handle. | |
| * @dev_id: TISCI device ID. | |
| * @subtype: Resource assignment subtype that is being requested | |
| * from the given device. | |
| * @range_start: Start index of the resource range | |
| * @range_num: Number of resources in the range | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 subtype, | |
| u16 *range_start, u16 *range_num) | |
| { | |
| return ti_sci_get_resource_range(handle, dev_id, subtype, | |
| TI_SCI_IRQ_SECONDARY_HOST_INVALID, | |
| range_start, range_num); | |
| } | |
| /** | |
| * ti_sci_cmd_get_resource_range_from_shost - Get a range of resources | |
| * assigned to a specified host. | |
| * @handle: Pointer to TISCI handle. | |
| * @dev_id: TISCI device ID. | |
| * @subtype: Resource assignment subtype that is being requested | |
| * from the given device. | |
| * @s_host: Host processor ID to which the resources are allocated | |
| * @range_start: Start index of the resource range | |
| * @range_num: Number of resources in the range | |
| * | |
| * Return: 0 if all went fine, else return appropriate error. | |
| */ | |
| static | |
| int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle, | |
| u32 dev_id, u8 subtype, u8 s_host, | |
| u16 *range_start, u16 *range_num) | |
| { | |
| return ti_sci_get_resource_range(handle, dev_id, subtype, s_host, | |
| range_start, range_num); | |
| } | |
| /** | |
| * ti_sci_cmd_query_msmc() - Command to query currently available msmc memory | |
| * @handle: pointer to TI SCI handle | |
| * @msms_start: MSMC start as returned by tisci | |
| * @msmc_end: MSMC end as returned by tisci | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_query_msmc(const struct ti_sci_handle *handle, | |
| u64 *msmc_start, u64 *msmc_end) | |
| { | |
| struct ti_sci_msg_resp_query_msmc *resp; | |
| struct ti_sci_msg_hdr req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_QUERY_MSMC, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_query_msmc *)xfer->tx_message.buf; | |
| *msmc_start = ((u64)resp->msmc_start_high << TISCI_ADDR_HIGH_SHIFT) | | |
| resp->msmc_start_low; | |
| *msmc_end = ((u64)resp->msmc_end_high << TISCI_ADDR_HIGH_SHIFT) | | |
| resp->msmc_end_low; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_proc_request() - Command to request a physical processor control | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle, | |
| u8 proc_id) | |
| { | |
| struct ti_sci_msg_req_proc_request req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_REQUEST, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_proc_release() - Command to release a physical processor control | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle, | |
| u8 proc_id) | |
| { | |
| struct ti_sci_msg_req_proc_release req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_RELEASE, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_proc_handover() - Command to handover a physical processor | |
| * control to a host in the processor's access | |
| * control list. | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * @host_id: Host ID to get the control of the processor | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle, | |
| u8 proc_id, u8 host_id) | |
| { | |
| struct ti_sci_msg_req_proc_handover req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_HANDOVER, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| req.host_id = host_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_set_proc_boot_cfg() - Command to set the processor boot | |
| * configuration flags | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * @config_flags_set: Configuration flags to be set | |
| * @config_flags_clear: Configuration flags to be cleared. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_set_proc_boot_cfg(const struct ti_sci_handle *handle, | |
| u8 proc_id, u64 bootvector, | |
| u32 config_flags_set, | |
| u32 config_flags_clear) | |
| { | |
| struct ti_sci_msg_req_set_proc_boot_config req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CONFIG, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK; | |
| req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >> | |
| TISCI_ADDR_HIGH_SHIFT; | |
| req.config_flags_set = config_flags_set; | |
| req.config_flags_clear = config_flags_clear; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_set_proc_boot_ctrl() - Command to set the processor boot | |
| * control flags | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * @control_flags_set: Control flags to be set | |
| * @control_flags_clear: Control flags to be cleared | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_set_proc_boot_ctrl(const struct ti_sci_handle *handle, | |
| u8 proc_id, u32 control_flags_set, | |
| u32 control_flags_clear) | |
| { | |
| struct ti_sci_msg_req_set_proc_boot_ctrl req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CTRL, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| req.control_flags_set = control_flags_set; | |
