| /* | |
| * Copyright (c) 2011 The Chromium OS Authors. | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef USE_HOSTCC | |
| #include <common.h> | |
| #include <boot_fit.h> | |
| #include <dm.h> | |
| #include <dm/of_extra.h> | |
| #include <errno.h> | |
| #include <fdtdec.h> | |
| #include <fdt_support.h> | |
| #include <libfdt.h> | |
| #include <serial.h> | |
| #include <asm/sections.h> | |
| #include <linux/ctype.h> | |
| #include <linux/lzo.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /* | |
| * Here are the type we know about. One day we might allow drivers to | |
| * register. For now we just put them here. The COMPAT macro allows us to | |
| * turn this into a sparse list later, and keeps the ID with the name. | |
| * | |
| * NOTE: This list is basically a TODO list for things that need to be | |
| * converted to driver model. So don't add new things here unless there is a | |
| * good reason why driver-model conversion is infeasible. Examples include | |
| * things which are used before driver model is available. | |
| */ | |
| #define COMPAT(id, name) name | |
| static const char * const compat_names[COMPAT_COUNT] = { | |
| COMPAT(UNKNOWN, "<none>"), | |
| COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"), | |
| COMPAT(NVIDIA_TEGRA20_EMC_TABLE, "nvidia,tegra20-emc-table"), | |
| COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), | |
| COMPAT(NVIDIA_TEGRA124_XUSB_PADCTL, "nvidia,tegra124-xusb-padctl"), | |
| COMPAT(NVIDIA_TEGRA210_XUSB_PADCTL, "nvidia,tegra210-xusb-padctl"), | |
| COMPAT(SMSC_LAN9215, "smsc,lan9215"), | |
| COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"), | |
| COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"), | |
| COMPAT(SAMSUNG_EXYNOS5_SOUND, "samsung,exynos-sound"), | |
| COMPAT(WOLFSON_WM8994_CODEC, "wolfson,wm8994-codec"), | |
| COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"), | |
| COMPAT(SAMSUNG_EXYNOS5_USB3_PHY, "samsung,exynos5250-usb3-phy"), | |
| COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"), | |
| COMPAT(SAMSUNG_EXYNOS_MIPI_DSI, "samsung,exynos-mipi-dsi"), | |
| COMPAT(SAMSUNG_EXYNOS_DWMMC, "samsung,exynos-dwmmc"), | |
| COMPAT(SAMSUNG_EXYNOS_MMC, "samsung,exynos-mmc"), | |
| COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686"), | |
| COMPAT(GENERIC_SPI_FLASH, "spi-flash"), | |
| COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"), | |
| COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"), | |
| COMPAT(SAMSUNG_EXYNOS_SYSMMU, "samsung,sysmmu-v3.3"), | |
| COMPAT(INTEL_MICROCODE, "intel,microcode"), | |
| COMPAT(AMS_AS3722, "ams,as3722"), | |
| COMPAT(INTEL_QRK_MRC, "intel,quark-mrc"), | |
| COMPAT(ALTERA_SOCFPGA_DWMAC, "altr,socfpga-stmmac"), | |
| COMPAT(ALTERA_SOCFPGA_DWMMC, "altr,socfpga-dw-mshc"), | |
| COMPAT(ALTERA_SOCFPGA_DWC2USB, "snps,dwc2"), | |
| COMPAT(INTEL_BAYTRAIL_FSP, "intel,baytrail-fsp"), | |
| COMPAT(INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"), | |
| COMPAT(INTEL_IVYBRIDGE_FSP, "intel,ivybridge-fsp"), | |
| COMPAT(COMPAT_SUNXI_NAND, "allwinner,sun4i-a10-nand"), | |
| COMPAT(ALTERA_SOCFPGA_CLK, "altr,clk-mgr"), | |
| COMPAT(ALTERA_SOCFPGA_PINCTRL_SINGLE, "pinctrl-single"), | |
| COMPAT(ALTERA_SOCFPGA_H2F_BRG, "altr,socfpga-hps2fpga-bridge"), | |
| COMPAT(ALTERA_SOCFPGA_LWH2F_BRG, "altr,socfpga-lwhps2fpga-bridge"), | |
| COMPAT(ALTERA_SOCFPGA_F2H_BRG, "altr,socfpga-fpga2hps-bridge"), | |
| COMPAT(ALTERA_SOCFPGA_F2SDR0, "altr,socfpga-fpga2sdram0-bridge"), | |
| COMPAT(ALTERA_SOCFPGA_F2SDR1, "altr,socfpga-fpga2sdram1-bridge"), | |
| COMPAT(ALTERA_SOCFPGA_F2SDR2, "altr,socfpga-fpga2sdram2-bridge"), | |
| COMPAT(ALTERA_SOCFPGA_FPGA0, "altr,socfpga-a10-fpga-mgr"), | |
| COMPAT(ALTERA_SOCFPGA_NOC, "altr,socfpga-a10-noc"), | |
| }; | |
| const char *fdtdec_get_compatible(enum fdt_compat_id id) | |
| { | |
| /* We allow reading of the 'unknown' ID for testing purposes */ | |
| assert(id >= 0 && id < COMPAT_COUNT); | |
| return compat_names[id]; | |
| } | |
| fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node, | |
| const char *prop_name, int index, int na, int ns, | |
| fdt_size_t *sizep, bool translate) | |
| { | |
| const fdt32_t *prop, *prop_end; | |
| const fdt32_t *prop_addr, *prop_size, *prop_after_size; | |
| int len; | |
| fdt_addr_t addr; | |
| debug("%s: %s: ", __func__, prop_name); | |
| if (na > (sizeof(fdt_addr_t) / sizeof(fdt32_t))) { | |
| debug("(na too large for fdt_addr_t type)\n"); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| if (ns > (sizeof(fdt_size_t) / sizeof(fdt32_t))) { | |
| debug("(ns too large for fdt_size_t type)\n"); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| prop = fdt_getprop(blob, node, prop_name, &len); | |
| if (!prop) { | |
| debug("(not found)\n"); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| prop_end = prop + (len / sizeof(*prop)); | |
