| /* | |
| * Porting to u-boot: | |
| * | |
| * (C) Copyright 2010 | |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de | |
| * | |
| * Linux IPU driver for MX51: | |
| * | |
| * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| /* #define DEBUG */ | |
| #include <common.h> | |
| #include <linux/types.h> | |
| #include <linux/err.h> | |
| #include <asm/io.h> | |
| #include <linux/errno.h> | |
| #include <asm/arch/imx-regs.h> | |
| #include <asm/arch/crm_regs.h> | |
| #include <asm/arch/sys_proto.h> | |
| #include <div64.h> | |
| #include "ipu.h" | |
| #include "ipu_regs.h" | |
| extern struct mxc_ccm_reg *mxc_ccm; | |
| extern u32 *ipu_cpmem_base; | |
| struct ipu_ch_param_word { | |
| uint32_t data[5]; | |
| uint32_t res[3]; | |
| }; | |
| struct ipu_ch_param { | |
| struct ipu_ch_param_word word[2]; | |
| }; | |
| #define ipu_ch_param_addr(ch) (((struct ipu_ch_param *)ipu_cpmem_base) + (ch)) | |
| #define _param_word(base, w) \ | |
| (((struct ipu_ch_param *)(base))->word[(w)].data) | |
| #define ipu_ch_param_set_field(base, w, bit, size, v) { \ | |
| int i = (bit) / 32; \ | |
| int off = (bit) % 32; \ | |
| _param_word(base, w)[i] |= (v) << off; \ | |
| if (((bit) + (size) - 1) / 32 > i) { \ | |
| _param_word(base, w)[i + 1] |= (v) >> (off ? (32 - off) : 0); \ | |
| } \ | |
| } | |
| #define ipu_ch_param_mod_field(base, w, bit, size, v) { \ | |
| int i = (bit) / 32; \ | |
| int off = (bit) % 32; \ | |
| u32 mask = (1UL << size) - 1; \ | |
| u32 temp = _param_word(base, w)[i]; \ | |
| temp &= ~(mask << off); \ | |
| _param_word(base, w)[i] = temp | (v) << off; \ | |
| if (((bit) + (size) - 1) / 32 > i) { \ | |
| temp = _param_word(base, w)[i + 1]; \ | |
| temp &= ~(mask >> (32 - off)); \ | |
| _param_word(base, w)[i + 1] = \ | |
| temp | ((v) >> (off ? (32 - off) : 0)); \ | |
| } \ | |
| } | |
| #define ipu_ch_param_read_field(base, w, bit, size) ({ \ | |
| u32 temp2; \ | |
| int i = (bit) / 32; \ | |
| int off = (bit) % 32; \ | |
| u32 mask = (1UL << size) - 1; \ | |
| u32 temp1 = _param_word(base, w)[i]; \ | |
| temp1 = mask & (temp1 >> off); \ | |
| if (((bit)+(size) - 1) / 32 > i) { \ | |
| temp2 = _param_word(base, w)[i + 1]; \ | |
| temp2 &= mask >> (off ? (32 - off) : 0); \ | |
| temp1 |= temp2 << (off ? (32 - off) : 0); \ | |
| } \ | |
| temp1; \ | |
| }) | |
| #define IPU_SW_RST_TOUT_USEC (10000) | |
| #define IPUV3_CLK_MX51 133000000 | |
| #define IPUV3_CLK_MX53 200000000 | |
| #define IPUV3_CLK_MX6Q 264000000 | |
| #define IPUV3_CLK_MX6DL 198000000 | |
| void clk_enable(struct clk *clk) | |
| { | |
| if (clk) { | |
| if (clk->usecount++ == 0) { | |
| clk->enable(clk); | |
| } | |
| } | |
| } | |
| void clk_disable(struct clk *clk) | |
| { | |
| if (clk) { | |
| if (!(--clk->usecount)) { | |
| if (clk->disable) | |
| clk->disable(clk); | |
| } | |
| } | |
| } | |
| int clk_get_usecount(struct clk *clk) | |
| { | |
| if (clk == NULL) | |
| return 0; | |
| return clk->usecount; | |
| } | |
| u32 clk_get_rate(struct clk *clk) | |
| { | |
| if (!clk) | |
| return 0; | |
| return clk->rate; | |
| } | |
| struct clk *clk_get_parent(struct clk *clk) | |
| { | |
| if (!clk) | |
| return 0; | |
| return clk->parent; | |
| } | |
| int clk_set_rate(struct clk *clk, unsigned long rate) | |
| { | |
| if (clk && clk->set_rate) | |
| clk->set_rate(clk, rate); | |
| return clk->rate; | |
| } | |
| long clk_round_rate(struct clk *clk, unsigned long rate) | |
| { | |
| if (clk == NULL || !clk->round_rate) | |
| return 0; | |
| return clk->round_rate(clk, rate); | |
| } | |
| int clk_set_parent(struct clk *clk, struct clk *parent) | |
| { | |
| clk->parent = parent; | |
| if (clk->set_parent) | |
| return clk->set_parent(clk, parent); | |
| return 0; | |
| } | |
| static int clk_ipu_enable(struct clk *clk) | |
| { | |
| u32 reg; | |
| reg = __raw_readl(clk->enable_reg); | |
| reg |= MXC_CCM_CCGR_CG_MASK << clk->enable_shift; | |
| __raw_writel(reg, clk->enable_reg); | |
| #if defined(CONFIG_MX51) || defined(CONFIG_MX53) | |
| /* Handshake with IPU when certain clock rates are changed. */ | |
| reg = __raw_readl(&mxc_ccm->ccdr); | |
| reg &= ~MXC_CCM_CCDR_IPU_HS_MASK; | |
| __raw_writel(reg, &mxc_ccm->ccdr); | |
| /* Handshake with IPU when LPM is entered as its enabled. */ | |
| reg = __raw_readl(&mxc_ccm->clpcr); | |
| reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; | |
| __raw_writel(reg, &mxc_ccm->clpcr); | |
| #endif | |
| return 0; | |
| } | |
| static void clk_ipu_disable(struct clk *clk) | |
| { | |
| u32 reg; | |
| reg = __raw_readl(clk->enable_reg); | |
| reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift); | |
| __raw_writel(reg, clk->enable_reg); | |
| #if defined(CONFIG_MX51) || defined(CONFIG_MX53) | |
| /* | |
| * No handshake with IPU whe dividers are changed | |
| * as its not enabled. | |
| */ | |
| reg = __raw_readl(&mxc_ccm->ccdr); | |
| reg |= MXC_CCM_CCDR_IPU_HS_MASK; | |
| __raw_writel(reg, &mxc_ccm->ccdr); | |
| /* No handshake with IPU when LPM is entered as its not enabled. */ | |
| reg = __raw_readl(&mxc_ccm->clpcr); | |
| reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; | |
| __raw_writel(reg, &mxc_ccm->clpcr); | |
| #endif | |
| } | |
| static struct clk ipu_clk = { | |
| .name = "ipu_clk", | |
| #if defined(CONFIG_MX51) || defined(CONFIG_MX53) | |
| .enable_reg = (u32 *)(CCM_BASE_ADDR + | |
| offsetof(struct mxc_ccm_reg, CCGR5)), | |
| .enable_shift = MXC_CCM_CCGR5_IPU_OFFSET, | |
| #else | |
| .enable_reg = (u32 *)(CCM_BASE_ADDR + | |
| offsetof(struct mxc_ccm_reg, CCGR3)), | |
| .enable_shift = MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET, | |
| #endif | |
| .enable = clk_ipu_enable, | |
| .disable = clk_ipu_disable, | |
| .usecount = 0, | |
| }; | |
| #if !defined CONFIG_SYS_LDB_CLOCK | |
| #define CONFIG_SYS_LDB_CLOCK 65000000 | |
| #endif | |
| static struct clk ldb_clk = { | |
| .name = "ldb_clk", | |
| .rate = CONFIG_SYS_LDB_CLOCK, | |
| .usecount = 0, | |
| }; | |
| /* Globals */ | |
| struct clk *g_ipu_clk; | |
| struct clk *g_ldb_clk; | |
| unsigned char g_ipu_clk_enabled; | |
| struct clk *g_di_clk[2]; | |
| struct clk *g_pixel_clk[2]; | |
| unsigned char g_dc_di_assignment[10]; | |
| uint32_t g_channel_init_mask; | |
| uint32_t g_channel_enable_mask; | |
| static int ipu_dc_use_count; | |
| static int ipu_dp_use_count; | |
| static int ipu_dmfc_use_count; | |
| static int ipu_di_use_count[2]; | |
| u32 *ipu_cpmem_base; | |
| u32 *ipu_dc_tmpl_reg; | |
| /* Static functions */ | |
| static inline void ipu_ch_param_set_high_priority(uint32_t ch) | |
| { | |
| ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 93, 2, 1); | |
| }; | |
| static inline uint32_t channel_2_dma(ipu_channel_t ch, ipu_buffer_t type) | |
| { | |
| return ((uint32_t) ch >> (6 * type)) & 0x3F; | |
| }; | |
| /* Either DP BG or DP FG can be graphic window */ | |
| static inline int ipu_is_dp_graphic_chan(uint32_t dma_chan) | |
| { | |
| return (dma_chan == 23 || dma_chan == 27); | |
| } | |
| static inline int ipu_is_dmfc_chan(uint32_t dma_chan) | |
| { | |
| return ((dma_chan >= 23) && (dma_chan <= 29)); | |
| } | |
| static inline void ipu_ch_param_set_buffer(uint32_t ch, int bufNum, | |
| dma_addr_t phyaddr) | |
| { | |
| ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 29 * bufNum, 29, | |
| phyaddr / 8); | |
| }; | |
| #define idma_is_valid(ch) (ch != NO_DMA) | |
| #define idma_mask(ch) (idma_is_valid(ch) ? (1UL << (ch & 0x1F)) : 0) | |
| #define idma_is_set(reg, dma) (__raw_readl(reg(dma)) & idma_mask(dma)) | |
| static void ipu_pixel_clk_recalc(struct clk *clk) | |
| { | |
| u32 div; | |
| u64 final_rate = (unsigned long long)clk->parent->rate * 16; | |
| div = __raw_readl(DI_BS_CLKGEN0(clk->id)); | |
| debug("read BS_CLKGEN0 div:%d, final_rate:%lld, prate:%ld\n", | |
| div, final_rate, clk->parent->rate); | |
| clk->rate = 0; | |
| if (div != 0) { | |
| do_div(final_rate, div); | |
| clk->rate = final_rate; | |
| } | |
| } | |
| static unsigned long ipu_pixel_clk_round_rate(struct clk *clk, | |
| unsigned long rate) | |
| { | |
| u64 div, final_rate; | |
| u32 remainder; | |
| u64 parent_rate = (unsigned long long)clk->parent->rate * 16; | |
| /* | |
| * Calculate divider | |
| * Fractional part is 4 bits, | |
| * so simply multiply by 2^4 to get fractional part. | |
| */ | |
| div = parent_rate; | |
| remainder = do_div(div, rate); | |
| /* Round the divider value */ | |
| if (remainder > (rate / 2)) | |
| div++; | |
| if (div < 0x10) /* Min DI disp clock divider is 1 */ | |
| div = 0x10; | |
| if (div & ~0xFEF) | |
| div &= 0xFF8; | |
| else { | |
| /* Round up divider if it gets us closer to desired pix clk */ | |
| if ((div & 0xC) == 0xC) { | |
| div += 0x10; | |
| div &= ~0xF; | |
| } | |
| } | |
| final_rate = parent_rate; | |
| do_div(final_rate, div); | |
| return final_rate; | |
| } | |
| static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate) | |
| { | |
| u64 div, parent_rate; | |
| u32 remainder; | |
| parent_rate = (unsigned long long)clk->parent->rate * 16; | |
| div = parent_rate; | |
| remainder = do_div(div, rate); | |
