| /* | |
| * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> | |
| * | |
| * Based on sheevaplug.h originally written by | |
| * Prafulla Wadaskar <prafulla@marvell.com> | |
| * (C) Copyright 2009 | |
| * Marvell Semiconductor <www.marvell.com> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef _CONFIG_DOCKSTAR_H | |
| #define _CONFIG_DOCKSTAR_H | |
| #define CONFIG_SYS_GENERIC_BOARD | |
| /* | |
| * Version number information | |
| */ | |
| #define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" | |
| /* | |
| * High Level Configuration Options (easy to change) | |
| */ | |
| #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ | |
| #define CONFIG_KW88F6281 1 /* SOC Name */ | |
| #define CONFIG_MACH_DOCKSTAR /* Machine type */ | |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ | |
| /* | |
| * Commands configuration | |
| */ | |
| #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_CMD_ENV | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_CMD_NAND | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_CMD_USB | |
| /* | |
| * mv-common.h should be defined after CMD configs since it used them | |
| * to enable certain macros | |
| */ | |
| #include "mv-common.h" | |
| #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ | |
| #define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */ | |
| /* | |
| * Environment variables configurations | |
| */ | |
| #ifdef CONFIG_CMD_NAND | |
| #define CONFIG_ENV_IS_IN_NAND 1 | |
| #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ | |
| #else | |
| #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ | |
| #endif | |
| /* | |
| * max 4k env size is enough, but in case of nand | |
| * it has to be rounded to sector size | |
| */ | |
| #define CONFIG_ENV_SIZE 0x20000 /* 128k */ | |
| #define CONFIG_ENV_ADDR 0x60000 | |
| #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ | |
| /* | |
| * Default environment variables | |
| */ | |
| #define CONFIG_BOOTCOMMAND \ | |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ | |
| "ubi part root; " \ | |
| "ubifsmount ubi:root; " \ | |
| "ubifsload 0x800000 ${kernel}; " \ | |
| "ubifsload 0x1100000 ${initrd}; " \ | |
| "bootm 0x800000 0x1100000" | |
| #define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| "console=console=ttyS0,115200\0" \ | |
| "mtdids=nand0=orion_nand\0" \ | |
| "mtdparts="CONFIG_MTDPARTS \ | |
| "kernel=/boot/uImage\0" \ | |
| "initrd=/boot/uInitrd\0" \ | |
| "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" | |
| /* | |
| * Ethernet Driver configuration | |
| */ | |
| #ifdef CONFIG_CMD_NET | |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ | |
| #define CONFIG_PHY_BASE_ADR 0 | |
| #endif /* CONFIG_CMD_NET */ | |
| /* | |
| * File system | |
| */ | |
| #define CONFIG_CMD_EXT2 | |
| #define CONFIG_CMD_FAT | |
| #define CONFIG_CMD_JFFS2 | |
| #define CONFIG_CMD_UBI | |
| #define CONFIG_CMD_UBIFS | |
| #define CONFIG_RBTREE | |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ | |
| #define CONFIG_MTD_PARTITIONS | |
| #define CONFIG_CMD_MTDPARTS | |
| #define CONFIG_LZO | |
| #endif /* _CONFIG_DOCKSTAR_H */ |