| /* | |
| * Copyright (c) 2013 Google, Inc | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <dm.h> | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include <errno.h> | |
| #include <fdtdec.h> | |
| #include <malloc.h> | |
| #include <asm/gpio.h> | |
| #include <linux/bug.h> | |
| #include <linux/ctype.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /** | |
| * gpio_to_device() - Convert global GPIO number to device, number | |
| * | |
| * Convert the GPIO number to an entry in the list of GPIOs | |
| * or GPIO blocks registered with the GPIO controller. Returns | |
| * entry on success, NULL on error. | |
| * | |
| * @gpio: The numeric representation of the GPIO | |
| * @desc: Returns description (desc->flags will always be 0) | |
| * @return 0 if found, -ENOENT if not found | |
| */ | |
| static int gpio_to_device(unsigned int gpio, struct gpio_desc *desc) | |
| { | |
| struct gpio_dev_priv *uc_priv; | |
| struct udevice *dev; | |
| int ret; | |
| for (ret = uclass_first_device(UCLASS_GPIO, &dev); | |
| dev; | |
| ret = uclass_next_device(&dev)) { | |
| uc_priv = dev_get_uclass_priv(dev); | |
| if (gpio >= uc_priv->gpio_base && | |
| gpio < uc_priv->gpio_base + uc_priv->gpio_count) { | |
| desc->dev = dev; | |
| desc->offset = gpio - uc_priv->gpio_base; | |
| desc->flags = 0; | |
| return 0; | |
| } | |
| } | |
| /* No such GPIO */ | |
| return ret ? ret : -ENOENT; | |
| } | |
| int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc) | |
| { | |
| struct gpio_dev_priv *uc_priv = NULL; | |
| struct udevice *dev; | |
| ulong offset; | |
| int numeric; | |
| int ret; | |
| numeric = isdigit(*name) ? simple_strtoul(name, NULL, 10) : -1; | |
| for (ret = uclass_first_device(UCLASS_GPIO, &dev); | |
| dev; | |
| ret = uclass_next_device(&dev)) { | |
| int len; | |
| uc_priv = dev_get_uclass_priv(dev); | |
| if (numeric != -1) { | |
| offset = numeric - uc_priv->gpio_base; | |
| /* Allow GPIOs to be numbered from 0 */ | |
| if (offset < uc_priv->gpio_count) | |
| break; | |
| } | |
| len = uc_priv->bank_name ? strlen(uc_priv->bank_name) : 0; | |
| if (!strncasecmp(name, uc_priv->bank_name, len)) { | |
| if (!strict_strtoul(name + len, 10, &offset)) | |
| break; | |
| } | |
| } | |
| if (!dev) | |
| return ret ? ret : -EINVAL; | |
| desc->dev = dev; | |
| desc->offset = offset; | |
| return 0; | |
| } | |
| int gpio_lookup_name(const char *name, struct udevice **devp, | |
| unsigned int *offsetp, unsigned int *gpiop) | |
| { | |
| struct gpio_desc desc; | |
| int ret; | |
| if (devp) | |
| *devp = NULL; | |
| ret = dm_gpio_lookup_name(name, &desc); | |
| if (ret) | |
| return ret; | |
| if (devp) | |
| *devp = desc.dev; | |
| if (offsetp) | |
| *offsetp = desc.offset; | |
| if (gpiop) { | |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(desc.dev); | |
| *gpiop = uc_priv->gpio_base + desc.offset; | |
| } | |
| return 0; | |
| } | |
| int gpio_xlate_offs_flags(struct udevice *dev, struct gpio_desc *desc, | |
| struct ofnode_phandle_args *args) | |
| { | |
| if (args->args_count < 1) | |
| return -EINVAL; | |
| desc->offset = args->args[0]; | |
| if (args->args_count < 2) | |
| return 0; | |
| if (args->args[1] & GPIO_ACTIVE_LOW) | |
| desc->flags = GPIOD_ACTIVE_LOW; | |
| return 0; | |
| } | |
| static int gpio_find_and_xlate(struct gpio_desc *desc, | |
| struct ofnode_phandle_args *args) | |
| { | |
| struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); | |
| if (ops->xlate) | |
| return ops->xlate(desc->dev, desc, args); | |
| else | |
| return gpio_xlate_offs_flags(desc->dev, desc, args); | |
| } | |
| int dm_gpio_request(struct gpio_desc *desc, const char *label) | |
