| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Bootmethod for distro boot via EFI | |
| * | |
| * Copyright 2021 Google LLC | |
| * Written by Simon Glass <sjg@chromium.org> | |
| */ | |
| #define LOG_CATEGORY UCLASS_BOOTSTD | |
| #include <bootdev.h> | |
| #include <bootflow.h> | |
| #include <bootmeth.h> | |
| #include <command.h> | |
| #include <dm.h> | |
| #include <efi.h> | |
| #include <efi_loader.h> | |
| #include <env.h> | |
| #include <extension_board.h> | |
| #include <fs.h> | |
| #include <malloc.h> | |
| #include <mapmem.h> | |
| #include <mmc.h> | |
| #include <net.h> | |
| #include <pxe_utils.h> | |
| #include <linux/sizes.h> | |
| #define EFI_DIRNAME "/EFI/BOOT/" | |
| static int get_efi_pxe_vci(char *str, int max_len) | |
| { | |
| int ret; | |
| ret = efi_get_pxe_arch(); | |
| if (ret < 0) | |
| return ret; | |
| snprintf(str, max_len, "PXEClient:Arch:%05x:UNDI:003000", ret); | |
| return 0; | |
| } | |
| /** | |
| * bootmeth_uses_network() - check if the media device is Ethernet | |
| * | |
| * @bflow: Bootflow to check | |
| * Returns: true if the media device is Ethernet, else false | |
| */ | |
| static bool bootmeth_uses_network(struct bootflow *bflow) | |
| { | |
| const struct udevice *media = dev_get_parent(bflow->dev); | |
| return IS_ENABLED(CONFIG_CMD_DHCP) && | |
| device_get_uclass_id(media) == UCLASS_ETH; | |
| } | |
| static int efiload_read_file(struct bootflow *bflow, ulong addr) | |
| { | |
| struct blk_desc *desc = NULL; | |
| ulong size; | |
| int ret; | |
| if (bflow->blk) | |
| desc = dev_get_uclass_plat(bflow->blk); | |
| size = SZ_1G; | |
| ret = bootmeth_common_read_file(bflow->method, bflow, bflow->fname, | |
| addr, BFI_EFI, &size); | |
| if (ret) | |
| return log_msg_ret("rdf", ret); | |
| bflow->buf = map_sysmem(addr, bflow->size); | |
| return 0; | |
| } | |
| static int distro_efi_check(struct udevice *dev, struct bootflow_iter *iter) | |
| { | |
| /* This only works on block and network devices */ | |
| if (bootflow_iter_check_blk(iter) && bootflow_iter_check_net(iter)) | |
| return log_msg_ret("blk", -ENOTSUPP); | |
| /* This works on block devices and network devices */ | |
| if (iter->method_flags & BOOTFLOW_METHF_PXE_ONLY) | |
| return log_msg_ret("pxe", -ENOTSUPP); | |
| return 0; | |
| } | |
| /* | |
| * distro_efi_try_bootflow_files() - Check that files are present | |
| * | |
| * This reads any FDT file and checks whether the bootflow file is present, for | |
| * later reading. We avoid reading the bootflow now, since it is likely large, | |
| * it may take a long time and we want to avoid needing to allocate memory for | |
| * it | |
| * | |
| * @dev: bootmeth device to use | |
| * @bflow: bootflow to update | |
| */ | |
| static int distro_efi_try_bootflow_files(struct udevice *dev, | |
| struct bootflow *bflow) | |
| { | |
| ulong fdt_addr, size, overlay_addr; | |
| const struct extension *extension; | |
| struct fdt_header *working_fdt; | |
| struct blk_desc *desc = NULL; | |
| struct alist *extension_list; | |
| char fname[256]; | |
| int ret, seq; | |
| /* We require a partition table */ | |
| if (!bflow->part) { | |
| log_debug("no partitions\n"); | |
| return -ENOENT; | |
| } | |
| strcpy(fname, EFI_DIRNAME); | |
| strcat(fname, efi_get_basename()); | |
| if (bflow->blk) | |
| desc = dev_get_uclass_plat(bflow->blk); | |
| ret = bootmeth_try_file(bflow, desc, NULL, fname); | |
| if (ret) { | |
| log_debug("File '%s' not found\n", fname); | |
| return log_msg_ret("try", ret); | |
| } | |
| /* Since we can access the file, let's call it ready */ | |
