| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * dfu_mtd.c -- DFU for MTD device. | |
| * | |
| * Copyright (C) 2019,STMicroelectronics - All Rights Reserved | |
| * | |
| * Based on dfu_nand.c | |
| */ | |
| #include <common.h> | |
| #include <dfu.h> | |
| #include <mtd.h> | |
| #include <jffs2/load_kernel.h> | |
| static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size) | |
| { | |
| return !do_div(size, mtd->erasesize); | |
| } | |
| static int mtd_block_op(enum dfu_op op, struct dfu_entity *dfu, | |
| u64 offset, void *buf, long *len) | |
| { | |
| u64 off, lim, remaining; | |
| struct mtd_info *mtd = dfu->data.mtd.info; | |
| struct mtd_oob_ops io_op = {}; | |
| int ret = 0; | |
| bool has_pages = mtd->type == MTD_NANDFLASH || | |
| mtd->type == MTD_MLCNANDFLASH; | |
| /* if buf == NULL return total size of the area */ | |
| if (!buf) { | |
| *len = dfu->data.mtd.size; | |
| return 0; | |
| } | |
| off = dfu->data.mtd.start + offset + dfu->bad_skip; | |
| lim = dfu->data.mtd.start + dfu->data.mtd.size; | |
| if (off >= lim) { | |
| printf("Limit reached 0x%llx\n", lim); | |
| *len = 0; | |
| return op == DFU_OP_READ ? 0 : -EIO; | |
| } | |
| /* limit request with the available size */ | |
| if (off + *len >= lim) | |
| *len = lim - off; | |
| if (!mtd_is_aligned_with_block_size(mtd, off)) { | |
| printf("Offset not aligned with a block (0x%x)\n", | |
| mtd->erasesize); | |
| return 0; | |
| } | |
| /* first erase */ | |
| if (op == DFU_OP_WRITE) { | |
| struct erase_info erase_op = {}; | |
| remaining = round_up(*len, mtd->erasesize); | |
| erase_op.mtd = mtd; | |
| erase_op.addr = off; | |
| erase_op.len = mtd->erasesize; | |
| erase_op.scrub = 0; | |
| while (remaining) { | |
| if (erase_op.addr + remaining > lim) { | |
| printf("Limit reached 0x%llx while erasing at offset 0x%llx\n", | |
| lim, off); | |
| return -EIO; | |
| } | |
| ret = mtd_erase(mtd, &erase_op); | |
| if (ret) { | |
| /* Abort if its not a bad block error */ | |
| if (ret != -EIO) { | |
| printf("Failure while erasing at offset 0x%llx\n", | |
| erase_op.fail_addr); | |
| return 0; | |
| } | |
| printf("Skipping bad block at 0x%08llx\n", | |
| erase_op.addr); | |
| } else { | |
| remaining -= mtd->erasesize; | |
| } | |
| /* Continue erase behind bad block */ | |
| erase_op.addr += mtd->erasesize; | |
| } | |
| } | |
| io_op.mode = MTD_OPS_AUTO_OOB; | |
| io_op.len = *len; | |
| if (has_pages && io_op.len > mtd->writesize) | |
| io_op.len = mtd->writesize; | |
| io_op.ooblen = 0; | |
| io_op.datbuf = buf; | |
| io_op.oobbuf = NULL; | |
| /* Loop over to do the actual read/write */ | |
| remaining = *len; | |
| while (remaining) { | |
| if (off + remaining > lim) { | |
| printf("Limit reached 0x%llx while %s at offset 0x%llx\n", | |
| lim, op == DFU_OP_READ ? "reading" : "writing", | |
| off); | |
| if (op == DFU_OP_READ) { | |
| *len -= remaining; | |
| return 0; | |
| } else { | |
| return -EIO; | |
| } | |
| } | |
| /* Skip the block if it is bad */ | |
| if (mtd_is_aligned_with_block_size(mtd, off) && | |
| mtd_block_isbad(mtd, off)) { | |
| off += mtd->erasesize; | |
| dfu->bad_skip += mtd->erasesize; | |
| continue; | |
| } | |
| if (op == DFU_OP_READ) | |
| ret = mtd_read_oob(mtd, off, &io_op); | |
| else | |
| ret = mtd_write_oob(mtd, off, &io_op); | |
| if (ret) { | |
| printf("Failure while %s at offset 0x%llx\n", | |
| op == DFU_OP_READ ? "reading" : "writing", off); | |
| return -EIO; | |
| } | |
| off += io_op.retlen; | |
| remaining -= io_op.retlen; | |
| io_op.datbuf += io_op.retlen; | |
| io_op.len = remaining; | |
| if (has_pages && io_op.len > mtd->writesize) | |
| io_op.len = mtd->writesize; | |
| } | |
| return ret; | |
| } | |
| static int dfu_get_medium_size_mtd(struct dfu_entity *dfu, u64 *size) | |
| { | |
| *size = dfu->data.mtd.info->size; | |
| return 0; | |
| } | |
| static int dfu_read_medium_mtd(struct dfu_entity *dfu, u64 offset, void *buf, | |
| long *len) | |
| { | |
| int ret = -1; | |
| switch (dfu->layout) { | |
| case DFU_RAW_ADDR: | |
