| /* | |
| * Copyright (C) 2014 Stefan Roese <sr@denx.de> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef _CONFIG_SYNOLOGY_DS414_H | |
| #define _CONFIG_SYNOLOGY_DS414_H | |
| /* | |
| * High Level Configuration Options (easy to change) | |
| */ | |
| #define CONFIG_DISPLAY_BOARDINFO_LATE | |
| /* | |
| * TEXT_BASE needs to be below 16MiB, since this area is scrubbed | |
| * for DDR ECC byte filling in the SPL before loading the main | |
| * U-Boot into it. | |
| */ | |
| #define CONFIG_SYS_TEXT_BASE 0x00800000 | |
| #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ | |
| /* | |
| * Commands configuration | |
| */ | |
| /* I2C */ | |
| #define CONFIG_SYS_I2C | |
| #define CONFIG_SYS_I2C_MVTWSI | |
| #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE | |
| #define CONFIG_SYS_I2C_SLAVE 0x0 | |
| #define CONFIG_SYS_I2C_SPEED 100000 | |
| /* SPI NOR flash default params, used by sf commands */ | |
| #define CONFIG_SF_DEFAULT_SPEED 1000000 | |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 | |
| /* Environment in SPI NOR flash */ | |
| #define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */ | |
| #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ | |
| #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ | |
| #define CONFIG_PHY_MARVELL /* there is a marvell phy */ | |
| #define CONFIG_PHY_ADDR { 0x1, 0x0 } | |
| #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII | |
| #define CONFIG_SYS_ALT_MEMTEST | |
| /* PCIe support */ | |
| #ifndef CONFIG_SPL_BUILD | |
| #define CONFIG_PCI_MVEBU | |
| #define CONFIG_PCI_SCAN_SHOW | |
| #endif | |
| /* USB/EHCI/XHCI configuration */ | |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 | |
| /* FIXME: broken XHCI support | |
| * Below defines should enable support for the two rear USB3 ports. Sadly, this | |
| * does not work because: | |
| * - xhci-pci seems to not support DM_USB, so with that enabled it is not | |
| * found. | |
| * - USB init fails, controller does not respond in time */ | |
| #if !defined(CONFIG_USB_XHCI_HCD) | |
| #define CONFIG_EHCI_IS_TDI | |
| #endif | |
| /* why is this only defined in mv-common.h if CONFIG_DM is undefined? */ | |
| #define CONFIG_SUPPORT_VFAT | |
| #define CONFIG_SYS_MVFS | |
| /* | |
| * mv-common.h should be defined after CMD configs since it used them | |
| * to enable certain macros | |
| */ | |
| #include "mv-common.h" | |
| /* | |
| * Memory layout while starting into the bin_hdr via the | |
| * BootROM: | |
| * | |
| * 0x4000.4000 - 0x4003.4000 headers space (192KiB) | |
| * 0x4000.4030 bin_hdr start address | |
| * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) | |
| * 0x4007.fffc BootROM stack top | |
| * | |
| * The address space between 0x4007.fffc and 0x400f.fff is not locked in | |
| * L2 cache thus cannot be used. | |
| */ | |
| /* SPL */ | |
| /* Defines for SPL */ | |
| #define CONFIG_SPL_FRAMEWORK | |
| #define CONFIG_SPL_TEXT_BASE 0x40004030 | |
| #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) | |
| #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) | |
| #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) | |
| #ifdef CONFIG_SPL_BUILD | |
| #define CONFIG_SYS_MALLOC_SIMPLE | |
| #endif | |
| #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) | |
| #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) | |
| /* SPL related SPI defines */ | |
| #define CONFIG_SPL_SPI_LOAD | |
| #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 | |
| /* DS414 bus width is 32bits */ | |
| #define CONFIG_DDR_32BIT | |
| /* Use random ethernet address if not configured */ | |
| #define CONFIG_LIB_RAND | |
| #define CONFIG_NET_RANDOM_ETHADDR | |
| /* Default Environment */ | |
| #define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm" | |
| #define CONFIG_LOADADDR 0x80000 | |
| #undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */ | |
| #define CONFIG_PREBOOT "usb start; sf probe" | |
| #endif /* _CONFIG_SYNOLOGY_DS414_H */ |