| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * (C) Copyright 2000-2004 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| */ | |
| #ifndef _PART_H | |
| #define _PART_H | |
| #include <blk.h> | |
| #include <u-boot/uuid.h> | |
| #include <linux/errno.h> | |
| #include <linux/list.h> | |
| struct block_drvr { | |
| char *name; | |
| int (*select_hwpart)(int dev_num, int hwpart); | |
| }; | |
| #define LOG2(x) (((x & 0xaaaaaaaa) ? 1 : 0) + ((x & 0xcccccccc) ? 2 : 0) + \ | |
| ((x & 0xf0f0f0f0) ? 4 : 0) + ((x & 0xff00ff00) ? 8 : 0) + \ | |
| ((x & 0xffff0000) ? 16 : 0)) | |
| #define LOG2_INVALID(type) ((type)((sizeof(type)<<3)-1)) | |
| /* Part types */ | |
| #define PART_TYPE_UNKNOWN 0x00 | |
| #define PART_TYPE_MAC 0x01 | |
| #define PART_TYPE_DOS 0x02 | |
| #define PART_TYPE_ISO 0x03 | |
| #define PART_TYPE_AMIGA 0x04 | |
| #define PART_TYPE_EFI 0x05 | |
| #define PART_TYPE_MTD 0x06 | |
| #define PART_TYPE_UBI 0x07 | |
| /* maximum number of partition entries supported by search */ | |
| #define DOS_ENTRY_NUMBERS 8 | |
| #define ISO_ENTRY_NUMBERS 64 | |
| #define MAC_ENTRY_NUMBERS 64 | |
| #define AMIGA_ENTRY_NUMBERS 8 | |
| #define MTD_ENTRY_NUMBERS 64 | |
| #define UBI_ENTRY_NUMBERS UBI_MAX_VOLUMES | |
| /* | |
| * Type string for U-Boot bootable partitions | |
| */ | |
| #define BOOT_PART_TYPE "U-Boot" /* primary boot partition type */ | |
| #define BOOT_PART_COMP "PPCBoot" /* PPCBoot compatibility type */ | |
| /* device types */ | |
| #define DEV_TYPE_UNKNOWN 0xff /* not connected */ | |
| #define DEV_TYPE_HARDDISK 0x00 /* harddisk */ | |
| #define DEV_TYPE_TAPE 0x01 /* Tape */ | |
| #define DEV_TYPE_CDROM 0x05 /* CD-ROM */ | |
| #define DEV_TYPE_OPDISK 0x07 /* optical disk */ | |
| #define PART_NAME_LEN 32 | |
| #define PART_TYPE_LEN 32 | |
| #define MAX_SEARCH_PARTITIONS 128 | |
| #define PART_BOOTABLE ((int)BIT(0)) | |
| #define PART_EFI_SYSTEM_PARTITION ((int)BIT(1)) | |
| struct disk_partition { | |
| lbaint_t start; /* # of first block in partition */ | |
| lbaint_t size; /* number of blocks in partition */ | |
| ulong blksz; /* block size in bytes */ | |
| uchar name[PART_NAME_LEN]; /* partition name */ | |
| uchar type[PART_TYPE_LEN]; /* string type description */ | |
| /* | |
| * The bootable is a bitmask with the following fields: | |
| * | |
| * PART_BOOTABLE the MBR bootable flag is set | |
| * PART_EFI_SYSTEM_PARTITION the partition is an EFI system partition | |
| */ | |
| int bootable; | |
| u16 type_flags; /* top 16 bits of GPT partition attributes */ | |
| #if CONFIG_IS_ENABLED(PARTITION_UUIDS) | |
| char uuid[UUID_STR_LEN + 1]; /* filesystem UUID as string, if exists */ | |
| #endif | |
| #ifdef CONFIG_PARTITION_TYPE_GUID | |
| char type_guid[UUID_STR_LEN + 1]; /* type GUID as string, if exists */ | |
| #endif | |
| #ifdef CONFIG_DOS_PARTITION | |
| uchar sys_ind; /* partition type */ | |
| #endif | |
| }; | |
| /* Accessors for struct disk_partition field ->uuid */ | |
| extern char *__invalid_use_of_disk_partition_uuid; | |
| static inline const char *disk_partition_uuid(const struct disk_partition *info) | |
| { | |
| #if CONFIG_IS_ENABLED(PARTITION_UUIDS) | |
| return info->uuid; | |
| #else | |
| return __invalid_use_of_disk_partition_uuid; | |
| #endif | |
| } | |
| static inline void disk_partition_set_uuid(struct disk_partition *info, | |
| const char *val) | |
| { | |
| #if CONFIG_IS_ENABLED(PARTITION_UUIDS) | |
| strlcpy(info->uuid, val, UUID_STR_LEN + 1); | |
| #endif | |
| } | |
| static inline void disk_partition_clr_uuid(struct disk_partition *info) | |
| { | |
| #if CONFIG_IS_ENABLED(PARTITION_UUIDS) | |
| *info->uuid = '\0'; | |
| #endif | |
| } | |
| /* Accessors for struct disk_partition field ->type_guid */ | |
| extern char *__invalid_use_of_disk_partition_type_guid; | |
| /** | |
| * disk_partition_type_guid() - get partition type GUID | |
| * | |
| * By using this function to get the partition type GUID we can use | |
| * 'if (IS_ENABLED(CONFIG_PARTITION_TYPE_GUID))' instead of | |