| /* Round the divider value */ | |
| if (remainder > (rate / 2)) | |
| div++; | |
| /* Round up divider if it gets us closer to desired pix clk */ | |
| if ((div & 0xC) == 0xC) { | |
| div += 0x10; | |
| div &= ~0xF; | |
| } | |
| if (div > 0x1000) | |
| debug("Overflow, DI_BS_CLKGEN0 div:0x%x\n", (u32)div); | |
| __raw_writel(div, DI_BS_CLKGEN0(clk->id)); | |
| /* | |
| * Setup pixel clock timing | |
| * Down time is half of period | |
| */ | |
| __raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id)); | |
| do_div(parent_rate, div); | |
| clk->rate = parent_rate; | |
| return 0; | |
| } | |
| static int ipu_pixel_clk_enable(struct clk *clk) | |
| { | |
| u32 disp_gen = __raw_readl(IPU_DISP_GEN); | |
| disp_gen |= clk->id ? DI1_COUNTER_RELEASE : DI0_COUNTER_RELEASE; | |
| __raw_writel(disp_gen, IPU_DISP_GEN); | |
| return 0; | |
| } | |
| static void ipu_pixel_clk_disable(struct clk *clk) | |
| { | |
| u32 disp_gen = __raw_readl(IPU_DISP_GEN); | |
| disp_gen &= clk->id ? ~DI1_COUNTER_RELEASE : ~DI0_COUNTER_RELEASE; | |
| __raw_writel(disp_gen, IPU_DISP_GEN); | |
| } | |
| static int ipu_pixel_clk_set_parent(struct clk *clk, struct clk *parent) | |
| { | |
| u32 di_gen = __raw_readl(DI_GENERAL(clk->id)); | |
| if (parent == g_ipu_clk) | |
| di_gen &= ~DI_GEN_DI_CLK_EXT; | |
| else if (!IS_ERR(g_di_clk[clk->id]) && parent == g_ldb_clk) | |
| di_gen |= DI_GEN_DI_CLK_EXT; | |
| else | |
| return -EINVAL; | |
| __raw_writel(di_gen, DI_GENERAL(clk->id)); | |
| ipu_pixel_clk_recalc(clk); | |
| return 0; | |
| } | |
| static struct clk pixel_clk[] = { | |
| { | |
| .name = "pixel_clk", | |
| .id = 0, | |
| .recalc = ipu_pixel_clk_recalc, | |
| .set_rate = ipu_pixel_clk_set_rate, | |
| .round_rate = ipu_pixel_clk_round_rate, | |
| .set_parent = ipu_pixel_clk_set_parent, | |
| .enable = ipu_pixel_clk_enable, | |
| .disable = ipu_pixel_clk_disable, | |
| .usecount = 0, | |
| }, | |
| { | |
| .name = "pixel_clk", | |
| .id = 1, | |
| .recalc = ipu_pixel_clk_recalc, | |
| .set_rate = ipu_pixel_clk_set_rate, | |
| .round_rate = ipu_pixel_clk_round_rate, | |
| .set_parent = ipu_pixel_clk_set_parent, | |
| .enable = ipu_pixel_clk_enable, | |
| .disable = ipu_pixel_clk_disable, | |
| .usecount = 0, | |
| }, | |
| }; | |
| /* | |
| * This function resets IPU | |
| */ | |
| static void ipu_reset(void) | |
| { | |
| u32 *reg; | |
| u32 value; | |
| int timeout = IPU_SW_RST_TOUT_USEC; | |
| reg = (u32 *)SRC_BASE_ADDR; | |
| value = __raw_readl(reg); | |
| value = value | SW_IPU_RST; | |
| __raw_writel(value, reg); | |
| while (__raw_readl(reg) & SW_IPU_RST) { | |
| udelay(1); | |
| if (!(timeout--)) { | |
| printf("ipu software reset timeout\n"); | |
| break; | |
| } | |
| }; | |
| } | |
| /* | |
| * This function is called by the driver framework to initialize the IPU | |
| * hardware. | |
| * | |
| * @param dev The device structure for the IPU passed in by the | |
| * driver framework. | |
| * | |
| * @return Returns 0 on success or negative error code on error | |
| */ | |
| int ipu_probe(void) | |
| { | |
| unsigned long ipu_base; | |
| #if defined CONFIG_MX51 | |
| u32 temp; | |
| u32 *reg_hsc_mcd = (u32 *)MIPI_HSC_BASE_ADDR; | |
| u32 *reg_hsc_mxt_conf = (u32 *)(MIPI_HSC_BASE_ADDR + 0x800); | |
| __raw_writel(0xF00, reg_hsc_mcd); | |
| /* CSI mode reserved*/ | |
| temp = __raw_readl(reg_hsc_mxt_conf); | |
| __raw_writel(temp | 0x0FF, reg_hsc_mxt_conf); | |
| temp = __raw_readl(reg_hsc_mxt_conf); | |
| __raw_writel(temp | 0x10000, reg_hsc_mxt_conf); | |
| #endif | |
| ipu_base = IPU_CTRL_BASE_ADDR; | |
| ipu_cpmem_base = (u32 *)(ipu_base + IPU_CPMEM_REG_BASE); | |
| ipu_dc_tmpl_reg = (u32 *)(ipu_base + IPU_DC_TMPL_REG_BASE); | |
| g_pixel_clk[0] = &pixel_clk[0]; | |
| g_pixel_clk[1] = &pixel_clk[1]; | |
| g_ipu_clk = &ipu_clk; | |
| #if defined(CONFIG_MX51) | |
| g_ipu_clk->rate = IPUV3_CLK_MX51; | |
| #elif defined(CONFIG_MX53) | |
| g_ipu_clk->rate = IPUV3_CLK_MX53; | |
| #else | |
| g_ipu_clk->rate = is_mx6sdl() ? IPUV3_CLK_MX6DL : IPUV3_CLK_MX6Q; | |
| #endif | |
| debug("ipu_clk = %u\n", clk_get_rate(g_ipu_clk)); | |
| g_ldb_clk = &ldb_clk; | |
| debug("ldb_clk = %u\n", clk_get_rate(g_ldb_clk)); | |
| ipu_reset(); | |
| clk_set_parent(g_pixel_clk[0], g_ipu_clk); | |
| clk_set_parent(g_pixel_clk[1], g_ipu_clk); | |
| clk_enable(g_ipu_clk); | |
| g_di_clk[0] = NULL; | |
| g_di_clk[1] = NULL; | |
| __raw_writel(0x807FFFFF, IPU_MEM_RST); | |
| while (__raw_readl(IPU_MEM_RST) & 0x80000000) | |
| ; | |
| ipu_init_dc_mappings(); | |
| __raw_writel(0, IPU_INT_CTRL(5)); | |
