| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> | |
| * | |
| * based on work from: | |
| * (C) Copyright 2009 | |
| * Marvell Semiconductor <www.marvell.com> | |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | |
| */ | |
| #ifndef _CONFIG_NAS220_H | |
| #define _CONFIG_NAS220_H | |
| /* | |
| * Machine type ID | |
| */ | |
| #define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS | |
| /* | |
| * High Level Configuration Options (easy to change) | |
| */ | |
| #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ | |
| #define CONFIG_KW88F6192 /* SOC Name */ | |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ | |
| /* power-on led, regulator, sata0, sata1 */ | |
| #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) | |
| #define NAS220_GE_OE_VAL_HIGH (0) | |
| #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) | |
| #define NAS220_GE_OE_HIGH (~(0)) | |
| /* PHY related */ | |
| #define MV88E1116_LED_FCTRL_REG 10 | |
| #define MV88E1116_CPRSP_CR3_REG 21 | |
| #define MV88E1116_MAC_CTRL_REG 21 | |
| #define MV88E1116_PGADR_REG 22 | |
| #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) | |
| #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) | |
| /* | |
| * Commands configuration | |
| */ | |
| /* | |
| * mv-common.h should be defined after CMD configs since it used them | |
| * to enable certain macros | |
| */ | |
| #include "mv-common.h" | |
| /* | |
| * Environment variables configurations | |
| */ | |
| /* | |
| * Default environment variables | |
| */ | |
| #define CONFIG_BOOTCOMMAND "" | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| "bootargs=console=ttyS0,115200\0" \ | |
| "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ | |
| "0x010000@0xa0000(env),"\ | |
| "0x500000@0xc0000(uimage),"\ | |
| "0x1a40000@0x5c0000(rootfs)\0" \ | |
| "mtdids=nand0=orion_nand\0"\ | |
| "autostart=no\0"\ | |
| "autoload=no\0" | |
| /* | |
| * Ethernet Driver configuration | |
| */ | |
| #ifdef CONFIG_CMD_NET | |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ | |
| #define CONFIG_PHY_BASE_ADR 8 | |
| #endif /* CONFIG_CMD_NET */ | |
| /* | |
| * USB/EHCI | |
| */ | |
| #ifdef CONFIG_CMD_USB | |
| #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ | |
| #define CONFIG_EHCI_IS_TDI | |
| #endif /* CONFIG_CMD_USB */ | |
| /* | |
| * File system | |
| */ | |
| #define CONFIG_JFFS2_NAND | |
| #define CONFIG_JFFS2_LZO | |
| /* | |
| * SATA | |
| */ | |
| #ifdef CONFIG_MVSATA_IDE | |
| #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
| #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET | |
| #endif | |
| /* | |
| * EFI partition | |
| */ | |
| #define CONFIG_KIRKWOOD_GPIO | |
| #endif /* _CONFIG_NAS220_H */ | |