| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Generic code used to generate ACPI tables | |
| * | |
| * Copyright 2019 Google LLC | |
| */ | |
| #include <bloblist.h> | |
| #include <cpu.h> | |
| #include <dm.h> | |
| #include <efi_api.h> | |
| #include <efi_loader.h> | |
| #include <log.h> | |
| #include <mapmem.h> | |
| #include <tables_csum.h> | |
| #include <serial.h> | |
| #include <version_string.h> | |
| #include <acpi/acpi_table.h> | |
| #include <acpi/acpi_device.h> | |
| #include <asm/global_data.h> | |
| #include <dm/acpi.h> | |
| #include <linux/sizes.h> | |
| #include <linux/log2.h> | |
| enum { | |
| TABLE_SIZE = SZ_64K, | |
| }; | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /* | |
| * OEM_REVISION is 32-bit unsigned number. It should be increased only when | |
| * changing software version. Therefore it should not depend on build time. | |
| * U-Boot calculates it from U-Boot version and represent it in hexadecimal | |
| * notation. As U-Boot version is in form year.month set low 8 bits to 0x01 | |
| * to have valid date. So for U-Boot version 2021.04 OEM_REVISION is set to | |
| * value 0x20210401. | |
| */ | |
| #define OEM_REVISION ((((version_num / 1000) % 10) << 28) | \ | |
| (((version_num / 100) % 10) << 24) | \ | |
| (((version_num / 10) % 10) << 20) | \ | |
| ((version_num % 10) << 16) | \ | |
| (((version_num_patch / 10) % 10) << 12) | \ | |
| ((version_num_patch % 10) << 8) | \ | |
| 0x01) | |
| int acpi_create_dmar(struct acpi_dmar *dmar, enum dmar_flags flags) | |
| { | |
| struct acpi_table_header *header = &dmar->header; | |
| struct cpu_info info; | |
| struct udevice *cpu; | |
| int ret; | |
| ret = uclass_first_device_err(UCLASS_CPU, &cpu); | |
| if (ret) | |
| return log_msg_ret("cpu", ret); | |
| ret = cpu_get_info(cpu, &info); | |
| if (ret) | |
| return log_msg_ret("info", ret); | |
| memset((void *)dmar, 0, sizeof(struct acpi_dmar)); | |
| /* Fill out header fields. */ | |
| acpi_fill_header(&dmar->header, "DMAR"); | |
| header->length = sizeof(struct acpi_dmar); | |
| header->revision = acpi_get_table_revision(ACPITAB_DMAR); | |
| dmar->host_address_width = info.address_width - 1; | |
| dmar->flags = flags; | |
| header->checksum = table_compute_checksum(dmar, header->length); | |
| return 0; | |
| } | |
| int acpi_get_table_revision(enum acpi_tables table) | |
| { | |
| switch (table) { | |
| case ACPITAB_FADT: | |
| return ACPI_FADT_REV_ACPI_6_0; | |
| case ACPITAB_MADT: | |
| return ACPI_MADT_REV_ACPI_6_2; | |
| case ACPITAB_MCFG: | |
| return ACPI_MCFG_REV_ACPI_3_0; | |
| case ACPITAB_TCPA: | |
| /* This version and the rest are open-coded */ | |
| return 2; | |
| case ACPITAB_TPM2: | |
| return 4; | |
| case ACPITAB_SSDT: /* ACPI 3.0 upto 6.3: 2 */ | |
| return 2; | |
| case ACPITAB_SRAT: /* ACPI 2.0: 1, ACPI 3.0: 2, ACPI 4.0 to 6.3: 3 */ | |
| return 1; /* TODO Should probably be upgraded to 2 */ | |
| case ACPITAB_DMAR: | |
| return 1; | |
| case ACPITAB_SLIT: /* ACPI 2.0 upto 6.3: 1 */ | |
| return 1; | |
| case ACPITAB_SPMI: /* IMPI 2.0 */ | |
| return 5; | |
| case ACPITAB_HPET: /* Currently 1. Table added in ACPI 2.0 */ | |
| return 1; | |
| case ACPITAB_VFCT: /* ACPI 2.0/3.0/4.0: 1 */ | |
| return 1; | |