| * '#ifdef CONFIG_PARTITION_TYPE_GUID'. | |
| * | |
| * @info: partition information | |
| * Return: partition type GUID | |
| */ | |
| static inline const | |
| char *disk_partition_type_guid(const struct disk_partition *info) | |
| { | |
| #ifdef CONFIG_PARTITION_TYPE_GUID | |
| return info->type_guid; | |
| #else | |
| return __invalid_use_of_disk_partition_type_guid; | |
| #endif | |
| } | |
| /** | |
| * disk_partition_set_type_guid() - set partition type GUID | |
| * | |
| * By using this function to set the partition type GUID we can use | |
| * 'if (IS_ENABLED(CONFIG_PARTITION_TYPE_GUID))' instead of | |
| * '#ifdef CONFIG_PARTITION_TYPE_GUID'. | |
| * | |
| * @info: partition information | |
| * @val: partition type GUID as string | |
| */ | |
| static inline void disk_partition_set_type_guid(struct disk_partition *info, | |
| const char *val) | |
| { | |
| #ifdef CONFIG_PARTITION_TYPE_GUID | |
| strlcpy(info->type_guid, val, UUID_STR_LEN + 1); | |
| #endif | |
| } | |
| static inline void disk_partition_clr_type_guid(struct disk_partition *info) | |
| { | |
| #ifdef CONFIG_PARTITION_TYPE_GUID | |
| *info->type_guid = '\0'; | |
| #endif | |
| } | |
| /* Accessors for struct disk_partition field ->sys_ind */ | |
| extern int __invalid_use_of_disk_partition_sys_ind; | |
| static inline uint disk_partition_sys_ind(const struct disk_partition *info) | |
| { | |
| #ifdef CONFIG_DOS_PARTITION | |
| return info->sys_ind; | |
| #else | |
| return __invalid_use_of_disk_partition_sys_ind; | |
| #endif | |
| } | |
| struct disk_part { | |
| int partnum; | |
| struct disk_partition gpt_part_info; | |
| struct list_head list; | |
| }; | |
| /* Misc _get_dev functions */ | |
| #if CONFIG_IS_ENABLED(PARTITIONS) | |
| /** | |
| * blk_get_dev() - get a pointer to a block device given its type and number | |
| * | |
| * Each interface allocates its own devices and typically struct blk_desc is | |
| * contained with the interface's data structure. There is no global | |
| * numbering for block devices, so the interface name must be provided. | |
| * | |
| * @ifname: Interface name (e.g. "ide", "scsi") | |
| * @dev: Device number (0 for first device on that interface, 1 for | |
| * second, etc. | |
| * Return: | |
| * pointer to the block device, or NULL if not available, or an error occurred. | |
| */ | |
| struct blk_desc *blk_get_dev(const char *ifname, int dev); | |
| struct blk_desc *mg_disk_get_dev(int dev); | |
| /** | |
| * part_get_info_by_type() - Get partitions from a block device using a specific | |
| * partition driver | |
| * | |
| * Each interface allocates its own devices and typically struct blk_desc is | |
| * contained with the interface's data structure. There is no global | |
| * numbering for block devices, so the interface name must be provided. | |
| * | |
| * @desc: Block device descriptor | |
| * @part: Partition number to read | |
| * @part_type: Partition driver to use, or PART_TYPE_UNKNOWN to automatically | |
| * choose a driver | |
| * @info: Returned partition information | |
| * | |
| * Return: 0 on success, negative errno on failure | |
| */ | |
| int part_get_info_by_type(struct blk_desc *desc, int part, int part_type, | |
| struct disk_partition *info); | |
| int part_get_info(struct blk_desc *desc, int part, | |
| struct disk_partition *info); | |
| /** | |
| * part_get_info_whole_disk() - get partition info for the special case of | |
| * a partition occupying the entire disk. | |
| * | |
| * @desc: block device descriptor | |
| * @info: returned partition information | |
| * Return: 0 on success | |
| */ | |
| int part_get_info_whole_disk(struct blk_desc *desc, | |
| struct disk_partition *info); | |
| void part_print(struct blk_desc *desc); | |
| void part_init(struct blk_desc *desc); | |
| void dev_print(struct blk_desc *desc); | |
| /** | |
| * blk_get_device_by_str() - Get a block device given its interface/hw partition | |
| * | |
| * Each interface allocates its own devices and typically struct blk_desc is | |