| { | |
| struct udevice *dev = desc->dev; | |
| struct gpio_dev_priv *uc_priv; | |
| char *str; | |
| int ret; | |
| uc_priv = dev_get_uclass_priv(dev); | |
| if (uc_priv->name[desc->offset]) | |
| return -EBUSY; | |
| str = strdup(label); | |
| if (!str) | |
| return -ENOMEM; | |
| if (gpio_get_ops(dev)->request) { | |
| ret = gpio_get_ops(dev)->request(dev, desc->offset, label); | |
| if (ret) { | |
| free(str); | |
| return ret; | |
| } | |
| } | |
| uc_priv->name[desc->offset] = str; | |
| return 0; | |
| } | |
| static int dm_gpio_requestf(struct gpio_desc *desc, const char *fmt, ...) | |
| { | |
| #if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_USE_TINY_PRINTF) | |
| va_list args; | |
| char buf[40]; | |
| va_start(args, fmt); | |
| vscnprintf(buf, sizeof(buf), fmt, args); | |
| va_end(args); | |
| return dm_gpio_request(desc, buf); | |
| #else | |
| return dm_gpio_request(desc, fmt); | |
| #endif | |
| } | |
| /** | |
| * gpio_request() - [COMPAT] Request GPIO | |
| * gpio: GPIO number | |
| * label: Name for the requested GPIO | |
| * | |
| * The label is copied and allocated so the caller does not need to keep | |
| * the pointer around. | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns 0 on success, negative value on error. | |
| */ | |
| int gpio_request(unsigned gpio, const char *label) | |
| { | |
| struct gpio_desc desc; | |
| int ret; | |
| ret = gpio_to_device(gpio, &desc); | |
| if (ret) | |
| return ret; | |
| return dm_gpio_request(&desc, label); | |
| } | |
| /** | |
| * gpio_requestf() - [COMPAT] Request GPIO | |
| * @gpio: GPIO number | |
| * @fmt: Format string for the requested GPIO | |
| * @...: Arguments for the printf() format string | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns 0 on success, negative value on error. | |
| */ | |
| int gpio_requestf(unsigned gpio, const char *fmt, ...) | |
| { | |
| #if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_USE_TINY_PRINTF) | |
| va_list args; | |
| char buf[40]; | |
| va_start(args, fmt); | |
| vscnprintf(buf, sizeof(buf), fmt, args); | |
| va_end(args); | |
| return gpio_request(gpio, buf); | |
| #else | |
| return gpio_request(gpio, fmt); | |
| #endif | |
| } | |
| int _dm_gpio_free(struct udevice *dev, uint offset) | |
| { | |
| struct gpio_dev_priv *uc_priv; | |
| int ret; | |
| uc_priv = dev_get_uclass_priv(dev); | |
| if (!uc_priv->name[offset]) | |
| return -ENXIO; | |
| if (gpio_get_ops(dev)->free) { | |
| ret = gpio_get_ops(dev)->free(dev, offset); | |
| if (ret) | |
| return ret; | |
| } | |
| free(uc_priv->name[offset]); | |
| uc_priv->name[offset] = NULL; | |
| return 0; | |
| } | |
| /** | |
| * gpio_free() - [COMPAT] Relinquish GPIO | |
| * gpio: GPIO number | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns 0 on success, negative value on error. | |
| */ | |
| int gpio_free(unsigned gpio) | |
| { | |
| struct gpio_desc desc; | |
| int ret; | |
| ret = gpio_to_device(gpio, &desc); | |
| if (ret) | |
| return ret; | |
| return _dm_gpio_free(desc.dev, desc.offset); | |
| } | |
| static int check_reserved(const struct gpio_desc *desc, const char *func) | |
| { | |
| struct gpio_dev_priv *uc_priv; | |
| if (!dm_gpio_is_valid(desc)) | |
| return -ENOENT; | |
| uc_priv = dev_get_uclass_priv(desc->dev); | |
| if (!uc_priv->name[desc->offset]) { | |
| printf("%s: %s: error: gpio %s%d not reserved\n", | |
| desc->dev->name, func, | |
| uc_priv->bank_name ? uc_priv->bank_name : "", | |
| desc->offset); | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * gpio_direction_input() - [COMPAT] Set GPIO direction to input | |
