| /* | |
| * (C) Copyright 2014 | |
| * Texas Instruments Incorporated. | |
| * Felipe Balbi <balbi@ti.com> | |
| * | |
| * Configuration settings for the TI Beagle x15 board. | |
| * See ti_omap5_common.h for omap5 common settings. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef __CONFIG_BEAGLE_X15_H | |
| #define __CONFIG_BEAGLE_X15_H | |
| #define CONFIG_AM57XX | |
| #ifdef CONFIG_SPL_BUILD | |
| #define CONFIG_IODELAY_RECALIBRATION | |
| #endif | |
| #define CONFIG_BOARD_EARLY_INIT_F | |
| #define CONFIG_NR_DRAM_BANKS 2 | |
| #define CONFIG_ENV_SIZE (64 << 10) | |
| #define CONFIG_ENV_IS_IN_FAT | |
| #define FAT_ENV_INTERFACE "mmc" | |
| #define FAT_ENV_DEVICE_AND_PART "0:1" | |
| #define FAT_ENV_FILE "uboot.env" | |
| #define CONSOLEDEV "ttyO2" | |
| #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ | |
| #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ | |
| #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ | |
| #define CONFIG_BAUDRATE 115200 | |
| #define CONFIG_SYS_OMAP_ABE_SYSCK | |
| /* Define the default GPT table for eMMC */ | |
| #define PARTS_DEFAULT \ | |
| "uuid_disk=${uuid_gpt_disk};" \ | |
| "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" | |
| #include <configs/ti_omap5_common.h> | |
| /* Enhance our eMMC support / experience. */ | |
| #define CONFIG_CMD_GPT | |
| #define CONFIG_EFI_PARTITION | |
| /* CPSW Ethernet */ | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ | |
| #define CONFIG_BOOTP_DNS2 | |
| #define CONFIG_BOOTP_SEND_HOSTNAME | |
| #define CONFIG_BOOTP_GATEWAY | |
| #define CONFIG_BOOTP_SUBNETMASK | |
| #define CONFIG_NET_RETRY_COUNT 10 | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ | |
| #define CONFIG_MII /* Required in net/eth.c */ | |
| #define CONFIG_PHY_GIGE /* per-board part of CPSW */ | |
| #define CONFIG_PHYLIB | |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ | |
| #define CONFIG_SUPPORT_EMMC_BOOT | |
| /* USB xHCI HOST */ | |
| #define CONFIG_CMD_USB | |
| #define CONFIG_USB_HOST | |
| #define CONFIG_USB_XHCI | |
| #define CONFIG_USB_XHCI_OMAP | |
| #define CONFIG_USB_STORAGE | |
| #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 | |
| #define CONFIG_OMAP_USB_PHY | |
| #define CONFIG_OMAP_USB3PHY1_HOST | |
| /* SATA */ | |
| #define CONFIG_BOARD_LATE_INIT | |
| #define CONFIG_CMD_SCSI | |
| #define CONFIG_LIBATA | |
| #define CONFIG_SCSI_AHCI | |
| #define CONFIG_SCSI_AHCI_PLAT | |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 | |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 | |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ | |
| CONFIG_SYS_SCSI_MAX_LUN) | |
| #endif /* __CONFIG_BEAGLE_X5_H */ |