| * contained with the interface's data structure. There is no global | |
| * numbering for block devices, so the interface name must be provided. | |
| * | |
| * The hardware parition is not related to the normal software partitioning | |
| * of a device - each hardware partition is effectively a separately | |
| * accessible block device. When a hardware parition is selected on MMC the | |
| * other hardware partitions become inaccessible. The same block device is | |
| * used to access all hardware partitions, but its capacity may change when a | |
| * different hardware partition is selected. | |
| * | |
| * When a hardware partition number is given, the block device switches to | |
| * that hardware partition. | |
| * | |
| * @ifname: Interface name (e.g. "ide", "scsi") | |
| * @dev_str: Device and optional hw partition. This can either be a string | |
| * containing the device number (e.g. "2") or the device number | |
| * and hardware partition number (e.g. "2.4") for devices that | |
| * support it (currently only MMC). | |
| * @desc: Returns a pointer to the block device on success | |
| * Return: block device number (local to the interface), or -1 on error | |
| */ | |
| int blk_get_device_by_str(const char *ifname, const char *dev_str, | |
| struct blk_desc **desc); | |
| /** | |
| * blk_get_device_part_str() - Get a block device and partition | |
| * | |
| * This calls blk_get_device_by_str() to look up a device. It also looks up | |
| * a partition and returns information about it. | |
| * | |
| * @dev_part_str is in the format <dev>.<hw_part>:<part> where | |
| * | |
| * * <dev> is the device number, | |
| * | |
| * * <hw_part> is the optional hardware partition number and | |
| * | |
| * * <part> is the partition number. | |
| * | |
| * If @ifname is "hostfs", then this function returns the sandbox host block | |
| * device. | |
| * | |
| * If @ifname is "ubi", then this function returns 0, with @info set to a | |
| * special UBI device. | |
| * | |
| * If @dev_part_str is NULL or empty or "-", then this function looks up | |
| * the "bootdevice" environment variable and uses that string instead. | |
| * | |
| * If the partition string is empty then the first partition is used. If the | |
| * partition string is "auto" then the first bootable partition is used. | |
| * | |
| * @ifname: Interface name (e.g. "ide", "scsi") | |
| * @dev_part_str: Device and partition string | |
| * @desc: Returns a pointer to the block device on success | |
| * @info: Returns partition information | |
| * @allow_whole_dev: true to allow the user to select partition 0 | |
| * (which means the whole device), false to require a valid | |
| * partition number >= 1 | |
| * Return: partition number, or -1 on error | |
| * | |
| */ | |
| int blk_get_device_part_str(const char *ifname, const char *dev_part_str, | |
| struct blk_desc **desc, | |
| struct disk_partition *info, int allow_whole_dev); | |
| /** | |
| * part_get_info_by_name() - Search for a partition by name | |
| * among all available registered partitions | |
| * | |
| * @desc: block device descriptor | |
| * @name: the specified table entry name | |
| * @info: returns the disk partition info | |
| * | |
| * Return: the partition number on match (starting on 1), -1 on no match, | |
| * otherwise error | |
| */ | |
| int part_get_info_by_name(struct blk_desc *desc, const char *name, | |
| struct disk_partition *info); | |
| /** | |
| * part_get_info_by_uuid() - Search for a partition by uuid | |
| * among all available registered partitions | |
| * | |
| * @desc: block device descriptor | |
| * @uuid: the specified table entry uuid | |
| * @info: the disk partition info | |
| * | |
| * Return: the partition number on match (starting on 1), -ENOENT on no match, | |
| * otherwise error | |
| */ | |
| int part_get_info_by_uuid(struct blk_desc *desc, const char *uuid, | |
| struct disk_partition *info); | |
| /** | |
| * part_get_info_by_dev_and_name_or_num() - Get partition info from dev number | |