| * gpio: GPIO number | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns 0 on success, negative value on error. | |
| */ | |
| int gpio_direction_input(unsigned gpio) | |
| { | |
| struct gpio_desc desc; | |
| int ret; | |
| ret = gpio_to_device(gpio, &desc); | |
| if (ret) | |
| return ret; | |
| ret = check_reserved(&desc, "dir_input"); | |
| if (ret) | |
| return ret; | |
| return gpio_get_ops(desc.dev)->direction_input(desc.dev, desc.offset); | |
| } | |
| /** | |
| * gpio_direction_output() - [COMPAT] Set GPIO direction to output and set value | |
| * gpio: GPIO number | |
| * value: Logical value to be set on the GPIO pin | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns 0 on success, negative value on error. | |
| */ | |
| int gpio_direction_output(unsigned gpio, int value) | |
| { | |
| struct gpio_desc desc; | |
| int ret; | |
| ret = gpio_to_device(gpio, &desc); | |
| if (ret) | |
| return ret; | |
| ret = check_reserved(&desc, "dir_output"); | |
| if (ret) | |
| return ret; | |
| return gpio_get_ops(desc.dev)->direction_output(desc.dev, | |
| desc.offset, value); | |
| } | |
| int dm_gpio_get_value(const struct gpio_desc *desc) | |
| { | |
| int value; | |
| int ret; | |
| ret = check_reserved(desc, "get_value"); | |
| if (ret) | |
| return ret; | |
| value = gpio_get_ops(desc->dev)->get_value(desc->dev, desc->offset); | |
| return desc->flags & GPIOD_ACTIVE_LOW ? !value : value; | |
| } | |
| int dm_gpio_set_value(const struct gpio_desc *desc, int value) | |
| { | |
| int ret; | |
| ret = check_reserved(desc, "set_value"); | |
| if (ret) | |
| return ret; | |
| if (desc->flags & GPIOD_ACTIVE_LOW) | |
| value = !value; | |
| gpio_get_ops(desc->dev)->set_value(desc->dev, desc->offset, value); | |
| return 0; | |
| } | |
| int dm_gpio_get_open_drain(struct gpio_desc *desc) | |
| { | |
| struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); | |
| int ret; | |
| ret = check_reserved(desc, "get_open_drain"); | |
| if (ret) | |
| return ret; | |
| if (ops->set_open_drain) | |
| return ops->get_open_drain(desc->dev, desc->offset); | |
| else | |
| return -ENOSYS; | |
| } | |
| int dm_gpio_set_open_drain(struct gpio_desc *desc, int value) | |
| { | |
| struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); | |
| int ret; | |
| ret = check_reserved(desc, "set_open_drain"); | |
| if (ret) | |
| return ret; | |
| if (ops->set_open_drain) | |
| ret = ops->set_open_drain(desc->dev, desc->offset, value); | |
| else | |
| return 0; /* feature not supported -> ignore setting */ | |
| return ret; | |
| } | |
| int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags) | |
| { | |
| struct udevice *dev = desc->dev; | |
| struct dm_gpio_ops *ops = gpio_get_ops(dev); | |
| int ret; | |
| ret = check_reserved(desc, "set_dir"); | |
| if (ret) | |
| return ret; | |
| if (flags & GPIOD_IS_OUT) { | |
| int value = flags & GPIOD_IS_OUT_ACTIVE ? 1 : 0; | |
| if (flags & GPIOD_ACTIVE_LOW) | |
| value = !value; | |
| ret = ops->direction_output(dev, desc->offset, value); | |
| } else if (flags & GPIOD_IS_IN) { | |
| ret = ops->direction_input(dev, desc->offset); | |
| } | |
| if (ret) | |
| return ret; | |
| /* | |
| * Update desc->flags here, so that GPIO_ACTIVE_LOW is honoured in | |
| * futures | |
| */ | |
| desc->flags = flags; | |
| return 0; | |
| } | |
| int dm_gpio_set_dir(struct gpio_desc *desc) | |
| { | |
| return dm_gpio_set_dir_flags(desc, desc->flags); | |
| } | |
| /** | |
| * gpio_get_value() - [COMPAT] Sample GPIO pin and return it's value | |
| * gpio: GPIO number | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns the value of the GPIO pin, or negative value | |