| case ACPITAB_IVRS: | |
| return IVRS_FORMAT_FIXED; | |
| case ACPITAB_DBG2: | |
| return 0; | |
| case ACPITAB_FACS: /* ACPI 2.0/3.0: 1, ACPI 4.0 to 6.3: 2 */ | |
| return 1; | |
| case ACPITAB_RSDT: /* ACPI 1.0 upto 6.3: 1 */ | |
| return 1; | |
| case ACPITAB_XSDT: /* ACPI 2.0 upto 6.3: 1 */ | |
| return 1; | |
| case ACPITAB_RSDP: /* ACPI 2.0 upto 6.3: 2 */ | |
| return 2; | |
| case ACPITAB_HEST: | |
| return 1; | |
| case ACPITAB_NHLT: | |
| return 5; | |
| case ACPITAB_BERT: | |
| return 1; | |
| case ACPITAB_SPCR: | |
| return 2; | |
| case ACPITAB_PPTT: /* ACPI 6.2: 1 */ | |
| return 1; | |
| case ACPITAB_GTDT: /* ACPI 6.2: 2, ACPI 6.3: 3 */ | |
| return 2; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| void acpi_fill_header(struct acpi_table_header *header, char *signature) | |
| { | |
| memcpy(header->signature, signature, 4); | |
| memcpy(header->oem_id, OEM_ID, 6); | |
| memcpy(header->oem_table_id, OEM_TABLE_ID, 8); | |
| header->oem_revision = OEM_REVISION; | |
| memcpy(header->creator_id, ACPI_CREATOR_ID, 4); | |
| header->creator_revision = ACPI_CREATOR_REVISION; | |
| } | |
| void acpi_align(struct acpi_ctx *ctx) | |
| { | |
| ctx->current = (void *)ALIGN((ulong)ctx->current, 16); | |
| } | |
| void acpi_align64(struct acpi_ctx *ctx) | |
| { | |
| ctx->current = (void *)ALIGN((ulong)ctx->current, 64); | |
| } | |
| void acpi_inc(struct acpi_ctx *ctx, uint amount) | |
| { | |
| ctx->current += amount; | |
| } | |
| void acpi_inc_align(struct acpi_ctx *ctx, uint amount) | |
| { | |
| ctx->current += amount; | |
| acpi_align(ctx); | |
| } | |
| /** | |
| * Add an ACPI table to the RSDT (and XSDT) structure, recalculate length | |
| * and checksum. | |
| */ | |
| int acpi_add_table(struct acpi_ctx *ctx, void *table) | |
| { | |
| int i, entries_num; | |
| struct acpi_rsdt *rsdt; | |
| struct acpi_xsdt *xsdt; | |
| /* On legacy x86 platforms the RSDT is mandatory while the XSDT is not. | |
| * On other platforms there might be no memory below 4GiB, thus RSDT is NULL. | |
| */ | |
| if (ctx->rsdt) { | |
| rsdt = ctx->rsdt; | |
| /* This should always be MAX_ACPI_TABLES */ | |
| entries_num = ARRAY_SIZE(rsdt->entry); | |
| for (i = 0; i < entries_num; i++) { | |
| if (rsdt->entry[i] == 0) | |
| break; | |
| } | |
| if (i >= entries_num) { | |
| log_err("ACPI: Error: too many tables\n"); | |
| return -E2BIG; | |
| } | |
| /* Add table to the RSDT */ | |
| rsdt->entry[i] = nomap_to_sysmem(table); | |
| /* Fix RSDT length or the kernel will assume invalid entries */ | |
| rsdt->header.length = sizeof(struct acpi_table_header) + | |
| (sizeof(u32) * (i + 1)); | |
| /* Re-calculate checksum */ | |
| acpi_update_checksum(&rsdt->header); | |
| } | |
| if (ctx->xsdt) { | |
| /* | |
| * And now the same thing for the XSDT. We use the same index as for | |
| * now we want the XSDT and RSDT to always be in sync in U-Boot | |
| */ | |
| xsdt = ctx->xsdt; | |
| /* This should always be MAX_ACPI_TABLES */ | |
| entries_num = ARRAY_SIZE(xsdt->entry); | |
| for (i = 0; i < entries_num; i++) { | |
| if (xsdt->entry[i] == 0) | |
| break; | |
| } | |
| if (i >= entries_num) { | |
| log_err("ACPI: Error: too many tables\n"); | |
| return -E2BIG; | |
| } | |