| ret = mtd_block_op(DFU_OP_READ, dfu, offset, buf, len); | |
| break; | |
| default: | |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, | |
| dfu_get_layout(dfu->layout)); | |
| } | |
| return ret; | |
| } | |
| static int dfu_write_medium_mtd(struct dfu_entity *dfu, | |
| u64 offset, void *buf, long *len) | |
| { | |
| int ret = -1; | |
| switch (dfu->layout) { | |
| case DFU_RAW_ADDR: | |
| ret = mtd_block_op(DFU_OP_WRITE, dfu, offset, buf, len); | |
| break; | |
| default: | |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, | |
| dfu_get_layout(dfu->layout)); | |
| } | |
| return ret; | |
| } | |
| static int dfu_flush_medium_mtd(struct dfu_entity *dfu) | |
| { | |
| struct mtd_info *mtd = dfu->data.mtd.info; | |
| u64 remaining; | |
| int ret; | |
| /* in case of ubi partition, erase rest of the partition */ | |
| if (dfu->data.nand.ubi) { | |
| struct erase_info erase_op = {}; | |
| erase_op.mtd = dfu->data.mtd.info; | |
| erase_op.addr = round_up(dfu->data.mtd.start + dfu->offset + | |
| dfu->bad_skip, mtd->erasesize); | |
| erase_op.len = mtd->erasesize; | |
| erase_op.scrub = 0; | |
| remaining = dfu->data.mtd.start + dfu->data.mtd.size - | |
| erase_op.addr; | |
| while (remaining) { | |
| ret = mtd_erase(mtd, &erase_op); | |
| if (ret) { | |
| /* Abort if its not a bad block error */ | |
| if (ret != -EIO) | |
| break; | |
| printf("Skipping bad block at 0x%08llx\n", | |
| erase_op.addr); | |
| } | |
| /* Skip bad block and continue behind it */ | |
| erase_op.addr += mtd->erasesize; | |
| remaining -= mtd->erasesize; | |
| } | |
| } | |
| return 0; | |
| } | |
| static unsigned int dfu_polltimeout_mtd(struct dfu_entity *dfu) | |
| { | |
| /* | |
| * Currently, Poll Timeout != 0 is only needed on nand | |
| * ubi partition, as sectors which are not used need | |
| * to be erased | |
| */ | |
| if (dfu->data.nand.ubi) | |
| return DFU_MANIFEST_POLL_TIMEOUT; | |
| return DFU_DEFAULT_POLL_TIMEOUT; | |
| } | |
| int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s) | |
| { | |
| char *st; | |
| struct mtd_info *mtd; | |
| bool has_pages; | |
| int ret, part; | |
| mtd = get_mtd_device_nm(devstr); | |
| if (IS_ERR_OR_NULL(mtd)) | |
| return -ENODEV; | |
| put_mtd_device(mtd); | |
| dfu->dev_type = DFU_DEV_MTD; | |
| dfu->data.mtd.info = mtd; | |
| has_pages = mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; | |
| dfu->max_buf_size = has_pages ? mtd->erasesize : 0; | |
| st = strsep(&s, " "); | |
| if (!strcmp(st, "raw")) { | |
| dfu->layout = DFU_RAW_ADDR; | |
| dfu->data.mtd.start = simple_strtoul(s, &s, 16); | |
| s++; | |
| dfu->data.mtd.size = simple_strtoul(s, &s, 16); | |
| } else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) { | |
| char mtd_id[32]; | |
| struct mtd_device *mtd_dev; | |
| u8 part_num; | |
| struct part_info *pi; | |
| dfu->layout = DFU_RAW_ADDR; | |
| part = simple_strtoul(s, &s, 10); | |
| sprintf(mtd_id, "%s,%d", devstr, part - 1); | |
| printf("using id '%s'\n", mtd_id); | |
| mtdparts_init(); | |
| ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi); | |
| if (ret != 0) { | |
| printf("Could not locate '%s'\n", mtd_id); | |
| return -1; | |
| } | |
| dfu->data.mtd.start = pi->offset; | |
| dfu->data.mtd.size = pi->size; | |
| if (!strcmp(st, "partubi")) | |
| dfu->data.mtd.ubi = 1; | |
| } else { | |
| printf("%s: Memory layout (%s) not supported!\n", __func__, st); | |
| return -1; | |
| } | |
| if (!mtd_is_aligned_with_block_size(mtd, dfu->data.mtd.start)) { | |
| printf("Offset not aligned with a block (0x%x)\n", | |
| mtd->erasesize); | |
| return -EINVAL; | |
| } | |
| if (!mtd_is_aligned_with_block_size(mtd, dfu->data.mtd.size)) { | |
| printf("Size not aligned with a block (0x%x)\n", | |
| mtd->erasesize); | |
| return -EINVAL; | |
| } | |
| dfu->get_medium_size = dfu_get_medium_size_mtd; | |
| dfu->read_medium = dfu_read_medium_mtd; | |
| dfu->write_medium = dfu_write_medium_mtd; | |
| dfu->flush_medium = dfu_flush_medium_mtd; | |
| dfu->poll_timeout = dfu_polltimeout_mtd; | |
| /* initial state */ | |
| dfu->inited = 0; | |
| return 0; | |
| } |