| * and part name, or dev number and | |
| * part number. | |
| * | |
| * Parse a device number and partition description (either name or number) | |
| * in the form of device number plus partition name separated by a "#" | |
| * (like "device_num#partition_name") or a device number plus a partition number | |
| * separated by a ":". For example both "0#misc" and "0:1" can be valid | |
| * partition descriptions for a given interface. If the partition is found, sets | |
| * desc and part_info accordingly with the information of the partition. | |
| * | |
| * @dev_iface: Device interface | |
| * @dev_part_str: Input partition description, like "0#misc" or "0:1" | |
| * @desc: Place to store the device description pointer | |
| * @part_info: Place to store the partition information | |
| * @allow_whole_dev: true to allow the user to select partition 0 | |
| * (which means the whole device), false to require a valid | |
| * partition number >= 1 | |
| * Return: the partition number on success, or negative errno on error | |
| */ | |
| int part_get_info_by_dev_and_name_or_num(const char *dev_iface, | |
| const char *dev_part_str, | |
| struct blk_desc **desc, | |
| struct disk_partition *part_info, | |
| int allow_whole_dev); | |
| /** | |
| * part_set_generic_name() - create generic partition like hda1 or sdb2 | |
| * | |
| * Helper function for partition tables, which don't hold partition names | |
| * (DOS, ISO). Generates partition name out of the device type and partition | |
| * number. | |
| * | |
| * @desc: pointer to the block device | |
| * @part_num: partition number for which the name is generated | |
| * @name: buffer where the name is written | |
| */ | |
| void part_set_generic_name(const struct blk_desc *desc, int part_num, | |
| char *name); | |
| extern const struct block_drvr block_drvr[]; | |
| #else | |
| static inline struct blk_desc *blk_get_dev(const char *ifname, int dev) | |
| { return NULL; } | |
| static inline struct blk_desc *mg_disk_get_dev(int dev) { return NULL; } | |
| static inline int part_get_info(struct blk_desc *desc, int part, | |
| struct disk_partition *info) { return -1; } | |
| static inline int part_get_info_whole_disk(struct blk_desc *desc, | |
| struct disk_partition *info) | |
| { return -1; } | |
| static inline void part_print(struct blk_desc *desc) {} | |
| static inline void part_init(struct blk_desc *desc) {} | |
| static inline void dev_print(struct blk_desc *desc) {} | |
| static inline int blk_get_device_by_str(const char *ifname, const char *dev_str, | |
| struct blk_desc **desc) | |
| { return -1; } | |
| static inline int blk_get_device_part_str(const char *ifname, | |
| const char *dev_part_str, | |
| struct blk_desc **desc, | |
| struct disk_partition *info, | |
| int allow_whole_dev) | |
| { *desc = NULL; return -1; } | |
| static inline int part_get_info_by_name(struct blk_desc *desc, const char *name, | |
| struct disk_partition *info) | |
| { | |
| return -ENOENT; | |
| } | |
| static inline int part_get_info_by_uuid(struct blk_desc *desc, const char *uuid, | |
| struct disk_partition *info) | |
| { | |
| return -ENOENT; | |
| } | |
| static inline int | |
| part_get_info_by_dev_and_name_or_num(const char *dev_iface, | |
| const char *dev_part_str, | |
| struct blk_desc **desc, | |
| struct disk_partition *part_info, | |
| int allow_whole_dev) | |
| { | |
| *desc = NULL; | |
| return -ENOSYS; | |
| } | |
| #endif | |
| struct udevice; | |
| /** | |
| * disk_blk_read() - read blocks from a disk partition | |
| * | |
| * @dev: Device to read from (UCLASS_PARTITION) | |
| * @start: Start block number to read in the partition (0=first) | |
| * @blkcnt: Number of blocks to read | |
| * @buffer: Destination buffer for data read | |
| * Return: number of blocks read, or -ve error number (see the | |
| * IS_ERR_VALUE() macro | |
| */ | |
| ulong disk_blk_read(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, | |
| void *buffer); | |
| /** | |
