| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * Copyright 2019 NXP | |
| */ | |
| #ifndef __LS1028A_RDB_H | |
| #define __LS1028A_RDB_H | |
| #include "ls1028a_common.h" | |
| #define CONFIG_SYS_CLK_FREQ 100000000 | |
| #define CONFIG_DDR_CLK_FREQ 100000000 | |
| #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) | |
| #define CONFIG_SYS_RTC_BUS_NUM 0 | |
| /* Store environment at top of flash */ | |
| #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| #define CONFIG_QIXIS_I2C_ACCESS | |
| /* | |
| * QIXIS Definitions | |
| */ | |
| #define CONFIG_FSL_QIXIS | |
| #ifdef CONFIG_FSL_QIXIS | |
| #define QIXIS_BASE 0x7fb00000 | |
| #define QIXIS_BASE_PHYS QIXIS_BASE | |
| #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 | |
| #define QIXIS_LBMAP_SWITCH 2 | |
| #define QIXIS_LBMAP_MASK 0xe0 | |
| #define QIXIS_LBMAP_SHIFT 0x5 | |
| #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| #define QIXIS_LBMAP_ALTBANK 0x00 | |
| #define QIXIS_LBMAP_SD 0x00 | |
| #define QIXIS_LBMAP_EMMC 0x00 | |
| #define QIXIS_LBMAP_QSPI 0x00 | |
| #define QIXIS_RCW_SRC_SD 0xf8 | |
| #define QIXIS_RCW_SRC_EMMC 0xf9 | |
| #define QIXIS_RCW_SRC_QSPI 0xff | |
| #define QIXIS_RST_CTL_RESET 0x31 | |
| #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10 | |
| #define QIXIS_RCFG_CTL_RECONFIG_START 0x11 | |
| #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| #define QIXIS_RST_FORCE_MEM 0x01 | |
| #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) | |
| #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ | |
| CSPR_PORT_SIZE_8 | \ | |
| CSPR_MSEL_GPCM | \ | |
| CSPR_V) | |
| #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ | |
| CSOR_NOR_NOR_MODE_AVD_NOR | \ | |
| CSOR_NOR_TRHZ_80) | |
| #endif | |
| /* SATA */ | |
| #ifndef CONFIG_CMD_EXT2 | |
| #define CONFIG_CMD_EXT2 | |
| #endif | |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 | |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 | |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ | |
| CONFIG_SYS_SCSI_MAX_LUN) | |
| #define SCSI_VEND_ID 0x1b4b | |
| #define SCSI_DEV_ID 0x9170 | |
| #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} | |
| #define CONFIG_SCSI_AHCI_PLAT | |
| #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 | |
| #endif /* __LS1028A_RDB_H */ |