| prop_addr = prop + (index * (na + ns)); | |
| prop_size = prop_addr + na; | |
| prop_after_size = prop_size + ns; | |
| if (prop_after_size > prop_end) { | |
| debug("(not enough data: expected >= %d cells, got %d cells)\n", | |
| (u32)(prop_after_size - prop), ((u32)(prop_end - prop))); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| #if CONFIG_IS_ENABLED(OF_TRANSLATE) | |
| if (translate) | |
| addr = fdt_translate_address(blob, node, prop_addr); | |
| else | |
| #endif | |
| addr = fdtdec_get_number(prop_addr, na); | |
| if (sizep) { | |
| *sizep = fdtdec_get_number(prop_size, ns); | |
| debug("addr=%08llx, size=%llx\n", (unsigned long long)addr, | |
| (unsigned long long)*sizep); | |
| } else { | |
| debug("addr=%08llx\n", (unsigned long long)addr); | |
| } | |
| return addr; | |
| } | |
| fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent, | |
| int node, const char *prop_name, int index, fdt_size_t *sizep, | |
| bool translate) | |
| { | |
| int na, ns; | |
| debug("%s: ", __func__); | |
| na = fdt_address_cells(blob, parent); | |
| if (na < 1) { | |
| debug("(bad #address-cells)\n"); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| ns = fdt_size_cells(blob, parent); | |
| if (ns < 0) { | |
| debug("(bad #size-cells)\n"); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| debug("na=%d, ns=%d, ", na, ns); | |
| return fdtdec_get_addr_size_fixed(blob, node, prop_name, index, na, | |
| ns, sizep, translate); | |
| } | |
| fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node, | |
| const char *prop_name, int index, fdt_size_t *sizep, | |
| bool translate) | |
| { | |
| int parent; | |
| debug("%s: ", __func__); | |
| parent = fdt_parent_offset(blob, node); | |
| if (parent < 0) { | |
| debug("(no parent found)\n"); | |
| return FDT_ADDR_T_NONE; | |
| } | |
| return fdtdec_get_addr_size_auto_parent(blob, parent, node, prop_name, | |
| index, sizep, translate); | |
| } | |
| fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, | |
| const char *prop_name, fdt_size_t *sizep) | |
| { | |
| int ns = sizep ? (sizeof(fdt_size_t) / sizeof(fdt32_t)) : 0; | |
| return fdtdec_get_addr_size_fixed(blob, node, prop_name, 0, | |
| sizeof(fdt_addr_t) / sizeof(fdt32_t), | |
| ns, sizep, false); | |
| } | |
| fdt_addr_t fdtdec_get_addr(const void *blob, int node, | |
| const char *prop_name) | |
| { | |
| return fdtdec_get_addr_size(blob, node, prop_name, NULL); | |
| } | |
| #if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) | |
| int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type, | |
| const char *prop_name, struct fdt_pci_addr *addr) | |
| { | |
| const u32 *cell; | |
| int len; | |
| int ret = -ENOENT; | |
| debug("%s: %s: ", __func__, prop_name); | |
| /* | |
| * If we follow the pci bus bindings strictly, we should check | |
| * the value of the node's parent node's #address-cells and | |
| * #size-cells. They need to be 3 and 2 accordingly. However, | |
| * for simplicity we skip the check here. | |
| */ | |
| cell = fdt_getprop(blob, node, prop_name, &len); | |
| if (!cell) | |
| goto fail; | |
| if ((len % FDT_PCI_REG_SIZE) == 0) { | |
| int num = len / FDT_PCI_REG_SIZE; | |
| int i; | |
| for (i = 0; i < num; i++) { | |
| debug("pci address #%d: %08lx %08lx %08lx\n", i, | |
| (ulong)fdt32_to_cpu(cell[0]), | |
| (ulong)fdt32_to_cpu(cell[1]), | |
| (ulong)fdt32_to_cpu(cell[2])); | |
| if ((fdt32_to_cpu(*cell) & type) == type) { | |
| addr->phys_hi = fdt32_to_cpu(cell[0]); | |
| addr->phys_mid = fdt32_to_cpu(cell[1]); | |
| addr->phys_lo = fdt32_to_cpu(cell[1]); | |
| break; | |
| } else { | |
| cell += (FDT_PCI_ADDR_CELLS + | |
| FDT_PCI_SIZE_CELLS); | |
| } | |
| } | |
| if (i == num) { | |
| ret = -ENXIO; | |
| goto fail; | |
| } | |
| return 0; | |
| } else { | |
| ret = -EINVAL; | |
| } | |
| fail: | |
| debug("(not found)\n"); | |
| return ret; | |
| } | |
| int fdtdec_get_pci_vendev(const void *blob, int node, u16 *vendor, u16 *device) | |
| { | |
| const char *list, *end; | |
| int len; | |
| list = fdt_getprop(blob, node, "compatible", &len); | |
| if (!list) | |
| return -ENOENT; | |
| end = list + len; | |
| while (list < end) { | |
| char *s; | |
| len = strlen(list); | |
| if (len >= strlen("pciVVVV,DDDD")) { | |
| s = strstr(list, "pci"); | |
| /* | |
| * check if the string is something like pciVVVV,DDDD.RR | |
| * or just pciVVVV,DDDD | |
| */ | |
| if (s && s[7] == ',' && | |
| (s[12] == '.' || s[12] == 0)) { | |
| s += 3; | |
| *vendor = simple_strtol(s, NULL, 16); | |
| s += 5; | |
| *device = simple_strtol(s, NULL, 16); | |
| return 0; | |
| } | |
| } | |
| list += (len + 1); | |
| } | |
| return -ENOENT; | |
| } | |
| int fdtdec_get_pci_bar32(struct udevice *dev, struct fdt_pci_addr *addr, | |
| u32 *bar) | |
| { | |
| int barnum; | |
| /* extract the bar number from fdt_pci_addr */ | |