| * disk_blk_write() - write to a disk partition | |
| * | |
| * @dev: Device to write to (UCLASS_PARTITION) | |
| * @start: Start block number to write in the partition (0=first) | |
| * @blkcnt: Number of blocks to write | |
| * @buffer: Source buffer for data to write | |
| * Return: number of blocks written, or -ve error number (see the | |
| * IS_ERR_VALUE() macro | |
| */ | |
| ulong disk_blk_write(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, | |
| const void *buffer); | |
| /** | |
| * disk_blk_erase() - erase a section of a disk partition | |
| * | |
| * @dev: Device to (partially) erase (UCLASS_PARTITION) | |
| * @start: Start block number to erase in the partition (0=first) | |
| * @blkcnt: Number of blocks to erase | |
| * Return: number of blocks erased, or -ve error number (see the | |
| * IS_ERR_VALUE() macro | |
| */ | |
| ulong disk_blk_erase(struct udevice *dev, lbaint_t start, lbaint_t blkcnt); | |
| /* | |
| * We don't support printing partition information in SPL and only support | |
| * getting partition information in a few cases. | |
| */ | |
| #ifdef CONFIG_XPL_BUILD | |
| # define part_print_ptr(x) NULL | |
| # if defined(CONFIG_SPL_FS_EXT4) || defined(CONFIG_SPL_FS_FAT) || \ | |
| defined(CONFIG_SPL_FS_SQUASHFS) || \ | |
| defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION) || \ | |
| defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE) | |
| # define part_get_info_ptr(x) x | |
| # else | |
| # define part_get_info_ptr(x) NULL | |
| # endif | |
| #else | |
| #define part_print_ptr(x) x | |
| #define part_get_info_ptr(x) x | |
| #endif | |
| /** | |
| * struct part_driver - partition driver | |
| */ | |
| struct part_driver { | |
| /** @name: partition name */ | |
| const char *name; | |
| /** @part_type: (MBR) partition type */ | |
| int part_type; | |
| /** @max_entries: maximum number of partition table entries */ | |
| const int max_entries; | |
| /** | |
| * @get_info: Get information about a partition | |
| * | |
| * @get_info.desc: Block device descriptor | |
| * @get_info.part: Partition number (1 = first) | |
| * @get_info.info: Returns partition information | |
| */ | |
| int (*get_info)(struct blk_desc *desc, int part, | |
| struct disk_partition *info); | |
| /** | |
| * @print: Print partition information | |
| * | |
| * @print.desc: Block device descriptor | |
| */ | |
| void (*print)(struct blk_desc *desc); | |
| /** | |
| * @test: Test if a device contains this partition type | |
| * | |
| * @test.desc: Block device descriptor | |
| * @test.Return: | |
| * 0 if the block device appears to contain this partition type, | |
| * -ve if not | |
| */ | |
| int (*test)(struct blk_desc *desc); | |
| }; | |
| /** | |
| * part_driver_get_info() - Call the part_driver's get_info method | |
| * | |
| * On success, string members of info are guaranteed to be properly | |
| * initialized, though they may be empty. | |
| * | |
| * @drv: Partition driver | |
| * @desc: Block device descriptor | |
| * @part: Partition number to read | |
| * @info: Returned partition information | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int part_driver_get_info(struct part_driver *drv, struct blk_desc *desc, int part, | |
| struct disk_partition *info); | |
| /* Declare a new U-Boot partition 'driver' */ | |
| #define U_BOOT_PART_TYPE(__name) \ | |
| ll_entry_declare(struct part_driver, __name, part_driver) | |
| #include <part_efi.h> | |
| #if CONFIG_IS_ENABLED(EFI_PARTITION) | |
| /* disk/part_efi.c */ | |
| /** | |
| * write_gpt_table() - Write the GUID Partition Table to disk | |
| * | |
| * @desc: block device descriptor | |
| * @gpt_h: pointer to GPT header representation | |
| * @gpt_e: pointer to GPT partition table entries | |
| * | |
| * Return: zero on success, otherwise error | |
| */ | |
| int write_gpt_table(struct blk_desc *desc, gpt_header *gpt_h, gpt_entry *gpt_e); | |
| /** | |
| * gpt_fill_pte() - Fill the GPT partition table entry | |
| * | |
| * @desc: block device descriptor | |