| __raw_writel(0, IPU_INT_CTRL(6)); | |
| __raw_writel(0, IPU_INT_CTRL(9)); | |
| __raw_writel(0, IPU_INT_CTRL(10)); | |
| /* DMFC Init */ | |
| ipu_dmfc_init(DMFC_NORMAL, 1); | |
| /* Set sync refresh channels as high priority */ | |
| __raw_writel(0x18800000L, IDMAC_CHA_PRI(0)); | |
| /* Set MCU_T to divide MCU access window into 2 */ | |
| __raw_writel(0x00400000L | (IPU_MCU_T_DEFAULT << 18), IPU_DISP_GEN); | |
| clk_disable(g_ipu_clk); | |
| return 0; | |
| } | |
| void ipu_dump_registers(void) | |
| { | |
| debug("IPU_CONF = \t0x%08X\n", __raw_readl(IPU_CONF)); | |
| debug("IDMAC_CONF = \t0x%08X\n", __raw_readl(IDMAC_CONF)); | |
| debug("IDMAC_CHA_EN1 = \t0x%08X\n", | |
| __raw_readl(IDMAC_CHA_EN(0))); | |
| debug("IDMAC_CHA_EN2 = \t0x%08X\n", | |
| __raw_readl(IDMAC_CHA_EN(32))); | |
| debug("IDMAC_CHA_PRI1 = \t0x%08X\n", | |
| __raw_readl(IDMAC_CHA_PRI(0))); | |
| debug("IDMAC_CHA_PRI2 = \t0x%08X\n", | |
| __raw_readl(IDMAC_CHA_PRI(32))); | |
| debug("IPU_CHA_DB_MODE_SEL0 = \t0x%08X\n", | |
| __raw_readl(IPU_CHA_DB_MODE_SEL(0))); | |
| debug("IPU_CHA_DB_MODE_SEL1 = \t0x%08X\n", | |
| __raw_readl(IPU_CHA_DB_MODE_SEL(32))); | |
| debug("DMFC_WR_CHAN = \t0x%08X\n", | |
| __raw_readl(DMFC_WR_CHAN)); | |
| debug("DMFC_WR_CHAN_DEF = \t0x%08X\n", | |
| __raw_readl(DMFC_WR_CHAN_DEF)); | |
| debug("DMFC_DP_CHAN = \t0x%08X\n", | |
| __raw_readl(DMFC_DP_CHAN)); | |
| debug("DMFC_DP_CHAN_DEF = \t0x%08X\n", | |
| __raw_readl(DMFC_DP_CHAN_DEF)); | |
| debug("DMFC_IC_CTRL = \t0x%08X\n", | |
| __raw_readl(DMFC_IC_CTRL)); | |
| debug("IPU_FS_PROC_FLOW1 = \t0x%08X\n", | |
| __raw_readl(IPU_FS_PROC_FLOW1)); | |
| debug("IPU_FS_PROC_FLOW2 = \t0x%08X\n", | |
| __raw_readl(IPU_FS_PROC_FLOW2)); | |
| debug("IPU_FS_PROC_FLOW3 = \t0x%08X\n", | |
| __raw_readl(IPU_FS_PROC_FLOW3)); | |
| debug("IPU_FS_DISP_FLOW1 = \t0x%08X\n", | |
| __raw_readl(IPU_FS_DISP_FLOW1)); | |
| } | |
| /* | |
| * This function is called to initialize a logical IPU channel. | |
| * | |
| * @param channel Input parameter for the logical channel ID to init. | |
| * | |
| * @param params Input parameter containing union of channel | |
| * initialization parameters. | |
| * | |
| * @return Returns 0 on success or negative error code on fail | |
| */ | |
| int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params) | |
| { | |
| int ret = 0; | |
| uint32_t ipu_conf; | |
| debug("init channel = %d\n", IPU_CHAN_ID(channel)); | |
| if (g_ipu_clk_enabled == 0) { | |
| g_ipu_clk_enabled = 1; | |
| clk_enable(g_ipu_clk); | |
| } | |
| if (g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) { | |
| printf("Warning: channel already initialized %d\n", | |
| IPU_CHAN_ID(channel)); | |
| } | |
| ipu_conf = __raw_readl(IPU_CONF); | |
| switch (channel) { | |
| case MEM_DC_SYNC: | |
| if (params->mem_dc_sync.di > 1) { | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| g_dc_di_assignment[1] = params->mem_dc_sync.di; | |
| ipu_dc_init(1, params->mem_dc_sync.di, | |
| params->mem_dc_sync.interlaced); | |
| ipu_di_use_count[params->mem_dc_sync.di]++; | |
| ipu_dc_use_count++; | |
| ipu_dmfc_use_count++; | |
| break; | |
| case MEM_BG_SYNC: | |
| if (params->mem_dp_bg_sync.di > 1) { | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| g_dc_di_assignment[5] = params->mem_dp_bg_sync.di; | |
| ipu_dp_init(channel, params->mem_dp_bg_sync.in_pixel_fmt, | |
| params->mem_dp_bg_sync.out_pixel_fmt); | |
| ipu_dc_init(5, params->mem_dp_bg_sync.di, | |
| params->mem_dp_bg_sync.interlaced); | |
| ipu_di_use_count[params->mem_dp_bg_sync.di]++; | |
| ipu_dc_use_count++; | |
| ipu_dp_use_count++; | |
| ipu_dmfc_use_count++; | |
| break; | |
| case MEM_FG_SYNC: | |
| ipu_dp_init(channel, params->mem_dp_fg_sync.in_pixel_fmt, | |
| params->mem_dp_fg_sync.out_pixel_fmt); | |
| ipu_dc_use_count++; | |
| ipu_dp_use_count++; | |
| ipu_dmfc_use_count++; | |
| break; | |
| default: | |
| printf("Missing channel initialization\n"); | |
| break; | |
| } | |
| /* Enable IPU sub module */ | |
| g_channel_init_mask |= 1L << IPU_CHAN_ID(channel); | |
| if (ipu_dc_use_count == 1) | |
| ipu_conf |= IPU_CONF_DC_EN; | |
| if (ipu_dp_use_count == 1) | |
| ipu_conf |= IPU_CONF_DP_EN; | |
| if (ipu_dmfc_use_count == 1) | |
| ipu_conf |= IPU_CONF_DMFC_EN; | |
| if (ipu_di_use_count[0] == 1) { | |
| ipu_conf |= IPU_CONF_DI0_EN; | |
| } | |
| if (ipu_di_use_count[1] == 1) { | |
| ipu_conf |= IPU_CONF_DI1_EN; | |
| } | |
| __raw_writel(ipu_conf, IPU_CONF); | |
| err: | |
| return ret; | |
| } | |
| /* | |
| * This function is called to uninitialize a logical IPU channel. | |