| barnum = addr->phys_hi & 0xff; | |
| if ((barnum < PCI_BASE_ADDRESS_0) || (barnum > PCI_CARDBUS_CIS)) | |
| return -EINVAL; | |
| barnum = (barnum - PCI_BASE_ADDRESS_0) / 4; | |
| *bar = dm_pci_read_bar32(dev, barnum); | |
| return 0; | |
| } | |
| #endif | |
| uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name, | |
| uint64_t default_val) | |
| { | |
| const uint64_t *cell64; | |
| int length; | |
| cell64 = fdt_getprop(blob, node, prop_name, &length); | |
| if (!cell64 || length < sizeof(*cell64)) | |
| return default_val; | |
| return fdt64_to_cpu(*cell64); | |
| } | |
| int fdtdec_get_is_enabled(const void *blob, int node) | |
| { | |
| const char *cell; | |
| /* | |
| * It should say "okay", so only allow that. Some fdts use "ok" but | |
| * this is a bug. Please fix your device tree source file. See here | |
| * for discussion: | |
| * | |
| * http://www.mail-archive.com/u-boot@lists.denx.de/msg71598.html | |
| */ | |
| cell = fdt_getprop(blob, node, "status", NULL); | |
| if (cell) | |
| return 0 == strcmp(cell, "okay"); | |
| return 1; | |
| } | |
| enum fdt_compat_id fdtdec_lookup(const void *blob, int node) | |
| { | |
| enum fdt_compat_id id; | |
| /* Search our drivers */ | |
| for (id = COMPAT_UNKNOWN; id < COMPAT_COUNT; id++) | |
| if (0 == fdt_node_check_compatible(blob, node, | |
| compat_names[id])) | |
| return id; | |
| return COMPAT_UNKNOWN; | |
| } | |
| int fdtdec_next_compatible(const void *blob, int node, | |
| enum fdt_compat_id id) | |
| { | |
| return fdt_node_offset_by_compatible(blob, node, compat_names[id]); | |
| } | |
| int fdtdec_next_compatible_subnode(const void *blob, int node, | |
| enum fdt_compat_id id, int *depthp) | |
| { | |
| do { | |
| node = fdt_next_node(blob, node, depthp); | |
| } while (*depthp > 1); | |
| /* If this is a direct subnode, and compatible, return it */ | |
| if (*depthp == 1 && 0 == fdt_node_check_compatible( | |
| blob, node, compat_names[id])) | |
| return node; | |
| return -FDT_ERR_NOTFOUND; | |
| } | |
| int fdtdec_next_alias(const void *blob, const char *name, | |
| enum fdt_compat_id id, int *upto) | |
| { | |
| #define MAX_STR_LEN 20 | |
| char str[MAX_STR_LEN + 20]; | |
| int node, err; | |
| /* snprintf() is not available */ | |
| assert(strlen(name) < MAX_STR_LEN); | |
| sprintf(str, "%.*s%d", MAX_STR_LEN, name, *upto); | |
| node = fdt_path_offset(blob, str); | |
| if (node < 0) | |
| return node; | |
| err = fdt_node_check_compatible(blob, node, compat_names[id]); | |
| if (err < 0) | |
| return err; | |
| if (err) | |
| return -FDT_ERR_NOTFOUND; | |
| (*upto)++; | |
| return node; | |
| } | |
| int fdtdec_find_aliases_for_id(const void *blob, const char *name, | |
| enum fdt_compat_id id, int *node_list, int maxcount) | |
| { | |
| memset(node_list, '\0', sizeof(*node_list) * maxcount); | |
| return fdtdec_add_aliases_for_id(blob, name, id, node_list, maxcount); | |
| } | |
| /* TODO: Can we tighten this code up a little? */ | |
| int fdtdec_add_aliases_for_id(const void *blob, const char *name, | |
| enum fdt_compat_id id, int *node_list, int maxcount) | |
| { | |
| int name_len = strlen(name); | |
| int nodes[maxcount]; | |
| int num_found = 0; | |
| int offset, node; | |
| int alias_node; | |
| int count; | |
| int i, j; | |
| /* find the alias node if present */ | |
| alias_node = fdt_path_offset(blob, "/aliases"); | |
| /* | |
| * start with nothing, and we can assume that the root node can't | |
| * match | |
| */ | |
| memset(nodes, '\0', sizeof(nodes)); | |
| /* First find all the compatible nodes */ | |
| for (node = count = 0; node >= 0 && count < maxcount;) { | |
| node = fdtdec_next_compatible(blob, node, id); | |
| if (node >= 0) | |
| nodes[count++] = node; | |
| } | |
| if (node >= 0) | |
| debug("%s: warning: maxcount exceeded with alias '%s'\n", | |
| __func__, name); | |
| /* Now find all the aliases */ | |
| for (offset = fdt_first_property_offset(blob, alias_node); | |
| offset > 0; | |
| offset = fdt_next_property_offset(blob, offset)) { | |
| const struct fdt_property *prop; | |
| const char *path; | |
| int number; | |
| int found; | |
| node = 0; | |
| prop = fdt_get_property_by_offset(blob, offset, NULL); | |
| path = fdt_string(blob, fdt32_to_cpu(prop->nameoff)); | |
| if (prop->len && 0 == strncmp(path, name, name_len)) | |
| node = fdt_path_offset(blob, prop->data); | |
| if (node <= 0) | |
| continue; | |
| /* Get the alias number */ | |
| number = simple_strtoul(path + name_len, NULL, 10); | |
| if (number < 0 || number >= maxcount) { | |
| debug("%s: warning: alias '%s' is out of range\n", | |
| __func__, path); | |
| continue; | |
| } | |
| /* Make sure the node we found is actually in our list! */ | |
| found = -1; | |
| for (j = 0; j < count; j++) | |
| if (nodes[j] == node) { | |
| found = j; | |
| break; | |
| } | |