| * @gpt_h: GPT header representation | |
| * @gpt_e: GPT partition table entries | |
| * @partitions: list of partitions | |
| * @parts: number of partitions | |
| * | |
| * Return: zero on success | |
| */ | |
| int gpt_fill_pte(struct blk_desc *desc, gpt_header *gpt_h, gpt_entry *gpt_e, | |
| struct disk_partition *partitions, int parts); | |
| /** | |
| * gpt_fill_header() - Fill the GPT header | |
| * | |
| * @desc: block device descriptor | |
| * @gpt_h: GPT header representation | |
| * @str_guid: disk guid string representation | |
| * @parts_count: number of partitions | |
| * | |
| * Return: error on str_guid conversion error | |
| */ | |
| int gpt_fill_header(struct blk_desc *desc, gpt_header *gpt_h, char *str_guid, | |
| int parts_count); | |
| /** | |
| * gpt_restore() - Restore GPT partition table | |
| * | |
| * @desc: block device descriptor | |
| * @str_disk_guid: disk GUID | |
| * @partitions: list of partitions | |
| * @parts_count: number of partitions | |
| * | |
| * Return: 0 on success | |
| */ | |
| int gpt_restore(struct blk_desc *desc, char *str_disk_guid, | |
| struct disk_partition *partitions, const int parts_count); | |
| /** | |
| * is_valid_gpt_buf() - Ensure that the Primary GPT information is valid | |
| * | |
| * @desc: block device descriptor | |
| * @buf: buffer which contains the MBR and Primary GPT info | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int is_valid_gpt_buf(struct blk_desc *desc, void *buf); | |
| /** | |
| * write_mbr_and_gpt_partitions() - write MBR, Primary GPT and Backup GPT | |
| * | |
| * @desc: block device descriptor | |
| * @buf: buffer which contains the MBR and Primary GPT info | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int write_mbr_and_gpt_partitions(struct blk_desc *desc, void *buf); | |
| /** | |
| * gpt_verify_headers() - Read and check CRC32 of the GPT's header | |
| * and partition table entries (PTE) | |
| * | |
| * As a side effect if sets gpt_head and gpt_pte so they point to GPT data. | |
| * | |
| * @desc: block device descriptor | |
| * @gpt_head: pointer to GPT header data read from medium | |
| * @gpt_pte: pointer to GPT partition table enties read from medium | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int gpt_verify_headers(struct blk_desc *desc, gpt_header *gpt_head, | |
| gpt_entry **gpt_pte); | |
| /** | |
| * gpt_repair_headers() - Function to repair the GPT's header | |
| * and partition table entries (PTE) | |
| * | |
| * @desc: block device descriptor | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int gpt_repair_headers(struct blk_desc *desc); | |
| /** | |
| * gpt_verify_partitions() - Function to check if partitions' name, start and | |
| * size correspond to '$partitions' env variable | |
| * | |
| * This function checks if on medium stored GPT data is in sync with information | |
| * provided in '$partitions' environment variable. Specificially, name, start | |
| * and size of the partition is checked. | |
| * | |
| * @desc: block device descriptor | |
| * @partitions: partition data read from '$partitions' env variable | |
| * @parts: number of partitions read from '$partitions' env variable | |
| * @gpt_head: pointer to GPT header data read from medium | |
| * @gpt_pte: pointer to GPT partition table enties read from medium | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int gpt_verify_partitions(struct blk_desc *desc, | |
| struct disk_partition *partitions, int parts, | |
| gpt_header *gpt_head, gpt_entry **gpt_pte); | |
| /** | |
| * get_disk_guid() - Read the GUID string from a device's GPT | |
| * | |
| * This function reads the GUID string from a block device whose descriptor | |
| * is provided. | |
| * | |
| * @desc: block device descriptor | |
| * @guid: pre-allocated string in which to return the GUID | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int get_disk_guid(struct blk_desc *desc, char *guid); | |
| /** | |
| * part_get_gpt_pte() - Get the GPT partition table entry of a partition | |
