| /* | |
| * (C) Copyright 2001-2015 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * Joe Hershberger, National Instruments | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <dm.h> | |
| #include <environment.h> | |
| #include <net.h> | |
| #include <dm/device-internal.h> | |
| #include <dm/uclass-internal.h> | |
| #include "eth_internal.h" | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /** | |
| * struct eth_device_priv - private structure for each Ethernet device | |
| * | |
| * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t) | |
| */ | |
| struct eth_device_priv { | |
| enum eth_state_t state; | |
| }; | |
| /** | |
| * struct eth_uclass_priv - The structure attached to the uclass itself | |
| * | |
| * @current: The Ethernet device that the network functions are using | |
| */ | |
| struct eth_uclass_priv { | |
| struct udevice *current; | |
| }; | |
| /* eth_errno - This stores the most recent failure code from DM functions */ | |
| static int eth_errno; | |
| static struct eth_uclass_priv *eth_get_uclass_priv(void) | |
| { | |
| struct uclass *uc; | |
| uclass_get(UCLASS_ETH, &uc); | |
| assert(uc); | |
| return uc->priv; | |
| } | |
| void eth_set_current_to_next(void) | |
| { | |
| struct eth_uclass_priv *uc_priv; | |
| uc_priv = eth_get_uclass_priv(); | |
| if (uc_priv->current) | |
| uclass_next_device(&uc_priv->current); | |
| if (!uc_priv->current) | |
| uclass_first_device(UCLASS_ETH, &uc_priv->current); | |
| } | |
| /* | |
| * Typically this will simply return the active device. | |
| * In the case where the most recent active device was unset, this will attempt | |
| * to return the first device. If that device doesn't exist or fails to probe, | |
| * this function will return NULL. | |
| */ | |
| struct udevice *eth_get_dev(void) | |
| { | |
| struct eth_uclass_priv *uc_priv; | |
| uc_priv = eth_get_uclass_priv(); | |
| if (!uc_priv->current) | |
| eth_errno = uclass_first_device(UCLASS_ETH, | |
| &uc_priv->current); | |
| return uc_priv->current; | |
| } | |
| /* | |
| * Typically this will just store a device pointer. | |
| * In case it was not probed, we will attempt to do so. | |
| * dev may be NULL to unset the active device. | |
| */ | |
| void eth_set_dev(struct udevice *dev) | |
| { | |
| if (dev && !device_active(dev)) { | |
| eth_errno = device_probe(dev); | |
| if (eth_errno) | |
| dev = NULL; | |
| } | |
| eth_get_uclass_priv()->current = dev; | |
| } | |
| /* | |
| * Find the udevice that either has the name passed in as devname or has an | |
| * alias named devname. | |
| */ | |
| struct udevice *eth_get_dev_by_name(const char *devname) | |
| { | |
| int seq = -1; | |
| char *endp = NULL; | |
| const char *startp = NULL; | |
| struct udevice *it; | |
| struct uclass *uc; | |
| int len = strlen("eth"); | |
| /* Must be longer than 3 to be an alias */ | |
| if (!strncmp(devname, "eth", len) && strlen(devname) > len) { | |
| startp = devname + len; | |
| seq = simple_strtoul(startp, &endp, 10); | |
| } | |
| uclass_get(UCLASS_ETH, &uc); | |
| uclass_foreach_dev(it, uc) { | |
| /* | |
| * We need the seq to be valid, so try to probe it. | |
| * If the probe fails, the seq will not match since it will be | |
| * -1 instead of what we are looking for. | |
| * We don't care about errors from probe here. Either they won't | |
| * match an alias or it will match a literal name and we'll pick | |
| * up the error when we try to probe again in eth_set_dev(). | |
| */ | |
| if (device_probe(it)) | |
| continue; | |
| /* Check for the name or the sequence number to match */ | |