| /* Add table to the XSDT */ | |
| xsdt->entry[i] = nomap_to_sysmem(table); | |
| /* Fix XSDT length */ | |
| xsdt->header.length = sizeof(struct acpi_table_header) + | |
| (sizeof(u64) * (i + 1)); | |
| /* Re-calculate checksum */ | |
| acpi_update_checksum(&xsdt->header); | |
| } | |
| return 0; | |
| } | |
| int acpi_write_fadt(struct acpi_ctx *ctx, const struct acpi_writer *entry) | |
| { | |
| struct acpi_table_header *header; | |
| struct acpi_fadt *fadt; | |
| fadt = ctx->current; | |
| header = &fadt->header; | |
| memset((void *)fadt, '\0', sizeof(struct acpi_fadt)); | |
| acpi_fill_header(header, "FACP"); | |
| header->length = sizeof(struct acpi_fadt); | |
| header->revision = acpi_get_table_revision(ACPITAB_FADT); | |
| memcpy(header->oem_id, OEM_ID, 6); | |
| memcpy(header->oem_table_id, OEM_TABLE_ID, 8); | |
| memcpy(header->creator_id, ACPI_CREATOR_ID, 4); | |
| header->creator_revision = 1; | |
| fadt->minor_revision = 2; | |
| fadt->x_firmware_ctrl = nomap_to_sysmem(ctx->facs); | |
| fadt->x_dsdt = nomap_to_sysmem(ctx->dsdt); | |
| if (fadt->x_firmware_ctrl < 0x100000000ULL) | |
| fadt->firmware_ctrl = fadt->x_firmware_ctrl; | |
| if (fadt->x_dsdt < 0x100000000ULL) | |
| fadt->dsdt = fadt->x_dsdt; | |
| fadt->preferred_pm_profile = ACPI_PM_UNSPECIFIED; | |
| acpi_fill_fadt(fadt); | |
| acpi_update_checksum(header); | |
| return acpi_add_fadt(ctx, fadt); | |
| } | |
| #ifndef CONFIG_QFW_ACPI | |
| ACPI_WRITER(5fadt, "FADT", acpi_write_fadt, 0); | |
| #endif | |
| int acpi_write_madt(struct acpi_ctx *ctx, const struct acpi_writer *entry) | |
| { | |
| struct acpi_table_header *header; | |
| struct acpi_madt *madt; | |
| void *current; | |
| madt = ctx->current; | |
| memset(madt, '\0', sizeof(struct acpi_madt)); | |
| header = &madt->header; | |
| /* Fill out header fields */ | |
| acpi_fill_header(header, "APIC"); | |
| header->length = sizeof(struct acpi_madt); | |
| header->revision = acpi_get_table_revision(ACPITAB_MADT); | |
| acpi_inc(ctx, sizeof(struct acpi_madt)); | |
| /* TODO: Get rid of acpi_fill_madt and use driver model */ | |
| current = acpi_fill_madt(madt, ctx); | |
| /* (Re)calculate length and checksum */ | |
| header->length = (uintptr_t)current - (uintptr_t)madt; | |
| if (IS_ENABLED(CONFIG_ACPI_PARKING_PROTOCOL)) | |
| acpi_write_park(madt); | |
| acpi_update_checksum(header); | |
| acpi_add_table(ctx, madt); | |
| ctx->current = (void *)madt + madt->header.length; | |
| return 0; | |
| } | |
| #ifndef CONFIG_QFW_ACPI | |
| ACPI_WRITER(5madt, "MADT", acpi_write_madt, 0); | |
| #endif | |
| void acpi_create_dbg2(struct acpi_dbg2_header *dbg2, | |
| int port_type, int port_subtype, | |
| struct acpi_gen_regaddr *address, u32 address_size, | |
| const char *device_path) | |
| { | |
| uintptr_t current; | |
| struct acpi_dbg2_device *device; | |
| u32 *dbg2_addr_size; | |
| struct acpi_table_header *header; | |
| size_t path_len; | |
| const char *path; | |
| char *namespace; | |
| /* Fill out header fields. */ | |
| current = (uintptr_t)dbg2; | |
| memset(dbg2, '\0', sizeof(struct acpi_dbg2_header)); | |
| header = &dbg2->header; | |
| header->revision = acpi_get_table_revision(ACPITAB_DBG2); | |
| acpi_fill_header(header, "DBG2"); | |