| * | |
| * This function reads the GPT partition table entry (PTE) for a given | |
| * block device and partition number. | |
| * | |
| * @desc: block device descriptor | |
| * @part: partition number for which to return the PTE | |
| * @gpt_e: GPT partition table entry | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int part_get_gpt_pte(struct blk_desc *desc, int part, gpt_entry *gpt_e); | |
| #endif | |
| #if CONFIG_IS_ENABLED(DOS_PARTITION) | |
| /** | |
| * is_valid_dos_buf() - Ensure that a DOS MBR image is valid | |
| * | |
| * @buf: buffer which contains the MBR | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int is_valid_dos_buf(void *buf); | |
| /** | |
| * write_mbr_sector() - write DOS MBR | |
| * | |
| * @desc: block device descriptor | |
| * @buf: buffer which contains the MBR | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int write_mbr_sector(struct blk_desc *desc, void *buf); | |
| int write_mbr_partitions(struct blk_desc *dev, | |
| struct disk_partition *p, int count, unsigned int disksig); | |
| int layout_mbr_partitions(struct disk_partition *p, int count, | |
| lbaint_t total_sectors); | |
| /** | |
| * part_get_mbr() - get the MBR partition record of a partition | |
| * | |
| * This function reads the MBR partition record for a given block | |
| * device and partition number. | |
| * | |
| * @desc: block device descriptor | |
| * @part: partition number for which to return the partition record | |
| * @mbr: MBR partition record | |
| * | |
| * Return: 0 on success, otherwise error | |
| */ | |
| int part_get_mbr(struct blk_desc *desc, int part, dos_partition_t *mbr); | |
| #endif | |
| #if CONFIG_IS_ENABLED(PARTITIONS) | |
| /** | |
| * part_driver_get_count() - get partition driver count | |
| * | |
| * Return: number of partition drivers | |
| */ | |
| static inline int part_driver_get_count(void) | |
| { | |
| return ll_entry_count(struct part_driver, part_driver); | |
| } | |
| /** | |
| * part_driver_get_first() - get first partition driver | |
| * | |
| * Return: pointer to first partition driver on success, otherwise NULL | |
| */ | |
| static inline struct part_driver *part_driver_get_first(void) | |
| { | |
| return ll_entry_start(struct part_driver, part_driver); | |
| } | |
| /** | |
| * part_get_type_by_name() - Get partition type by name | |
| * | |
| * @name: Name of partition type to look up (not case-sensitive) | |
| * Return: | |
| * Corresponding partition type (PART\_TYPE\_...) or PART\_TYPE\_UNKNOWN | |
| */ | |
| int part_get_type_by_name(const char *name); | |
| /** | |
| * part_get_bootable() - Find the first bootable partition | |
| * | |
| * @desc: Block-device descriptor | |
| * Return: first bootable partition, or 0 if there is none | |
| */ | |
| int part_get_bootable(struct blk_desc *desc); | |
| /** | |
| * part_driver_lookup_type() - Look up the partition driver for a blk device | |
| * | |
| * If @desc->part_type is PART_TYPE_UNKNOWN, this checks each partition driver | |
| * against the blk device to see if there is a valid partition table acceptable | |
| * to that driver. | |
| * | |
| * If @desc->part_type is already set, it just returns the driver for that | |
| * type, without testing if the driver can find a valid partition on the | |
| * descriptor. | |
| * | |
| * On success it updates @desc->part_type if set to PART_TYPE_UNKNOWN on entry | |
| * | |
| * @desc: Device descriptor | |
| * Return: Driver found, or NULL if none | |
| */ | |
| struct part_driver *part_driver_lookup_type(struct blk_desc *desc); | |
| #else | |
| static inline int part_driver_get_count(void) | |
| { return 0; } | |
| static inline struct part_driver *part_driver_get_first(void) | |
| { return NULL; } | |
| static inline bool part_get_bootable(struct blk_desc *desc) | |
| { return false; } | |
| static inline struct part_driver *part_driver_lookup_type(struct blk_desc *desc) | |
| { return NULL; } | |
| #endif /* CONFIG_PARTITIONS */ | |
| #endif /* _PART_H */ |