| * | |
| * @param channel Input parameter for the logical channel ID to uninit. | |
| */ | |
| void ipu_uninit_channel(ipu_channel_t channel) | |
| { | |
| uint32_t reg; | |
| uint32_t in_dma, out_dma = 0; | |
| uint32_t ipu_conf; | |
| if ((g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) == 0) { | |
| debug("Channel already uninitialized %d\n", | |
| IPU_CHAN_ID(channel)); | |
| return; | |
| } | |
| /* | |
| * Make sure channel is disabled | |
| * Get input and output dma channels | |
| */ | |
| in_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); | |
| out_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); | |
| if (idma_is_set(IDMAC_CHA_EN, in_dma) || | |
| idma_is_set(IDMAC_CHA_EN, out_dma)) { | |
| printf( | |
| "Channel %d is not disabled, disable first\n", | |
| IPU_CHAN_ID(channel)); | |
| return; | |
| } | |
| ipu_conf = __raw_readl(IPU_CONF); | |
| /* Reset the double buffer */ | |
| reg = __raw_readl(IPU_CHA_DB_MODE_SEL(in_dma)); | |
| __raw_writel(reg & ~idma_mask(in_dma), IPU_CHA_DB_MODE_SEL(in_dma)); | |
| reg = __raw_readl(IPU_CHA_DB_MODE_SEL(out_dma)); | |
| __raw_writel(reg & ~idma_mask(out_dma), IPU_CHA_DB_MODE_SEL(out_dma)); | |
| switch (channel) { | |
| case MEM_DC_SYNC: | |
| ipu_dc_uninit(1); | |
| ipu_di_use_count[g_dc_di_assignment[1]]--; | |
| ipu_dc_use_count--; | |
| ipu_dmfc_use_count--; | |
| break; | |
| case MEM_BG_SYNC: | |
| ipu_dp_uninit(channel); | |
| ipu_dc_uninit(5); | |
| ipu_di_use_count[g_dc_di_assignment[5]]--; | |
| ipu_dc_use_count--; | |
| ipu_dp_use_count--; | |
| ipu_dmfc_use_count--; | |
| break; | |
| case MEM_FG_SYNC: | |
| ipu_dp_uninit(channel); | |
| ipu_dc_use_count--; | |
| ipu_dp_use_count--; | |
| ipu_dmfc_use_count--; | |
| break; | |
| default: | |
| break; | |
| } | |
| g_channel_init_mask &= ~(1L << IPU_CHAN_ID(channel)); | |
| if (ipu_dc_use_count == 0) | |
| ipu_conf &= ~IPU_CONF_DC_EN; | |
| if (ipu_dp_use_count == 0) | |
| ipu_conf &= ~IPU_CONF_DP_EN; | |
| if (ipu_dmfc_use_count == 0) | |
| ipu_conf &= ~IPU_CONF_DMFC_EN; | |
| if (ipu_di_use_count[0] == 0) { | |
| ipu_conf &= ~IPU_CONF_DI0_EN; | |
| } | |
| if (ipu_di_use_count[1] == 0) { | |
| ipu_conf &= ~IPU_CONF_DI1_EN; | |
| } | |
| __raw_writel(ipu_conf, IPU_CONF); | |
| if (ipu_conf == 0) { | |
| clk_disable(g_ipu_clk); | |
| g_ipu_clk_enabled = 0; | |
| } | |
| } | |
| static inline void ipu_ch_param_dump(int ch) | |
| { | |
| #ifdef DEBUG | |
| struct ipu_ch_param *p = ipu_ch_param_addr(ch); | |
| debug("ch %d word 0 - %08X %08X %08X %08X %08X\n", ch, | |
| p->word[0].data[0], p->word[0].data[1], p->word[0].data[2], | |
| p->word[0].data[3], p->word[0].data[4]); | |
| debug("ch %d word 1 - %08X %08X %08X %08X %08X\n", ch, | |
| p->word[1].data[0], p->word[1].data[1], p->word[1].data[2], | |
| p->word[1].data[3], p->word[1].data[4]); | |
| debug("PFS 0x%x, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 85, 4)); | |
| debug("BPP 0x%x, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 107, 3)); | |
| debug("NPB 0x%x\n", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 78, 7)); | |
| debug("FW %d, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 125, 13)); | |
| debug("FH %d, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 138, 12)); | |
| debug("Stride %d\n", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 102, 14)); | |
| debug("Width0 %d+1, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 116, 3)); | |
| debug("Width1 %d+1, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 119, 3)); | |
| debug("Width2 %d+1, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 122, 3)); | |
| debug("Width3 %d+1, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 125, 3)); | |
| debug("Offset0 %d, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 128, 5)); | |
| debug("Offset1 %d, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 133, 5)); | |
| debug("Offset2 %d, ", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 138, 5)); | |
| debug("Offset3 %d\n", | |
| ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 143, 5)); | |
| #endif | |
| } | |
| static inline void ipu_ch_params_set_packing(struct ipu_ch_param *p, | |
| int red_width, int red_offset, | |
| int green_width, int green_offset, | |
| int blue_width, int blue_offset, | |
| int alpha_width, int alpha_offset) | |
| { | |
| /* Setup red width and offset */ | |
| ipu_ch_param_set_field(p, 1, 116, 3, red_width - 1); | |
| ipu_ch_param_set_field(p, 1, 128, 5, red_offset); | |
| /* Setup green width and offset */ | |