| /* One debug device defined */ | |
| dbg2->devices_offset = sizeof(struct acpi_dbg2_header); | |
| dbg2->devices_count = 1; | |
| current += sizeof(struct acpi_dbg2_header); | |
| /* Device comes after the header */ | |
| device = (struct acpi_dbg2_device *)current; | |
| memset(device, 0, sizeof(struct acpi_dbg2_device)); | |
| current += sizeof(struct acpi_dbg2_device); | |
| device->revision = 0; | |
| device->address_count = 1; | |
| device->port_type = port_type; | |
| device->port_subtype = port_subtype; | |
| /* Base Address comes after device structure */ | |
| memcpy((void *)current, address, sizeof(struct acpi_gen_regaddr)); | |
| device->base_address_offset = current - (uintptr_t)device; | |
| current += sizeof(struct acpi_gen_regaddr); | |
| /* Address Size comes after address structure */ | |
| dbg2_addr_size = (uint32_t *)current; | |
| device->address_size_offset = current - (uintptr_t)device; | |
| *dbg2_addr_size = address_size; | |
| current += sizeof(uint32_t); | |
| /* Namespace string comes last, use '.' if not provided */ | |
| path = device_path ? : "."; | |
| /* Namespace string length includes NULL terminator */ | |
| path_len = strlen(path) + 1; | |
| namespace = (char *)current; | |
| device->namespace_string_length = path_len; | |
| device->namespace_string_offset = current - (uintptr_t)device; | |
| strncpy(namespace, path, path_len); | |
| current += path_len; | |
| /* Update structure lengths and checksum */ | |
| device->length = current - (uintptr_t)device; | |
| header->length = current - (uintptr_t)dbg2; | |
| acpi_update_checksum(header); | |
| } | |
| int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev, | |
| uint access_size) | |
| { | |
| struct acpi_dbg2_header *dbg2 = ctx->current; | |
| char path[ACPI_PATH_MAX]; | |
| struct acpi_gen_regaddr address; | |
| u64 addr; | |
| int ret; | |
| if (!device_active(dev)) { | |
| log_info("Device not enabled\n"); | |
| return -EACCES; | |
| } | |
| /* | |
| * PCI devices don't remember their resource allocation information in | |
| * U-Boot at present. We assume that MMIO is used for the UART and that | |
| * the address space is 32 bytes: ns16550 uses 8 registers of up to | |
| * 32-bits each. This is only for debugging so it is not a big deal. | |
| */ | |
| addr = dm_pci_read_bar32(dev, 0); | |
| log_debug("UART addr %lx\n", (ulong)addr); | |
| ret = acpi_device_path(dev, path, sizeof(path)); | |
| if (ret) | |
| return log_msg_ret("path", ret); | |
| memset(&address, '\0', sizeof(address)); | |
| address.space_id = ACPI_ADDRESS_SPACE_MEMORY; | |
| address.addrl = (uint32_t)addr; | |
| address.addrh = (uint32_t)((addr >> 32) & 0xffffffff); | |
| address.access_size = access_size; | |
| ret = acpi_device_path(dev, path, sizeof(path)); | |
| if (ret) | |
| return log_msg_ret("path", ret); | |
| acpi_create_dbg2(dbg2, ACPI_DBG2_SERIAL_PORT, | |
| ACPI_DBG2_16550_COMPATIBLE, &address, 0x1000, path); | |
| acpi_inc_align(ctx, dbg2->header.length); | |
| acpi_add_table(ctx, dbg2); | |
| return 0; | |
| } | |
| static int acpi_write_spcr(struct acpi_ctx *ctx, const struct acpi_writer *entry) | |
| { | |
| struct serial_device_info serial_info = {0}; | |
| u64 serial_address, serial_offset; | |
