| CONFIG_ARM=y | |
| CONFIG_SPL_SYS_ICACHE_OFF=y | |
| CONFIG_SPL_SYS_DCACHE_OFF=y | |
| CONFIG_ARCH_CPU_INIT=y | |
| CONFIG_SYS_THUMB_BUILD=y | |
| # CONFIG_SPL_USE_ARCH_MEMCPY is not set | |
| # CONFIG_SPL_USE_ARCH_MEMSET is not set | |
| CONFIG_ARCH_AT91=y | |
| CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds" | |
| CONFIG_SYS_TEXT_BASE=0x21000000 | |
| CONFIG_TARGET_TAURUS=y | |
| CONFIG_BOARD_TAURUS=y | |
| CONFIG_SPL_GPIO_SUPPORT=y | |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y | |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y | |
| CONFIG_SYS_MALLOC_F_LEN=0x2000 | |
| CONFIG_ENV_OFFSET=0x100000 | |
| CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000 | |
| CONFIG_NR_DRAM_BANKS=1 | |
| CONFIG_SPL=y | |
| CONFIG_DEBUG_UART_BASE=0xfffff200 | |
| CONFIG_DEBUG_UART_CLOCK=18432000 | |
| CONFIG_SPL_SPI_FLASH_SUPPORT=y | |
| CONFIG_SPL_SPI_SUPPORT=y | |
| CONFIG_DEBUG_UART=y | |
| CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067" | |
| CONFIG_BOOTDELAY=3 | |
| CONFIG_USE_BOOTARGS=y | |
| CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" | |
| CONFIG_USE_BOOTCOMMAND=y | |
| CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" | |
| # CONFIG_DISPLAY_BOARDINFO is not set | |
| CONFIG_BOARD_EARLY_INIT_F=y | |
| # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set | |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y | |
| CONFIG_SPL_CRC32_SUPPORT=y | |
| CONFIG_SPL_NAND_SUPPORT=y | |
| CONFIG_HUSH_PARSER=y | |
| CONFIG_SYS_PROMPT="U-Boot> " | |
| CONFIG_SYS_XTRACE="n" | |
| # CONFIG_CMD_BDI is not set | |
| CONFIG_CMD_BOOTZ=y | |
| # CONFIG_CMD_IMI is not set | |
| CONFIG_CMD_DFU=y | |
| # CONFIG_CMD_LOADS is not set | |
| CONFIG_CMD_NAND=y | |
| # CONFIG_CMD_PINMUX is not set | |
| CONFIG_CMD_SPI=y | |
| CONFIG_CMD_USB=y | |
| # CONFIG_CMD_SOURCE is not set | |
| # CONFIG_CMD_SETEXPR is not set | |
| CONFIG_CMD_DHCP=y | |
| CONFIG_CMD_PING=y | |
| CONFIG_CMD_MTDPARTS=y | |
| # CONFIG_DOS_PARTITION is not set | |
| CONFIG_OF_CONTROL=y | |
| CONFIG_SPL_OF_CONTROL=y | |
| CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" | |
| CONFIG_SPL_OF_PLATDATA=y | |
| CONFIG_ENV_IS_IN_NAND=y | |
| CONFIG_SYS_REDUNDAND_ENVIRONMENT=y | |
| CONFIG_ENV_OFFSET_REDUND=0x180000 | |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y | |
| CONFIG_SPL_DM=y | |
| CONFIG_BLK=y | |
| CONFIG_CLK=y | |
| CONFIG_CLK_AT91=y | |
| CONFIG_DFU_NAND=y | |
| # CONFIG_MMC is not set | |
| CONFIG_NAND=y | |
| # CONFIG_SYS_NAND_USE_FLASH_BBT is not set | |
| CONFIG_NAND_ATMEL=y | |
| CONFIG_DM_SPI_FLASH=y | |
| CONFIG_SPI_FLASH_STMICRO=y | |
| CONFIG_PHYLIB=y | |
| CONFIG_PINCTRL=y | |
| CONFIG_PINCTRL_AT91=y | |
| CONFIG_SPECIFY_CONSOLE_INDEX=y | |
| CONFIG_DEBUG_UART_ATMEL=y | |
| CONFIG_ATMEL_USART=y | |
| CONFIG_USB=y | |
| CONFIG_DM_USB=y | |
| # CONFIG_SPL_DM_USB is not set | |
| CONFIG_USB_STORAGE=y | |
| CONFIG_USB_GADGET=y | |
| CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" | |
| CONFIG_USB_GADGET_VENDOR_NUM=0x0908 | |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2 | |
| CONFIG_USB_GADGET_DOWNLOAD=y | |
| CONFIG_WDT=y | |
| CONFIG_WDT_AT91=y | |
| CONFIG_HEXDUMP=y |