| req.control_flags_clear = control_flags_clear; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_proc_auth_boot_image() - Command to authenticate and load the | |
| * image and then set the processor configuration flags. | |
| * @handle: Pointer to TI SCI handle | |
| * @image_addr: Memory address at which payload image and certificate is | |
| * located in memory, this is updated if the image data is | |
| * moved during authentication. | |
| * @image_size: This is updated with the final size of the image after | |
| * authentication. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_proc_auth_boot_image(const struct ti_sci_handle *handle, | |
| u64 *image_addr, u32 *image_size) | |
| { | |
| struct ti_sci_msg_req_proc_auth_boot_image req; | |
| struct ti_sci_msg_resp_proc_auth_boot_image *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_AUTH_BOOT_IMAGE, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.cert_addr_low = *image_addr & TISCI_ADDR_LOW_MASK; | |
| req.cert_addr_high = (*image_addr & TISCI_ADDR_HIGH_MASK) >> | |
| TISCI_ADDR_HIGH_SHIFT; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_proc_auth_boot_image *)xfer->tx_message.buf; | |
| *image_addr = (resp->image_addr_low & TISCI_ADDR_LOW_MASK) | | |
| (((u64)resp->image_addr_high << | |
| TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK); | |
| *image_size = resp->image_size; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_get_proc_boot_status() - Command to get the processor boot status | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle, | |
| u8 proc_id, u64 *bv, u32 *cfg_flags, | |
| u32 *ctrl_flags, u32 *sts_flags) | |
| { | |
| struct ti_sci_msg_resp_get_proc_boot_status *resp; | |
| struct ti_sci_msg_req_get_proc_boot_status req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_GET_PROC_BOOT_STATUS, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_resp_get_proc_boot_status *) | |
| xfer->tx_message.buf; | |
| *bv = (resp->bootvector_low & TISCI_ADDR_LOW_MASK) | | |
| (((u64)resp->bootvector_high << | |
| TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK); | |
| *cfg_flags = resp->config_flags; | |
| *ctrl_flags = resp->control_flags; | |
| *sts_flags = resp->status_flags; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_proc_wait_boot_status_no_wait() - Helper function to wait for a | |
| * processor boot status without requesting or | |
| * waiting for a response. | |
| * @proc_id: Processor ID this request is for | |
| * @num_wait_iterations: Total number of iterations we will check before | |
| * we will timeout and give up | |
| * @num_match_iterations: How many iterations should we have continued | |
| * status to account for status bits glitching. | |
| * This is to make sure that match occurs for | |
| * consecutive checks. This implies that the | |
| * worst case should consider that the stable | |
| * time should at the worst be num_wait_iterations | |
| * num_match_iterations to prevent timeout. | |
| * @delay_per_iteration_us: Specifies how long to wait (in micro seconds) | |
| * between each status checks. This is the minimum | |
| * duration, and overhead of register reads and | |
| * checks are on top of this and can vary based on | |
| * varied conditions. | |
| * @delay_before_iterations_us: Specifies how long to wait (in micro seconds) | |
| * before the very first check in the first | |
| * iteration of status check loop. This is the | |
| * minimum duration, and overhead of register | |
| * reads and checks are. | |
| * @status_flags_1_set_all_wait:If non-zero, Specifies that all bits of the | |
| * status matching this field requested MUST be 1. | |
| * @status_flags_1_set_any_wait:If non-zero, Specifies that at least one of the | |
| * bits matching this field requested MUST be 1. | |
| * @status_flags_1_clr_all_wait:If non-zero, Specifies that all bits of the | |
| * status matching this field requested MUST be 0. | |
| * @status_flags_1_clr_any_wait:If non-zero, Specifies that at least one of the | |
| * bits matching this field requested MUST be 0. | |
| * | |
| * Return: 0 if all goes well, else appropriate error message | |
| */ | |
| static int | |
| ti_sci_proc_wait_boot_status_no_wait(const struct ti_sci_handle *handle, | |
| u8 proc_id, | |
| u8 num_wait_iterations, | |
| u8 num_match_iterations, | |
| u8 delay_per_iteration_us, | |
| u8 delay_before_iterations_us, | |
| u32 status_flags_1_set_all_wait, | |
| u32 status_flags_1_set_any_wait, | |
| u32 status_flags_1_clr_all_wait, | |
| u32 status_flags_1_clr_any_wait) | |
| { | |
| struct ti_sci_msg_req_wait_proc_boot_status req; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_WAIT_PROC_BOOT_STATUS, | |
| TI_SCI_FLAG_REQ_GENERIC_NORESPONSE, | |
| (u32 *)&req, sizeof(req), 0); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.processor_id = proc_id; | |