| struct acpi_table_header *header; | |
| struct acpi_spcr *spcr; | |
| struct udevice *dev; | |
| uint serial_config; | |
| uint serial_width; | |
| int access_size; | |
| int space_id; | |
| int ret = -ENODEV; | |
| spcr = ctx->current; | |
| header = &spcr->header; | |
| memset(spcr, '\0', sizeof(struct acpi_spcr)); | |
| /* Fill out header fields */ | |
| acpi_fill_header(header, "SPCR"); | |
| header->length = sizeof(struct acpi_spcr); | |
| header->revision = 2; | |
| /* Read the device once, here. It is reused below */ | |
| dev = gd->cur_serial_dev; | |
| if (dev) | |
| ret = serial_getinfo(dev, &serial_info); | |
| if (ret) | |
| serial_info.type = SERIAL_CHIP_UNKNOWN; | |
| /* Encode chip type */ | |
| switch (serial_info.type) { | |
| case SERIAL_CHIP_16550_COMPATIBLE: | |
| spcr->interface_type = ACPI_DBG2_16550_COMPATIBLE; | |
| break; | |
| case SERIAL_CHIP_PL01X: | |
| spcr->interface_type = ACPI_DBG2_ARM_PL011; | |
| break; | |
| case SERIAL_CHIP_UNKNOWN: | |
| default: | |
| spcr->interface_type = ACPI_DBG2_UNKNOWN; | |
| break; | |
| } | |
| /* Encode address space */ | |
| switch (serial_info.addr_space) { | |
| case SERIAL_ADDRESS_SPACE_MEMORY: | |
| space_id = ACPI_ADDRESS_SPACE_MEMORY; | |
| break; | |
| case SERIAL_ADDRESS_SPACE_IO: | |
| default: | |
| space_id = ACPI_ADDRESS_SPACE_IO; | |
| break; | |
| } | |
| serial_width = serial_info.reg_width * 8; | |
| serial_offset = ((u64)serial_info.reg_offset) << serial_info.reg_shift; | |
| serial_address = serial_info.addr + serial_offset; | |
| /* Encode register access size */ | |
| switch (serial_info.reg_shift) { | |
| case 0: | |
| access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; | |
| break; | |
| case 1: | |
| access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; | |
| break; | |
| case 2: | |
| access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; | |
| break; | |
| case 3: | |
| access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS; | |
| break; | |
| default: | |
| access_size = ACPI_ACCESS_SIZE_UNDEFINED; | |
| break; | |
| } | |
| debug("UART type %u @ %llx\n", spcr->interface_type, serial_address); | |
| /* Fill GAS */ | |
| spcr->serial_port.space_id = space_id; | |
| spcr->serial_port.bit_width = serial_width; | |
| spcr->serial_port.bit_offset = 0; | |
| spcr->serial_port.access_size = access_size; | |
| spcr->serial_port.addrl = lower_32_bits(serial_address); | |
| spcr->serial_port.addrh = upper_32_bits(serial_address); | |
| /* Encode baud rate */ | |
| switch (serial_info.baudrate) { | |
| case 9600: | |
| spcr->baud_rate = 3; | |
| break; | |
| case 19200: | |
| spcr->baud_rate = 4; | |
| break; | |
| case 57600: | |
| spcr->baud_rate = 6; | |
| break; | |
| case 115200: | |
| spcr->baud_rate = 7; | |
| break; | |
| default: | |
| spcr->baud_rate = 0; | |
| break; | |
| } | |
| serial_config = SERIAL_DEFAULT_CONFIG; | |
| if (dev) | |
| ret = serial_getconfig(dev, &serial_config); | |
| spcr->parity = SERIAL_GET_PARITY(serial_config); | |
| spcr->stop_bits = SERIAL_GET_STOP(serial_config); | |
| /* No PCI devices for now */ | |
| spcr->pci_device_id = 0xffff; | |
| spcr->pci_vendor_id = 0xffff; | |
| /* | |
| * SPCR has no clue if the UART base clock speed is different | |