| if (found == -1) { | |
| debug("%s: warning: alias '%s' points to a node " | |
| "'%s' that is missing or is not compatible " | |
| " with '%s'\n", __func__, path, | |
| fdt_get_name(blob, node, NULL), | |
| compat_names[id]); | |
| continue; | |
| } | |
| /* | |
| * Add this node to our list in the right place, and mark | |
| * it as done. | |
| */ | |
| if (fdtdec_get_is_enabled(blob, node)) { | |
| if (node_list[number]) { | |
| debug("%s: warning: alias '%s' requires that " | |
| "a node be placed in the list in a " | |
| "position which is already filled by " | |
| "node '%s'\n", __func__, path, | |
| fdt_get_name(blob, node, NULL)); | |
| continue; | |
| } | |
| node_list[number] = node; | |
| if (number >= num_found) | |
| num_found = number + 1; | |
| } | |
| nodes[found] = 0; | |
| } | |
| /* Add any nodes not mentioned by an alias */ | |
| for (i = j = 0; i < maxcount; i++) { | |
| if (!node_list[i]) { | |
| for (; j < maxcount; j++) | |
| if (nodes[j] && | |
| fdtdec_get_is_enabled(blob, nodes[j])) | |
| break; | |
| /* Have we run out of nodes to add? */ | |
| if (j == maxcount) | |
| break; | |
| assert(!node_list[i]); | |
| node_list[i] = nodes[j++]; | |
| if (i >= num_found) | |
| num_found = i + 1; | |
| } | |
| } | |
| return num_found; | |
| } | |
| int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, | |
| int *seqp) | |
| { | |
| int base_len = strlen(base); | |
| const char *find_name; | |
| int find_namelen; | |
| int prop_offset; | |
| int aliases; | |
| find_name = fdt_get_name(blob, offset, &find_namelen); | |
| debug("Looking for '%s' at %d, name %s\n", base, offset, find_name); | |
| aliases = fdt_path_offset(blob, "/aliases"); | |
| for (prop_offset = fdt_first_property_offset(blob, aliases); | |
| prop_offset > 0; | |
| prop_offset = fdt_next_property_offset(blob, prop_offset)) { | |
| const char *prop; | |
| const char *name; | |
| const char *slash; | |
| int len, val; | |
| prop = fdt_getprop_by_offset(blob, prop_offset, &name, &len); | |
| debug(" - %s, %s\n", name, prop); | |
| if (len < find_namelen || *prop != '/' || prop[len - 1] || | |
| strncmp(name, base, base_len)) | |
| continue; | |
| slash = strrchr(prop, '/'); | |
| if (strcmp(slash + 1, find_name)) | |
| continue; | |
| val = trailing_strtol(name); | |
| if (val != -1) { | |
| *seqp = val; | |
| debug("Found seq %d\n", *seqp); | |
| return 0; | |
| } | |
| } | |
| debug("Not found\n"); | |
| return -ENOENT; | |
| } | |
| const char *fdtdec_get_chosen_prop(const void *blob, const char *name) | |
| { | |
| int chosen_node; | |
| if (!blob) | |
| return NULL; | |
| chosen_node = fdt_path_offset(blob, "/chosen"); | |
| return fdt_getprop(blob, chosen_node, name, NULL); | |
| } | |
| int fdtdec_get_chosen_node(const void *blob, const char *name) | |
| { | |
| const char *prop; | |
| prop = fdtdec_get_chosen_prop(blob, name); | |
| if (!prop) | |
| return -FDT_ERR_NOTFOUND; | |
| return fdt_path_offset(blob, prop); | |
| } | |
| int fdtdec_check_fdt(void) | |
| { | |
| /* | |
| * We must have an FDT, but we cannot panic() yet since the console | |
| * is not ready. So for now, just assert(). Boards which need an early | |
| * FDT (prior to console ready) will need to make their own | |
| * arrangements and do their own checks. | |
| */ | |
| assert(!fdtdec_prepare_fdt()); | |
| return 0; | |
| } | |
| /* | |
| * This function is a little odd in that it accesses global data. At some | |
| * point if the architecture board.c files merge this will make more sense. | |
| * Even now, it is common code. | |
| */ | |
| int fdtdec_prepare_fdt(void) | |
| { | |
| if (!gd->fdt_blob || ((uintptr_t)gd->fdt_blob & 3) || | |
| fdt_check_header(gd->fdt_blob)) { | |
| #ifdef CONFIG_SPL_BUILD | |
| puts("Missing DTB\n"); | |
| #else | |
| puts("No valid device tree binary found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>\n"); | |
| # ifdef DEBUG | |
| if (gd->fdt_blob) { | |
| printf("fdt_blob=%p\n", gd->fdt_blob); | |
| print_buffer((ulong)gd->fdt_blob, gd->fdt_blob, 4, | |
| 32, 0); | |
| } | |
| # endif | |
| #endif | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| int fdtdec_lookup_phandle(const void *blob, int node, const char *prop_name) | |
| { | |
| const u32 *phandle; | |
| int lookup; | |
| debug("%s: %s\n", __func__, prop_name); | |
| phandle = fdt_getprop(blob, node, prop_name, NULL); | |
| if (!phandle) | |
| return -FDT_ERR_NOTFOUND; | |
| lookup = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*phandle)); | |
| return lookup; | |
| } | |
| /** | |
| * Look up a property in a node and check that it has a minimum length. | |
| * | |
| * @param blob FDT blob | |
| * @param node node to examine | |
| * @param prop_name name of property to find | |
| * @param min_len minimum property length in bytes | |
| * @param err 0 if ok, or -FDT_ERR_NOTFOUND if the property is not | |