| req.num_wait_iterations = num_wait_iterations; | |
| req.num_match_iterations = num_match_iterations; | |
| req.delay_per_iteration_us = delay_per_iteration_us; | |
| req.delay_before_iterations_us = delay_before_iterations_us; | |
| req.status_flags_1_set_all_wait = status_flags_1_set_all_wait; | |
| req.status_flags_1_set_any_wait = status_flags_1_set_any_wait; | |
| req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait; | |
| req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_proc_shutdown_no_wait() - Command to shutdown a core without | |
| * requesting or waiting for a response. Note that this API call | |
| * should be followed by placing the respective processor into | |
| * either WFE or WFI mode. | |
| * @handle: Pointer to TI SCI handle | |
| * @proc_id: Processor ID this request is for | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_proc_shutdown_no_wait(const struct ti_sci_handle *handle, | |
| u8 proc_id) | |
| { | |
| int ret; | |
| struct ti_sci_info *info; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| /* | |
| * Send the core boot status wait message waiting for either WFE or | |
| * WFI without requesting or waiting for a TISCI response with the | |
| * maximum wait time to give us the best chance to get to the WFE/WFI | |
| * command that should follow the invocation of this API before the | |
| * DMSC-internal processing of this command times out. Note that | |
| * waiting for the R5 WFE/WFI flags will also work on an ARMV8 type | |
| * core as the related flag bit positions are the same. | |
| */ | |
| ret = ti_sci_proc_wait_boot_status_no_wait(handle, proc_id, | |
| U8_MAX, 100, U8_MAX, U8_MAX, | |
| 0, PROC_BOOT_STATUS_FLAG_R5_WFE | PROC_BOOT_STATUS_FLAG_R5_WFI, | |
| 0, 0); | |
| if (ret) { | |
| dev_err(info->dev, "Sending core %u wait message fail %d\n", | |
| proc_id, ret); | |
| return ret; | |
| } | |
| /* | |
| * Release a processor managed by TISCI without requesting or waiting | |
| * for a response. | |
| */ | |
| ret = ti_sci_set_device_state_no_wait(handle, proc_id, 0, | |
| MSG_DEVICE_SW_STATE_AUTO_OFF); | |
| if (ret) | |
| dev_err(info->dev, "Sending core %u shutdown message fail %d\n", | |
| proc_id, ret); | |
| return ret; | |
| } | |
| /** | |
| * ti_sci_cmd_ring_config() - configure RA ring | |
| * @handle: pointer to TI SCI handle | |
| * @valid_params: Bitfield defining validity of ring configuration parameters. | |
| * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated | |
| * @index: Ring index. | |
| * @addr_lo: The ring base address lo 32 bits | |
| * @addr_hi: The ring base address hi 32 bits | |
| * @count: Number of ring elements. | |
| * @mode: The mode of the ring | |
| * @size: The ring element size. | |
| * @order_id: Specifies the ring's bus order ID. | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| * | |
| * See @ti_sci_msg_rm_ring_cfg_req for more info. | |
| */ | |
| static int ti_sci_cmd_ring_config(const struct ti_sci_handle *handle, | |
| u32 valid_params, u16 nav_id, u16 index, | |
| u32 addr_lo, u32 addr_hi, u32 count, | |
| u8 mode, u8 size, u8 order_id) | |
| { | |
| struct ti_sci_msg_rm_ring_cfg_resp *resp; | |
| struct ti_sci_msg_rm_ring_cfg_req req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_RING_CFG, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.valid_params = valid_params; | |
| req.nav_id = nav_id; | |
| req.index = index; | |
| req.addr_lo = addr_lo; | |
| req.addr_hi = addr_hi; | |
| req.count = count; | |
| req.mode = mode; | |
| req.size = size; | |
| req.order_id = order_id; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| fail: | |
| dev_dbg(info->dev, "RM_RA:config ring %u ret:%d\n", index, ret); | |
| return ret; | |
| } | |
| static int ti_sci_cmd_rm_psil_pair(const struct ti_sci_handle *handle, | |
| u32 nav_id, u32 src_thread, u32 dst_thread) | |
| { | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_msg_psil_pair req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_PSIL_PAIR, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.nav_id = nav_id; | |
| req.src_thread = src_thread; | |
| req.dst_thread = dst_thread; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| fail: | |
| dev_dbg(info->dev, "RM_PSIL: nav: %u link pair %u->%u ret:%u\n", | |
| nav_id, src_thread, dst_thread, ret); | |
| return ret; | |
| } | |
| static int ti_sci_cmd_rm_psil_unpair(const struct ti_sci_handle *handle, | |
| u32 nav_id, u32 src_thread, u32 dst_thread) | |
| { | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_msg_psil_unpair req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_RM_PSIL_UNPAIR, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.nav_id = nav_id; | |
| req.src_thread = src_thread; | |
| req.dst_thread = dst_thread; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| fail: | |
| dev_dbg(info->dev, "RM_PSIL: link unpair %u->%u ret:%u\n", | |