| bflow->state = BOOTFLOWST_READY; | |
| fdt_addr = env_get_hex("fdt_addr_r", 0); | |
| /* try the various available names */ | |
| ret = -ENOENT; | |
| *fname = '\0'; | |
| for (seq = 0; ret == -ENOENT; seq++) { | |
| ret = efi_get_distro_fdt_name(fname, sizeof(fname), seq); | |
| if (ret == -EALREADY) | |
| bflow->flags = BOOTFLOWF_USE_PRIOR_FDT; | |
| if (!ret) { | |
| /* Limit FDT files to 4MB */ | |
| size = SZ_4M; | |
| ret = bootmeth_common_read_file(dev, bflow, fname, | |
| fdt_addr, (enum bootflow_img_t)IH_TYPE_FLATDT, | |
| &size); | |
| } | |
| } | |
| if (*fname) { | |
| bflow->fdt_fname = strdup(fname); | |
| if (!bflow->fdt_fname) | |
| return log_msg_ret("fil", -ENOMEM); | |
| } | |
| if (ret) { | |
| log_debug("No device tree available\n"); | |
| bflow->flags |= BOOTFLOWF_USE_BUILTIN_FDT; | |
| return 0; | |
| } | |
| bflow->fdt_size = size; | |
| bflow->fdt_addr = fdt_addr; | |
| if (!CONFIG_IS_ENABLED(SUPPORT_EXTENSION_SCAN)) | |
| return 0; | |
| ret = extension_scan(); | |
| if (ret < 0) | |
| return 0; | |
| extension_list = extension_get_list(); | |
| if (!extension_list) | |
| return 0; | |
| working_fdt = map_sysmem(fdt_addr, 0); | |
| if (fdt_check_header(working_fdt)) | |
| return 0; | |
| overlay_addr = env_get_hex("extension_overlay_addr", 0); | |
| if (!overlay_addr) { | |
| log_debug("Environment extension_overlay_addr is missing\n"); | |
| return 0; | |
| } | |
| alist_for_each(extension, extension_list) { | |
| char *overlay_file; | |
| int len; | |
| len = sizeof(EFI_DIRNAME) + strlen(extension->overlay); | |
| overlay_file = calloc(1, len); | |
| if (!overlay_file) | |
| return -ENOMEM; | |
| snprintf(overlay_file, len, "%s%s", EFI_DIRNAME, | |
| extension->overlay); | |
| ret = bootmeth_common_read_file(dev, bflow, overlay_file, | |
| overlay_addr, | |
| (enum bootflow_img_t)IH_TYPE_FLATDT, | |
| &size); | |
| if (ret) { | |
| log_debug("Failed loading overlay %s\n", overlay_file); | |
| free(overlay_file); | |
| continue; | |
| } | |
| ret = extension_apply(working_fdt, size); | |
| if (ret) { | |
| log_debug("Failed applying overlay %s\n", overlay_file); | |
| free(overlay_file); | |
| continue; | |
| } | |
| bflow->fdt_size += size; | |
| free(overlay_file); | |
| } | |
| return 0; | |
| } | |
| static int distro_efi_read_bootflow_net(struct bootflow *bflow) | |
| { | |
| char file_addr[17], fname[256]; | |
| char *tftp_argv[] = {"tftp", file_addr, fname, NULL}; | |
| struct cmd_tbl cmdtp = {}; /* dummy */ | |
| const char *addr_str, *fdt_addr_str, *bootfile_name; | |
| int ret, arch, size; | |
| ulong addr, fdt_addr; | |
| char str[36]; | |
| ret = get_efi_pxe_vci(str, sizeof(str)); | |
| if (ret) | |
| return log_msg_ret("vci", ret); | |
| ret = efi_get_pxe_arch(); | |
| if (ret < 0) | |
| return log_msg_ret("arc", ret); | |
| arch = ret; | |
| ret = env_set("bootp_vci", str); | |
| if (ret) | |
| return log_msg_ret("vcs", ret); | |
| ret = env_set_hex("bootp_arch", arch); | |
| if (ret) | |
| return log_msg_ret("ars", ret); | |
| /* figure out the load address */ | |
| addr_str = env_get("kernel_addr_r"); | |
| addr = addr_str ? hextoul(addr_str, NULL) : image_load_addr; | |
| /* clear any previous bootfile */ | |
| env_set("bootfile", NULL); | |
| /* read the kernel */ | |
| ret = dhcp_run(addr, NULL, true); | |
| if (ret) | |
| return log_msg_ret("dhc", ret); | |
| size = env_get_hex("filesize", -1); | |
| if (size <= 0) | |
| return log_msg_ret("sz", -EINVAL); | |
| bflow->size = size; | |
| bflow->buf = map_sysmem(addr, size); | |