| found, or -FDT_ERR_BADLAYOUT if not enough data | |
| * @return pointer to cell, which is only valid if err == 0 | |
| */ | |
| static const void *get_prop_check_min_len(const void *blob, int node, | |
| const char *prop_name, int min_len, int *err) | |
| { | |
| const void *cell; | |
| int len; | |
| debug("%s: %s\n", __func__, prop_name); | |
| cell = fdt_getprop(blob, node, prop_name, &len); | |
| if (!cell) | |
| *err = -FDT_ERR_NOTFOUND; | |
| else if (len < min_len) | |
| *err = -FDT_ERR_BADLAYOUT; | |
| else | |
| *err = 0; | |
| return cell; | |
| } | |
| int fdtdec_get_int_array(const void *blob, int node, const char *prop_name, | |
| u32 *array, int count) | |
| { | |
| const u32 *cell; | |
| int i, err = 0; | |
| debug("%s: %s\n", __func__, prop_name); | |
| cell = get_prop_check_min_len(blob, node, prop_name, | |
| sizeof(u32) * count, &err); | |
| if (!err) { | |
| for (i = 0; i < count; i++) | |
| array[i] = fdt32_to_cpu(cell[i]); | |
| } | |
| return err; | |
| } | |
| int fdtdec_get_int_array_count(const void *blob, int node, | |
| const char *prop_name, u32 *array, int count) | |
| { | |
| const u32 *cell; | |
| int len, elems; | |
| int i; | |
| debug("%s: %s\n", __func__, prop_name); | |
| cell = fdt_getprop(blob, node, prop_name, &len); | |
| if (!cell) | |
| return -FDT_ERR_NOTFOUND; | |
| elems = len / sizeof(u32); | |
| if (count > elems) | |
| count = elems; | |
| for (i = 0; i < count; i++) | |
| array[i] = fdt32_to_cpu(cell[i]); | |
| return count; | |
| } | |
| const u32 *fdtdec_locate_array(const void *blob, int node, | |
| const char *prop_name, int count) | |
| { | |
| const u32 *cell; | |
| int err; | |
| cell = get_prop_check_min_len(blob, node, prop_name, | |
| sizeof(u32) * count, &err); | |
| return err ? NULL : cell; | |
| } | |
| int fdtdec_get_bool(const void *blob, int node, const char *prop_name) | |
| { | |
| const s32 *cell; | |
| int len; | |
| debug("%s: %s\n", __func__, prop_name); | |
| cell = fdt_getprop(blob, node, prop_name, &len); | |
| return cell != NULL; | |
| } | |
| int fdtdec_parse_phandle_with_args(const void *blob, int src_node, | |
| const char *list_name, | |
| const char *cells_name, | |
| int cell_count, int index, | |
| struct fdtdec_phandle_args *out_args) | |
| { | |
| const __be32 *list, *list_end; | |
| int rc = 0, size, cur_index = 0; | |
| uint32_t count = 0; | |
| int node = -1; | |
| int phandle; | |
| /* Retrieve the phandle list property */ | |
| list = fdt_getprop(blob, src_node, list_name, &size); | |
| if (!list) | |
| return -ENOENT; | |
| list_end = list + size / sizeof(*list); | |
| /* Loop over the phandles until all the requested entry is found */ | |
| while (list < list_end) { | |
| rc = -EINVAL; | |
| count = 0; | |
| /* | |
| * If phandle is 0, then it is an empty entry with no | |
| * arguments. Skip forward to the next entry. | |
| */ | |
| phandle = be32_to_cpup(list++); | |
| if (phandle) { | |
| /* | |
| * Find the provider node and parse the #*-cells | |
| * property to determine the argument length. | |
| * | |
| * This is not needed if the cell count is hard-coded | |
| * (i.e. cells_name not set, but cell_count is set), | |
| * except when we're going to return the found node | |
| * below. | |
| */ | |
| if (cells_name || cur_index == index) { | |
| node = fdt_node_offset_by_phandle(blob, | |
| phandle); | |
| if (!node) { | |
| debug("%s: could not find phandle\n", | |
| fdt_get_name(blob, src_node, | |
| NULL)); | |
| goto err; | |
| } | |
| } | |
| if (cells_name) { | |
| count = fdtdec_get_int(blob, node, cells_name, | |
| -1); | |
| if (count == -1) { | |
| debug("%s: could not get %s for %s\n", | |
| fdt_get_name(blob, src_node, | |
| NULL), | |
| cells_name, | |
| fdt_get_name(blob, node, | |
| NULL)); | |
| goto err; | |
| } | |
| } else { | |
| count = cell_count; | |
| } | |
| /* | |
| * Make sure that the arguments actually fit in the | |
| * remaining property data length | |
| */ | |
| if (list + count > list_end) { | |
| debug("%s: arguments longer than property\n", | |
| fdt_get_name(blob, src_node, NULL)); | |
| goto err; | |
| } | |
| } | |
| /* | |
| * All of the error cases above bail out of the loop, so at | |
| * this point, the parsing is successful. If the requested | |
| * index matches, then fill the out_args structure and return, | |
| * or return -ENOENT for an empty entry. | |
| */ | |
| rc = -ENOENT; | |
| if (cur_index == index) { | |
| if (!phandle) | |
| goto err; | |
| if (out_args) { | |
| int i; | |
| if (count > MAX_PHANDLE_ARGS) { | |
| debug("%s: too many arguments %d\n", | |
| fdt_get_name(blob, src_node, | |
| NULL), count); | |
| count = MAX_PHANDLE_ARGS; | |
| } | |
| out_args->node = node; | |
| out_args->args_count = count; | |
| for (i = 0; i < count; i++) { | |
| out_args->args[i] = | |