| if (strcmp(it->name, devname) == 0 || | |
| (endp > startp && it->seq == seq)) | |
| return it; | |
| } | |
| return NULL; | |
| } | |
| unsigned char *eth_get_ethaddr(void) | |
| { | |
| struct eth_pdata *pdata; | |
| if (eth_get_dev()) { | |
| pdata = eth_get_dev()->platdata; | |
| return pdata->enetaddr; | |
| } | |
| return NULL; | |
| } | |
| /* Set active state without calling start on the driver */ | |
| int eth_init_state_only(void) | |
| { | |
| struct udevice *current; | |
| struct eth_device_priv *priv; | |
| current = eth_get_dev(); | |
| if (!current || !device_active(current)) | |
| return -EINVAL; | |
| priv = current->uclass_priv; | |
| priv->state = ETH_STATE_ACTIVE; | |
| return 0; | |
| } | |
| /* Set passive state without calling stop on the driver */ | |
| void eth_halt_state_only(void) | |
| { | |
| struct udevice *current; | |
| struct eth_device_priv *priv; | |
| current = eth_get_dev(); | |
| if (!current || !device_active(current)) | |
| return; | |
| priv = current->uclass_priv; | |
| priv->state = ETH_STATE_PASSIVE; | |
| } | |
| int eth_get_dev_index(void) | |
| { | |
| if (eth_get_dev()) | |
| return eth_get_dev()->seq; | |
| return -1; | |
| } | |
| static int eth_write_hwaddr(struct udevice *dev) | |
| { | |
| struct eth_pdata *pdata; | |
| int ret = 0; | |
| if (!dev || !device_active(dev)) | |
| return -EINVAL; | |
| /* seq is valid since the device is active */ | |
| if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) { | |
| pdata = dev->platdata; | |
| if (!is_valid_ethaddr(pdata->enetaddr)) { | |
| printf("\nError: %s address %pM illegal value\n", | |
| dev->name, pdata->enetaddr); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Drivers are allowed to decide not to implement this at | |
| * run-time. E.g. Some devices may use it and some may not. | |
| */ | |
| ret = eth_get_ops(dev)->write_hwaddr(dev); | |
| if (ret == -ENOSYS) | |
| ret = 0; | |
| if (ret) | |
| printf("\nWarning: %s failed to set MAC address\n", | |
| dev->name); | |
| } | |
| return ret; | |
| } | |
| static int on_ethaddr(const char *name, const char *value, enum env_op op, | |
| int flags) | |
| { | |
| int index; | |
| int retval; | |
| struct udevice *dev; | |
| /* look for an index after "eth" */ | |
| index = simple_strtoul(name + 3, NULL, 10); | |
| retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev); | |
| if (!retval) { | |
| struct eth_pdata *pdata = dev->platdata; | |
| switch (op) { | |
| case env_op_create: | |
| case env_op_overwrite: | |
| eth_parse_enetaddr(value, pdata->enetaddr); | |
| eth_write_hwaddr(dev); | |
| break; | |
| case env_op_delete: | |
| memset(pdata->enetaddr, 0, ARP_HLEN); | |
| } | |
| } | |
| return 0; | |
| } | |
| U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr); | |
| int eth_init(void) | |
| { | |
| char *ethact = env_get("ethact"); | |
| char *ethrotate = env_get("ethrotate"); | |
| struct udevice *current = NULL; | |
| struct udevice *old_current; | |
| int ret = -ENODEV; | |
| /* | |
| * When 'ethrotate' variable is set to 'no' and 'ethact' variable | |
| * is already set to an ethernet device, we should stick to 'ethact'. | |
| */ | |
| if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) { | |
| if (ethact) { | |
| current = eth_get_dev_by_name(ethact); | |
| if (!current) | |
| return -EINVAL; | |
| } | |
| } | |
| if (!current) { | |
| current = eth_get_dev(); | |
| if (!current) { | |
| printf("No ethernet found.\n"); | |
| return -ENODEV; | |
| } | |
| } | |
| old_current = current; | |
| do { | |
| if (current) { | |
| debug("Trying %s\n", current->name); | |