| /* bootfile should be setup by dhcp */ | |
| bootfile_name = env_get("bootfile"); | |
| if (!bootfile_name) | |
| return log_msg_ret("bootfile_name", ret); | |
| bflow->fname = strdup(bootfile_name); | |
| if (!bflow->fname) | |
| return log_msg_ret("fi0", -ENOMEM); | |
| /* read the DT file also */ | |
| ret = efi_get_distro_fdt_name(fname, sizeof(fname), 0); | |
| if (ret == -EALREADY) { | |
| /* Prior-stage FDT is used, no download needed */ | |
| bflow->flags |= BOOTFLOWF_USE_PRIOR_FDT; | |
| bflow->state = BOOTFLOWST_READY; | |
| return 0; | |
| } else if (ret) { | |
| return log_msg_ret("nam", ret); | |
| } | |
| fdt_addr_str = env_get("fdt_addr_r"); | |
| if (!fdt_addr_str) | |
| return log_msg_ret("fdt", -EINVAL); | |
| fdt_addr = hextoul(fdt_addr_str, NULL); | |
| sprintf(file_addr, "%lx", fdt_addr); | |
| bflow->fdt_fname = strdup(fname); | |
| if (!bflow->fdt_fname) | |
| return log_msg_ret("fil", -ENOMEM); | |
| if (!do_tftpb(&cmdtp, 0, 3, tftp_argv)) { | |
| bflow->fdt_size = env_get_hex("filesize", 0); | |
| bflow->fdt_addr = fdt_addr; | |
| } else { | |
| log_debug("No device tree available\n"); | |
| bflow->flags |= BOOTFLOWF_USE_BUILTIN_FDT; | |
| } | |
| bflow->state = BOOTFLOWST_READY; | |
| return 0; | |
| } | |
| static int distro_efi_read_bootflow(struct udevice *dev, struct bootflow *bflow) | |
| { | |
| int ret; | |
| log_debug("dev='%s', part=%d\n", bflow->dev->name, bflow->part); | |
| /* | |
| * bootmeth_efi doesn't allocate any buffer neither for blk nor net device | |
| * set flag to avoid freeing static buffer. | |
| */ | |
| bflow->flags |= BOOTFLOWF_STATIC_BUF; | |
| if (bootmeth_uses_network(bflow)) { | |
| /* we only support reading from one device, so ignore 'dev' */ | |
| ret = distro_efi_read_bootflow_net(bflow); | |
| if (ret) | |
| return log_msg_ret("net", ret); | |
| } else { | |
| ret = distro_efi_try_bootflow_files(dev, bflow); | |
| if (ret) | |
| return log_msg_ret("blk", ret); | |
| } | |
| return 0; | |
| } | |
| static int distro_efi_boot(struct udevice *dev, struct bootflow *bflow) | |
| { | |
| ulong kernel, fdt; | |
| int ret; | |
| log_debug("distro EFI boot\n"); | |
| kernel = env_get_hex("kernel_addr_r", 0); | |
| if (!bootmeth_uses_network(bflow)) { | |
| ret = efiload_read_file(bflow, kernel); | |
| if (ret) | |
| return log_msg_ret("read", ret); | |
| /* | |
| * use the provided device tree if not using the built-in fdt | |
| */ | |
| if (bflow->flags & ~BOOTFLOWF_USE_BUILTIN_FDT) | |
| fdt = bflow->fdt_addr; | |
| } | |
| if (efi_bootflow_run(bflow)) | |
| return log_msg_ret("run", -EINVAL); | |
| return 0; | |
| } | |
| static int distro_bootmeth_efi_bind(struct udevice *dev) | |
| { | |
| struct bootmeth_uc_plat *plat = dev_get_uclass_plat(dev); | |
| plat->desc = IS_ENABLED(CONFIG_BOOTSTD_FULL) ? | |
| "EFI boot from an .efi file" : "EFI"; | |
| return 0; | |
| } | |
| static struct bootmeth_ops distro_efi_bootmeth_ops = { | |
| .check = distro_efi_check, | |
| .read_bootflow = distro_efi_read_bootflow, | |
| .read_file = bootmeth_common_read_file, | |
| .boot = distro_efi_boot, | |
| }; | |
| static const struct udevice_id distro_efi_bootmeth_ids[] = { | |
| { .compatible = "u-boot,distro-efi" }, | |
| { } | |
| }; | |
| /* Put a number before 'efi' to provide a default ordering */ | |
| U_BOOT_DRIVER(bootmeth_4efi) = { | |
| .name = "bootmeth_efi", | |
| .id = UCLASS_BOOTMETH, | |
| .of_match = distro_efi_bootmeth_ids, | |
| .ops = &distro_efi_bootmeth_ops, | |
| .bind = distro_bootmeth_efi_bind, | |
| }; |