| ipu_ch_param_set_field(p, 1, 119, 3, green_width - 1); | |
| ipu_ch_param_set_field(p, 1, 133, 5, green_offset); | |
| /* Setup blue width and offset */ | |
| ipu_ch_param_set_field(p, 1, 122, 3, blue_width - 1); | |
| ipu_ch_param_set_field(p, 1, 138, 5, blue_offset); | |
| /* Setup alpha width and offset */ | |
| ipu_ch_param_set_field(p, 1, 125, 3, alpha_width - 1); | |
| ipu_ch_param_set_field(p, 1, 143, 5, alpha_offset); | |
| } | |
| static void ipu_ch_param_init(int ch, | |
| uint32_t pixel_fmt, uint32_t width, | |
| uint32_t height, uint32_t stride, | |
| uint32_t u, uint32_t v, | |
| uint32_t uv_stride, dma_addr_t addr0, | |
| dma_addr_t addr1) | |
| { | |
| uint32_t u_offset = 0; | |
| uint32_t v_offset = 0; | |
| struct ipu_ch_param params; | |
| memset(¶ms, 0, sizeof(params)); | |
| ipu_ch_param_set_field(¶ms, 0, 125, 13, width - 1); | |
| if ((ch == 8) || (ch == 9) || (ch == 10)) { | |
| ipu_ch_param_set_field(¶ms, 0, 138, 12, (height / 2) - 1); | |
| ipu_ch_param_set_field(¶ms, 1, 102, 14, (stride * 2) - 1); | |
| } else { | |
| ipu_ch_param_set_field(¶ms, 0, 138, 12, height - 1); | |
| ipu_ch_param_set_field(¶ms, 1, 102, 14, stride - 1); | |
| } | |
| ipu_ch_param_set_field(¶ms, 1, 0, 29, addr0 >> 3); | |
| ipu_ch_param_set_field(¶ms, 1, 29, 29, addr1 >> 3); | |
| switch (pixel_fmt) { | |
| case IPU_PIX_FMT_GENERIC: | |
| /*Represents 8-bit Generic data */ | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 5); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 6); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 63); /* burst size */ | |
| break; | |
| case IPU_PIX_FMT_GENERIC_32: | |
| /*Represents 32-bit Generic data */ | |
| break; | |
| case IPU_PIX_FMT_RGB565: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ | |
| ipu_ch_params_set_packing(¶ms, 5, 0, 6, 5, 5, 11, 8, 16); | |
| break; | |
| case IPU_PIX_FMT_BGR24: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */ | |
| ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24); | |
| break; | |
| case IPU_PIX_FMT_RGB24: | |
| case IPU_PIX_FMT_YUV444: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */ | |
| ipu_ch_params_set_packing(¶ms, 8, 16, 8, 8, 8, 0, 8, 24); | |
| break; | |
| case IPU_PIX_FMT_BGRA32: | |
| case IPU_PIX_FMT_BGR32: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ | |
| ipu_ch_params_set_packing(¶ms, 8, 8, 8, 16, 8, 24, 8, 0); | |
| break; | |
| case IPU_PIX_FMT_RGBA32: | |
| case IPU_PIX_FMT_RGB32: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ | |
| ipu_ch_params_set_packing(¶ms, 8, 24, 8, 16, 8, 8, 8, 0); | |
| break; | |
| case IPU_PIX_FMT_ABGR32: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ | |
| ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24); | |
| break; | |
| case IPU_PIX_FMT_UYVY: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 0xA); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ | |
| break; | |
| case IPU_PIX_FMT_YUYV: | |
| ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 0x8); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ | |
| break; | |
| case IPU_PIX_FMT_YUV420P2: | |
| case IPU_PIX_FMT_YUV420P: | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 2); /* pix format */ | |
| if (uv_stride < stride / 2) | |
| uv_stride = stride / 2; | |
| u_offset = stride * height; | |
| v_offset = u_offset + (uv_stride * height / 2); | |
| /* burst size */ | |
| if ((ch == 8) || (ch == 9) || (ch == 10)) { | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); | |
| uv_stride = uv_stride*2; | |
| } else { | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); | |
| } | |
| break; | |
| case IPU_PIX_FMT_YVU422P: | |
| /* BPP & pixel format */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ | |
| if (uv_stride < stride / 2) | |
| uv_stride = stride / 2; | |
| v_offset = (v == 0) ? stride * height : v; | |
| u_offset = (u == 0) ? v_offset + v_offset / 2 : u; | |
| break; | |
| case IPU_PIX_FMT_YUV422P: | |
| /* BPP & pixel format */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ | |
| if (uv_stride < stride / 2) | |
| uv_stride = stride / 2; | |
| u_offset = (u == 0) ? stride * height : u; | |
| v_offset = (v == 0) ? u_offset + u_offset / 2 : v; | |
| break; | |
| case IPU_PIX_FMT_NV12: | |
| /* BPP & pixel format */ | |
| ipu_ch_param_set_field(¶ms, 1, 85, 4, 4); /* pix format */ | |
| ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ | |
| uv_stride = stride; | |
| u_offset = (u == 0) ? stride * height : u; | |
| break; | |
| default: | |
| puts("mxc ipu: unimplemented pixel format\n"); | |