| if (device_active(current)) { | |
| ret = eth_get_ops(current)->start(current); | |
| if (ret >= 0) { | |
| struct eth_device_priv *priv = | |
| current->uclass_priv; | |
| priv->state = ETH_STATE_ACTIVE; | |
| return 0; | |
| } | |
| } else { | |
| ret = eth_errno; | |
| } | |
| debug("FAIL\n"); | |
| } else { | |
| debug("PROBE FAIL\n"); | |
| } | |
| /* | |
| * If ethrotate is enabled, this will change "current", | |
| * otherwise we will drop out of this while loop immediately | |
| */ | |
| eth_try_another(0); | |
| /* This will ensure the new "current" attempted to probe */ | |
| current = eth_get_dev(); | |
| } while (old_current != current); | |
| return ret; | |
| } | |
| void eth_halt(void) | |
| { | |
| struct udevice *current; | |
| struct eth_device_priv *priv; | |
| current = eth_get_dev(); | |
| if (!current || !device_active(current)) | |
| return; | |
| eth_get_ops(current)->stop(current); | |
| priv = current->uclass_priv; | |
| priv->state = ETH_STATE_PASSIVE; | |
| } | |
| int eth_is_active(struct udevice *dev) | |
| { | |
| struct eth_device_priv *priv; | |
| if (!dev || !device_active(dev)) | |
| return 0; | |
| priv = dev_get_uclass_priv(dev); | |
| return priv->state == ETH_STATE_ACTIVE; | |
| } | |
| int eth_send(void *packet, int length) | |
| { | |
| struct udevice *current; | |
| int ret; | |
| current = eth_get_dev(); | |
| if (!current) | |
| return -ENODEV; | |
| if (!device_active(current)) | |
| return -EINVAL; | |
| ret = eth_get_ops(current)->send(current, packet, length); | |
| if (ret < 0) { | |
| /* We cannot completely return the error at present */ | |
| debug("%s: send() returned error %d\n", __func__, ret); | |
| } | |
| return ret; | |
| } | |
| int eth_rx(void) | |
| { | |
| struct udevice *current; | |
| uchar *packet; | |
| int flags; | |
| int ret; | |
| int i; | |
| current = eth_get_dev(); | |
| if (!current) | |
| return -ENODEV; | |
| if (!device_active(current)) | |
| return -EINVAL; | |
| /* Process up to 32 packets at one time */ | |
| flags = ETH_RECV_CHECK_DEVICE; | |
| for (i = 0; i < 32; i++) { | |
| ret = eth_get_ops(current)->recv(current, flags, &packet); | |
| flags = 0; | |
| if (ret > 0) | |
| net_process_received_packet(packet, ret); | |
| if (ret >= 0 && eth_get_ops(current)->free_pkt) | |
| eth_get_ops(current)->free_pkt(current, packet, ret); | |
| if (ret <= 0) | |
| break; | |
| } | |
| if (ret == -EAGAIN) | |
| ret = 0; | |
| if (ret < 0) { | |
| /* We cannot completely return the error at present */ | |
| debug("%s: recv() returned error %d\n", __func__, ret); | |
| } | |
| return ret; | |
| } | |
| int eth_initialize(void) | |
| { | |
| int num_devices = 0; | |
| struct udevice *dev; | |
| eth_common_init(); | |
| /* | |
| * Devices need to write the hwaddr even if not started so that Linux | |
| * will have access to the hwaddr that u-boot stored for the device. | |
| * This is accomplished by attempting to probe each device and calling | |
| * their write_hwaddr() operation. | |
| */ | |
| uclass_first_device(UCLASS_ETH, &dev); | |
| if (!dev) { | |
| printf("No ethernet found.\n"); | |
| bootstage_error(BOOTSTAGE_ID_NET_ETH_START); | |
| } else { | |
| char *ethprime = env_get("ethprime"); | |
| struct udevice *prime_dev = NULL; | |
| if (ethprime) | |
| prime_dev = eth_get_dev_by_name(ethprime); | |
| if (prime_dev) { | |
| eth_set_dev(prime_dev); | |
| eth_current_changed(); | |
| } else { | |
| eth_set_dev(NULL); | |
| } | |
| bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT); | |
| do { | |
| if (num_devices) | |
| printf(", "); | |
| printf("eth%d: %s", dev->seq, dev->name); | |