| be32_to_cpup(list++); | |
| } | |
| } | |
| /* Found it! return success */ | |
| return 0; | |
| } | |
| node = -1; | |
| list += count; | |
| cur_index++; | |
| } | |
| /* | |
| * Result will be one of: | |
| * -ENOENT : index is for empty phandle | |
| * -EINVAL : parsing error on data | |
| * [1..n] : Number of phandle (count mode; when index = -1) | |
| */ | |
| rc = index < 0 ? cur_index : -ENOENT; | |
| err: | |
| return rc; | |
| } | |
| int fdtdec_get_child_count(const void *blob, int node) | |
| { | |
| int subnode; | |
| int num = 0; | |
| fdt_for_each_subnode(subnode, blob, node) | |
| num++; | |
| return num; | |
| } | |
| int fdtdec_get_byte_array(const void *blob, int node, const char *prop_name, | |
| u8 *array, int count) | |
| { | |
| const u8 *cell; | |
| int err; | |
| cell = get_prop_check_min_len(blob, node, prop_name, count, &err); | |
| if (!err) | |
| memcpy(array, cell, count); | |
| return err; | |
| } | |
| const u8 *fdtdec_locate_byte_array(const void *blob, int node, | |
| const char *prop_name, int count) | |
| { | |
| const u8 *cell; | |
| int err; | |
| cell = get_prop_check_min_len(blob, node, prop_name, count, &err); | |
| if (err) | |
| return NULL; | |
| return cell; | |
| } | |
| int fdtdec_get_config_int(const void *blob, const char *prop_name, | |
| int default_val) | |
| { | |
| int config_node; | |
| debug("%s: %s\n", __func__, prop_name); | |
| config_node = fdt_path_offset(blob, "/config"); | |
| if (config_node < 0) | |
| return default_val; | |
| return fdtdec_get_int(blob, config_node, prop_name, default_val); | |
| } | |
| int fdtdec_get_config_bool(const void *blob, const char *prop_name) | |
| { | |
| int config_node; | |
| const void *prop; | |
| debug("%s: %s\n", __func__, prop_name); | |
| config_node = fdt_path_offset(blob, "/config"); | |
| if (config_node < 0) | |
| return 0; | |
| prop = fdt_get_property(blob, config_node, prop_name, NULL); | |
| return prop != NULL; | |
| } | |
| char *fdtdec_get_config_string(const void *blob, const char *prop_name) | |
| { | |
| const char *nodep; | |
| int nodeoffset; | |
| int len; | |
| debug("%s: %s\n", __func__, prop_name); | |
| nodeoffset = fdt_path_offset(blob, "/config"); | |
| if (nodeoffset < 0) | |
| return NULL; | |
| nodep = fdt_getprop(blob, nodeoffset, prop_name, &len); | |
| if (!nodep) | |
| return NULL; | |
| return (char *)nodep; | |
| } | |
| int fdtdec_decode_region(const void *blob, int node, const char *prop_name, | |
| fdt_addr_t *basep, fdt_size_t *sizep) | |
| { | |
| const fdt_addr_t *cell; | |
| int len; | |
| debug("%s: %s: %s\n", __func__, fdt_get_name(blob, node, NULL), | |
| prop_name); | |
| cell = fdt_getprop(blob, node, prop_name, &len); | |
| if (!cell || (len < sizeof(fdt_addr_t) * 2)) { | |
| debug("cell=%p, len=%d\n", cell, len); | |
| return -1; | |
| } | |
| *basep = fdt_addr_to_cpu(*cell); | |
| *sizep = fdt_size_to_cpu(cell[1]); | |
| debug("%s: base=%08lx, size=%lx\n", __func__, (ulong)*basep, | |
| (ulong)*sizep); | |
| return 0; | |
| } | |
| u64 fdtdec_get_number(const fdt32_t *ptr, unsigned int cells) | |
| { | |
| u64 number = 0; | |
| while (cells--) | |
| number = (number << 32) | fdt32_to_cpu(*ptr++); | |
| return number; | |
| } | |
| int fdt_get_resource(const void *fdt, int node, const char *property, | |
| unsigned int index, struct fdt_resource *res) | |
| { | |
| const fdt32_t *ptr, *end; | |
| int na, ns, len, parent; | |
| unsigned int i = 0; | |
| parent = fdt_parent_offset(fdt, node); | |
| if (parent < 0) | |
| return parent; | |
| na = fdt_address_cells(fdt, parent); | |
| ns = fdt_size_cells(fdt, parent); | |
| ptr = fdt_getprop(fdt, node, property, &len); | |
| if (!ptr) | |
| return len; | |
| end = ptr + len / sizeof(*ptr); | |
| while (ptr + na + ns <= end) { | |
| if (i == index) { | |
| res->start = res->end = fdtdec_get_number(ptr, na); | |
| res->end += fdtdec_get_number(&ptr[na], ns) - 1; | |
| return 0; | |
| } | |
| ptr += na + ns; | |
| i++; | |
| } | |
| return -FDT_ERR_NOTFOUND; | |
| } | |
| int fdt_get_named_resource(const void *fdt, int node, const char *property, | |
| const char *prop_names, const char *name, | |
| struct fdt_resource *res) | |
| { | |
| int index; | |
| index = fdt_stringlist_search(fdt, node, prop_names, name); | |
| if (index < 0) | |
| return index; | |
| return fdt_get_resource(fdt, node, property, index, res); | |
| } | |
| int fdtdec_decode_memory_region(const void *blob, int config_node, | |
| const char *mem_type, const char *suffix, | |
| fdt_addr_t *basep, fdt_size_t *sizep) | |
| { | |
| char prop_name[50]; | |
| const char *mem; | |
| fdt_size_t size, offset_size; | |
| fdt_addr_t base, offset; | |
| int node; | |
| if (config_node == -1) { | |
| config_node = fdt_path_offset(blob, "/config"); | |
| if (config_node < 0) { | |