| src_thread, dst_thread, ret); | |
| return ret; | |
| } | |
| static int ti_sci_cmd_rm_udmap_tx_ch_cfg( | |
| const struct ti_sci_handle *handle, | |
| const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params) | |
| { | |
| struct ti_sci_msg_rm_udmap_tx_ch_cfg_resp *resp; | |
| struct ti_sci_msg_rm_udmap_tx_ch_cfg_req req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_TX_CH_CFG, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.valid_params = params->valid_params; | |
| req.nav_id = params->nav_id; | |
| req.index = params->index; | |
| req.tx_pause_on_err = params->tx_pause_on_err; | |
| req.tx_filt_einfo = params->tx_filt_einfo; | |
| req.tx_filt_pswords = params->tx_filt_pswords; | |
| req.tx_atype = params->tx_atype; | |
| req.tx_chan_type = params->tx_chan_type; | |
| req.tx_supr_tdpkt = params->tx_supr_tdpkt; | |
| req.tx_fetch_size = params->tx_fetch_size; | |
| req.tx_credit_count = params->tx_credit_count; | |
| req.txcq_qnum = params->txcq_qnum; | |
| req.tx_priority = params->tx_priority; | |
| req.tx_qos = params->tx_qos; | |
| req.tx_orderid = params->tx_orderid; | |
| req.fdepth = params->fdepth; | |
| req.tx_sched_priority = params->tx_sched_priority; | |
| req.tx_burst_size = params->tx_burst_size; | |
| req.tx_tdtype = params->tx_tdtype; | |
| req.extended_ch_type = params->extended_ch_type; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| fail: | |
| dev_dbg(info->dev, "TX_CH_CFG: chn %u ret:%u\n", params->index, ret); | |
| return ret; | |
| } | |
| static int ti_sci_cmd_rm_udmap_rx_ch_cfg( | |
| const struct ti_sci_handle *handle, | |
| const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params) | |
| { | |
| struct ti_sci_msg_rm_udmap_rx_ch_cfg_resp *resp; | |
| struct ti_sci_msg_rm_udmap_rx_ch_cfg_req req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_RX_CH_CFG, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.valid_params = params->valid_params; | |
| req.nav_id = params->nav_id; | |
| req.index = params->index; | |
| req.rx_fetch_size = params->rx_fetch_size; | |
| req.rxcq_qnum = params->rxcq_qnum; | |
| req.rx_priority = params->rx_priority; | |
| req.rx_qos = params->rx_qos; | |
| req.rx_orderid = params->rx_orderid; | |
| req.rx_sched_priority = params->rx_sched_priority; | |
| req.flowid_start = params->flowid_start; | |
| req.flowid_cnt = params->flowid_cnt; | |
| req.rx_pause_on_err = params->rx_pause_on_err; | |
| req.rx_atype = params->rx_atype; | |
| req.rx_chan_type = params->rx_chan_type; | |
| req.rx_ignore_short = params->rx_ignore_short; | |
| req.rx_ignore_long = params->rx_ignore_long; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| fail: | |
| dev_dbg(info->dev, "RX_CH_CFG: chn %u ret:%d\n", params->index, ret); | |
| return ret; | |
| } | |
| static int ti_sci_cmd_rm_udmap_rx_flow_cfg( | |
| const struct ti_sci_handle *handle, | |
| const struct ti_sci_msg_rm_udmap_flow_cfg *params) | |
| { | |
| struct ti_sci_msg_rm_udmap_flow_cfg_resp *resp; | |
| struct ti_sci_msg_rm_udmap_flow_cfg_req req; | |
| struct ti_sci_xfer *xfer; | |
| struct ti_sci_info *info; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_RM_UDMAP_FLOW_CFG, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.valid_params = params->valid_params; | |
| req.nav_id = params->nav_id; | |
| req.flow_index = params->flow_index; | |
| req.rx_einfo_present = params->rx_einfo_present; | |
| req.rx_psinfo_present = params->rx_psinfo_present; | |
| req.rx_error_handling = params->rx_error_handling; | |
| req.rx_desc_type = params->rx_desc_type; | |
| req.rx_sop_offset = params->rx_sop_offset; | |
| req.rx_dest_qnum = params->rx_dest_qnum; | |
| req.rx_src_tag_hi = params->rx_src_tag_hi; | |
| req.rx_src_tag_lo = params->rx_src_tag_lo; | |
| req.rx_dest_tag_hi = params->rx_dest_tag_hi; | |
| req.rx_dest_tag_lo = params->rx_dest_tag_lo; | |
| req.rx_src_tag_hi_sel = params->rx_src_tag_hi_sel; | |
| req.rx_src_tag_lo_sel = params->rx_src_tag_lo_sel; | |
| req.rx_dest_tag_hi_sel = params->rx_dest_tag_hi_sel; | |
| req.rx_dest_tag_lo_sel = params->rx_dest_tag_lo_sel; | |
| req.rx_fdq0_sz0_qnum = params->rx_fdq0_sz0_qnum; | |
| req.rx_fdq1_qnum = params->rx_fdq1_qnum; | |
| req.rx_fdq2_qnum = params->rx_fdq2_qnum; | |
| req.rx_fdq3_qnum = params->rx_fdq3_qnum; | |
| req.rx_ps_location = params->rx_ps_location; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| goto fail; | |
| fail: | |
| dev_dbg(info->dev, "RX_FL_CFG: %u ret:%d\n", params->flow_index, ret); | |
| return ret; | |
| } | |
| static int ti_sci_cmd_rm_udmap_rx_flow_cfg_noop(const struct ti_sci_handle *handle, | |
| const struct ti_sci_msg_rm_udmap_flow_cfg *params) | |
| { | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_set_fwl_region() - Request for configuring a firewall region | |
| * @handle: pointer to TI SCI handle | |