| * to the default one. However, the SPCR 1.04 defines baud rate | |
| * 0 as a preconfigured state of UART and OS is supposed not | |
| * to touch the configuration of the serial device. | |
| */ | |
| if (serial_info.clock != SERIAL_DEFAULT_CLOCK) | |
| spcr->baud_rate = 0; | |
| /* Fix checksum */ | |
| acpi_update_checksum(header); | |
| acpi_add_table(ctx, spcr); | |
| acpi_inc(ctx, spcr->header.length); | |
| return 0; | |
| } | |
| ACPI_WRITER(5spcr, "SPCR", acpi_write_spcr, 0); | |
| __weak int acpi_fill_iort(struct acpi_ctx *ctx) | |
| { | |
| return 0; | |
| } | |
| int acpi_iort_add_its_group(struct acpi_ctx *ctx, | |
| const u32 its_count, | |
| const u32 *identifiers) | |
| { | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_its_group *group; | |
| int offset; | |
| offset = ctx->current - ctx->tab_start; | |
| node = ctx->current; | |
| memset(node, '\0', sizeof(struct acpi_iort_node)); | |
| node->type = ACPI_IORT_NODE_ITS_GROUP; | |
| node->revision = 1; | |
| node->length = sizeof(struct acpi_iort_node); | |
| node->length += sizeof(struct acpi_iort_its_group); | |
| node->length += sizeof(u32) * its_count; | |
| group = (struct acpi_iort_its_group *)node->node_data; | |
| group->its_count = its_count; | |
| memcpy(&group->identifiers, identifiers, sizeof(u32) * its_count); | |
| ctx->current += node->length; | |
| return offset; | |
| } | |
| int acpi_iort_add_named_component(struct acpi_ctx *ctx, | |
| const u32 node_flags, | |
| const u64 memory_properties, | |
| const u8 memory_address_limit, | |
| const char *device_name) | |
| { | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_named_component *comp; | |
| int offset; | |
| offset = ctx->current - ctx->tab_start; | |
| node = ctx->current; | |
| memset(node, '\0', sizeof(struct acpi_iort_node)); | |
| node->type = ACPI_IORT_NODE_NAMED_COMPONENT; | |
| node->revision = 4; | |
| node->length = sizeof(struct acpi_iort_node); | |
| node->length += sizeof(struct acpi_iort_named_component); | |
| node->length += strlen(device_name) + 1; | |
| comp = (struct acpi_iort_named_component *)node->node_data; | |
| memset(comp, '\0', sizeof(struct acpi_iort_named_component)); | |
| comp->node_flags = node_flags; | |
| comp->memory_properties = memory_properties; | |
| comp->memory_address_limit = memory_address_limit; | |
| memcpy(comp->device_name, device_name, strlen(device_name) + 1); | |
| ctx->current += node->length; | |
| return offset; | |
| } | |
| int acpi_iort_add_rc(struct acpi_ctx *ctx, | |
| const u64 mem_access_properties, | |
| const u32 ats_attributes, | |
| const u32 pci_segment_number, | |
| const u8 memory_address_size_limit, | |
| const int num_mappings, | |
| const struct acpi_iort_id_mapping *map) | |
| { | |
| struct acpi_iort_id_mapping *mapping; | |
| struct acpi_iort_node *output_node; | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_rc *rc; | |
| int offset; | |
| offset = ctx->current - ctx->tab_start; | |
| node = ctx->current; | |
| memset(node, '\0', sizeof(struct acpi_iort_node)); | |
| node->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX; | |
| node->revision = 2; | |
| node->mapping_count = num_mappings; | |
| if (num_mappings) | |