| * on error. | |
| */ | |
| int gpio_get_value(unsigned gpio) | |
| { | |
| int ret; | |
| struct gpio_desc desc; | |
| ret = gpio_to_device(gpio, &desc); | |
| if (ret) | |
| return ret; | |
| return dm_gpio_get_value(&desc); | |
| } | |
| /** | |
| * gpio_set_value() - [COMPAT] Configure logical value on GPIO pin | |
| * gpio: GPIO number | |
| * value: Logical value to be set on the GPIO pin. | |
| * | |
| * This function implements the API that's compatible with current | |
| * GPIO API used in U-Boot. The request is forwarded to particular | |
| * GPIO driver. Returns 0 on success, negative value on error. | |
| */ | |
| int gpio_set_value(unsigned gpio, int value) | |
| { | |
| struct gpio_desc desc; | |
| int ret; | |
| ret = gpio_to_device(gpio, &desc); | |
| if (ret) | |
| return ret; | |
| return dm_gpio_set_value(&desc, value); | |
| } | |
| const char *gpio_get_bank_info(struct udevice *dev, int *bit_count) | |
| { | |
| struct gpio_dev_priv *priv; | |
| /* Must be called on an active device */ | |
| priv = dev_get_uclass_priv(dev); | |
| assert(priv); | |
| *bit_count = priv->gpio_count; | |
| return priv->bank_name; | |
| } | |
| static const char * const gpio_function[GPIOF_COUNT] = { | |
| "input", | |
| "output", | |
| "unused", | |
| "unknown", | |
| "func", | |
| }; | |
| static int get_function(struct udevice *dev, int offset, bool skip_unused, | |
| const char **namep) | |
| { | |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); | |
| struct dm_gpio_ops *ops = gpio_get_ops(dev); | |
| BUILD_BUG_ON(GPIOF_COUNT != ARRAY_SIZE(gpio_function)); | |
| if (!device_active(dev)) | |
| return -ENODEV; | |
| if (offset < 0 || offset >= uc_priv->gpio_count) | |
| return -EINVAL; | |
| if (namep) | |
| *namep = uc_priv->name[offset]; | |
| if (skip_unused && !uc_priv->name[offset]) | |
| return GPIOF_UNUSED; | |
| if (ops->get_function) { | |
| int ret; | |
| ret = ops->get_function(dev, offset); | |
| if (ret < 0) | |
| return ret; | |
| if (ret >= ARRAY_SIZE(gpio_function)) | |
| return -ENODATA; | |
| return ret; | |
| } | |
| return GPIOF_UNKNOWN; | |
| } | |
| int gpio_get_function(struct udevice *dev, int offset, const char **namep) | |
| { | |
| return get_function(dev, offset, true, namep); | |
| } | |
| int gpio_get_raw_function(struct udevice *dev, int offset, const char **namep) | |
| { | |
| return get_function(dev, offset, false, namep); | |
| } | |
| int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize) | |
| { | |
| struct dm_gpio_ops *ops = gpio_get_ops(dev); | |
| struct gpio_dev_priv *priv; | |
| char *str = buf; | |
| int func; | |
| int ret; | |
| int len; | |
| BUILD_BUG_ON(GPIOF_COUNT != ARRAY_SIZE(gpio_function)); | |
| *buf = 0; | |
| priv = dev_get_uclass_priv(dev); | |
| ret = gpio_get_raw_function(dev, offset, NULL); | |
| if (ret < 0) | |
| return ret; | |
| func = ret; | |
| len = snprintf(str, buffsize, "%s%d: %s", | |
| priv->bank_name ? priv->bank_name : "", | |
| offset, gpio_function[func]); | |
| if (func == GPIOF_INPUT || func == GPIOF_OUTPUT || | |
| func == GPIOF_UNUSED) { | |
| const char *label; | |
| bool used; | |
| ret = ops->get_value(dev, offset); | |
| if (ret < 0) | |
| return ret; | |
| used = gpio_get_function(dev, offset, &label) != GPIOF_UNUSED; | |
| snprintf(str + len, buffsize - len, ": %d [%c]%s%s", | |
| ret, | |
| used ? 'x' : ' ', | |
| used ? " " : "", | |
| label ? label : ""); | |
| } | |
| return 0; | |
| } | |
| int gpio_claim_vector(const int *gpio_num_array, const char *fmt) | |
| { | |
| int i, ret; | |
| int gpio; | |
| for (i = 0; i < 32; i++) { | |
| gpio = gpio_num_array[i]; | |
| if (gpio == -1) | |