| * @region: region configuration parameters | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_set_fwl_region(const struct ti_sci_handle *handle, | |
| const struct ti_sci_msg_fwl_region *region) | |
| { | |
| struct ti_sci_msg_fwl_set_firewall_region_req req; | |
| struct ti_sci_msg_hdr *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_SET, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.fwl_id = region->fwl_id; | |
| req.region = region->region; | |
| req.n_permission_regs = region->n_permission_regs; | |
| req.control = region->control; | |
| req.permissions[0] = region->permissions[0]; | |
| req.permissions[1] = region->permissions[1]; | |
| req.permissions[2] = region->permissions[2]; | |
| req.start_address = region->start_address; | |
| req.end_address = region->end_address; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_get_fwl_region() - Request for getting a firewall region | |
| * @handle: pointer to TI SCI handle | |
| * @region: region configuration parameters | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_get_fwl_region(const struct ti_sci_handle *handle, | |
| struct ti_sci_msg_fwl_region *region) | |
| { | |
| struct ti_sci_msg_fwl_get_firewall_region_req req; | |
| struct ti_sci_msg_fwl_get_firewall_region_resp *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_GET, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.fwl_id = region->fwl_id; | |
| req.region = region->region; | |
| req.n_permission_regs = region->n_permission_regs; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_fwl_get_firewall_region_resp *)xfer->tx_message.buf; | |
| region->fwl_id = resp->fwl_id; | |
| region->region = resp->region; | |
| region->n_permission_regs = resp->n_permission_regs; | |
| region->control = resp->control; | |
| region->permissions[0] = resp->permissions[0]; | |
| region->permissions[1] = resp->permissions[1]; | |
| region->permissions[2] = resp->permissions[2]; | |
| region->start_address = resp->start_address; | |
| region->end_address = resp->end_address; | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_cmd_change_fwl_owner() - Request for changing a firewall owner | |
| * @handle: pointer to TI SCI handle | |
| * @region: region configuration parameters | |
| * | |
| * Return: 0 if all went well, else returns appropriate error value. | |
| */ | |
| static int ti_sci_cmd_change_fwl_owner(const struct ti_sci_handle *handle, | |
| struct ti_sci_msg_fwl_owner *owner) | |
| { | |
| struct ti_sci_msg_fwl_change_owner_info_req req; | |
| struct ti_sci_msg_fwl_change_owner_info_resp *resp; | |
| struct ti_sci_info *info; | |
| struct ti_sci_xfer *xfer; | |
| int ret = 0; | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| if (!handle) | |
| return -EINVAL; | |
| info = handle_to_ti_sci_info(handle); | |
| xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_FWL_CHANGE_OWNER, | |
| TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, | |
| (u32 *)&req, sizeof(req), sizeof(*resp)); | |
| if (IS_ERR(xfer)) { | |
| ret = PTR_ERR(xfer); | |
| return ret; | |
| } | |
| req.fwl_id = owner->fwl_id; | |
| req.region = owner->region; | |
| req.owner_index = owner->owner_index; | |
| ret = ti_sci_do_xfer(info, xfer); | |
| if (ret) | |
| return ret; | |
| resp = (struct ti_sci_msg_fwl_change_owner_info_resp *)xfer->tx_message.buf; | |
| owner->fwl_id = resp->fwl_id; | |
| owner->region = resp->region; | |
| owner->owner_index = resp->owner_index; | |
| owner->owner_privid = resp->owner_privid; | |
| owner->owner_permission_bits = resp->owner_permission_bits; | |
| return ret; | |
| } | |
| /* | |
| * ti_sci_setup_ops() - Setup the operations structures | |
| * @info: pointer to TISCI pointer | |
| */ | |
| static void ti_sci_setup_ops(struct ti_sci_info *info) | |
| { | |
| struct ti_sci_ops *ops = &info->handle.ops; | |
| struct ti_sci_board_ops *bops = &ops->board_ops; | |
| struct ti_sci_dev_ops *dops = &ops->dev_ops; | |
| struct ti_sci_clk_ops *cops = &ops->clk_ops; | |
| struct ti_sci_core_ops *core_ops = &ops->core_ops; | |
| struct ti_sci_firmware_ops *fw_ops = &ops->fw_ops; | |
| struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops; | |
| struct ti_sci_proc_ops *pops = &ops->proc_ops; | |
| struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops; | |
| struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops; | |
| struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops; | |
| struct ti_sci_fwl_ops *fwl_ops = &ops->fwl_ops; | |
| bops->board_config = ti_sci_cmd_set_board_config; | |
| bops->board_config_rm = ti_sci_cmd_set_board_config_rm; | |
| bops->board_config_security = ti_sci_cmd_set_board_config_security; | |
| bops->board_config_pm = ti_sci_cmd_set_board_config_pm; | |
| dops->get_device = ti_sci_cmd_get_device; | |
| dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive; | |
| dops->idle_device = ti_sci_cmd_idle_device; | |
| dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive; | |
| dops->put_device = ti_sci_cmd_put_device; | |
| dops->is_valid = ti_sci_cmd_dev_is_valid; | |
| dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt; | |
| dops->is_idle = ti_sci_cmd_dev_is_idle; | |
| dops->is_stop = ti_sci_cmd_dev_is_stop; | |
| dops->is_on = ti_sci_cmd_dev_is_on; | |
| dops->is_transitioning = ti_sci_cmd_dev_is_trans; | |
| dops->set_device_resets = ti_sci_cmd_set_device_resets; | |
| dops->get_device_resets = ti_sci_cmd_get_device_resets; | |
| dops->release_exclusive_devices = ti_sci_cmd_release_exclusive_devices; | |
| cops->get_clock = ti_sci_cmd_get_clock; | |
| cops->idle_clock = ti_sci_cmd_idle_clock; | |
| cops->put_clock = ti_sci_cmd_put_clock; | |
| cops->is_auto = ti_sci_cmd_clk_is_auto; | |
| cops->is_on = ti_sci_cmd_clk_is_on; | |
| cops->is_off = ti_sci_cmd_clk_is_off; | |
| cops->set_parent = ti_sci_cmd_clk_set_parent; | |
| cops->get_parent = ti_sci_cmd_clk_get_parent; | |
| cops->get_num_parents = ti_sci_cmd_clk_get_num_parents; | |
| cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq; | |
| cops->set_freq = ti_sci_cmd_clk_set_freq; | |
| cops->get_freq = ti_sci_cmd_clk_get_freq; | |
| core_ops->reboot_device = ti_sci_cmd_core_reboot; | |
| core_ops->query_msmc = ti_sci_cmd_query_msmc; | |
| rm_core_ops->get_range = ti_sci_cmd_get_resource_range; | |
| rm_core_ops->get_range_from_shost = | |
| ti_sci_cmd_get_resource_range_from_shost; | |
| pops->proc_request = ti_sci_cmd_proc_request; | |
| pops->proc_release = ti_sci_cmd_proc_release; | |
| pops->proc_handover = ti_sci_cmd_proc_handover; | |
| pops->set_proc_boot_cfg = ti_sci_cmd_set_proc_boot_cfg; | |
| pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl; | |
| pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image; | |
| pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status; | |
| pops->proc_shutdown_no_wait = ti_sci_cmd_proc_shutdown_no_wait; | |
| rops->config = ti_sci_cmd_ring_config; | |
| psilops->pair = ti_sci_cmd_rm_psil_pair; | |
| psilops->unpair = ti_sci_cmd_rm_psil_unpair; | |
| udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg; | |
| udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg; | |
| udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg; | |
| fwl_ops->set_fwl_region = ti_sci_cmd_set_fwl_region; | |
| fwl_ops->get_fwl_region = ti_sci_cmd_get_fwl_region; | |
| fwl_ops->change_fwl_owner = ti_sci_cmd_change_fwl_owner; | |
| fw_ops->get_dm_version = ti_sci_cmd_get_dm_version; | |
| fw_ops->query_dm_cap = ti_sci_cmd_query_dm_cap; | |
| } | |
| /** | |
| * ti_sci_get_handle_from_sysfw() - Get the TI SCI handle of the SYSFW | |
| * @dev: Pointer to the SYSFW device | |
| * | |
| * Return: pointer to handle if successful, else EINVAL if invalid conditions | |
| * are encountered. | |
| */ | |
| const | |
| struct ti_sci_handle *ti_sci_get_handle_from_sysfw(struct udevice *sci_dev) | |
| { | |
| int ret; | |
| if (!sci_dev) | |
| return ERR_PTR(-EINVAL); | |
| struct ti_sci_info *info = dev_get_priv(sci_dev); | |
| if (!info) | |
| return ERR_PTR(-EINVAL); | |
| struct ti_sci_handle *handle = &info->handle; | |
| if (!handle) | |
| return ERR_PTR(-EINVAL); | |
| ret = ti_sci_cmd_get_revision(handle); | |
| if (ret) | |
| return ERR_PTR(-EINVAL); | |
| return handle; | |
| } | |
| /** | |
| * ti_sci_get_handle() - Get the TI SCI handle for a device | |
| * @dev: Pointer to device for which we want SCI handle | |
| * | |
| * Return: pointer to handle if successful, else EINVAL if invalid conditions | |
| * are encountered. | |
| */ | |
| const struct ti_sci_handle *ti_sci_get_handle(struct udevice *dev) | |
| { | |
| if (!dev) | |
| return ERR_PTR(-EINVAL); | |
| struct udevice *sci_dev = dev_get_parent(dev); | |
| return ti_sci_get_handle_from_sysfw(sci_dev); | |
| } | |
| /** | |
| * ti_sci_get_by_phandle() - Get the TI SCI handle using DT phandle | |
| * @dev: device node | |
| * @propname: property name containing phandle on TISCI node | |
| * | |
| * Return: pointer to handle if successful, else appropriate error value. | |
| */ | |
| const struct ti_sci_handle *ti_sci_get_by_phandle(struct udevice *dev, | |
| const char *property) | |
| { | |
| struct ti_sci_info *entry, *info = NULL; | |
| u32 phandle, err; | |
| ofnode node; | |
| err = ofnode_read_u32(dev_ofnode(dev), property, &phandle); | |
| if (err) | |
| return ERR_PTR(err); | |
| node = ofnode_get_by_phandle(phandle); | |
| if (!ofnode_valid(node)) | |
| return ERR_PTR(-EINVAL); | |
| list_for_each_entry(entry, &ti_sci_list, list) | |
| if (ofnode_equal(dev_ofnode(entry->dev), node)) { | |
| info = entry; | |
| break; | |
| } | |
| if (!info) | |
| return ERR_PTR(-ENODEV); | |
| return &info->handle; | |
| } | |
| /** | |
| * ti_sci_of_to_info() - generate private data from device tree | |
| * @dev: corresponding system controller interface device | |