| node->mapping_offset = sizeof(struct acpi_iort_node) + | |
| sizeof(struct acpi_iort_rc); | |
| node->length = sizeof(struct acpi_iort_node); | |
| node->length += sizeof(struct acpi_iort_rc); | |
| node->length += sizeof(struct acpi_iort_id_mapping) * num_mappings; | |
| rc = (struct acpi_iort_rc *)node->node_data; | |
| memset(rc, '\0', sizeof(struct acpi_iort_rc)); | |
| rc->mem_access_properties = mem_access_properties; | |
| rc->ats_attributes = ats_attributes; | |
| rc->pci_segment_number = pci_segment_number; | |
| rc->memory_address_size_limit = memory_address_size_limit; | |
| mapping = (struct acpi_iort_id_mapping *)(rc + 1); | |
| for (int i = 0; i < num_mappings; i++) { | |
| /* Validate input */ | |
| output_node = (struct acpi_iort_node *)ctx->tab_start + map[i].output_reference; | |
| /* ID mappings can use SMMUs or ITS groups as output references */ | |
| assert(output_node && ((output_node->type == ACPI_IORT_NODE_ITS_GROUP) || | |
| (output_node->type == ACPI_IORT_NODE_SMMU) || | |
| (output_node->type == ACPI_IORT_NODE_SMMU_V3))); | |
| memcpy(mapping, &map[i], sizeof(struct acpi_iort_id_mapping)); | |
| mapping++; | |
| } | |
| ctx->current += node->length; | |
| return offset; | |
| } | |
| int acpi_iort_add_smmu_v3(struct acpi_ctx *ctx, | |
| const u64 base_address, | |
| const u32 flags, | |
| const u64 vatos_address, | |
| const u32 model, | |
| const u32 event_gsiv, | |
| const u32 pri_gsiv, | |
| const u32 gerr_gsiv, | |
| const u32 sync_gsiv, | |
| const u32 pxm, | |
| const u32 id_mapping_index, | |
| const int num_mappings, | |
| const struct acpi_iort_id_mapping *map) | |
| { | |
| struct acpi_iort_node *node; | |
| struct acpi_iort_node *output_node; | |
| struct acpi_iort_smmu_v3 *smmu; | |
| struct acpi_iort_id_mapping *mapping; | |
| int offset; | |
| offset = ctx->current - ctx->tab_start; | |
| node = ctx->current; | |
| memset(node, '\0', sizeof(struct acpi_iort_node)); | |
| node->type = ACPI_IORT_NODE_SMMU_V3; | |
| node->revision = 5; | |
| node->mapping_count = num_mappings; | |
| if (num_mappings) | |
| node->mapping_offset = sizeof(struct acpi_iort_node) + | |
| sizeof(struct acpi_iort_smmu_v3); | |
| node->length = sizeof(struct acpi_iort_node); | |
| node->length += sizeof(struct acpi_iort_smmu_v3); | |
| node->length += sizeof(struct acpi_iort_id_mapping) * num_mappings; | |
| smmu = (struct acpi_iort_smmu_v3 *)node->node_data; | |
| memset(smmu, '\0', sizeof(struct acpi_iort_smmu_v3)); | |
| smmu->base_address = base_address; | |
| smmu->flags = flags; | |
| smmu->vatos_address = vatos_address; | |
| smmu->model = model; | |
| smmu->event_gsiv = event_gsiv; | |
| smmu->pri_gsiv = pri_gsiv; | |
| smmu->gerr_gsiv = gerr_gsiv; | |
| smmu->sync_gsiv = sync_gsiv; | |
| smmu->pxm = pxm; | |
| smmu->id_mapping_index = id_mapping_index; | |
| mapping = (struct acpi_iort_id_mapping *)(smmu + 1); | |
| for (int i = 0; i < num_mappings; i++) { | |
| /* Validate input */ | |
| output_node = (struct acpi_iort_node *)ctx->tab_start + map[i].output_reference; | |
| /* | |
| * ID mappings of an SMMUv3 node can only have ITS group nodes | |
| * as output references. | |
| */ | |
| assert(output_node && output_node->type == ACPI_IORT_NODE_ITS_GROUP); | |