| break; | |
| ret = gpio_requestf(gpio, fmt, i); | |
| if (ret) | |
| goto err; | |
| ret = gpio_direction_input(gpio); | |
| if (ret) { | |
| gpio_free(gpio); | |
| goto err; | |
| } | |
| } | |
| return 0; | |
| err: | |
| for (i--; i >= 0; i--) | |
| gpio_free(gpio_num_array[i]); | |
| return ret; | |
| } | |
| /* | |
| * get a number comprised of multiple GPIO values. gpio_num_array points to | |
| * the array of gpio pin numbers to scan, terminated by -1. | |
| */ | |
| int gpio_get_values_as_int(const int *gpio_list) | |
| { | |
| int gpio; | |
| unsigned bitmask = 1; | |
| unsigned vector = 0; | |
| int ret; | |
| while (bitmask && | |
| ((gpio = *gpio_list++) != -1)) { | |
| ret = gpio_get_value(gpio); | |
| if (ret < 0) | |
| return ret; | |
| else if (ret) | |
| vector |= bitmask; | |
| bitmask <<= 1; | |
| } | |
| return vector; | |
| } | |
| int dm_gpio_get_values_as_int(const struct gpio_desc *desc_list, int count) | |
| { | |
| unsigned bitmask = 1; | |
| unsigned vector = 0; | |
| int ret, i; | |
| for (i = 0; i < count; i++) { | |
| ret = dm_gpio_get_value(&desc_list[i]); | |
| if (ret < 0) | |
| return ret; | |
| else if (ret) | |
| vector |= bitmask; | |
| bitmask <<= 1; | |
| } | |
| return vector; | |
| } | |
| static int gpio_request_tail(int ret, ofnode node, | |
| struct ofnode_phandle_args *args, | |
| const char *list_name, int index, | |
| struct gpio_desc *desc, int flags, bool add_index) | |
| { | |
| desc->dev = NULL; | |
| desc->offset = 0; | |
| desc->flags = 0; | |
| if (ret) | |
| goto err; | |
| ret = uclass_get_device_by_ofnode(UCLASS_GPIO, args->node, | |
| &desc->dev); | |
| if (ret) { | |
| debug("%s: uclass_get_device_by_of_offset failed\n", __func__); | |
| goto err; | |
| } | |
| ret = gpio_find_and_xlate(desc, args); | |
| if (ret) { | |
| debug("%s: gpio_find_and_xlate failed\n", __func__); | |
| goto err; | |
| } | |
| ret = dm_gpio_requestf(desc, add_index ? "%s.%s%d" : "%s.%s", | |
| ofnode_get_name(node), | |
| list_name, index); | |
| if (ret) { | |
| debug("%s: dm_gpio_requestf failed\n", __func__); | |
| goto err; | |
| } | |
| ret = dm_gpio_set_dir_flags(desc, flags | desc->flags); | |
| if (ret) { | |
| debug("%s: dm_gpio_set_dir failed\n", __func__); | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| debug("%s: Node '%s', property '%s', failed to request GPIO index %d: %d\n", | |
| __func__, ofnode_get_name(node), list_name, index, ret); | |
| return ret; | |
| } | |
| static int _gpio_request_by_name_nodev(ofnode node, const char *list_name, | |
| int index, struct gpio_desc *desc, | |
| int flags, bool add_index) | |
| { | |
| struct ofnode_phandle_args args; | |
| int ret; | |
| ret = ofnode_parse_phandle_with_args(node, list_name, "#gpio-cells", 0, | |
| index, &args); | |
| return gpio_request_tail(ret, node, &args, list_name, index, desc, | |
| flags, add_index); | |
| } | |
| int gpio_request_by_name_nodev(ofnode node, const char *list_name, int index, | |
| struct gpio_desc *desc, int flags) | |
| { | |
| return _gpio_request_by_name_nodev(node, list_name, index, desc, flags, | |
| index > 0); | |
| } | |
| int gpio_request_by_name(struct udevice *dev, const char *list_name, int index, | |
| struct gpio_desc *desc, int flags) | |
| { | |
| struct ofnode_phandle_args args; | |
| int ret; | |
| ret = dev_read_phandle_with_args(dev, list_name, "#gpio-cells", 0, | |
| index, &args); | |
| return gpio_request_tail(ret, dev_ofnode(dev), &args, list_name, | |
| index, desc, flags, index > 0); | |
| } | |
| int gpio_request_list_by_name_nodev(ofnode node, const char *list_name, | |
| struct gpio_desc *desc, int max_count, | |
