| /* | |
| * (C) Copyright 2010 | |
| * Marvell Semiconductor <www.marvell.com> | |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| /* | |
| * This file contains Marvell Board Specific common defincations. | |
| * This file should be included in board config header file. | |
| * | |
| * It supports common definations for Kirkwood platform | |
| * TBD: support for Orion5X platforms | |
| */ | |
| #ifndef _MV_COMMON_H | |
| #define _MV_COMMON_H | |
| /* | |
| * High Level Configuration Options (easy to change) | |
| */ | |
| #define CONFIG_MARVELL 1 | |
| /* | |
| * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h | |
| */ | |
| #ifndef CONFIG_SYS_TEXT_BASE | |
| #define CONFIG_SYS_TEXT_BASE 0x00600000 | |
| #endif /* CONFIG_SYS_TEXT_BASE */ | |
| /* additions for new ARM relocation support */ | |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 | |
| /* | |
| * CLKs configurations | |
| */ | |
| /* | |
| * NS16550 Configuration | |
| */ | |
| #define CONFIG_SYS_NS16550_SERIAL | |
| #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK | |
| #if !defined(CONFIG_DM_SERIAL) | |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) | |
| #define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE | |
| #endif | |
| /* | |
| * Serial Port configuration | |
| * The following definitions let you select what serial you want to use | |
| * for your console driver. | |
| */ | |
| #define CONFIG_CONS_INDEX 1 /*Console on UART0 */ | |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ | |
| 115200,230400, 460800, 921600 } | |
| /* auto boot */ | |
| #define CONFIG_PREBOOT | |
| /* | |
| * For booting Linux, the board info and command line data | |
| * have to be in the first 8 MB of memory, since this is | |
| * the maximum mapped by the Linux kernel during initialization. | |
| */ | |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
| #define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ | |
| #define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ | |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ | |
| /* | |
| * Size of malloc() pool | |
| */ | |
| #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 * 4) /* 4MiB for malloc() */ | |
| /* | |
| * Other required minimal configurations | |
| */ | |
| #define CONFIG_SYS_LONGHELP | |
| #define CONFIG_AUTO_COMPLETE | |
| #define CONFIG_CMDLINE_EDITING | |
| #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ | |
| #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ | |
| #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ | |
| #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ | |
| #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ | |
| #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ | |
| /* ====> Include platform Common Definitions */ | |
| #include <asm/arch/config.h> | |
| /* | |
| * DRAM Banks configuration, Custom config can be done in <board>.h | |
| */ | |
| #ifndef CONFIG_NR_DRAM_BANKS | |
| #define CONFIG_NR_DRAM_BANKS CONFIG_NR_DRAM_BANKS_MAX | |
| #else | |
| #if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX) | |
| #error CONFIG_NR_DRAM_BANKS Configurated more than available | |
| #endif | |
| #endif /* CONFIG_NR_DRAM_BANKS */ | |
| /* ====> Include driver Common Definitions */ | |
| /* | |
| * Common NAND configuration | |
| */ | |
| #ifdef CONFIG_CMD_NAND | |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| #endif | |
| /* | |
| * Common SPI Flash configuration | |
| */ | |
| #ifdef CONFIG_CMD_SF | |
| #endif | |
| /* | |
| * Common USB/EHCI configuration | |
| */ | |
| #if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM) | |
| #define CONFIG_SUPPORT_VFAT | |
| #endif /* CONFIG_CMD_USB */ | |
| /* | |
| * File system | |
| */ | |
| #ifdef CONFIG_SYS_MVFS | |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ | |
| #define CONFIG_MTD_PARTITIONS | |
| #endif | |
| #endif /* _MV_COMMON_H */ |