| memcpy(mapping, &map[i], sizeof(struct acpi_iort_id_mapping)); | |
| mapping++; | |
| } | |
| ctx->current += node->length; | |
| return offset; | |
| } | |
| static int acpi_write_iort(struct acpi_ctx *ctx, const struct acpi_writer *entry) | |
| { | |
| struct acpi_table_iort *iort; | |
| struct acpi_iort_node *node; | |
| u32 offset; | |
| int ret; | |
| iort = ctx->current; | |
| ctx->tab_start = ctx->current; | |
| memset(iort, '\0', sizeof(struct acpi_table_iort)); | |
| acpi_fill_header(&iort->header, "IORT"); | |
| iort->header.revision = 1; | |
| iort->header.creator_revision = 1; | |
| iort->header.length = sizeof(struct acpi_table_iort); | |
| iort->node_offset = sizeof(struct acpi_table_iort); | |
| acpi_inc(ctx, sizeof(struct acpi_table_iort)); | |
| offset = sizeof(struct acpi_table_iort); | |
| ret = acpi_fill_iort(ctx); | |
| if (ret) { | |
| ctx->current = iort; | |
| return log_msg_ret("fill", ret); | |
| } | |
| /* Count nodes filled in */ | |
| for (node = (void *)iort + iort->node_offset; | |
| node->length > 0 && (void *)node < ctx->current; | |
| node = (void *)node + node->length) | |
| iort->node_count++; | |
| /* (Re)calculate length and checksum */ | |
| iort->header.length = ctx->current - (void *)iort; | |
| acpi_update_checksum(&iort->header); | |
| log_debug("IORT at %p, length %x\n", iort, iort->header.length); | |
| /* Drop the table if it is empty */ | |
| if (iort->header.length == sizeof(struct acpi_table_iort)) | |
| return log_msg_ret("fill", -ENOENT); | |
| acpi_add_table(ctx, iort); | |
| return 0; | |
| } | |
| ACPI_WRITER(5iort, "IORT", acpi_write_iort, 0); | |
| /* | |
| * Allocate memory for ACPI tables and write ACPI tables to the | |
| * allocated buffer. | |
| * | |
| * Return: status code | |
| */ | |
| static int alloc_write_acpi_tables(void) | |
| { | |
| u64 table_end; | |
| void *addr; | |
| if (IS_ENABLED(CONFIG_X86) || | |
| IS_ENABLED(CONFIG_QFW_ACPI) || | |
| IS_ENABLED(CONFIG_SANDBOX)) { | |
| log_debug("Skipping writing ACPI tables as already done\n"); | |
| return 0; | |
| } | |
| if (!IS_ENABLED(CONFIG_BLOBLIST_TABLES)) { | |
| log_debug("Skipping writing ACPI tables as BLOBLIST_TABLES is not selected\n"); | |
| return 0; | |
| } | |
| /* Align the table to a 4KB boundary to keep EFI happy */ | |
| addr = bloblist_add(BLOBLISTT_ACPI_TABLES, TABLE_SIZE, | |
| ilog2(SZ_4K)); | |
| if (!addr) | |
| return log_msg_ret("mem", -ENOMEM); | |
| gd->arch.table_start_high = virt_to_phys(addr); | |
| gd->arch.table_end_high = gd->arch.table_start_high + TABLE_SIZE; | |
| table_end = write_acpi_tables(gd->arch.table_start_high); | |
| if (!table_end) { | |
| log_err("Can't create ACPI configuration table\n"); | |
| return -EINTR; | |
| } | |
| log_debug("- wrote 'acpi' to %lx, end %llx\n", gd->arch.table_start_high, table_end); | |
| if (table_end > gd->arch.table_end_high) { | |
| log_err("Out of space for configuration tables: need %llx, have %x\n", | |
| table_end - gd->arch.table_start_high, TABLE_SIZE); | |
| return log_msg_ret("acpi", -ENOSPC); | |
| } | |
| log_debug("- done writing tables\n"); | |
| return 0; | |
| } | |
| EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, alloc_write_acpi_tables); |