| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2011, 2013 Renesas Solutions Corp. | |
| * Copyright (C) 2011, 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> | |
| * | |
| * NOTE: This driver should be converted to driver model before June 2017. | |
| * Please see doc/driver-model/i2c-howto.rst for instructions. | |
| */ | |
| #include <common.h> | |
| #include <i2c.h> | |
| #include <log.h> | |
| #include <asm/global_data.h> | |
| #include <asm/io.h> | |
| #include <linux/delay.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /* Every register is 32bit aligned, but only 8bits in size */ | |
| #define ureg(name) u8 name; u8 __pad_##name##0; u16 __pad_##name##1; | |
| struct sh_i2c { | |
| ureg(icdr); | |
| ureg(iccr); | |
| ureg(icsr); | |
| ureg(icic); | |
| ureg(iccl); | |
| ureg(icch); | |
| }; | |
| #undef ureg | |
| /* ICCR */ | |
| #define SH_I2C_ICCR_ICE (1 << 7) | |
| #define SH_I2C_ICCR_RACK (1 << 6) | |
| #define SH_I2C_ICCR_RTS (1 << 4) | |
| #define SH_I2C_ICCR_BUSY (1 << 2) | |
| #define SH_I2C_ICCR_SCP (1 << 0) | |
| /* ICSR / ICIC */ | |
| #define SH_IC_BUSY (1 << 4) | |
| #define SH_IC_TACK (1 << 2) | |
| #define SH_IC_WAIT (1 << 1) | |
| #define SH_IC_DTE (1 << 0) | |
| #ifdef CONFIG_SH_I2C_8BIT | |
| /* store 8th bit of iccl and icch in ICIC register */ | |
| #define SH_I2C_ICIC_ICCLB8 (1 << 7) | |
| #define SH_I2C_ICIC_ICCHB8 (1 << 6) | |
| #endif | |
| static const struct sh_i2c *i2c_dev[CONFIG_SYS_I2C_SH_NUM_CONTROLLERS] = { | |
| (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE0, | |
| #ifdef CONFIG_SYS_I2C_SH_BASE1 | |
| (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE1, | |
| #endif | |
| #ifdef CONFIG_SYS_I2C_SH_BASE2 | |
| (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE2, | |
| #endif | |
| #ifdef CONFIG_SYS_I2C_SH_BASE3 | |
| (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE3, | |
| #endif | |
| #ifdef CONFIG_SYS_I2C_SH_BASE4 | |
| (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE4, | |
| #endif | |
| }; | |
| static u16 iccl, icch; | |
| #define IRQ_WAIT 1000 | |
| static void sh_irq_dte(struct sh_i2c *dev) | |
| { | |
| int i; | |
| for (i = 0; i < IRQ_WAIT; i++) { | |
| if (SH_IC_DTE & readb(&dev->icsr)) | |
| break; | |
| udelay(10); | |
| } | |
| } | |
| static int sh_irq_dte_with_tack(struct sh_i2c *dev) | |
| { | |
| int i; | |
| for (i = 0; i < IRQ_WAIT; i++) { | |
| if (SH_IC_DTE & readb(&dev->icsr)) | |
| break; | |
| if (SH_IC_TACK & readb(&dev->icsr)) | |
| return -1; | |
| udelay(10); | |
| } | |
| return 0; | |
| } | |
| static void sh_irq_busy(struct sh_i2c *dev) | |
| { | |
| int i; | |
| for (i = 0; i < IRQ_WAIT; i++) { | |
| if (!(SH_IC_BUSY & readb(&dev->icsr))) | |
| break; | |
| udelay(10); | |
| } | |
| } | |
| static int sh_i2c_set_addr(struct sh_i2c *dev, u8 chip, u8 addr, int stop) | |
| { | |
| u8 icic = SH_IC_TACK; | |
| debug("%s: chip: %x, addr: %x iccl: %x, icch %x\n", | |
| __func__, chip, addr, iccl, icch); | |
| clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE); | |
| setbits_8(&dev->iccr, SH_I2C_ICCR_ICE); | |
| writeb(iccl & 0xff, &dev->iccl); | |
| writeb(icch & 0xff, &dev->icch); | |
| #ifdef CONFIG_SH_I2C_8BIT | |
| if (iccl > 0xff) | |
| icic |= SH_I2C_ICIC_ICCLB8; | |
| if (icch > 0xff) | |
| icic |= SH_I2C_ICIC_ICCHB8; | |
| #endif | |
| writeb(icic, &dev->icic); | |
| writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr); | |
| sh_irq_dte(dev); | |
| clrbits_8(&dev->icsr, SH_IC_TACK); | |
| writeb(chip << 1, &dev->icdr); | |
| if (sh_irq_dte_with_tack(dev) != 0) | |
| return -1; | |
| writeb(addr, &dev->icdr); | |
| if (stop) | |
| writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &dev->iccr); | |
| if (sh_irq_dte_with_tack(dev) != 0) | |
| return -1; | |
| return 0; | |
| } | |
| static void sh_i2c_finish(struct sh_i2c *dev) | |
| { | |
| writeb(0, &dev->icsr); | |
| clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE); | |
| } | |
| static int | |
| sh_i2c_raw_write(struct sh_i2c *dev, u8 chip, uint addr, u8 val) | |
| { | |
| int ret = -1; | |
| if (sh_i2c_set_addr(dev, chip, addr, 0) != 0) | |
| goto exit0; | |
| udelay(10); | |
| writeb(val, &dev->icdr); | |
| if (sh_irq_dte_with_tack(dev) != 0) | |
| goto exit0; | |
| writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &dev->iccr); | |