| break; | |
| } | |
| if (uv_stride) | |
| ipu_ch_param_set_field(¶ms, 1, 128, 14, uv_stride - 1); | |
| /* Get the uv offset from user when need cropping */ | |
| if (u || v) { | |
| u_offset = u; | |
| v_offset = v; | |
| } | |
| /* UBO and VBO are 22-bit */ | |
| if (u_offset/8 > 0x3fffff) | |
| puts("The value of U offset exceeds IPU limitation\n"); | |
| if (v_offset/8 > 0x3fffff) | |
| puts("The value of V offset exceeds IPU limitation\n"); | |
| ipu_ch_param_set_field(¶ms, 0, 46, 22, u_offset / 8); | |
| ipu_ch_param_set_field(¶ms, 0, 68, 22, v_offset / 8); | |
| debug("initializing idma ch %d @ %p\n", ch, ipu_ch_param_addr(ch)); | |
| memcpy(ipu_ch_param_addr(ch), ¶ms, sizeof(params)); | |
| }; | |
| /* | |
| * This function is called to initialize a buffer for logical IPU channel. | |
| * | |
| * @param channel Input parameter for the logical channel ID. | |
| * | |
| * @param type Input parameter which buffer to initialize. | |
| * | |
| * @param pixel_fmt Input parameter for pixel format of buffer. | |
| * Pixel format is a FOURCC ASCII code. | |
| * | |
| * @param width Input parameter for width of buffer in pixels. | |
| * | |
| * @param height Input parameter for height of buffer in pixels. | |
| * | |
| * @param stride Input parameter for stride length of buffer | |
| * in pixels. | |
| * | |
| * @param phyaddr_0 Input parameter buffer 0 physical address. | |
| * | |
| * @param phyaddr_1 Input parameter buffer 1 physical address. | |
| * Setting this to a value other than NULL enables | |
| * double buffering mode. | |
| * | |
| * @param u private u offset for additional cropping, | |
| * zero if not used. | |
| * | |
| * @param v private v offset for additional cropping, | |
| * zero if not used. | |
| * | |
| * @return Returns 0 on success or negative error code on fail | |
| */ | |
| int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, | |
| uint32_t pixel_fmt, | |
| uint16_t width, uint16_t height, | |
| uint32_t stride, | |
| dma_addr_t phyaddr_0, dma_addr_t phyaddr_1, | |
| uint32_t u, uint32_t v) | |
| { | |
| uint32_t reg; | |
| uint32_t dma_chan; | |
| dma_chan = channel_2_dma(channel, type); | |
| if (!idma_is_valid(dma_chan)) | |
| return -EINVAL; | |
| if (stride < width * bytes_per_pixel(pixel_fmt)) | |
| stride = width * bytes_per_pixel(pixel_fmt); | |
| if (stride % 4) { | |
| printf( | |
| "Stride not 32-bit aligned, stride = %d\n", stride); | |
| return -EINVAL; | |
| } | |
| /* Build parameter memory data for DMA channel */ | |
| ipu_ch_param_init(dma_chan, pixel_fmt, width, height, stride, u, v, 0, | |
| phyaddr_0, phyaddr_1); | |
| if (ipu_is_dmfc_chan(dma_chan)) { | |
| ipu_dmfc_set_wait4eot(dma_chan, width); | |
| } | |
| if (idma_is_set(IDMAC_CHA_PRI, dma_chan)) | |
| ipu_ch_param_set_high_priority(dma_chan); | |
| ipu_ch_param_dump(dma_chan); | |
| reg = __raw_readl(IPU_CHA_DB_MODE_SEL(dma_chan)); | |
| if (phyaddr_1) | |
| reg |= idma_mask(dma_chan); | |
| else | |
| reg &= ~idma_mask(dma_chan); | |
| __raw_writel(reg, IPU_CHA_DB_MODE_SEL(dma_chan)); | |
| /* Reset to buffer 0 */ | |
| __raw_writel(idma_mask(dma_chan), IPU_CHA_CUR_BUF(dma_chan)); | |
| return 0; | |
| } | |
| /* | |
| * This function enables a logical channel. | |
| * | |
| * @param channel Input parameter for the logical channel ID. | |
| * | |
| * @return This function returns 0 on success or negative error code on | |
| * fail. | |
| */ | |
| int32_t ipu_enable_channel(ipu_channel_t channel) | |
| { | |
| uint32_t reg; | |
| uint32_t in_dma; | |
| uint32_t out_dma; | |
| if (g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) { | |
| printf("Warning: channel already enabled %d\n", | |
| IPU_CHAN_ID(channel)); | |
| } | |
| /* Get input and output dma channels */ | |
| out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); | |
| in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); | |
| if (idma_is_valid(in_dma)) { | |
| reg = __raw_readl(IDMAC_CHA_EN(in_dma)); | |
| __raw_writel(reg | idma_mask(in_dma), IDMAC_CHA_EN(in_dma)); | |
| } | |
| if (idma_is_valid(out_dma)) { | |
| reg = __raw_readl(IDMAC_CHA_EN(out_dma)); | |
| __raw_writel(reg | idma_mask(out_dma), IDMAC_CHA_EN(out_dma)); | |
| } | |
| if ((channel == MEM_DC_SYNC) || (channel == MEM_BG_SYNC) || | |
| (channel == MEM_FG_SYNC)) | |
| ipu_dp_dc_enable(channel); | |
| g_channel_enable_mask |= 1L << IPU_CHAN_ID(channel); | |
| return 0; | |
| } | |
| /* | |
| * This function clear buffer ready for a logical channel. | |
| * | |