| * @info: pointer to driver specific private data | |
| * | |
| * Return: 0 if all goes good, else appropriate error message. | |
| */ | |
| static int ti_sci_of_to_info(struct udevice *dev, struct ti_sci_info *info) | |
| { | |
| int ret; | |
| ret = mbox_get_by_name(dev, "tx", &info->chan_tx); | |
| if (ret) { | |
| dev_err(dev, "%s: Acquiring Tx channel failed. ret = %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| ret = mbox_get_by_name(dev, "rx", &info->chan_rx); | |
| if (ret) { | |
| dev_err(dev, "%s: Acquiring Rx channel failed. ret = %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| /* Notify channel is optional. Enable only if populated */ | |
| ret = mbox_get_by_name(dev, "notify", &info->chan_notify); | |
| if (ret) { | |
| dev_dbg(dev, "%s: Acquiring notify channel failed. ret = %d\n", | |
| __func__, ret); | |
| } | |
| info->host_id = dev_read_u32_default(dev, "ti,host-id", | |
| info->desc->default_host_id); | |
| info->is_secure = dev_read_bool(dev, "ti,secure-host"); | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_probe() - Basic probe | |
| * @dev: corresponding system controller interface device | |
| * | |
| * Return: 0 if all goes good, else appropriate error message. | |
| */ | |
| static int ti_sci_probe(struct udevice *dev) | |
| { | |
| struct ti_sci_info *info; | |
| int ret; | |
| debug("%s(dev=%p)\n", __func__, dev); | |
| info = dev_get_priv(dev); | |
| info->desc = (void *)dev_get_driver_data(dev); | |
| ret = ti_sci_of_to_info(dev, info); | |
| if (ret) { | |
| dev_err(dev, "%s: Probe failed with error %d\n", __func__, ret); | |
| return ret; | |
| } | |
| info->dev = dev; | |
| info->seq = 0xA; | |
| INIT_LIST_HEAD(&info->dev_list); | |
| list_add_tail(&info->list, &ti_sci_list); | |
| ti_sci_setup_ops(info); | |
| if (IS_ENABLED(CONFIG_SYSRESET_TI_SCI)) { | |
| ret = device_bind_driver(dev, "ti-sci-sysreset", "sysreset", NULL); | |
| if (ret) | |
| dev_warn(dev, "cannot bind SYSRESET (ret = %d)\n", ret); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ti_sci_dm_probe() - Basic probe for DM to TIFS SCI | |
| * @dev: corresponding system controller interface device | |
| * | |
| * Return: 0 if all goes good, else appropriate error message. | |
| */ | |
| static __maybe_unused int ti_sci_dm_probe(struct udevice *dev) | |
| { | |
| struct ti_sci_rm_core_ops *rm_core_ops; | |
| struct ti_sci_rm_udmap_ops *udmap_ops; | |
| struct ti_sci_rm_ringacc_ops *rops; | |
| struct ti_sci_rm_psil_ops *psilops; | |
| struct ti_sci_ops *ops; | |
| struct ti_sci_info *info; | |
| int ret; | |
| debug("%s(dev=%p)\n", __func__, dev); | |
| info = dev_get_priv(dev); | |
| info->desc = (void *)dev_get_driver_data(dev); | |
| ret = ti_sci_of_to_info(dev, info); | |
| if (ret) { | |
| dev_err(dev, "%s: Probe failed with error %d\n", __func__, ret); | |
| return ret; | |
| } | |
| info->dev = dev; | |
| info->seq = 0xA; | |
| INIT_LIST_HEAD(&info->dev_list); | |
| list_add_tail(&info->list, &ti_sci_list); | |
| ops = &info->handle.ops; | |
| rm_core_ops = &ops->rm_core_ops; | |
| rm_core_ops->get_range = ti_sci_cmd_get_resource_range_static; | |
| rops = &ops->rm_ring_ops; | |
| rops->config = ti_sci_cmd_ring_config; | |
| psilops = &ops->rm_psil_ops; | |
| psilops->pair = ti_sci_cmd_rm_psil_pair; | |
| psilops->unpair = ti_sci_cmd_rm_psil_unpair; | |
| udmap_ops = &ops->rm_udmap_ops; | |
| udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg; | |
| udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg; | |
| udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg_noop; | |
| return ret; | |
| } | |
| /* | |
| * ti_sci_get_free_resource() - Get a free resource from TISCI resource. | |
| * @res: Pointer to the TISCI resource | |
| * | |
| * Return: resource num if all went ok else TI_SCI_RESOURCE_NULL. | |
| */ | |
| u16 ti_sci_get_free_resource(struct ti_sci_resource *res) | |
| { | |
| u16 set, free_bit; | |
| for (set = 0; set < res->sets; set++) { | |
| free_bit = find_first_zero_bit(res->desc[set].res_map, | |
| res->desc[set].num); | |
| if (free_bit != res->desc[set].num) { | |
| set_bit(free_bit, res->desc[set].res_map); | |
| return res->desc[set].start + free_bit; | |
| } | |
| } | |
| return TI_SCI_RESOURCE_NULL; | |
| } | |
| /** | |
| * ti_sci_release_resource() - Release a resource from TISCI resource. | |
| * @res: Pointer to the TISCI resource | |
| */ | |
| void ti_sci_release_resource(struct ti_sci_resource *res, u16 id) | |
| { | |
| u16 set; | |
| for (set = 0; set < res->sets; set++) { | |
| if (res->desc[set].start <= id && | |
| (res->desc[set].num + res->desc[set].start) > id) | |
| clear_bit(id - res->desc[set].start, | |
| res->desc[set].res_map); | |
| } | |
| } | |
| /** | |
| * devm_ti_sci_get_of_resource() - Get a TISCI resource assigned to a device | |
| * @handle: TISCI handle | |
| * @dev: Device pointer to which the resource is assigned | |