| if (ethprime && dev == prime_dev) | |
| printf(" [PRIME]"); | |
| eth_write_hwaddr(dev); | |
| uclass_next_device(&dev); | |
| num_devices++; | |
| } while (dev); | |
| putc('\n'); | |
| } | |
| return num_devices; | |
| } | |
| static int eth_post_bind(struct udevice *dev) | |
| { | |
| if (strchr(dev->name, ' ')) { | |
| printf("\nError: eth device name \"%s\" has a space!\n", | |
| dev->name); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int eth_pre_unbind(struct udevice *dev) | |
| { | |
| /* Don't hang onto a pointer that is going away */ | |
| if (dev == eth_get_uclass_priv()->current) | |
| eth_set_dev(NULL); | |
| return 0; | |
| } | |
| static int eth_post_probe(struct udevice *dev) | |
| { | |
| struct eth_device_priv *priv = dev->uclass_priv; | |
| struct eth_pdata *pdata = dev->platdata; | |
| unsigned char env_enetaddr[ARP_HLEN]; | |
| #if defined(CONFIG_NEEDS_MANUAL_RELOC) | |
| struct eth_ops *ops = eth_get_ops(dev); | |
| static int reloc_done; | |
| if (!reloc_done) { | |
| if (ops->start) | |
| ops->start += gd->reloc_off; | |
| if (ops->send) | |
| ops->send += gd->reloc_off; | |
| if (ops->recv) | |
| ops->recv += gd->reloc_off; | |
| if (ops->free_pkt) | |
| ops->free_pkt += gd->reloc_off; | |
| if (ops->stop) | |
| ops->stop += gd->reloc_off; | |
| #ifdef CONFIG_MCAST_TFTP | |
| if (ops->mcast) | |
| ops->mcast += gd->reloc_off; | |
| #endif | |
| if (ops->write_hwaddr) | |
| ops->write_hwaddr += gd->reloc_off; | |
| if (ops->read_rom_hwaddr) | |
| ops->read_rom_hwaddr += gd->reloc_off; | |
| reloc_done++; | |
| } | |
| #endif | |
| priv->state = ETH_STATE_INIT; | |
| /* Check if the device has a MAC address in ROM */ | |
| if (eth_get_ops(dev)->read_rom_hwaddr) | |
| eth_get_ops(dev)->read_rom_hwaddr(dev); | |
| eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr); | |
| if (!is_zero_ethaddr(env_enetaddr)) { | |
| if (!is_zero_ethaddr(pdata->enetaddr) && | |
| memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) { | |
| printf("\nWarning: %s MAC addresses don't match:\n", | |
| dev->name); | |
| printf("Address in ROM is %pM\n", | |
| pdata->enetaddr); | |
| printf("Address in environment is %pM\n", | |
| env_enetaddr); | |
| } | |
| /* Override the ROM MAC address */ | |
| memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN); | |
| } else if (is_valid_ethaddr(pdata->enetaddr)) { | |
| eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr); | |
| printf("\nWarning: %s using MAC address from ROM\n", | |
| dev->name); | |
| } else if (is_zero_ethaddr(pdata->enetaddr) || | |
| !is_valid_ethaddr(pdata->enetaddr)) { | |
| #ifdef CONFIG_NET_RANDOM_ETHADDR | |
| net_random_ethaddr(pdata->enetaddr); | |
| printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", | |
| dev->name, dev->seq, pdata->enetaddr); | |
| #else | |
| printf("\nError: %s address not set.\n", | |
| dev->name); | |
| return -EINVAL; | |
| #endif | |
| } | |
| return 0; | |
| } | |
| static int eth_pre_remove(struct udevice *dev) | |
| { | |
| struct eth_pdata *pdata = dev->platdata; | |
| eth_get_ops(dev)->stop(dev); | |
| /* clear the MAC address */ | |
| memset(pdata->enetaddr, 0, ARP_HLEN); | |
| return 0; | |
| } | |
| UCLASS_DRIVER(eth) = { | |
| .name = "eth", | |
| .id = UCLASS_ETH, | |
| .post_bind = eth_post_bind, | |
| .pre_unbind = eth_pre_unbind, | |
| .post_probe = eth_post_probe, | |
| .pre_remove = eth_pre_remove, | |
| .priv_auto_alloc_size = sizeof(struct eth_uclass_priv), | |
| .per_device_auto_alloc_size = sizeof(struct eth_device_priv), | |
| .flags = DM_UC_FLAG_SEQ_ALIAS, | |
| }; |