| * @param channel Input parameter for the logical channel ID. | |
| * | |
| * @param type Input parameter which buffer to clear. | |
| * | |
| * @param bufNum Input parameter for which buffer number clear | |
| * ready state. | |
| * | |
| */ | |
| void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type, | |
| uint32_t bufNum) | |
| { | |
| uint32_t dma_ch = channel_2_dma(channel, type); | |
| if (!idma_is_valid(dma_ch)) | |
| return; | |
| __raw_writel(0xF0000000, IPU_GPR); /* write one to clear */ | |
| if (bufNum == 0) { | |
| if (idma_is_set(IPU_CHA_BUF0_RDY, dma_ch)) { | |
| __raw_writel(idma_mask(dma_ch), | |
| IPU_CHA_BUF0_RDY(dma_ch)); | |
| } | |
| } else { | |
| if (idma_is_set(IPU_CHA_BUF1_RDY, dma_ch)) { | |
| __raw_writel(idma_mask(dma_ch), | |
| IPU_CHA_BUF1_RDY(dma_ch)); | |
| } | |
| } | |
| __raw_writel(0x0, IPU_GPR); /* write one to set */ | |
| } | |
| /* | |
| * This function disables a logical channel. | |
| * | |
| * @param channel Input parameter for the logical channel ID. | |
| * | |
| * @param wait_for_stop Flag to set whether to wait for channel end | |
| * of frame or return immediately. | |
| * | |
| * @return This function returns 0 on success or negative error code on | |
| * fail. | |
| */ | |
| int32_t ipu_disable_channel(ipu_channel_t channel) | |
| { | |
| uint32_t reg; | |
| uint32_t in_dma; | |
| uint32_t out_dma; | |
| if ((g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) == 0) { | |
| debug("Channel already disabled %d\n", | |
| IPU_CHAN_ID(channel)); | |
| return 0; | |
| } | |
| /* Get input and output dma channels */ | |
| out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); | |
| in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); | |
| if ((idma_is_valid(in_dma) && | |
| !idma_is_set(IDMAC_CHA_EN, in_dma)) | |
| && (idma_is_valid(out_dma) && | |
| !idma_is_set(IDMAC_CHA_EN, out_dma))) | |
| return -EINVAL; | |
| if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC) || | |
| (channel == MEM_DC_SYNC)) { | |
| ipu_dp_dc_disable(channel, 0); | |
| } | |
| /* Disable DMA channel(s) */ | |
| if (idma_is_valid(in_dma)) { | |
| reg = __raw_readl(IDMAC_CHA_EN(in_dma)); | |
| __raw_writel(reg & ~idma_mask(in_dma), IDMAC_CHA_EN(in_dma)); | |
| __raw_writel(idma_mask(in_dma), IPU_CHA_CUR_BUF(in_dma)); | |
| } | |
| if (idma_is_valid(out_dma)) { | |
| reg = __raw_readl(IDMAC_CHA_EN(out_dma)); | |
| __raw_writel(reg & ~idma_mask(out_dma), IDMAC_CHA_EN(out_dma)); | |
| __raw_writel(idma_mask(out_dma), IPU_CHA_CUR_BUF(out_dma)); | |
| } | |
| g_channel_enable_mask &= ~(1L << IPU_CHAN_ID(channel)); | |
| /* Set channel buffers NOT to be ready */ | |
| if (idma_is_valid(in_dma)) { | |
| ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 0); | |
| ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 1); | |
| } | |
| if (idma_is_valid(out_dma)) { | |
| ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 0); | |
| ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 1); | |
| } | |
| return 0; | |
| } | |
| uint32_t bytes_per_pixel(uint32_t fmt) | |
| { | |
| switch (fmt) { | |
| case IPU_PIX_FMT_GENERIC: /*generic data */ | |
| case IPU_PIX_FMT_RGB332: | |
| case IPU_PIX_FMT_YUV420P: | |
| case IPU_PIX_FMT_YUV422P: | |
| return 1; | |
| break; | |
| case IPU_PIX_FMT_RGB565: | |
| case IPU_PIX_FMT_YUYV: | |
| case IPU_PIX_FMT_UYVY: | |
| return 2; | |
| break; | |
| case IPU_PIX_FMT_BGR24: | |
| case IPU_PIX_FMT_RGB24: | |
| return 3; | |
| break; | |
| case IPU_PIX_FMT_GENERIC_32: /*generic data */ | |
| case IPU_PIX_FMT_BGR32: | |
| case IPU_PIX_FMT_BGRA32: | |
| case IPU_PIX_FMT_RGB32: | |
| case IPU_PIX_FMT_RGBA32: | |
| case IPU_PIX_FMT_ABGR32: | |
| return 4; | |
| break; | |
| default: | |
| return 1; | |
| break; | |
| } | |
| return 0; | |
| } | |
| ipu_color_space_t format_to_colorspace(uint32_t fmt) | |
| { | |
| switch (fmt) { | |
| case IPU_PIX_FMT_RGB666: | |
| case IPU_PIX_FMT_RGB565: | |
| case IPU_PIX_FMT_BGR24: | |
| case IPU_PIX_FMT_RGB24: | |
| case IPU_PIX_FMT_BGR32: | |
| case IPU_PIX_FMT_BGRA32: | |
| case IPU_PIX_FMT_RGB32: | |
| case IPU_PIX_FMT_RGBA32: | |
| case IPU_PIX_FMT_ABGR32: | |
| case IPU_PIX_FMT_LVDS666: | |
| case IPU_PIX_FMT_LVDS888: | |
| return RGB; | |
| break; | |
| default: | |
| return YCbCr; | |
| break; | |
| } | |
| return RGB; | |
| } | |
| /* should be removed when clk framework is availiable */ | |
| int ipu_set_ldb_clock(int rate) | |
| { | |
| ldb_clk.rate = rate; | |
| return 0; | |
| } | |
| bool ipu_clk_enabled(void) | |
| { | |
| return g_ipu_clk_enabled; | |
| } |