| int flags) | |
| { | |
| int count; | |
| int ret; | |
| for (count = 0; count < max_count; count++) { | |
| ret = _gpio_request_by_name_nodev(node, list_name, count, | |
| &desc[count], flags, true); | |
| if (ret == -ENOENT) | |
| break; | |
| else if (ret) | |
| goto err; | |
| } | |
| /* We ran out of GPIOs in the list */ | |
| return count; | |
| err: | |
| gpio_free_list_nodev(desc, count - 1); | |
| return ret; | |
| } | |
| int gpio_request_list_by_name(struct udevice *dev, const char *list_name, | |
| struct gpio_desc *desc, int max_count, | |
| int flags) | |
| { | |
| /* | |
| * This isn't ideal since we don't use dev->name in the debug() | |
| * calls in gpio_request_by_name(), but we can do this until | |
| * gpio_request_list_by_name_nodev() can be dropped. | |
| */ | |
| return gpio_request_list_by_name_nodev(dev_ofnode(dev), list_name, desc, | |
| max_count, flags); | |
| } | |
| int gpio_get_list_count(struct udevice *dev, const char *list_name) | |
| { | |
| int ret; | |
| ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev_of_offset(dev), | |
| list_name, "#gpio-cells", 0, -1, | |
| NULL); | |
| if (ret) { | |
| debug("%s: Node '%s', property '%s', GPIO count failed: %d\n", | |
| __func__, dev->name, list_name, ret); | |
| } | |
| return ret; | |
| } | |
| int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc) | |
| { | |
| /* For now, we don't do any checking of dev */ | |
| return _dm_gpio_free(desc->dev, desc->offset); | |
| } | |
| int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count) | |
| { | |
| int i; | |
| /* For now, we don't do any checking of dev */ | |
| for (i = 0; i < count; i++) | |
| dm_gpio_free(dev, &desc[i]); | |
| return 0; | |
| } | |
| int gpio_free_list_nodev(struct gpio_desc *desc, int count) | |
| { | |
| return gpio_free_list(NULL, desc, count); | |
| } | |
| /* We need to renumber the GPIOs when any driver is probed/removed */ | |
| static int gpio_renumber(struct udevice *removed_dev) | |
| { | |
| struct gpio_dev_priv *uc_priv; | |
| struct udevice *dev; | |
| struct uclass *uc; | |
| unsigned base; | |
| int ret; | |
| ret = uclass_get(UCLASS_GPIO, &uc); | |
| if (ret) | |
| return ret; | |
| /* Ensure that we have a base for each bank */ | |
| base = 0; | |
| uclass_foreach_dev(dev, uc) { | |
| if (device_active(dev) && dev != removed_dev) { | |
| uc_priv = dev_get_uclass_priv(dev); | |
| uc_priv->gpio_base = base; | |
| base += uc_priv->gpio_count; | |
| } | |
| } | |
| return 0; | |
| } | |
| int gpio_get_number(const struct gpio_desc *desc) | |
| { | |
| struct udevice *dev = desc->dev; | |
| struct gpio_dev_priv *uc_priv; | |
| if (!dev) | |
| return -1; | |
| uc_priv = dev->uclass_priv; | |
| return uc_priv->gpio_base + desc->offset; | |
| } | |
| static int gpio_post_probe(struct udevice *dev) | |
| { | |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); | |
| uc_priv->name = calloc(uc_priv->gpio_count, sizeof(char *)); | |
| if (!uc_priv->name) | |
| return -ENOMEM; | |
| return gpio_renumber(NULL); | |
| } | |
| static int gpio_pre_remove(struct udevice *dev) | |
| { | |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); | |
| int i; | |
| for (i = 0; i < uc_priv->gpio_count; i++) { | |
| if (uc_priv->name[i]) | |
| free(uc_priv->name[i]); | |
| } | |
| free(uc_priv->name); | |
| return gpio_renumber(dev); | |
| } | |
| UCLASS_DRIVER(gpio) = { | |
| .id = UCLASS_GPIO, | |
| .name = "gpio", | |
| .flags = DM_UC_FLAG_SEQ_ALIAS, | |
| .post_probe = gpio_post_probe, | |
| .pre_remove = gpio_pre_remove, | |
| .per_device_auto_alloc_size = sizeof(struct gpio_dev_priv), | |
| }; |