| debug("%s: Cannot find /config node\n", __func__); | |
| return -ENOENT; | |
| } | |
| } | |
| if (!suffix) | |
| suffix = ""; | |
| snprintf(prop_name, sizeof(prop_name), "%s-memory%s", mem_type, | |
| suffix); | |
| mem = fdt_getprop(blob, config_node, prop_name, NULL); | |
| if (!mem) { | |
| debug("%s: No memory type for '%s', using /memory\n", __func__, | |
| prop_name); | |
| mem = "/memory"; | |
| } | |
| node = fdt_path_offset(blob, mem); | |
| if (node < 0) { | |
| debug("%s: Failed to find node '%s': %s\n", __func__, mem, | |
| fdt_strerror(node)); | |
| return -ENOENT; | |
| } | |
| /* | |
| * Not strictly correct - the memory may have multiple banks. We just | |
| * use the first | |
| */ | |
| if (fdtdec_decode_region(blob, node, "reg", &base, &size)) { | |
| debug("%s: Failed to decode memory region %s\n", __func__, | |
| mem); | |
| return -EINVAL; | |
| } | |
| snprintf(prop_name, sizeof(prop_name), "%s-offset%s", mem_type, | |
| suffix); | |
| if (fdtdec_decode_region(blob, config_node, prop_name, &offset, | |
| &offset_size)) { | |
| debug("%s: Failed to decode memory region '%s'\n", __func__, | |
| prop_name); | |
| return -EINVAL; | |
| } | |
| *basep = base + offset; | |
| *sizep = offset_size; | |
| return 0; | |
| } | |
| static int decode_timing_property(const void *blob, int node, const char *name, | |
| struct timing_entry *result) | |
| { | |
| int length, ret = 0; | |
| const u32 *prop; | |
| prop = fdt_getprop(blob, node, name, &length); | |
| if (!prop) { | |
| debug("%s: could not find property %s\n", | |
| fdt_get_name(blob, node, NULL), name); | |
| return length; | |
| } | |
| if (length == sizeof(u32)) { | |
| result->typ = fdtdec_get_int(blob, node, name, 0); | |
| result->min = result->typ; | |
| result->max = result->typ; | |
| } else { | |
| ret = fdtdec_get_int_array(blob, node, name, &result->min, 3); | |
| } | |
| return ret; | |
| } | |
| int fdtdec_decode_display_timing(const void *blob, int parent, int index, | |
| struct display_timing *dt) | |
| { | |
| int i, node, timings_node; | |
| u32 val = 0; | |
| int ret = 0; | |
| timings_node = fdt_subnode_offset(blob, parent, "display-timings"); | |
| if (timings_node < 0) | |
| return timings_node; | |
| for (i = 0, node = fdt_first_subnode(blob, timings_node); | |
| node > 0 && i != index; | |
| node = fdt_next_subnode(blob, node)) | |
| i++; | |
| if (node < 0) | |
| return node; | |
| memset(dt, 0, sizeof(*dt)); | |
| ret |= decode_timing_property(blob, node, "hback-porch", | |
| &dt->hback_porch); | |
| ret |= decode_timing_property(blob, node, "hfront-porch", | |
| &dt->hfront_porch); | |
| ret |= decode_timing_property(blob, node, "hactive", &dt->hactive); | |
| ret |= decode_timing_property(blob, node, "hsync-len", &dt->hsync_len); | |
| ret |= decode_timing_property(blob, node, "vback-porch", | |
| &dt->vback_porch); | |
| ret |= decode_timing_property(blob, node, "vfront-porch", | |
| &dt->vfront_porch); | |
| ret |= decode_timing_property(blob, node, "vactive", &dt->vactive); | |
| ret |= decode_timing_property(blob, node, "vsync-len", &dt->vsync_len); | |
| ret |= decode_timing_property(blob, node, "clock-frequency", | |
| &dt->pixelclock); | |
| dt->flags = 0; | |
| val = fdtdec_get_int(blob, node, "vsync-active", -1); | |
| if (val != -1) { | |
| dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH : | |
| DISPLAY_FLAGS_VSYNC_LOW; | |
| } | |
| val = fdtdec_get_int(blob, node, "hsync-active", -1); | |
| if (val != -1) { | |
| dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH : | |
| DISPLAY_FLAGS_HSYNC_LOW; | |
| } | |
| val = fdtdec_get_int(blob, node, "de-active", -1); | |
| if (val != -1) { | |
| dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH : | |
| DISPLAY_FLAGS_DE_LOW; | |
| } | |
| val = fdtdec_get_int(blob, node, "pixelclk-active", -1); | |
| if (val != -1) { | |
| dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE : | |
| DISPLAY_FLAGS_PIXDATA_NEGEDGE; | |
| } | |
| if (fdtdec_get_bool(blob, node, "interlaced")) | |
| dt->flags |= DISPLAY_FLAGS_INTERLACED; | |
| if (fdtdec_get_bool(blob, node, "doublescan")) | |
| dt->flags |= DISPLAY_FLAGS_DOUBLESCAN; | |
| if (fdtdec_get_bool(blob, node, "doubleclk")) | |
| dt->flags |= DISPLAY_FLAGS_DOUBLECLK; | |
| return ret; | |
| } | |
| int fdtdec_setup_memory_size(void) | |
| { | |
| int ret, mem; | |
| struct fdt_resource res; | |
| mem = fdt_path_offset(gd->fdt_blob, "/memory"); | |
| if (mem < 0) { | |
| debug("%s: Missing /memory node\n", __func__); | |
| return -EINVAL; | |
| } | |
| ret = fdt_get_resource(gd->fdt_blob, mem, "reg", 0, &res); | |
| if (ret != 0) { | |
| debug("%s: Unable to decode first memory bank\n", __func__); | |
| return -EINVAL; | |
| } | |
| gd->ram_size = (phys_size_t)(res.end - res.start + 1); | |
| debug("%s: Initial DRAM size %llx\n", __func__, | |