| * @of_prop: property name by which the resource are represented | |
| * | |
| * Note: This function expects of_prop to be in the form of tuples | |
| * <type, subtype>. Allocates and initializes ti_sci_resource structure | |
| * for each of_prop. Client driver can directly call | |
| * ti_sci_(get_free, release)_resource apis for handling the resource. | |
| * | |
| * Return: Pointer to ti_sci_resource if all went well else appropriate | |
| * error pointer. | |
| */ | |
| struct ti_sci_resource * | |
| devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, | |
| struct udevice *dev, u32 dev_id, char *of_prop) | |
| { | |
| u32 resource_subtype; | |
| struct ti_sci_resource *res; | |
| bool valid_set = false; | |
| int sets, i, ret; | |
| u32 *temp; | |
| res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL); | |
| if (!res) | |
| return ERR_PTR(-ENOMEM); | |
| sets = dev_read_size(dev, of_prop); | |
| if (sets < 0) { | |
| dev_err(dev, "%s resource type ids not available\n", of_prop); | |
| devm_kfree(dev, res); | |
| return ERR_PTR(sets); | |
| } | |
| temp = devm_kmalloc(dev, sets, GFP_KERNEL); | |
| if (!temp) { | |
| devm_kfree(dev, res); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| sets /= sizeof(u32); | |
| res->sets = sets; | |
| res->desc = devm_kcalloc(dev, res->sets, sizeof(*res->desc), | |
| GFP_KERNEL); | |
| if (!res->desc) { | |
| devm_kfree(dev, temp); | |
| devm_kfree(dev, res); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| ret = dev_read_u32_array(dev, of_prop, temp, res->sets); | |
| if (ret) { | |
| devm_kfree(dev, temp); | |
| devm_kfree(dev, res->desc); | |
| devm_kfree(dev, res); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| for (i = 0; i < res->sets; i++) { | |
| resource_subtype = temp[i]; | |
| ret = handle->ops.rm_core_ops.get_range(handle, dev_id, | |
| resource_subtype, | |
| &res->desc[i].start, | |
| &res->desc[i].num); | |
| if (ret) { | |
| dev_dbg(dev, "type %d subtype %d not allocated for host %d\n", | |
| dev_id, resource_subtype, | |
| handle_to_ti_sci_info(handle)->host_id); | |
| res->desc[i].start = 0; | |
| res->desc[i].num = 0; | |
| continue; | |
| } | |
| valid_set = true; | |
| dev_dbg(dev, "res type = %d, subtype = %d, start = %d, num = %d\n", | |
| dev_id, resource_subtype, res->desc[i].start, | |
| res->desc[i].num); | |
| res->desc[i].res_map = | |
| devm_kzalloc(dev, BITS_TO_LONGS(res->desc[i].num) * | |
| sizeof(*res->desc[i].res_map), GFP_KERNEL); | |
| if (!res->desc[i].res_map) { | |
| int j; | |
| devm_kfree(dev, temp); | |
| for (j = 0; j < i; j++) | |
| devm_kfree(dev, res->desc[j].res_map); | |
| devm_kfree(dev, res->desc); | |
| devm_kfree(dev, res); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| } | |
| devm_kfree(dev, temp); | |
| if (valid_set) | |
| return res; | |
| for (i = 0; i < res->sets; i++) | |
| devm_kfree(dev, res->desc[i].res_map); | |
| devm_kfree(dev, res->desc); | |
| devm_kfree(dev, res); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| /* Description for K2G */ | |
| static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = { | |
| .default_host_id = 2, | |
| /* Conservative duration */ | |
| .max_rx_timeout_ms = 10000, | |
| /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */ | |
| .max_msgs = 20, | |
| .max_msg_size = 64, | |
| }; | |
| /* Description for AM654 */ | |
| static const struct ti_sci_desc ti_sci_pmmc_am654_desc = { | |
| .default_host_id = 12, | |
| /* Conservative duration */ | |
| .max_rx_timeout_ms = 10000, | |
| /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */ | |
| .max_msgs = 20, | |
| .max_msg_size = 60, | |
| }; | |
| /* Description for J721e DM to DMSC communication */ | |
| static const struct ti_sci_desc ti_sci_dm_j721e_desc = { | |
| .default_host_id = 3, | |
| .max_rx_timeout_ms = 10000, | |
| .max_msgs = 20, | |
| .max_msg_size = 60, | |
| }; | |
| static const struct udevice_id ti_sci_ids[] = { | |
| { | |
| .compatible = "ti,k2g-sci", | |
| .data = (ulong)&ti_sci_pmmc_k2g_desc | |
| }, | |
| { | |
| .compatible = "ti,am654-sci", | |
| .data = (ulong)&ti_sci_pmmc_am654_desc | |
| }, | |
| { /* Sentinel */ }, | |
| }; | |
| static __maybe_unused const struct udevice_id ti_sci_dm_ids[] = { | |
| { | |
| .compatible = "ti,j721e-dm-sci", | |
| .data = (ulong)&ti_sci_dm_j721e_desc | |
| }, | |
| { /* Sentinel */ }, | |
| }; | |
| U_BOOT_DRIVER(ti_sci) = { | |
| .name = "ti_sci", | |
| .id = UCLASS_FIRMWARE, | |
| .of_match = ti_sci_ids, | |
| .probe = ti_sci_probe, | |
| .priv_auto = sizeof(struct ti_sci_info), | |
| .flags = DM_FLAG_PRE_RELOC, | |
| }; | |
| #if IS_ENABLED(CONFIG_K3_DM_FW) | |
| U_BOOT_DRIVER(ti_sci_dm) = { | |
| .name = "ti_sci_dm", | |
| .id = UCLASS_FIRMWARE, | |
| .of_match = ti_sci_dm_ids, | |
| .probe = ti_sci_dm_probe, | |
| .priv_auto = sizeof(struct ti_sci_info), | |
| }; | |
| #endif |