| if (sh_irq_dte_with_tack(dev) != 0) | |
| goto exit0; | |
| sh_irq_busy(dev); | |
| ret = 0; | |
| exit0: | |
| sh_i2c_finish(dev); | |
| return ret; | |
| } | |
| static int sh_i2c_raw_read(struct sh_i2c *dev, u8 chip, u8 addr) | |
| { | |
| int ret = -1; | |
| if (sh_i2c_set_addr(dev, chip, addr, 1) != 0) | |
| goto exit0; | |
| udelay(100); | |
| writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr); | |
| sh_irq_dte(dev); | |
| writeb(chip << 1 | 0x01, &dev->icdr); | |
| if (sh_irq_dte_with_tack(dev) != 0) | |
| goto exit0; | |
| writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &dev->iccr); | |
| if (sh_irq_dte_with_tack(dev) != 0) | |
| goto exit0; | |
| ret = readb(&dev->icdr) & 0xff; | |
| writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &dev->iccr); | |
| readb(&dev->icdr); /* Dummy read */ | |
| sh_irq_busy(dev); | |
| exit0: | |
| sh_i2c_finish(dev); | |
| return ret; | |
| } | |
| static void | |
| sh_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) | |
| { | |
| int num, denom, tmp; | |
| /* No i2c support prior to relocation */ | |
| if (!(gd->flags & GD_FLG_RELOC)) | |
| return; | |
| /* | |
| * Calculate the value for iccl. From the data sheet: | |
| * iccl = (p-clock / transfer-rate) * (L / (L + H)) | |
| * where L and H are the SCL low and high ratio. | |
| */ | |
| num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_LOW; | |
| denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW); | |
| tmp = num * 10 / denom; | |
| if (tmp % 10 >= 5) | |
| iccl = (u16)((num/denom) + 1); | |
| else | |
| iccl = (u16)(num/denom); | |
| /* Calculate the value for icch. From the data sheet: | |
| icch = (p clock / transfer rate) * (H / (L + H)) */ | |
| num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH; | |
| tmp = num * 10 / denom; | |
| if (tmp % 10 >= 5) | |
| icch = (u16)((num/denom) + 1); | |
| else | |
| icch = (u16)(num/denom); | |
| debug("clock: %d, speed %d, iccl: %x, icch: %x\n", | |
| CONFIG_SH_I2C_CLOCK, speed, iccl, icch); | |
| } | |
| static int sh_i2c_read(struct i2c_adapter *adap, uint8_t chip, | |
| uint addr, int alen, u8 *data, int len) | |
| { | |
| int ret, i; | |
| struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr]; | |
| for (i = 0; i < len; i++) { | |
| ret = sh_i2c_raw_read(dev, chip, addr + i); | |
| if (ret < 0) | |
| return -1; | |
| data[i] = ret & 0xff; | |
| debug("%s: data[%d]: %02x\n", __func__, i, data[i]); | |
| } | |
| return 0; | |
| } | |
| static int sh_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr, | |
| int alen, u8 *data, int len) | |
| { | |
| struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr]; | |
| int i; | |
| for (i = 0; i < len; i++) { | |
| debug("%s: data[%d]: %02x\n", __func__, i, data[i]); | |
| if (sh_i2c_raw_write(dev, chip, addr + i, data[i]) != 0) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int | |
| sh_i2c_probe(struct i2c_adapter *adap, u8 dev) | |
| { | |
| u8 dummy[1]; | |
| return sh_i2c_read(adap, dev, 0, 0, dummy, sizeof dummy); | |
| } | |
| static unsigned int sh_i2c_set_bus_speed(struct i2c_adapter *adap, | |
| unsigned int speed) | |
| { | |
| struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr]; | |
| sh_i2c_finish(dev); | |
| sh_i2c_init(adap, speed, 0); | |
| return 0; | |
| } | |
| /* | |
| * Register RCAR i2c adapters | |
| */ | |
| U_BOOT_I2C_ADAP_COMPLETE(sh_0, sh_i2c_init, sh_i2c_probe, sh_i2c_read, | |
| sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 0) | |
| #ifdef CONFIG_SYS_I2C_SH_BASE1 | |
| U_BOOT_I2C_ADAP_COMPLETE(sh_1, sh_i2c_init, sh_i2c_probe, sh_i2c_read, | |
| sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 1) | |
| #endif | |
| #ifdef CONFIG_SYS_I2C_SH_BASE2 | |
| U_BOOT_I2C_ADAP_COMPLETE(sh_2, sh_i2c_init, sh_i2c_probe, sh_i2c_read, | |
| sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 2) | |
| #endif | |
| #ifdef CONFIG_SYS_I2C_SH_BASE3 | |
| U_BOOT_I2C_ADAP_COMPLETE(sh_3, sh_i2c_init, sh_i2c_probe, sh_i2c_read, | |
| sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 3) | |
| #endif | |
| #ifdef CONFIG_SYS_I2C_SH_BASE4 | |
| U_BOOT_I2C_ADAP_COMPLETE(sh_4, sh_i2c_init, sh_i2c_probe, sh_i2c_read, | |
| sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, 0, 4) | |
| #endif |