| (unsigned long long)gd->ram_size); | |
| return 0; | |
| } | |
| #if defined(CONFIG_NR_DRAM_BANKS) | |
| int fdtdec_setup_memory_banksize(void) | |
| { | |
| int bank, ret, mem, reg = 0; | |
| struct fdt_resource res; | |
| mem = fdt_node_offset_by_prop_value(gd->fdt_blob, -1, "device_type", | |
| "memory", 7); | |
| if (mem < 0) { | |
| debug("%s: Missing /memory node\n", __func__); | |
| return -EINVAL; | |
| } | |
| for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { | |
| ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res); | |
| if (ret == -FDT_ERR_NOTFOUND) { | |
| reg = 0; | |
| mem = fdt_node_offset_by_prop_value(gd->fdt_blob, mem, | |
| "device_type", | |
| "memory", 7); | |
| if (mem == -FDT_ERR_NOTFOUND) | |
| break; | |
| ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res); | |
| if (ret == -FDT_ERR_NOTFOUND) | |
| break; | |
| } | |
| if (ret != 0) { | |
| return -EINVAL; | |
| } | |
| gd->bd->bi_dram[bank].start = (phys_addr_t)res.start; | |
| gd->bd->bi_dram[bank].size = | |
| (phys_size_t)(res.end - res.start + 1); | |
| debug("%s: DRAM Bank #%d: start = 0x%llx, size = 0x%llx\n", | |
| __func__, bank, | |
| (unsigned long long)gd->bd->bi_dram[bank].start, | |
| (unsigned long long)gd->bd->bi_dram[bank].size); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) | |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT_GZIP) ||\ | |
| CONFIG_IS_ENABLED(MULTI_DTB_FIT_LZO) | |
| static int uncompress_blob(const void *src, ulong sz_src, void **dstp) | |
| { | |
| size_t sz_out = CONFIG_SPL_MULTI_DTB_FIT_UNCOMPRESS_SZ; | |
| ulong sz_in = sz_src; | |
| void *dst; | |
| int rc; | |
| if (CONFIG_IS_ENABLED(GZIP)) | |
| if (gzip_parse_header(src, sz_in) < 0) | |
| return -1; | |
| if (CONFIG_IS_ENABLED(LZO)) | |
| if (!lzop_is_valid_header(src)) | |
| return -EBADMSG; | |
| if (CONFIG_IS_ENABLED(MULTI_DTB_FIT_DYN_ALLOC)) { | |
| dst = malloc(sz_out); | |
| if (!dst) { | |
| puts("uncompress_blob: Unable to allocate memory\n"); | |
| return -ENOMEM; | |
| } | |
| } else { | |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT_USER_DEFINED_AREA) | |
| dst = (void *)CONFIG_VAL(MULTI_DTB_FIT_USER_DEF_ADDR); | |
| # else | |
| return -ENOTSUPP; | |
| # endif | |
| } | |
| if (CONFIG_IS_ENABLED(GZIP)) | |
| rc = gunzip(dst, sz_out, (u8 *)src, &sz_in); | |
| else if (CONFIG_IS_ENABLED(LZO)) | |
| rc = lzop_decompress(src, sz_in, dst, &sz_out); | |
| if (rc < 0) { | |
| /* not a valid compressed blob */ | |
| puts("uncompress_blob: Unable to uncompress\n"); | |
| if (CONFIG_IS_ENABLED(MULTI_DTB_FIT_DYN_ALLOC)) | |
| free(dst); | |
| return -EBADMSG; | |
| } | |
| *dstp = dst; | |
| return 0; | |
| } | |
| # else | |
| static int uncompress_blob(const void *src, ulong sz_src, void **dstp) | |
| { | |
| return -ENOTSUPP; | |
| } | |
| # endif | |
| #endif | |
| int fdtdec_setup(void) | |
| { | |
| #if CONFIG_IS_ENABLED(OF_CONTROL) | |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT) | |
| void *fdt_blob; | |
| # endif | |
| # ifdef CONFIG_OF_EMBED | |
| /* Get a pointer to the FDT */ | |
| # ifdef CONFIG_SPL_BUILD | |
| gd->fdt_blob = __dtb_dt_spl_begin; | |
| # else | |
| gd->fdt_blob = __dtb_dt_begin; | |
| # endif | |
| # elif defined CONFIG_OF_SEPARATE | |
| # ifdef CONFIG_SPL_BUILD | |
| /* FDT is at end of BSS unless it is in a different memory region */ | |
| if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)) | |
| gd->fdt_blob = (ulong *)&_image_binary_end; | |
| else | |
| gd->fdt_blob = (ulong *)&__bss_end; | |
| # else | |
| /* FDT is at end of image */ | |
| gd->fdt_blob = (ulong *)&_end; | |
| # endif | |
| # elif defined(CONFIG_OF_BOARD) | |
| /* Allow the board to override the fdt address. */ | |
| gd->fdt_blob = board_fdt_blob_setup(); | |
| # elif defined(CONFIG_OF_HOSTFILE) | |
| if (sandbox_read_fdt_from_file()) { | |
| puts("Failed to read control FDT\n"); | |
| return -1; | |
| } | |
| # endif | |
| # ifndef CONFIG_SPL_BUILD | |
| /* Allow the early environment to override the fdt address */ | |
| gd->fdt_blob = (void *)env_get_ulong("fdtcontroladdr", 16, | |
| (uintptr_t)gd->fdt_blob); | |
| # endif | |
| # if CONFIG_IS_ENABLED(MULTI_DTB_FIT) | |
| /* | |
| * Try and uncompress the blob. | |
| * Unfortunately there is no way to know how big the input blob really | |
| * is. So let us set the maximum input size arbitrarily high. 16MB | |
| * ought to be more than enough for packed DTBs. | |
| */ | |
| if (uncompress_blob(gd->fdt_blob, 0x1000000, &fdt_blob) == 0) | |
| gd->fdt_blob = fdt_blob; | |
| /* | |
| * Check if blob is a FIT images containings DTBs. | |
| * If so, pick the most relevant | |
| */ | |
| fdt_blob = locate_dtb_in_fit(gd->fdt_blob); | |
| if (fdt_blob) | |
| gd->fdt_blob = fdt_blob; | |
| # endif | |
| #endif | |
| return fdtdec_prepare_fdt(); | |
| } | |
| #endif /* !USE_HOSTCC */ |